Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Materials Mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Concepts and techniques for ultrasonic evaluation of material mechanical properties

The ultrasonic nondestructive evaluation techniques discussed in the present paper indicate potentials for material characterization and property prediction. Stress wave interaction and material transfer function concepts are examined as a basis for explaining correlations between material mechanical behavior and ultrasonically measured quantities. It is observed that the effect and criticality of any discrete flaw, such as crack, inclusion, or any other stress raiser, is definable only in terms of its material microstructural environment. This underscores the importance of ultrasonic techniques capable of characterizing the stress wave energy transfer properties of a material.

Vary, A.↗
NASA NTRS1980

Concepts and techniques for ultrasonic evaluation of material mechanical properties

Ultrasonic methods that can be used for material strength are reviewed. Emergency technology involving advanced ultrasonic techniques and associated measurements is described. It is shown that ultrasonic NDE is particularly useful in this area because it involves mechanical elastic waves that are strongly modulated by morphological factors that govern mechanical strength and also dynamic failure modes. These aspects of ultrasonic NDE are described in conjunction with advanced approaches and theoretical concepts for signal acquisition and analysis for materials characterization. It is emphasized that the technology is in its infancy and that much effort is still required before the techniques and concepts can be transferred from laboratory to field conditions.

Vary, A.↗
NASA NTRS1986

Testing techniques for mechanical characterization of rapidly solidified materials

Mechanical property testing techniques are reviewed for rapidly solidified materials. Mechanical testing of rapidly solidified materials is complicated by the fact that in most cases at least one dimension of the material is very small (less than 100 microns). For some geometries, i.e., powder or thin surface layers, microhardness is the only feasible mechanical test. The ribbon geometry which is obtained by the melt-spinning method, however, has been used for a variety of mechanical property measurements including elastic properties, tensile properties, fracture toughness, creep, and fatigue. These techniques are described with emphasis placed on the precautions required by the restricted geometry of rapidly solidified specimens.

Koch, C. C.↗
NASA NTRS1977

Mechanical processess affecting differentiation of protolunar material

Mechanisms prior to lunar formation are sought to account for the loss of volatiles, the depletion of iron, and the enrichment of plagioclase. Some of the same mechanisms are necessary to account for achondritic, stony-iron, and iron meteorites. Collisions seem marginally capable of providing the heat to accomplish the differentiation into iron, magnesian silicates, and plagioclase. Once this differentiation is accomplished, the subsequent mechanical history should have been sufficient to sort material according to composition in the protolunar circumterrestrial cloud. Effects operating include the correlation of body size with mechanical strength; the lesser ability of the cloud to trap the larger, denser infalling bodies; the more rapid drawing into the Earth of the larger moonlets; and the higher energy orbits for dominantly plagioclase smaller pieces broken off by collision.

Kaula, W. M.↗
NASA NTRS1987

Mechanics of materials model

The Mechanics of Materials Model (MOMM) is a three-dimensional inelastic structural analysis code for use as an early design stage tool for hot section components. MOMM is a stiffness method finite element code that uses a network of beams to characterize component behavior. The MOMM contains three material models to account for inelastic material behavior. These include the simplified material model, which assumes a bilinear stress-strain response; the state-of-the-art model, which utilizes the classical elastic-plastic-creep strain decomposition; and Walker's viscoplastic model, which accounts for the interaction between creep and plasticity that occurs under cyclic loading conditions.

Meister, Jeffrey P.↗
NASA NTRS1982

Oxide dispersion hardened mechanically alloyed materials for high temperatures

The procedure of mechanical alloying makes it possible to obtain, with the aid of powder-metallurgy techniques, alloys that consist of a metallic matrix in which very fine oxide particles are dispersed. Mechanically alloyed compound powders can be used for making either forged or hot-rolled semifinished products. For these products, dispersion strengthening and precipitation hardening has been combined. At high temperatures, the strength characteristics of the alloy are determined by both dispersion hardening and by precipitation hardening processes. The effect produced by each process is independent of that due to the other. Attention is given to the principle of mechanical alloying developed by Benjamin (1970, 1976), the strength characteristics of mechanically alloyed materials, the corrosion resistance of mechanically alloyed material at high temperatures, and the preparation and characteristics of the alloy MA 6000 E.

Benjamin, J. S.↗
DOE OSTI2026

Critical Review of Brazil Disk Techniques for Tensile Strength Characterization With an Emphasis on High Explosive Materials

Mechanical properties are a critical performance metric for many high explosive (HE) materials and tensile strength properties are particularly important. Direct tensile measurements using dogbone shaped samples are the gold standard but they have the disadvantage that they are fairly large and require samples machined from billets. Diametral compression, more commonly known as Brazil disk (BD) testing, is an indirect method for measuring tensile strength on smaller and more easily fabricated samples. A review of the BD literature is presented with an emphasis on tensile strength measurements in high explosive materials. BD literature is reviewed in three primary areas: (i) rocks and concrete, (ii) pharmaceutical materials, and (iii) high explosive materials. The literature for rocks/concrete is extensive and dates back over 80 years; despite this there is no consensus on the validity/accuracy of the BD technique or the optimal variant of the BD technique to employ. The pharmaceutical literature is the opposite, being limited in scope and quantity of studies. BD literature on high explosive materials falls in between, not as impressive as in the rocks/concrete community but more substantiative than in the pharmaceutical community. After the review of the literature practical parameters for HE BD testing and recommended future work is discussed.

Brazil disk↗
DOE OSTI2026

The effect of dogbone sample size in the tensile testing of TATB-based plastic‑bonded explosive materials

Mechanical properties are of interest for many plastic‑bonded explosive (PBX) materials with tensile properties being of particular interest. Direct tensile measurements using dogbone-shaped samples are considered the gold standard, but they are fairly large, making testing more costly and less desirable from a safety perspective. We investigated whether the measured tensile strength depends on the dogbone specimen size, which to our knowledge, has not been reported in the literature for PBX materials. Understanding this should inform the feasibility of employing smaller samples and how sample size should be considered when comparing PBX dogbone values in the literature. The TATB-based PBX dogbone sample size was varied by (a) scaling all dimensions proportionally and (b) varying only the length of the samples. It was observed that the measured tensile peak stress (strength) was a function of the sample size, and was more dependent on the diameter (cross-sectional area) than the length of the samples. Since peak stress is calculated as peak force normalized to the diameter of the sample, one might not expect an explicit diameter dependence for the peak stress. Therefore, these results suggest there may be an additional strengthening effect as the sample diameter is increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dataset of tensile properties for sub-sized specimens of nuclear structural materials

Mechanical testing with sub-sized specimens plays an important role in the nuclear industry, facilitating tests in confined experimental spaces with lower irradiation levels and accelerating the qualification of new materials. The reduced size of specimens results in different material behavior at the microscale, mesoscale, and macroscale, in comparison to standard-sized specimens, which is referred to as the “specimen size effect.” Although analytical models have been proposed to correlate the properties of sub-sized specimens to standard-sized specimens, these models lack broad applicability across different materials and testing conditions. The objective of this study is to create the first large public dataset of tensile properties for sub-sized specimens used in nuclear structural materials. We performed an extensive literature review of relevant publications and extracted over 1,000 tensile testing records comprising 55 columns including material type and composition, manufacturing information, irradiation conditions, specimen dimensions, and tensile properties. The dataset can serve as a valuable resource to investigate the specimen size effect and develop computational methods to correlate the tensile properties of sub-sized specimens.

36 MATERIALS SCIENCE↗