Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Maine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Airflow Model Testing to Determine the Distribution of Hot Gas Flow and O/F Ratio Across the Space Shuttle Main Engine Main Injector Assembly

Engine 0209, the certification engine for the new Phase 2+ Hot Gas Manifold (HGM), showed severe deterioration of the Main Combustion Chamber (MCC) liner during hot fire tests. One theory on the cause of the damage held that uneven local distribution of the fuel rich hot gas flow through the main injector assembly was producing regions of high oxidizer/fuel (O/F) ratio near the wall of the MCC liner. Airflow testing was proposed to measure the local hot gas flow rates through individual injector elements. The airflow tests were conducted using full scale, geometrically correct models of both the current Phase 2 and the new Phase 2+ HGMs. Different main injector flow shield configurations were tested for each HGM to ascertain their effect on the pressure levels and distribution of hot gas flow. Instrumentation located on the primary faceplate of the main injector measured hot gas flow through selected injector elements. These data were combined with information from the current space shuttle main engine (SSME) power balances to produce maps of pressure, hot gas flow rate, and O/F ratio near the main injector primary plate. The O/F distributions were compared for the different injector and HGM configurations.

Mahorter, L.↗
NASA NTRS1986

Numerical analysis of the three-dimensional flow in the main injector assembly of the Space Shuttle Main Engine

The Main Injector Assembly of the Space Shuttle Main Engine supplies the propellants to the Main Combustion Chamber through a large number of vertical injector elements. The gas flow around these elements (LOX posts) is three-dimensional, turbulent and compressible. This paper presents the results of numerical modeling of the hot and cool sections of the Main Injector Assembly and shows that the shields on the outermost row of injector elements affect the flow and the pressure drop in the hot section significantly. It is suggested that appropriate experiments are undertaken to verify the predictions.

Mukerjee, T.↗
NASA NTRS1991

Investigations of ice formation in the Space Shuttle Main Engine 0209 main injector coolant cavity

Severe main combustion chamber wall and main injector baffle element deterioration occurred during tests of Space Shuttle Main Engine 0209. One of the possible causes considered is ice formation and blockage of coolant to these components, resulting from the mixing of leaking hot turbine exhaust gas (hydrogen rich steam) and hydrogen coolant in the injector coolant cavity. The plausibility of ice blockage is investigated through simple mixing calculations for hot gas and hydrogen, investigation of condensation and water droplet formation, calculation of the freezing times for droplets, and the prediction of ice layer thicknesses. It is concluded that condensation and droplet formation can occur, and small water droplets that form can freeze very quickly when in contact with the cold coolant cavity surfaces. Copnservative analysis predicts, however, that the maximum thickness of the ice layers formed is too small to result in significant blockage of the coolant flow.

Richards, D. R.↗
NASA NTRS1992

Design of a prototype Advanced Main Combustion Chamber for the Space Shuttle Main Engine

Development of a prototype advanced main combustion chamber is underway at NASA Marshall Space Flight Center. The Advanced Main Combustion Chamber (AMCC) project is being approached utilizing a 'concurrent engineering' concept where groups from materials, manufacturing, stress, quality, and design are involved from the initiation of the project. The AMCC design has been tailored to be compatible with the investment casting process. Jacket, inlet/outlet manifolds, inlet/outlet neck coolant flow splitters, support ribs, actuator lugs, and engine controller mounting bracket will all be a part of the one-piece AMCC casting. Casting of the AMCC in a one-piece configuration necessitated a method of forming a liner in its structural jacket. A method of vacuum plasma spraying the liner is being developed. In 1994, the AMCC will be hot-fired on the Technology Test Bed Space Shuttle Main Engine.

Lackey, J. D.↗
NASA NTRS1989

The cost of performance - A comparison of the space transportation main engine and the Space Shuttle main engine

This paper compares the cost of the Space Shuttle Main Engine (SSME) and the Space Transportation Main Engine (STME) proposed by the Advanced Launch System Program. A brief description of the SSME and STME engines is presented, followed by a comparison of these engines that illustrates the impact of focusing on acceptable performance at minimum cost (as for the STME) or on maximum performance (as for the SSME). Several examples of cost reduction methods are presented.

Barisa, B. B.↗
NASA NTRS1989

The ages of globular cluster stars - Effects of rotation on pre-main-sequence, main-sequence, and turnoff evolution

Evolutionary sequences for low-metallicity stars (Z ranging from 0.001 to 0.0001) to study the effects of internal stellar rotation on the evolutionary time scales in the pre-main sequence, the main sequence (MS), and around the MS turnoff. Although a substantial amount of angular momentum remains in the interior, rotation is only a minor perturbation on the structure and ages of globular cluster stars. Even models with large initial angular momenta have MS lifetimes that are within 1 percent of those of standard models of the same mass and composition. Therefore, rotation does not affect age estimates of globular clusters from isochrone fitting. Furthermore, the models suggest that because rotation is not likely to affect horizontal-branch (HB) morphology, it does not affect significantly age estimates from the Delta-V method. Nevertheless, the internal angular momentum in the models is consistent with observations of surface rotational velocities on the HB, which require the preservation of a large reservoir of internal angular momentum.

Deliyannis, Constantine P.↗
NASA NTRS1987

A multidomain and multidimensional numerical analysis of flow in fuelside preburner, high pressure turbine, hot gas manifold and main injector assembly of the Space Shuttle main engine

The Space Shuttle Main Engine (SSME) consists of a large number of critical components each serving a special purpose. Any design change in one of these components not only alters its performance but also the performance of the ones in the upstream and in the downstream. To evaluate the effects of such a design change on the flow fields and on SSME's overall performance a multidomain and multidimensional analytical procedure has been developed and applied here to the series of components on the fuel side of the SSME. The results obtained from the multidomain analysis and their comparison with the single-domain solution when the SSME is operating at Full Power Load indicates that the multidomain model shows greater realism. It is concluded that this modeling technique would assist the designer significantly to achieve still higher performance levels of the SSME.

Mukerjee, T.↗
NASA NTRS1989

The long-term behavior of the main peak of the dayside ionosphere of Venus during solar cycle 21 and its implications on the effect of the solar cycle upon the electron temperature in the main peak region

Results are presented on the long-term behavior of the main peak electron density in the Venus ionosphere during the solar cycle 21, based on 104 radio occultation measurements of the vertical electron density profile in the dayside ionosphere of Venus carried out aboard the Pioneer Venus Orbiter spacecraft (along with published data on 11 Venera 9-10 measurements). The equation representing the electron temperature at h = 140 km is presented. The results imply that the electron temperature at h = 140 km decreased by about 25 percent from solar maximum to solar minimum, compared to a decrease of 50-75 percent above 200 km found by Kliore and Mullen (1989).

Kliore, Arvydas J.↗
NASA NTRS1993

Dusty debris clouds around main sequence and post-main sequence stars

During the past decade, infrared observations by IRAS and from the ground have revealed that many stars are orbited by dusty debris disks. Somewhat more indirect arguments indicate that many of these systems also contain asteroids, comets, and/or planets, thereby suggesting that planetary systems may be quite common in the Milky Way. Dust clouds at the main sequence K5 star HD 98800 and the white dwarf Giclas 29-38 are particularly noteworthy and mysterious.

Zuckerman, B.↗
DOE OSTI2026

Evaluation of accuracy and resolution of the electron beam profile scanner at the Fermilab Main Injector

The objective of this work is to assess the accuracy of measurements made by the Electron Beam Profile Scanner (EBPS), which captures the trajectory of an electron beam with and without a proton beam present. The proton beam induces deflection in the electron beam, which is influenced by proton charges.For high-resolution images, the probe beam needs to be of high intensity, small diameter, and small divergence, evaluated using a YAG screen and an optical transition radiation (OTR) screen. Additionally, the point spread function (PSF) will be calculated to characterize the optical system's properties using ZEMAX software. The capabilities of the Hamamatsu Charge-Injection Device (CID) camera and Kimball Physics electron gun (e-gun) will be considered for accuracy.

Mwaniki, Matilda [IIT, Chicago; Fermilab]↗
NASA NTRS1993

Pre-main sequence stars in the Chamaeleon cloud and pre-main sequence stars in the Rho Ophiuchi cloud core

This grant funds two closely related studies of young stars under the ROSAT Guest Observer Program. A major paper on ROSAT discovery of X-ray emitting young stars in the Chamaeleon star forming cloud was published in the Astrophysical Journal. Two soft X-ray images of the Chamaeleon I star forming cloud obtained with the ROSAT Position Sensitive Proportional Counter are presented. Seventy reliable, and 19 possible additional, X-ray sources are found. Most are confirmed to be new weak T Tauri stars. A study of X-ray emitting stars in a deep ROSAT image of the rho Ophiuchi star forming cloud cores has been completed, and is being submitted for publication in the Astrophysical Journal. A list of X-ray sources, fluxes, signal-to-noise ratios and boresight-corrected positions has been compiled, and optical identification down to 22(exp m) are obtained. Of the 55 reliable ROSAT sources, virtually all are associated with embedded infrared-detected T Tauri stars. T Tauri X-rays may provide a crucial link in the photoionization self-regulation of star formation in the galaxy.

Feigelson, Eric D.↗
NASA NTRS1988

Research investigation of helicopter main rotor/tail rotor interaction noise

Acoustic measurements were obtained in a Langley 14 x 22 foot Subsonic Wind Tunnel to study the aeroacoustic interaction of 1/5th scale main rotor, tail rotor, and fuselage models. An extensive aeroacoustic data base was acquired for main rotor, tail rotor, fuselage aerodynamic interaction for moderate forward speed flight conditions. The details of the rotor models, experimental design and procedure, aerodynamic and acoustic data acquisition and reduction are presented. The model was initially operated in trim for selected fuselage angle of attack, main rotor tip-path-plane angle, and main rotor thrust combinations. The effects of repositioning the tail rotor in the main rotor wake and the corresponding tail rotor countertorque requirements were determined. Each rotor was subsequently tested in isolation at the thrust and angle of attack combinations for trim. The acoustic data indicated that the noise was primarily dominated by the main rotor, especially for moderate speed main rotor blade-vortex interaction conditions. The tail rotor noise increased when the main rotor was removed indicating that tail rotor inflow was improved with the main rotor present.

Fitzgerald, J.↗
NASA NTRS2009

Solid Rocket Booster Large Main and Drogue Parachute Reliability Analysis

The parachutes on the Space Transportation System (STS) Solid Rocket Booster (SRB) are the means for decelerating the SRB and allowing it to impact the water at a nominal vertical velocity of 75 feet per second. Each SRB has one pilot, one drogue, and three main parachutes. About four minutes after SRB separation, the SRB nose cap is jettisoned, deploying the pilot parachute. The pilot chute then deploys the drogue parachute. The drogue chute provides initial deceleration and proper SRB orientation prior to frustum separation. At frustum separation, the drogue pulls the frustum from the SRB and allows the main parachutes that are mounted in the frustum to unpack and inflate. These chutes are retrieved, inspected, cleaned, repaired as needed, and returned to the flight inventory and reused. Over the course of the Shuttle Program, several improvements have been introduced to the SRB main parachutes. A major change was the replacement of the small (115 ft. diameter) main parachutes with the larger (136 ft. diameter) main parachutes. Other modifications were made to the main parachutes, main parachute support structure, and SRB frustum to eliminate failure mechanisms, improve damage tolerance, and improve deployment and inflation characteristics. This reliability analysis is limited to the examination of the SRB Large Main Parachute (LMP) and drogue parachute failure history to assess the reliability of these chutes. From the inventory analysis, 68 Large Main Parachutes were used in 651 deployments, and 7 chute failures occurred in the 651 deployments. Logistic regression was used to analyze the LMP failure history, and it showed that reliability growth has occurred over the period of use resulting in a current chute reliability of R = .9983. This result was then used to determine the reliability of the 3 LMPs on the SRB, when all must function. There are 29 drogue parachutes that were used in 244 deployments, and no in-flight failures have occurred. Since there are no observed drogue chute failures, Jeffreys Prior was used to calculate a reliability of R =.998. Based on these results, it is concluded that the LMP and drogue parachutes on the Shuttle SRB are suited to their mission and changes made over their life have improved the reliability of the parachute.

Clifford, Courtenay B.↗
NASA NTRS1978

Exploratory wind-tunnel investigation of the effect of the main rotor wake on tail rotor noise

Approaches to minimizing the noise generated by the interaction of the tail rotor blades with the wake of the main rotor considered include repositioning of the tail rotor with respect to the main rotor, changes in the rotational direction of the tail rotor, and modification of the main rotor tip vortex. A variable geometry model was built which had the capability of varying tail rotor position relative to the main rotor as well as direction of tail rotor rotation. Acoustic data taken from the model in the Langley anechoic noise facility indicates interaction effects due to both main rotor shed vortex and the main rotor turbulence.

Pegg, R. J.↗
NASA NTRS1983

Effects of aerodynamic interaction between main and tail rotors on helicopter hover performance and noise

A model test was conducted to determine the effects of aerodynamic interaction between main rotor, tail rotor, and vertical fin on helicopter performance and noise in hover out of ground effect. The experimental data were obtained from hover tests performed with a .151 scale Model 222 main rotor, tail rotor and vertical fin. Of primary interest was the effect of location of the tail rotor with respect to the main rotor. Penalties on main rotor power due to interaction with the tail rotor ranged up to 3% depending upon tail rotor location and orientation. Penalties on tail rotor power due to fin blockage alone ranged up to 10% for pusher tail rotors and up to 50% for tractor tail rotors. The main rotor wake had only a second order effect on these tail rotor/fin interactions. Design charts are presented showing the penalties on main rotor power as a function of the relative location of the tail rotor.

Menger, R. P.↗
NASA NTRS2002

Psychoacoustic Testing of Modulated Blade Spacing for Main Rotors

Psychoacoustic testing of simulated helicopter main rotor noise is described, and the subjective results are presented. The objective of these tests was to evaluate the potential acoustic benefits of main rotors with modulated (uneven) blade spacing. Sound simulations were prepared for six main rotor configurations. A baseline 4-blade main rotor with regular blade spacing was based on the Bell Model 427 helicopter. A 5-blade main rotor with regular spacing was designed to approximate the performance of the 427, but at reduced tipspeed. Four modulated rotors - one with "optimum" spacing and three alternate configurations - were derived from the 5 bladed regular spacing rotor. The sounds were played to 2 subjects at a time, with care being taken in the speaker selection and placement to ensure that the sounds were identical for each subject. A total of 40 subjects participated. For each rotor configuration, the listeners were asked to evaluate the sounds in terms of noisiness. The test results indicate little to no "annoyance" benefit for the modulated blade spacing. In general, the subjects preferred the sound of the 5-blade regular spaced rotor over any of the modulated ones. A conclusion is that modulated blade spacing is not a promising design feature to reduce the annoyance for helicopter main rotors.

Edwards, Bryan↗