Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ML T&E”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A lithium-sulfur battery with a solution-mediated pathway operating under lean electrolyte conditions

Lithium-sulfur (Li-S) battery is one of the most promising candidates for the next generation energy storage systems. However, several barriers, including polysulfide shuttle effect, the slow solid-solid surface reaction pathway in the lower discharge plateau, and corrosion of Li anode still limit its practical applications, especially under the lean electrolyte condition required for high energy density applications. Here, we propose a solution-mediated sulfur reduction pathway to improve the capacity and reversibility of the sulfur cathode and suppress dendrite growth on the Li metal anode simultaneously. With this method, a high coulombic efficiency (99%) and stable cycle life over 100 cycles were achieved under application-relevant conditions (S loading: 6.2 mg cm-2; electrolyte to sulfur ratio: 3 mLE gs-1; sulfur weigh ratio: 72 wt%). This result is enabled by a specially designed Li2S4-rich electrolyte, in which Li2S is formed through a chemical disproportionation reaction instead of electrochemical routes. A diglyme solvent was used to obtain electrolytes with the optimum range of Li2S4 concentration. Operando X-ray absorption spectroscopy confirms the solution pathway in a practical Li-S cell. This solution pathway not only introduces a new electrolyte regime for practical Li-S batteries, but also provides a new perspective for bypassing the inefficient surface pathway for other electrochemical processes.

Wang, Hui↗
DOE OSTI2020

Fixed-point quantum circuits for quantum field theories

Renormalization group ideas and effective operators are introduced to efficiently prepare ground states of massive lattice field theories on digital quantum devices. This is accomplished with a systematic approximation through localized unitaries that removes an exponentially costly barrier in the spatial volume of the quantum simulation. With these methods, classically computed ground states in a spatial volume L, containing a few Compton wavelengths, can be used to determine operators for preparing the ground state toward the thermodynamic limit with a precision improving as e –mL on beyond-classical quantum registers. Here, due to the exponential spatial decay of correlations in massive theories and the double exponential suppression of digitization artifacts in the number of qubits representing the scalar field, the derived fixed-point quantum circuits are expected to be relevant for simulations of quantum field theories throughout the evolution from small-scale near-term quantum devices to large-scale fault-tolerant quantum computers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

ML-driven Strong Lens Discoveries: Down to θ E ~ $0^{_{''}}_{^.}03$ and M halo < 10 11 M ⊙

We present results on extending the strong lens discovery space down to much smaller Einstein radii ( θ E ≲ $0^{_{''}}_{^.}03$) and much lower halo mass (M halo < 10 11 M ⊙ ) through the combination of JWST observations and machine learning (ML) techniques. First, we forecast detectable strong lenses with JWST using CosmoDC2 as the lens catalog, and a source catalog down to 29th magnitude. By further incorporating the VELA hydrodynamical simulations of high-redshift galaxies, we simulate strong lenses. We train a ResNet on these images, achieving near-100% completeness and purity for “conventional” strong lenses ( θ E ≳ $0^{_{''}}_{^.}05$), applicable to JWST, the Hubble Space Telescope (HST), the Roman Space Telescope, and Euclid VIS. For the first time, we also search for very low halo mass strong lenses (M halo < 10 11 M ⊙ ) in simulations, with θ E << $0^{_{''}}_{^.}05$, down to the best resolution ($0^{_{''}}_{^.}03$) and depth (10,000 s) limits of JWST using ResNet. A U-Net model is employed to pinpoint these small lenses in images, which are otherwise virtually impossible for human detection. Our results indicate that JWST can find ∼17/deg 2 such low-halo-mass lenses, with the locations of ∼1.1/deg 2 of these detectable by the U-Net at ∼100% precision (and ∼7.0/deg 2 at a 99.0% precision). To validate our model for finding “conventional” strong lenses, we apply it to HST images, discovering two new strong lens candidates previously missed by human classifiers in a crowdsourcing project (E. O. Garvin et al. 2022). This study demonstrates the (potentially “superhuman”) advantages of ML combined with current and future space telescopes for detecting conventional, and especially, low-halo-mass strong lenses, which are critical for testing cold dark matter models.

Silver, Ethan [Harvard University, Cambridge, MA (↗
DOE OSTI2026

Development of an ab initio learned model of electron deposition range in deuterium-tritium plasmas through time-dependent density functional theory calculations and machine learning

Accurate hydrodynamic modeling for laser-direct-drive (LDD) inertial-confinement-fusion (ICF) relies on precise calculations of the electron thermal conduction in all target materials. The nonlocal stopping range of electrons in ICF plasmas directly influences thermal conduction; yet, no first principles model exists for the electron mean free path in the conduction-zone regime. This work utilized time-dependent stochastic density-functional theory (TD-sDFT) to calculate the electron stopping power in deuterium-tritium (DT) plasmas at (ρ, T) conditions relevant to the conduction zone and the compressed shell in ICF. Using a combination of our TD-sDFT data and already established analytical models, we developed and trained an artificial neural network to create a global model for the nonlocal electron deposition range, λ E . We compared our machine-learning (ML) based model for λ E to the currently-used modified-Lee-More model in LDD radiation-hydrodynamic codes, such as lilac, and saw an overall decrease in the deposition range. To understand the effects of λ E on LDD ICF implosion dynamics, we implemented the ML-based model into lilac; specifically, we looked at designs consistent with a current experiment on the OMEGA laser and for a newly designed LDD-ICF target for the future OMEGA-Next facility. In both cases, we saw an overall drop in predicted ablation pressure, peak areal density, and neutron yield due to the reduced thermal conduction (smaller λ E ) in DT plasmas. Comparisons with the experiment on OMEGA are also made.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Evaluating Deception Detection Model Robustness To Linguistic Variation

With the increasing use of automated, machine learning-driven tools and the downstream impact that algorithmic judgements can have, it is critical to develop models that are robust to evolving or manipulated inputs. Evaluating the reliability of multimodal models across linguistic variations to understand model susceptibility to intentional linguistic adversarial attacks as well as natural linguistic variations is essential in this pursuit. We present extensive analysis of model robustness and susceptibility to linguistic variations in the setting of deceptive news detection, a difficult classification task that is an increasingly important problem to solve with the impact of misinformation spread online. We evaluate the effectiveness of incorporating adversarial defense strategies and measure model susceptibility to state-of-the-art adversarial attacks using two types of linguistic attacks — character and word perturbations. We consider two multiclass prediction tasks — a 3-way classification of tweets as trustworthy, propaganda, or disinformation; and a 4-way classification as clickbait, hoax, satire, or conspiracy — and compare the performance of three embeddings that have been state-of-the-art for several NLP tasks — GloVe, ELMo, and BERT — to highlight consistent trends in susceptibility, high confidence misclassifications, and high impact failures. We find that character or mixed ensemble models are the most effective defense mechanisms and that character perturbations are a more effective attack than word perturbations for deception classification.

adversarial evaluation↗
DOE OSTI2022

Quaternized chitosan as a biopolymer sanitizer for leafy vegetables: synthesis, characteristics, and traditional vs. dry nano-aerosol applications

A series of quaternary dimethyl-(alkyl)-ammonium chitosan derivatives (QACs) was synthesized and studied for physicochemical properties and bioactivity. The QACs tended to spontaneously self-assembly into nanoaggregates. Antimicrobial activity was examined in vitro on Gram-negative Escherichia coli (E. coli) and Gram-positive Listeria innocua (L. innocua) bacteria as well as phytopathogenic fungus Botrytis cinerea. The hexyl chain-substituted QAC-6 demonstrated the highest potency causing 3.0- and 4.5-log CFU mL-1 reduction of E. coli and L. innocua, respectively. QAC-6 was tested for antimicrobial activity on stainless steel coupons and fresh spinach leaves. A traditional ‘wet’ application (spray) and dry Engineered Water Nanostructure (EWNS) approach were used for spinach decontamination. With both approaches, significant reduction of microbial load on the treated produce was achieved. Finally, the wet application showed a greater reduction of microbial load, while the advantages of EWNS were reaching the antimicrobial effect with miniscule dose of active agent leaving treated surface visibly dry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Characterization of Infrequent Samples from the Concentration, Storage, and Transfer Facility: F-Area Pump Pit 3 (FPP-3) Sump Sample: December 2021 Sample

In December 2021, SRR-E sent an ~185 mL sample identified as FPP-3 from a F-Area pump pit sump to SRNL for analysis. The sample was pale yellow in color and contained a small amount of suspended solids visually estimated to be less than 1% by volume. SRNL analysis indicated that the sample contained 4.4 E+05 dpm/mL Cs-137, 6.2 E+05 dpm/mL total beta activity, 9.3 E+02 dpm/mL beta activity following cesium removal, and below detectable levels of alpha activity following cesium removal. In addition, the sample contained 0.015 M free OH- and 947 μg total organic carbon/mL.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Information-Theoretic Bounds on Quantum Advantage in Machine Learning

We study the performance of classical and quantum machine learning (ML) models in predicting outcomes of physical experiments. The experiments depend on an input parameter x and involve execution of a (possibly unknown) quantum process E. Our figure of merit is the number of runs of E required to achieve a desired prediction performance. We consider classical ML models that perform a measurement and record the classical outcome after each run of E, and quantum ML models that can access E coherently to acquire quantum data; the classical or quantum data are then used to predict the outcomes of future experiments. We prove that for any input distribution D(x), a classical ML model can provide accurate predictions on average by accessing E a number of times comparable to the optimal quantum ML model. In contrast, for achieving an accurate prediction on all inputs, we prove that the exponential quantum advantage is possible. For example, to predict the expectations of all Pauli observables in an n-qubit system ρ, classical ML models require 2 Ω(n) copies of ρ, but we present a quantum ML model using only O(n) copies. Our results clarify where the quantum advantage is possible and highlight the potential for classical ML models to address challenging quantum problems in physics and chemistry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Accurate Prediction of Voltage of Battery Electrode Materials Using Attention-Based Graph Neural Networks

Performing first-principles calculations to discover electrodes’ properties in the large chemical space is a challenging task. While machine learning (ML) has been applied to effectively accelerate those discoveries, most of the applied methods ignore the materials’ spatial information and only use predefined features: based only on chemical compositions. Here, we propose two attention-based graph convolutional neural network techniques to learn the average voltage of electrodes. Our proposed methods, which combine both atomic composition and atomic coordinates in 3D-space, improve the accuracy in voltage prediction significantly when compared to composition-based ML models. The first model directly learns the chemical reaction of electrodes and metal ions to predict their average voltage, whereas the second model combines electrodes’ ML predicted formation energy (E form ) to compute their average voltage. Our E form -based model demonstrates improved accuracy in transferability from our subset of learned Li ions to Na ions. Moreover, we predicted the theoretical voltage of 10 Na x MPO 4 F (M = Ti, Cr, Fe, Cu, Mn, Co, and Ni) fluorophosphate battery frameworks, which are unavailable in the Material Project database. It could be shown that we can expect average voltages higher than 3.1 V from those Na battery frameworks except from the NaTiPO 4 F and TiPO 4 F pair of electrodes, which offer an average voltage of 1.32 V.

25 ENERGY STORAGE↗
DOE OSTI2021

Leveraging Community and Author Context to Explain the Performance and Bias of Text-Based Deception Detection Models

Deceptive news posts shared in online communities can be detected with NLP models, and much recent research has focused on the development of such models. In this work, we use characteristics of online communities and authors --- the context of how and where content is posted --- to explain the performance of a neural network deception detection model and identify sub-populations who are disproportionately affected by model accuracy or failure. We examine who is posting the content, and where the content is posted to. We find that while author characteristics are better predictors of deceptive content than community characteristics, both characteristics are strongly correlated with model performance. Traditional performance metrics such as F1 score may fail to capture poor model performance on isolated sub-populations such as specific authors, and as such, more nuanced evaluation of deception detection models is critical.

machine learning (ML), machine learning explanatio↗
DOE OSTI2021

Characterization of Infrequent Samples from the Concentration, Storage, and Transfer Facility: H-Area Diversion Box 7 (HDB-7) Sump Sample: December 2021 Sample

In December 2021, SRR-E sent an ~250 mL sample identified as HDB-7 from an H-Area diversion box sump to SRNL for analysis. The sample was clear and colorless and free from any solids. SRNL analysis indicated that the sample contained 2.97E+05 dpm/mL Cs-137, 3.74E+05 dpm/mL total beta activity, 1.04E+03 dpm/mL beta activity following cesium removal, and below detectable levels of alpha activity and alpha activity following cesium removal. In addition, the pH of the sample was 7.32, free hydroxide concentration was 2.09E-07 M, and the density was 0.991 g/mL.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

A Machine Learning Framework for Predicting Microphysical Properties of Ice Crystals From Cloud Particle Imagery

The microphysical properties of ice crystals are important because they significantly alter the radiative properties and spatiotemporal distributions of clouds, which in turn strongly affect Earth's climate. However, it is challenging to measure key properties of ice crystals, such as mass or morphological features. Here, we present a proof-of-concept framework for predicting three-dimensional (3D) microphysical properties of ice crystals from in situ two-dimensional (2D) imagery. First, we computationally generated synthetic ice crystals using 3D modeling software along with geometric parameters estimated from the 2021 Ice Cryo-Encapsulation Balloon (ICEBall) field campaign. Then, we used synthetic crystals to train machine learning (ML) models to predict effective density ($ρ_e$), effective surface area ($A_e$), and number of bullets ($N_b$) from synthetic rosette imagery. On unseen synthetic images, our ML models accurately predicted ice crystal properties. ResNet-18 performed best, achieving $R^2$ values of 0.99 and 0.98 for $ρ_e$ and $A_e$, respectively, and MAE of 0.10 for mathematical equation in single view tasks. Stereo view ResNet-18 further reduced RMSE by 40% for $ρ_e$ and $A_e$ and reduced MAE by 0.08 for $N_b$. This work provides a novel ML-driven framework for estimating ice microphysical properties from in situ imagery, which will allow for downstream constraints on microphysical parameterizations, such as the mass-size relationship.

Ko, J. [Columbia Univ., New York, NY (United State↗
DOE OSTI2022

Preliminary Results for Using Uncertainty and Out-of-distribution Detection to Identify Unreliable Predictions.

As machine learning (ML) models are deployed into an ever-diversifying set of application spaces, ranging from self-driving cars to cybersecurity to climate modeling, the need to carefully evaluate model credibility becomes increasingly important. Uncertainty quantification (UQ) provides important information about the ability of a learned model to make sound predictions, often with respect to individual test cases. However, most UQ methods for ML are themselves data-driven and therefore susceptible to the same knowledge gaps as the models themselves. Specifically, UQ helps to identify points near decision boundaries where the models fit the data poorly, yet predictions can score as certain for points that are under-represented by the training data and thus out-of-distribution (OOD). One method for evaluating the quality of both ML models and their associated uncertainty estimates is out-of-distribution detection (OODD). We combine OODD with UQ to provide insights into the reliability of the individual predictions made by an ML model.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Machine learning aided line intensity ratio method for helium–hydrogen mixed recombining plasmas

The helium line intensity ratio (LIR) with the help of a collisional radiative (CR) model has long been used to measure the electron density, n e , and temperature, T e , and its potential and limitations for fusion applications have been discussed. However, it has been reported that the CR model approach leads to deviations in helium–hydrogen mixed plasmas and/or recombining plasmas. In this study, a machine learning (ML) aided LIR method is used to measure n e and T e from spectroscopic data of helium–hydrogen mixed recombining plasmas in the divertor simulator Magnum-PSI. To analyze mixed plasmas, which have more complex spectral shapes, the spectroscopy data were used directly for training instead of separating the intensities of each line. Finally, it is shown that the ML approach can provide a robust and simpler analysis method to deduce n e and T e from the visible emissions in helium–hydrogen mixed plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Machine learning-aided line intensity ratio technique applied to deuterium plasmas

It has been demonstrated that the electron density, n e , and temperature, T e , are successfully evaluated from He I line intensity ratios coupled with machine learning (ML). In this paper, the ML-aided line intensity ratio technique is applied to deuterium (D) plasmas with 0.031 < n e (10 18 m –3 ) < 0.67 and 2.3 < T e (eV) < 5.1 in the PISCES-A linear plasma device. Two line intensity ratios, D α /D γ and D α /D β , are used to develop a predictive model for n e and T e separately. Reasonable agreement of both ne and Te with those from single Langmuir probe measurements is obtained at n e > 0.1 × 10 18 m –3 . Addition of the D 2 /D α intensity ratio, where the D 2 band emission intensity is integrated in a wavelength range of λ ~ 557.4–643.0 nm, is found to improve the prediction of, in particular, n e , and T e . It is also confirmed that the technique works for D plasmas with 0.067 < n e (10 18 m –3 ) < 6.1 and 0.8 < T e (eV) < 15 in another linear plasma device, PISCES-RF. The two training datasets from PISCES-A and PISCES-RF are combined, and unified predictive models for n e and T e give reasonable agreement with probe measurements in both devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

A Diazo Linker Ligand Promotes Flexibility and Induced Fit Binding in a Microporous Copper Coordination Network

Abstract Flexible organic linkers represent an intuitive and effective strategy to design flexible metal–organic materials. We report herein a systematic study concerning the effect of varying the central bond of mixed pyridyl‐benzoate linkers, L, upon the flexibility of three isostructuralkddtopology microporous coordination networks (CNs) of formula ML 2 :X‐kdd‐1‐Cu,1= L = (E)‐4‐(pyridin‐4‐yldiazenyl)benzoate;X‐kdd‐2‐Cu,2= L = (E)‐4‐(2‐(pyridin‐4‐yl)vinyl)benzoate; the previously reportedX‐kdd‐3‐Cu,3= L = 4‐(pyridin‐4‐ylethynyl)benzoate. As revealed by single crystal x‐ray diffraction (SCXRD) and gas sorption studies,X‐kdd‐1‐Cu, exhibited gate‐opening during CO 2 and hydrocarbon (C2 and C8) sorption experiments whereas the other two CNs did not. Insight into these phase transformations was gained from in situ variable‐pressure and variable temperature powder X‐ray diffraction (PXRD), SCXRD, and modeling. Rotation of ligand1around the diazo bond, torsion angle changes between phenyl and carboxylate moieties, and deformation of the Cu‐based rod building blocks enabled activatedX‐kdd‐1‐Cuto form new phases with C8 isomers and CH 2 Cl 2 , CH 2 Cl 2 inducing contraction of the activated phase. Computational studies suggest that1enables flexibility thanks to its lower barrier of deformation versus2or3. This study teaches that diazo moieties could offer a general strategy to enhance the flexibility of CNs.

Chemistry↗
DOE OSTI2026

Data-Driven Discovery and Experimental Validation of Solvent Polarity Effects on Conjugated Polymer Solution-to-Film Assembly Pathways

Understanding how solvent properties influence the solution-to-film assembly of conjugated polymers remains a critical challenge due to the complex and intertwined nature of polymer–solvent interactions. In this study, we integrate a data-driven framework with experimental validation to identify key parameters influencing the assembly and performance of poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)] (DPP-DTT) in organic field-effect transistors (OFETs). A machine learning (ML) approach identified the normalized Reichardt polarity parameter (E T N ) as a significant descriptor correlated with DPP-DTT hole mobility (μ). Systematic DPP-DTT devices fabricated using solvents across a wide E T N range revealed that higher E T N solvents yield enhanced μ. To elucidate the structural origins of high μ, we conducted comprehensive analyses using UV–vis–NIR spectroscopy and grazing incidence wide angle X-ray scattering (GIWAXS) measurements. The results revealed that films processed from high E T N solvents exhibit reduced paracrystallinity. By analyzing the solution-state behavior using optical microscopy and solution WAXS, we revealed polymer solubility differences in the various solvents and associated distinct polymer assembly pathways, elucidating why the high E T N solvent produces long-range ordered films. Notably, the high E T N solvent shows a pronounced preference for liquid-crystal (LC)-mediated assembly, providing a mechanistic explanation for the enhanced structural order. Therefore, these results demonstrate that solvent polarity, as evaluated by E T N , serves as an important parameter that plays a significant role in the DPP-DTT assembly pathway and resultant solid-state morphology. This work provides a strategy for integrating data science with experiments to identify critical parameters associated with complex polymer systems and helps guide rational process design for high-performance organic electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeled sensitivity of multi-MA accelerator performance to electrode contaminant inventory

Significant particle-in-cell code development has enabled simulations of power flow in multi-MA accelerators to include the desorption of surface contaminants, their ionization into surface plasmas, and the impact of these plasmas on efficiency. The simulations base desorption on an Arrhenius equation, whose most significant unknown is the surface contaminant inventory. The sensitivity of power-flow simulations to this inventory is studied here using Sandia National Laboratories' Z accelerator with a 7-nH MagLIF load [Phys. Plasmas 17, 056303 (2010)]. Simulations are conducted in 3D cylindrical coordinates for the current-adder, or “convolute,” region of Z and in 2D for the final feed only. Simulated contaminant inventories are varied from 1 to 32 monolayers (MLs) in 2D, and 2 to 4 ML in 3D. The results reveal sensitivities to the local ratio of E/B⁠. The high B-field, low E-field region near the short-circuit load is insensitive to the contaminant inventory, where assumed values of 4–32 ML change the load current by ≤ 2%, and agree with experiment to within 2% at peak current. A 1-ML value is the outlier, increasing the load current by 5%, but still within measurement uncertainty. In contrast, the relatively higher E-field, lower B-field convolute region has slower contaminant desorption and higher-magnitude E-field penetration of the surface plasmas. The current loss in the convolute region does increase with contaminant inventory. The loss assuming 4 ML is 12% larger than for 2 ML, with 4 ML being the better match to experiment.

Arrhenius equation↗