Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mars orbiter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Space environment considerations for perovskite solar cell operations: A review

Designing new technology for extraterrestrial applications certainly presents unique challenges. The environmental stressors perovskite-based photovoltaics must overcome will vary with the environment in which they are deployed. One must consider mission requirements when designing photovoltaic devices and packaging. Different space "theaters" can have dramatically different stressors needing consideration for designing panels for solar power generation. Here, in this article, we review the relevant space environmental conditions that must be considered when designing perovskite-based photovoltaic devices for implementation in space. We specifically consider thermal, radiation, gaseous, weather, and other phenomena most relevant to photovoltaic operation for specific theaters such as Low Earth Orbit, Geosynchronous Orbit, Lunar surface, Mars (orbit and surface), and interplanetary exploration pathways.

14 SOLAR ENERGY↗
DOE OSTI2024

Demonstrating autonomous controls on hardware test beds is a necessity for successful missions to Mars and beyond

NASA and the Department of Defense are planning for a mission to Mars in the 2030s–2040s using nuclear thermal propulsion (NTP). NTP uses a nuclear reactor to heat flowing hydrogen and create thrust. A serious concern for crewed and uncrewed missions to Mars is the loss of reactor control. The reactor startup and initial rocket impulse are initiated in cislunar or near-earth orbital regions; therefore, radio communications between ground control and the NTP engine should occur in real time. However, radio communications can take more than 20 min, depending on planet positions, to reach Mars orbiters from ground control. To address this delay, local autonomous controls are implemented onboard the NTP engine to ensure acceptable operation. However, autonomous controls have not been demonstrated or implemented in research or power reactor contexts because of safety and reliability concerns. To enable autonomous controls development, demonstration, and validation, Oak Ridge National Laboratory has created a nonnuclear hardware-in-the-loop test bed. Sensors throughout the test bed relay system status and hardware response to the user control algorithm, including measurements of temperature, flow, pressure of a loop, control drum position, and drum speed. This paper discusses the development of this facility and user accessibility.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Space radiation measurements during the Artemis I lunar mission

Space radiation is a notable hazard for long-duration human spaceflight. Associated risks include cancer, cataracts, degenerative diseases and tissue reactions from large, acute exposures. Space radiation originates from diverse sources, including galactic cosmic rays, trapped-particle (Van Allen) belts5 and solar-particle events. Previous radiation data are from the International Space Station and the Space Shuttle in low-Earth orbit protected by heavy shielding and Earth’s magnetic field and lightly shielded interplanetary robotic probes such as Mars Science Laboratory and Lunar Reconnaissance Orbiter. Limited data from the Apollo missions and ground measurements with substantial caveats are also available. Here we report radiation measurements from the heavily shielded Orion spacecraft on the uncrewed Artemis I lunar mission. At differing shielding locations inside the vehicle, a fourfold difference in dose rates was observed during proton-belt passes that are similar to large, reference solar-particle events. Interplanetary cosmic-ray dose equivalent rates in Orion were as much as 60% lower than previous observations. Furthermore, a change in orientation of the spacecraft during the proton-belt transit resulted in a reduction of radiation dose rates of around 50%. These measurements validate the Orion for future crewed exploration and inform future human spaceflight mission design.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Measurement of post-disruption runaway electron kinetic energy and pitch angle during final loss instability in DIII-D

Post-disruption runaway electron (RE) kinetic energy K and pitch angle sin$\vartheta$ are critical parameters for determining resulting first wall material damage during wall strikes, but are very challenging to measure experimentally. During the final loss instability, confined RE K and sin$\vartheta$ are reconstructed during center-post wall strikes for both high impurity (high-Z) and low impurity (low-Z) plasmas by combining soft x-ray, hard x-ray, synchrotron emission, and total radiated power measurements. Deconfined (wall impacting) RE sin$\vartheta$ is then reconstructed for these shots by using time-decay analysis of infra-red imaging. Additionally, deconfined RE K and sin$\vartheta$ are reconstructed for a low-Z downward loss shot by analyzing resulting damage to a sacrificial graphite dome limiter. The damage analysis uses multi-step modeling simulating plasma instability, RE loss orbits, energy deposition, and finally material expansion (MARS-F, KORC, GEANT-4, and finally COMSOL). Overall, mean kinetic energies are found to be in the range $\langle$$K$$\rangle$ $≈ 3-4$ MeV for confined REs. KORC simulations indicate that the final loss instability process does not change individual RE kinetic energy K. In conclusion, confined RE pitch angles are found to be fairly low initially pre-instability, $\langle$sin$\vartheta$$\rangle$ $≈ 0.1 – 0.2$, but appear to increase roughly 2x, to $\langle$sin$\vartheta$$\rangle$ $≈ 0.3 – 0.4$ for both confined and deconfined REs during instability onset in the low-Z case; this increase is not observed in the high-Z case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Modeling fast ion losses due to tearing and internal kink perturbations in MAST-U

Fast ion (FI) loss properties in the presence of tearing mode and internal kink perturbations are numerically investigated for discharges in the MAST-U spherical tokamak, utilizing the MARS-F magnetohydrodynamic stability code and the REORBIT test particle guiding-center orbit-following module. Here, tracing about 100 000 particle markers sampled from the equilibrium distribution of the neutral-beam injection induced FIs, it is found that about 10% out of the total strike the limiting surface (including the divertor surface) in MAST-U discharge 46943, assuming a maximum perturbation of 100 G inside the plasma (corresponding to ~6 G at the Mirnov probe location at the outboard mid-plane). Detailed particle tracing, assuming a uniform initial distribution in the 2D phase space (at given radial locations), reveals that initially counter-current FIs launched near the plasma edge are subject to significant prompt losses, while almost all initially co-current ions remain well confined at the assumed perturbation level. Most lost FIs strike the lower-half of the limiting surface. Finite gyro-radius effects prevent lost ions from striking the top-outer corner of the super-X divertor chamber. A scan of the perturbation level (based on discharge 45163) reveals, not surprisingly, an approximately linear scaling of the particle loss fraction (for counter-current FIs) with respect to the perturbation amplitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Detection of visible-wavelength aurora on Mars

Mars hosts various auroral processes despite the planet’s tenuous atmosphere and lack of a global magnetic field. To date, all aurora observations have been at ultraviolet wavelengths from orbit. We describe the discovery of green visible-wavelength aurora, originating from the atomic oxygen line at 557.7 nanometers, detected with the SuperCam and Mastcam-Z instruments on the Mars 2020 Perseverance rover. Near–real-time simulations of a Mars-directed coronal mass ejection (CME) provided sufficient lead-time to schedule an observation with the rover. The emission was observed 3 days after the CME eruption, suggesting that the aurora was induced by particles accelerated by the moving shock front. To our knowledge, detection of aurora from a planetary surface other than Earth has never been reported, nor has visible aurora been observed at Mars. This detection demonstrates that auroral forecasting at Mars is possible, and that during events with higher particle precipitation, or under less dusty atmospheric conditions, aurorae will be visible to future astronauts.

Science & Technology - Other Topics↗
DOE OSTI2026

Toroidal phase of post-disruption runaway electron loss to wall in presence of applied 3-D fields in DIII-D

The toroidal distribution of runaway electrons (REs) striking the centre post in DIII-D post-disruption RE final loss events is simulated utilizing the MARS-F code combined with the REORBIT module, by tracing the guiding-centre drift orbits of test REs in the presence of external (applied) plus internal (intrinsic instability) 3-D fields. To better recover the experimental results, three different equilibria with different safety factor profiles are adopted. Dominant resistive magnetohydrodynamic instabilities are found to be m/n=2/1, 3/2 and 1/1 modes (where m and n are the poloidal and toroidal mode numbers). Externally applied n=1 resonant magnetic perturbations (RMPs), with both even and odd parity configuration, are considered in each equilibrium. Locking of MHD instability to the applied RMPs is simulated by minimizing the total perturbed magnetic energy in the plasma. Here, the simulated toroidal locations, where most REs strike in the presence of an edge m/n= 2/1 instability and the n=1 RMPs in even parity, are found to agree well with experiments. Modeling also captures the measured n = 2 RE loss pattern on the wall for experiments where an edge m/n=3/2 instability is dominant instead of the m/n=2/1 mode. The key overall findings include (a) the measured global RE toroidal impact pattern in experiments can be explained by a locked resistive kink instability, (b) the toroidal phase of the locked mode is well predicted by minimizing the total perturbed magnetic energy, and (c) this edge locked mode determines the toroidal phase of the peak RE wall impact.

Bai, Xue [University of California San Diego, La J↗
DOE OSTI2025

Wave ripples formed in ancient, ice-free lakes in Gale crater, Mars

Symmetrical wave ripples identified with NASA’s Curiosity rover in ancient lake deposits at Gale crater provide a key paleoclimate constraint for early Mars: At the time of ripple formation, climate conditions must have supported ice-free liquid water on the surface of Mars. These features are the most definitive examples of wave ripples on another planet. The ripples occur in two stratigraphic intervals within the orbitally defined Layered Sulfate Unit: a thin but laterally extensive unit at the base of the Amapari member of the Mirador formation, and a sandstone lens within the Contigo member of the Mirador formation. In both locations, the ripples have an average wavelength of ~4.5 centimeters. Internal laminae and ripple morphology show an architecture common in wave-influenced environments where wind-generated surface gravity waves mobilize bottom sediment in oscillatory flows. Their presence suggests formation in a shallow-water (<2 meters) setting that was open to the atmosphere, which requires atmospheric conditions that allow stable surface water.

Science & Technology - Other Topics↗
DOE OSTI2024

Extensive Secondary Cratering From the InSight Sol 1034a Impact Event

Abstract Impact cratering is one of the fundamental processes throughout the history of the Solar System. The formation of new impact craters on planetary bodies has been observed with repeat images from orbiting satellites. However, the time gap between images is often large enough to preclude detailed analysis of smaller‐scale features such as secondary impact craters, which are often removed or buried over a short time period. Here we use a seismic event detected on Mars by the NASA InSight mission to investigate secondary cratering at a new impact crater. We strengthen the case that the seismic event that occurred on Sol 1034 (S1034a) is the result of a new impact cratering event. Using the exact timing of this event from InSight, we investigated the resulting new impact crater in orbital image data. The S1034a impact crater is approximately 9 m in diameter but is responsible for over 900 secondary impact events in the form of low albedo spots that are located at distances of up to almost 7 km from the primary crater. We suggest that the low albedo spots formed from relatively low energy ejecta, with individual ejecta block velocities less than 200 m s −1 . We estimate that the low albedo spots, the main evidence of secondary impact processes at this new impact event, fade within 200–300 days after formation.

Grindrod, P. M. [Natural History Museum London UK]↗
DOE OSTI2026

Constraining the Hydration of Clay Minerals and Abundances of Amorphous Phases in Gale Crater, Mars

Both water and organic matter are required for the development and persistence of life. Phyllosilicates (clay minerals) have high surface areas that easily sorb water and organic matter. The Curiosity rover has investigated several hundred meters of stratigraphy in Gale crater, including where clays were detected from orbit. Previous results have suggested that subsurface hydration is greatest in units with the most abundant clays, suggesting that these minerals may be hydrated. Organics have also been found throughout Gale crater. Smectites are the most common and abundant phyllosilicates in Gale crater samples and can expand and sorb water and organics in interlayer sites. The most common organic sorption processes on Earth typically involve water or hydroxyl, so hydrated phyllosilicates are good candidates for organic preservation. Using newly derived subsurface hydration results with previously published mineralogy and geochemistry, we derived modeled constraints on the abundances of hydrated amorphous phases, “excess” water, and “excess” cations. These “excess” phases are not accounted for by published crystalline phase abundances or by amorphous phases constrained here. We found correlations between smectites and both “excess” water and “excess” cation abundances, indicating that smectites in Gale crater are hydrated and that cation bridging could be a mechanism for sorption of organics. Our results also show the persistence of amorphous sulfates, opal-A, and volcanic or impact glass, which indicate low water-rock interactions. Increased abundances of sulfates and glass in stratigraphically higher samples may indicate lower water availability and environmental aridification during the time these units were being deposited.

58 GEOSCIENCES↗
DOE OSTI2026

Amapari Marker Band Metal‐Enrichments: Potential Mechanisms and Implications for Surface and Subsurface Water and Weathering in Gale Crater

NASA's Curiosity rover is exploring a 5 km tall sedimentary mound that is hypothesized to record the transition from a warm and wet (phyllosilicate-rich) to a cold and drier (sulfate-rich) Mars. Evidence of magnesium sulfate-bearing rock has shown that Curiosity has crossed through this phyllosilicate-sulfate transition. Recently, Curiosity arrived at the Amapari Marker Band, a darker, indurated unit that can be traced laterally for tens of kilometers in orbiter images. Here, Curiosity found evidence for a very broad lake, and bedforms interpreted as wave-ripple laminated sedimentary rock that likely was deposited in shallow water in the explored location, before becoming a deeper lake. These rocks are enriched in Fe, Mn, and Zn which has major implications for groundwater paleohydrology in Gale crater. Three formation hypotheses are considered: concretion formation during early diagenetic alteration of shallow lake sediments, laterization or leaching of the sediments, and addition of Fe, Mn, and Zn by a mildly acidic and reducing groundwater interacting with a redox and/or pH front in a stratified lake. The preferred interpretation of the metal enrichments within the Amapari Marker band sedimentary rocks is that they formed in a shallow water environment at a redox and/or pH front within the ripple unit, which drove precipitation and concentration of metals. If the enrichments are due to groundwater alteration, these processes could link subsurface and surface environments. Water and the presence of high amounts of redox sensitive elements and other metals are favorable indicators for habitability.

58 GEOSCIENCES↗
DOE OSTI2024

The Role and Lifetime of Dissociative Heterogeneous Processes in Improving Simulated Ozone on Mars

Abstract Ozone simulated in Mars Global Climate Models (MGCMs) is used to assess the underlying chemistry occurring in the atmosphere. Currently, ozone total column abundance (TCA) is under‐predicted in MGCMs by up to 120%, implying missing or inaccurate chemistry in models. Heterogeneous reactions of hydroxyl radicals (HO X ) have been offered as an explanation for some of this bias, because they cause ozone to increase at locations where it's currently under‐predicted. We use four simulations to compare modeled ozone TCA with observations from the UVIS spectrometer aboard the ExoMars Trace Gas Orbiter to improve the representation of heterogeneous processes and their impact on ozone. We use a gas‐phase only run, a dissociative scheme, an adsorbed HO X retention scheme, and a hybrid scheme that combines the dissociative mechanism with the retention of HO X on water ice. We find retention of HO X is dependent on water ice sublimation, and ozone abundance increases when water ice persists for longer periods (1–20 sols). Over time, the loss of HO X causes a depletion in H 2 O 2 concentration (HO X reservoir), and thus allows ozone concentration to increase. When adsorbed HO X are desorbed and dissociate into other by‐products, HO X are not immediately available to destroy ozone. This results in larger ozone concentrations than if desorbed HO X are released directly back into their gaseous states. When using the hybrid scheme, ozone TCA is increased up to 50% where the ozone deficit is greatest, demonstrating the best agreement with observations, and implying that HO X radicals are both retained when adsorbed and dissociate.

Brown, M. A. J.↗
DOE OSTI2024

Intense alteration on early Mars revealed by high-aluminum rocks at Jezero crater

The NASA Perseverance rover discovered light-toned float rocks scattered across the surface of Jezero crater that are particularly rich in alumina ( ~ 35 wt% Al 2 O 3 ) and depleted in other major elements (except silica). These unique float rocks have heterogeneous mineralogy ranging from kaolinite/halloysite-bearing in hydrated samples, to spinel-bearing in dehydrated samples also containing a dehydrated Al-rich phase. Here we describe SuperCam and Mastcam-Z observations of the float rocks, including the first in situ identification of kaolinite or halloysite on another planet, and dehydrated phases including spinel and apparent partially dehydroxylated kaolinite. The presence of spinel in these samples is likely detrital in origin, surviving kaolinitization, pointing to an ultramafic origin. However, the association of low hydration with increased Al 2 O 3 abundances suggests heating-induced dehydration which could have occurred during the lithification or impact excavation of these rocks. Given the orbital context of kaolinite-bearing megabreccia in the Jezero crater rim, we propose an origin for these rocks involving intense aqueous alteration of the parent material, followed by dehydration/lithification potentially through impact processes, and dispersion into Jezero crater through flood or impact-related processes.

58 GEOSCIENCES↗
DOE OSTI2024

Hole doping and electronic correlations in Cr substituted BaFe$_{2}$As$_{2}$

For a significant composition range, the suppression of the spin density wave transition temperature (T SDW ) in Cr- and Mn-substituted BaFe 2 As 2 (CrBFA and MnBFA, respectively) coincides as a function of Cr/Mn content, despite the distinct electronic effects of these substitutions. Additionally, for any Cr/Mn content superconductivity (SC) is absent and this topic is particularly less explored in the case of CrBFA. Here, in this work, we employ angle-resolved photoemission spectroscopy (ARPES) and combined density functional theory plus dynamical mean field theory (DFT+DMFT) to address the evolution of the Fermi surface (FS) and electronic correlations in CrBFA. Our findings reveal that incorporating Cr leads to an effective hole doping of the states near the FS, which is well described within the virtual crystal approximation (VCA). Moreover, analysis of the ARPES spectra of the bands with main d yz -orbital character reveals a fractional scaling of the imaginary part of self-energy as a function of the binding energy, a signature property of Hund's correlations. Our DFT+DMFT calculations support these experimental findings. We conclude that CrBFA is a correlated electron system for which the changes in the FS as a function of Cr are unrelated to the suppression of T SDW . In addition, we suggest that the absence of SC is primarily due to the competition between Cr local moments and the Fe-derived itinerant spin fluctuations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Interface magnetism and anomalous Hall effect in La 0.7 ⁢Sr 0.3⁢ Mn⁢O 3 /SrIr⁢O 3 bilayers

Epitaxial interfaces combining 3d and 5d transition metal oxides are a fertile playground to examine the interplay between topology and electron correlations. In this work, we explore magnetism and transport of bilayers combining ferromagnetic La 0.7⁢ Sr 0.3⁢ Mn⁢O 3 and the strong spin-orbit coupling material SrIr⁢O 3 . We have found an interfacial magnetic proximity effect driving an intrinsic contribution to the anomalous Hall effect of topological origin. The interfacial proximity interaction is enabled by the Mn-O-Ir bonding reconstruction and depends on layer sequence. While bilayers with the La 0.7⁢ Sr 0.3 ⁢Mn⁢O 3 on top featuring a robust Mn magnetism at the interface show the intrinsic AHE contribution, it is absent in bilayers with the inverted layer sequence (SrIr⁢O 3 layer on top) showing strongly suppressed magnetism at the interface. These results illustrate the leading role of interfacial atomic reconstructions on the interplay between topology and correlations at 3d/5d oxide interfaces. This finding may be of interest in future oxide topological spintronics and spin-orbitronics.

36 MATERIALS SCIENCE↗