Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mg(CoN)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Materials Data on Mg(CoN)2 by Materials Project

Mg(CoN)2 crystallizes in the tetragonal P-4m2 space group. The structure is two-dimensional and consists of one Mg(CoN)2 sheet oriented in the (0, 0, 1) direction. Mg2+ is bonded to four equivalent N3- atoms to form corner-sharing MgN4 tetrahedra. All Mg–N bond lengths are 2.18 Å. Co2+ is bonded in a linear geometry to two equivalent N3- atoms. Both Co–N bond lengths are 1.73 Å. N3- is bonded in a see-saw-like geometry to two equivalent Mg2+ and two equivalent Co2+ atoms.

36 MATERIALS SCIENCE↗

Examining Weathering of Magnesite in an Arid Environment: Implications For Jezero Crater

Introduction:Orbiter data indicatethe presence of carbonates in severallocations on the surface of Mars[1],but Jezero crater, landing site of the Perseverancerover,is the only known location where carbonatesap-pear coincident with evidence of fluvialand lacustrineactivity [2].On Earth, carbonates in close proximity to these paleoenvironments mayindicatethe presence of past microbial life,like stromatolites[3], that could re-sult inbiosignatures [2]. However,in other cases,car-bonates can also form throughthe alteration of mafic materialwiththe introductionof carbonic acid[4].Hy-drated magnesites have also been found in evaporative environments along lake shores, and in playas[5,6,7].Correctly interpreting past carbonates on Mars is there-fore critical in the search for past signs of life. In Jezero crater,both thenorthernand western fans haveMg-rich carbonates intermixed with olivine-rich material[8].According to CRISM data, magnesite(MgCO3), along with hydromagnesite(Mg5(CO3)4(OH)2•4H2O), arepotential candidatesfor these Mg-carbonates [2]. Considering the spatial con-text with olivine,there aremultiplepotential explana-tions for the presence ofMg-carbonatesin this locationincludingin-situformation via alterationof olivine-rich materialwith carbonic acid,transportationfrom farther up in the watershed, or precipitation of lacustrine car-bonates[2]. The formation of hydromagnesite rather than magnesite is favored when Mg2+saturated solutions have a high CO32-/HCO3-ratio, which, on Earth, is thought to be caused byinflow of groundwater [4]. Additionally, Mg-carbonates tend to precipitate under high pH condi-tions and are unstable at lower pH conditions [5]. Hy-dromagnesite is stable at atmospheric CO2pressure and temperature conditions common to most Earth surface environments [9]. However, it is subject to transfor-mation to magnesite after dehydration and concomitant brucite formation or dissolution and reprecipitation [10].Previousresearch suggests that hydrated car-bonates, including hydromagnesite, can formas weath-ering productsof mafic minerals in the presenceof H2O and CO2in subfreezing temperatures and would not de-hydrate under Martian atmospheric conditions [11,12].It is critical to understand the formation conditions of Mg-carbonatesbecause of the different implications for the past history of Martian environments. Therefore, in this work we are investigating the weathering of Mg-carbonatesin arid environments to helpbetter understand Mg-carbonates in Jezero crater. Study Area:The Ala-Mar Mines(East and West)near Ely, NVare the site ofmultiple magnesitedepositsfound within a calcareous tuff formationthat overlies Tertiary aged volcanic rocks.Here,magnesiteis formed via the alteration of the calcareous tuff and occurs innodules, veins,and lenses[13]. Previous work suggests magnesite deposits are associated with faults [13]. Within the West Mine, magnesite can be found in two maincontexts: (1) relatively circular zones of cauli-flower-like material found within (2) a more massivelensthat is heavily fractured on the surface.Methods.Samplesof both the cauliflower texture and more massive materialwere collectedat Ala Mar West Mine. Both samples were thenpowdered, sieved and analyzed with an inXitu Terra Portable XRD. The program QualX was used to identify potential mineral phases [14].Both samples were also optically inspected using 10x and 20x hand lenses.Figure 1. XRD patterns for the cauliflower magnesite (top) and massive magnesite (bottom). Ongoing and future work on the samples discussed above includes scanning electron microscopy (SEM), electron microprobe analysis (EMPA), and near-infra-red spectroscopy to determine whether hydromagnesite is present. Separation and analysis of the clay-size frac-tionby XRD will helpto better identify any phyllosili-cate phases present. Results and Discussion:Both textures are a white to light tan with a porcelain luster on weathered sur-faces, along with minor iron staining in some areas. Likewise, both textures are white with a porcelain luster on fresh surfaces. When broken apart, the massive mag-nesite shows macroscopic crystals, unlike the cauli-flower magnesite. XRD analysis shows that both samples have high concentrationsof magnesite with lesser amounts of thecarbonatemineral huntite(Mg3Ca(CO3)4; Figure1).The more massive samplecontainsa serpentine-groupmineral,with lizardite being apotential candidate. The cauliflower sample has several minor peaks that may correspond to hydromagnesite(Figure 1), although more work is needed to confirm this.Additionally, thecauliflower deposits closely resemble hydromagnesite deposits found in southwestern Turkey, formed via mi-crobialites[15].As such, it is likely that moreaqueous alterationor weatheringis occurring at the locations where the cauliflower magnesite is present. However, additional field work will need to be conducted to con-firm this hypothesis. Conclusions and Future Work:Future work will include field mapping of fault locations andadditional samplingof the different magnesite types as well as of the calcareous tuffmaterial.We will also look specifi-cally for potential weathering products of magnesite in this arid location, which may yield important insight into the Mg-carbonates located in Jezero crater. XRD analyses on aPANalytical XRDusing non-ambient stages will be used to investigate the stability of hydro-magnesiteat different humiditiesand temperatures, which has implications for samples to bereturned to Earth in the future. Additionally, thermal and evolved gas analysis of magnesite and hydromagnesite will be compared to results from Gale Craterto help interpret the mineralogy inthat location[16]. The results of this research will further ourunderstanding of carbonate for-mationin volcanic settingsandtheirweathering pro-cessesin arid environments. Acknowledgments:We acknowledge funding for this research from Jacobs Technology at the Johnson Space Center.We would also like to thank Ngoc Luu, Christopher Adcock, Richard Allanson, and the rest of the UNLV Soil Science Teamfor their continued sup-portwith troubleshooting and otherlab work. References:[1] Ehlmann, B.L., and Edwards, C.S. (2014) Annual Review of Earth and Planetary Sci., 42, 291–315. [2] Horgan, B.H.N., et al. (2020) Icarus, 339, 113526. [3] Bosak, T., et al. (2013) Annual Review of Earth and Planetary Sci, 41, 21–44. [4] Pohl, W.L. (1989) Gebriider Borntraege, 28, 1-13. [5] Müller, G., et al. (1972) Die Naturwissenschaften, 59, 158–164. [6] Walter, M.R., et al. (1973) Journal of Sedimentary Pe-trology, 43, 1021–1030. [7] Braithwaite, C.J.R., and Zedef, V. (1994) Sedimentary Geology, 92, 1–5. [8] Goudge, T.A., et al. (2015) JGR: Planets, 120, 775–808. [9] Langmuir, D. (1965) Journal of Geology, 73, 730–754. [10] Zhang, P., et al. (2000) Applied Geo-chem., 286, 1748–1753. [11] Calvin, W.M., et al. (1994) JGR, 99, 14659-14675. [12]Russell, M.J., et al. (1999) Journal of the Geological Society of London, v. 156, p. 869–888. [13] Faust, G.T., and Callaghan, E. (1948) GSA Bulletin, 59, 11–74. [14] Altomare, A., et al. (2015) J. of Applied Crystallography, 48, 598–603. [15] Zedef, V.,et al. (2000) Economic Geology, 95, 429–445. [16] Leshin, L.A. et al., (2013) Science, 341, 1–9

A W Provow↗

Maintenance of myonuclear domain size in rat soleus after overload and growth hormone/IGF-I treatment

The purpose of this study was to determine the effects of functional overload (FO) combined with growth hormone/insulin-like growth factor I (GH/IGF-I) administration on myonuclear number and domain size in rat soleus muscle fibers. Adult female rats underwent bilateral ablation of the plantaris and gastrocnemius muscles and, after 7 days of recovery, were injected three times daily for 14 days with GH/IGF-I (1 mg/kg each; FO + GH/IGF-I group) or saline vehicle (FO group). Intact rats receiving saline vehicle served as controls (Con group). Muscle wet weight was 32% greater in the FO than in the Con group: 162 +/- 8 vs. 123 +/- 16 mg. Muscle weight in the FO + GH/IGF-I group (196 +/- 14 mg) was 59 and 21% larger than in the Con and FO groups, respectively. Mean soleus fiber cross-sectional area of the FO + GH/IGF-I group (2,826 +/- 445 microm2) was increased compared with the Con (2,044 +/- 108 microm2) and FO (2,267 +/- 301 microm2) groups. The difference in fiber size between the FO and Con groups was not significant. Mean myonuclear number increased in FO (187 +/- 15 myonuclei/mm) and FO + GH/IGF-I (217 +/- 23 myonuclei/mm) rats compared with Con (155 +/- 12 myonuclei/mm) rats, although the difference between FO and FO + GH/IGF-I animals was not significant. The mean cytoplasmic volume per myonucleus (myonuclear domain) was similar across groups. These results demonstrate that the larger mean muscle weight and fiber cross-sectional area occurred when FO was combined with GH/IGF-I administration and that myonuclear number increased concomitantly with fiber volume. Thus there appears to be some mechanism(s) that maintains the myonuclear domain when a fiber hypertrophies.

NASA Discipline Musculoskeletal↗

Effect of biochanin A on the rumen microbial community of Holstein steers consuming a high fiber diet and subjected to a subacute acidosis challenge

Subacute rumen acidosis (SARA) occurs when highly fermentable carbohydrates are introduced into the diet, decreasing pH and disturbing the microbial ecology of the rumen. Rumen amylolytic bacteria rapidly catabolize starch, fermentation acids accumulate in the rumen and reduce environmental pH. Historically, antibiotics ( e . g ., monensin, MON) have been used in the prevention and treatment of SARA. Biochanin A (BCA), an isoflavone produced by red clover ( Trifolium pratense ), mitigates changes associated with starch fermentation ex vivo . The objective of the study was to determine the effect of BCA on amylolytic bacteria and rumen pH during a SARA challenge. Twelve rumen fistulated steers were assigned to 1 of 4 treatments: HF CON (high fiber control), SARA CON, MON (200 mg d -1 ), or BCA (6 g d -1 ). The basal diet consisted of corn silage and dried distiller’s grains ad libitum . The study consisted of a 2-wk adaptation, a 1-wk HF period, and an 8-d SARA challenge (d 1–4: 40% corn; d 5–8: 70% cracked corn). Samples for pH and enumeration were taken on the last day of each period (4 h). Amylolytic, cellulolytic, and amino acid/peptide-fermenting bacteria (APB) were enumerated. Enumeration data were normalized by log transformation and data were analyzed by repeated measures ANOVA using the MIXED procedure of SAS. The SARA challenge increased total amylolytics and APB, but decreased pH, cellulolytics, and in situ DMD of hay (P < 0.05). BCA treatment counteracted the pH, microbiological, and fermentative changes associated with SARA challenge (P < 0.05). Similar results were also observed with MON (P < 0.05). These results indicate that BCA may be an effective alternative to antibiotics for mitigating SARA in cattle production systems.

59 BASIC BIOLOGICAL SCIENCES↗

The Valence of Iron in CM Chondrite Serpentine as Measured by Synchrotron Xanes

Fe-bearing phyllosilicates are the dominant product of aqueous alteration in carbonaceous chondrites, and serpentine is the most abundant phyllosilicate in CM2 chondrites that are the most abundant carbonaceous chondrite. Browning et al. predicted that Fe(3+)/(sum of Fe) ratios of serpentine in CM chondrites should change with progressive alteration. They proposed that progressive CM alteration is best monitored by evaluating the progress of Si and Fe3+ substitutions that necessarily attend the transition from end-member cronstedtite to serpentine. Their proposed Mineralogic Alteration Index, 2-(Fe(3+)/(2-Si)), was intended to highlight and utilize the relevant ex-change information in the stoichiometric phyllosilicate formulas based upon the coupled substitution of 2(Fe(3+), Al) = Si + (Mg, Fe(2+)...) in serpentine. The value of this ratio increases as alteration proceeds. We always wanted to directly test Browning s pre-diction through actual measurements of the Fe3+ con-tent of serpentine at the micron scale appropriate to EPMA analyses (Zega et al. have measured it at much finer scale), and this test can now be made using Synchrotron Radiation X-ray Absorption Near-Edge Structure (SR-XANES). Thus, we have recently begun investigation with CMs that span a large portion of the range of observed aqueous alteration, and we first analyzed Murray, Nogoya, and ALH84029 by SR-XANES. However, we did not find clear correlation between Fe3+/(sum of Fe) ratios of serpentine and their alteration degrees. We thus analyzed serpentine in three more CMs and here report their Fe3+/(sum of Fe) ratios in comparison with our previous results.

Mikouchi, T.↗

Physical origins of the varying performance and unusual transport behaviors among thermoelectric A Mg 2 Sb 2 materials ( A = Ca, Sr, Sm, Yb, and Mg)

Contrary to the similar thermoelectric performance among both AZn 2 Sb 2 and AMg 2 Bi 2 compounds, their isostructural counterparts, AMg 2 Sb 2 , can exhibit thermoelectric figure of merit values that vary by orders of magnitude with different A elements. Here, we reveal physical origins accounting for the significantly differing performance among AMg 2 Sb 2 -based compounds (A = Ca, Sr, Sm, Yb, and Mg) through comprehensive analyses, where it is shown that the dispar- ities in performance at the macroscale essentially originate from the widely varying activation energies that equal amounts of dopant can induce. Meanwhile, a few unusual transport behaviors regarding electrical conductivity, carrier concentration, or lattice thermal con- ductivity among these compounds have been identified, and we also present their rationales in depth. Furthermore, this mechanism-focused study can not only promote further understanding of the complex transport behaviors in condensed matter but be instrumental in rationally tun- ing the physical properties of materials as well.

36 MATERIALS SCIENCE↗

Skeletal response to corticosteroid deficiency and excess in growing male rats

The study was designed to investigate bone histomorphometric changes induced by corticosteroid deficiency and supplementation at different dose levels in the rat skeleton. Male rats were adrenalectomized (ADX) or sham-operated and divided into six groups. At 2 days after surgery, sham-operated control rats (CON + PLA) and one group of ADX rats (ADX + PLA) were implanted subcutaneously (s.c.) with placebo pellets. ADX rats in the remaining four groups (ADX + C25, ADX + C50, ADX + C100, and ADX + C300) were implanted sc with corticosterone pellets designed to release 25, 50, 100, or 300 mg of the hormone over a 60 day period. Each ADX rat was also implanted sc with an aldosterone pellet (2.5 mg) similarly designed to release its contents over the same time period. All rats were killed at 3 weeks after implantation of pellets. Terminal blood samples were collected for serum biochemistry and the proximal tibial metaphyses (PTM), tibial diaphyses, and first lumbar vertebrae (LV) were processed undecalcified for quantitative bone histomorphometry. A dose-dependent increase in serum corticosterone concentration was observed in ADX rats implanted with hormone pellets. In comparison to CON + PLA rats, ADX + PLA rats had lower cancellous bone volume associated with a stimulation in longitudinal bone growth, an increase in mineral apposition rate, and a trend for increased osteoclast and osteoblast surfaces in PTM. In contrast, cancellous bone of ADX + C25 rats was preserved at nearly the CON + PLA level. However, the higher doses of corticosterone increased cancellous bone mass, but decreased longitudinal bone growth and all indices of bone resorption and formation in a dose-dependent manner in PTM. Similar cancellous bone changes were observed in the LV of corticosterone-treated rats, with the exception of a lack of an hormonal effect on cancellous bone mass. In the tibial diaphysis, corticosterone inhibited periosteal bone formation in a dose-dependent manner, but did not affect cortical bone mass. The results indicate that corticosteroid deficiency induces cancellous osteopenia, whereas supplementation with a near physiologic dose of the hormone prevents this bone loss in ADX rats. Furthermore, corticosteroid excess inhibits bone growth and bone turnover in a dose-dependent manner, but does not induce cancellous osteopenia in growing male rats.

Non-NASA Center↗

Approximate Inverse Chain Preconditioner: Iteration Count Case Study for Spectral Support Solvers

As the growing availability of computational power slows, there has been an increasing reliance on algorithmic advances. However, faster algorithms alone will not necessarily bridge the gap in allowing computational scientists to study problems at the edge of scientific discovery in the next several decades. Often, it is necessary to simplify or precondition solvers to accelerate the study of large systems of linear equations commonly seen in a number of scientific fields. Preconditioning a problem to increase efficiency is often seen as the best approach; yet, preconditioners which are fast, smart, and efficient do not always exist. Following the progress of [1], we present a new preconditioner for symmetric diagonally dominant (SDD) systems of linear equations. These systems are common in certain PDEs, network science, and supervised learning among others. Based on spectral support graph theory, this new preconditioner builds off of the work of [2], computing and applying a V-cycle chain of approximate inverse matrices. This preconditioner approach is both algebraic in nature as well as hierarchically-constrained depending on the condition number of the system to be solved. Due to its generation of an Approximate Inverse Chain of matrices, we refer to this as the AIC preconditioner. We further accelerate the AIC preconditioner by utilizing precomputations to simplify setup and multiplications in the con-text of an iterative Krylov-subspace solver. While these iterative solvers can greatly reduce solution time, the number of iterations can grow large quickly in the absence of good preconditioners. Initial results for the AIC preconditioner have shown a very large reduction in iteration counts for SDD systems as compared to standard preconditioners such as Incomplete Cholesky (ICC) and Multigrid (MG). We further show significant reduction in iteration counts against the more advanced Combinatorial Multigrid (CMG) preconditioner. We have further developed no-fill sparsification techniques to ensure that the computational cost of applying the AIC preconditioner does not grow prohibitively large as the depth of the V-cycle grows for systems with larger condition numbers. Our numerical results have shown that these sparsifiers maintain the sparsity structure of our system while also displaying significant reductions in iteration counts.1 2

97 MATHEMATICS AND COMPUTING↗

Approximate Inverse Chain Preconditioner: Iteration Count Case Study for Spectral Support Solvers

As the growing availability of computational power slows, there has been an increasing reliance on algorithmic advances. However, faster algorithms alone will not necessarily bridge the gap in allowing computational scientists to study problems at the edge of scientific discovery in the next several decades. Often, it is necessary to simplify or precondition solvers to accelerate the study of large systems of linear equations commonly seen in a number of scientific fields. Preconditioning a problem to increase efficiency is often seen as the best approach; yet, preconditioners which are fast, smart, and efficient do not always exist. Following the progress of [1], we present a new preconditioner for symmetric diagonally dominant (SDD) systems of linear equations. These systems are common in certain PDEs, network science, and supervised learning among others. Based on spectral support graph theory, this new preconditioner builds off of the work of [2], computing and applying a V-cycle chain of approximate inverse matrices. This preconditioner approach is both algebraic in nature as well as hierarchically-constrained depending on the condition number of the system to be solved. Due to its generation of an Approximate Inverse Chain of matrices, we refer to this as the AIC preconditioner. We further accelerate the AIC preconditioner by utilizing precomputations to simplify setup and multiplications in the con-text of an iterative Krylov-subspace solver. While these iterative solvers can greatly reduce solution time, the number of iterations can grow large quickly in the absence of good preconditioners. Initial results for the AIC preconditioner have shown a very large reduction in iteration counts for SDD systems as compared to standard preconditioners such as Incomplete Cholesky (ICC) and Multigrid (MG). We further show significant reduction in iteration counts against the more advanced Combinatorial Multigrid (CMG) preconditioner. We have further developed no-fill sparsification techniques to ensure that the computational cost of applying the AIC preconditioner does not grow prohibitively large as the depth of the V-cycle grows for systems with larger condition numbers. Our numerical results have shown that these sparsifiers maintain the sparsity structure of our system while also displaying significant reductions in iteration counts.1 2

97 MATHEMATICS AND COMPUTING↗

First-results from the Perseverance SHERLOC Investigation: Aqueous Alteration Processes and Implications for Organic Geochemistry in Jezero Crater, Mars

The Perseverance rover landed in Jezero crater, a site selected to fulfill the Mars-2020 mission goals of characterizing the geology of habitable environments and searching for signs of life while collecting samples for return to Earth [1]. Jezero hosted an open-basin lake during the late Noachian/early Hesperian (~3.7 Ga) [1-2], has units associated with the largest carbonate deposit identified on Mars [3-4], and has a well-preserved delta with clay and carbonate-bearing sediments, well-suited to preservation of organics [1,3-4]. Investigating the nature of organics and aqueous environments within their geologic con-text allows us to understand important aqueous processes and determine habitability within Jezero crater. Previous in situ landed measurements of organics could not resolve their spatial and mineralogical con-text [5-6]. Although Martian meteorites lack geological context, the spatial distribution of organic compounds in Martian meteorites have allowed recognition of an association between aqueous processes and organics [7-8]. Here, we show for the first time in-situ associations between carbonate-forming ultramafic alteration process, later stage aqueous sulfate and perchlorate formation, and organics on the Martian surface. Methodology and geological context: We use the Perseverance rover’s SHERLOC instrument (Scanning Habitable Environments with Raman and Lumines-ence of Organics and Chemicals), a deep-ultraviolet fluorescence and Raman scattering spectrometer capable of mapping the organic and mineral composition with a spatial resolution of 100 μm resolution to report the presence of organics and aqueously formed minerals at Jezero crater [9]. These spectral detections were compared with co-located images obtained with the autofocus context imager (ACI) and the WATSON camera for textural analysis [9]. As of writing, the Per-severance rover has abraded five targets that were measured with the SHERLOC instrument. The five targets are located in two different orbitally-identified geological units within the floor of Jezero crater; the Crater Floor Fractured Rough unit (CF-Fr) and the Séítah region within the Crater Floor Fractured 1 unit (CF-F1) [10]. In orbital infrared spectroscopic data, the CF-Fr unit is associated with pyroxene spectral signatures and minor alteration, while the Séítah region is associated with olivine and minor Mg-rich carbonates and clays [3-4,10]. Carbonation of ultramafic protolith recorded within Jezero crater: All scans of abraded targets within the Séítah region reveal strong peaks at 1080–1090 cm−1 consistent with carbonate and peak singlets or doublets at 820–840 cm−1 attributed to olivine (Fig. 1), consistent with orbital infrared observations. Our detailed micron-scale petrographic and spectroscopic evidence shows that these carbonates formed through carbonation of an ultramafic protolith. The supporting observations include: (1) Carbonate cation compositions match those of olivine, suggesting mixed Fe- and Mg-olivine gave rise to mixed Fe- and Mg-carbonates, similar to observations of ultramafic systems on Earth and within Martian meteorites [3-4,7-8]. (2) The ob-served carbonates co-occur with hydrated materials, gypsum, and potentially aqueously-formed phases, amorphous silicates and phosphate. (3) The spectral and textural variation of olivine and carbonate dominated zones and olivine-carbonate mixtures within both primary grains and interstitial zones are expected for carbonated ultramafic protoliths. (4) These mineral associations and textures closely resemble those observed within the ALH84001 and Nakhlite meteorites attributed to olivine carbonation on Mars [6-7]. Taken together, micron-scale SHERLOC documentation of these phenomena bridge previous orbital and meteorite observations and demonstrate in-situ regionally extensive (~106 km2) ultramafic alteration resulting in geo-logical deposition of carbonates. Furthermore, we observe that olivine carbonation was involved in preserving and possibly synthesizing organics, which makes this environment potentially habitable, as previously suggested in [1,3-4] (Fig. 1). Late-stage aqueous perchlorate and sulfate in Jezero crater: An abrasion target within the CF-Fr unit contains combinations of high intensity 950-955 cm−1 peaks and minor 1090-1095 cm−1 and 1150-1155 cm−1 peaks that are spectral fits to anhydrous perchlorate (Fig. 1). Some spectra show a combination of 950-955 cm−1 peaks with equally strong 1010-1020 cm−1 peaks, low intensity broad features at 1120 cm−1, and occasional broad 3450 cm−1 hydration (-OH) features, indicating a mixture of Ca-sulfate and perchlorate that is minimally hydrated (Fig. 1). The detections of per-chlorates within Jezero crater differ from previous measurements (e.g. Phoenix lander, Curiosity rover, Tissint meteorite [7,11]) because they are observed to be intimately related to aqueous processes including sulfate formation, they present as a secondary white void-fill occurring within the interior of the rock, and they are found to likely be Na-perchlorate. implications for their formation: Three different types of organics embedded within three different lithologies were observed within the abraded targets. Organics associated with low intensity ~340 nm fluorescence were widespread within targets with no apparent association to particular minerals (Fig. 1). Organics associated with ~305 nm and ~275 nm fluorescence correlated with sulfates within the Bellegarde target in the CF-Fr unit, while organics associated with high intensity ~340 nm fluorescence correlated with carbonate, phosphate, and amorphous silicate mixtures within the Garde target in the Séítah region (Fig. 1). Although assignment of fluorescence signatures to specific organic compounds is not conclusive, ~340 nm fluorescence is generally more consistent with 2-ring aromatic organics, ~275 nm fluorescence is more consistent with 1-ring aromatic organics, and ~305 nm fluorescence can be created by either 2- or 1-ring aromatics [12]. These observations indicate that the strongest fluorescence signatures interpreted as organics were found in materials associated with aqueous processes, i.e. sulfate- and carbonate-bearing materials, suggesting both brines and ultramafic carbonation aqueous environments were capable of preserving organics on ancient Mars. In Martian meteorites, simple aromatic organics proposed to have been synthesized through aqueous processes can be found within minerals associated with olivine carbonation and in spatial association with perchlorate and sulfate materials [7-8], similar to SHERLOC observations. Hence, we advance an abiotic aqueous synthesis origin for the organics although we cannot rule out the presence of organics from meteoritic in-fall or putative organic biosignatures. Detailed analyses will be required upon return of these materials to Earth.

E L Scheller↗