Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METALLICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Metal–Carbodithioate-Based 3D Semiconducting Metal–Organic Framework: Porous Optoelectronic Material for Energy Conversion

Solar energy conversion requires the working compositions to generate photoinduced charges with high potential and the ability to deliver charges to the catalytic sites and/or external electrode. These two properties are typically at odds with each other and call for new molecular materials with sufficient conjugation to improve charge conductivity but not as much conjugation as to overly compromise the optical band gap. In this work, we developed a semiconducting metal-organic framework (MOF) prepared explicitly through metal-carbodithioate"(-CS 2 ) n M" linkage chemistry, entailing augmented metal-linker electronic communication. The stronger ligand field and higher covalent character of metal-carbodithioate linkages-when combined with spirofluorene-derived organic struts and nickel-(II) ion-based nodes-provided a stable, semiconducting 3D-porous MOF, Spiro-CS 2 Ni. This MOF lacks long-range ordering and is defined by a flexible structure with non-aggregated building units, as suggested by reverse Monte Carlo simulations of the pair distribution function obtained from total scattering experiments. The solvent-removed "closed pore"material recorded a Brunauer-Emmett-Teller area of similar to 400m 2 /g, where the "open pore" form possesses90 wt % solvent-accessible porosity. Electrochemical measurements suggest that Spiro-CS 2 Ni possesses a band gap of 1.57 eV(sigma = 10 -7 S/cm at -1.3 V bias potential),which can be further improved by manipulating the d-electron configuration through an axial coordination (ligand/substrate), the latter of which indicates usefulness as an electrocatalyst and/or a photoelectrocatalyst(upon substrate binding). Transient-absorption spectroscopy reveals a long-lived photo-generated charge-transfer state (τ CR = 6.5 mu s) capable of chemical transformation under a biased voltage. Spiro-CS 2 Ni can endure a compelling range of pH(1-12 for weeks) and hours of electrochemical and photoelectrochemical conditions in the presence of water and organic acids. We believe this work provides crucial design principles for low-density, porous,light-energy-conversion materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Transparent, High‐Charge Capacity Metal Mesh Electrode for Reversible Metal Electrodeposition Dynamic Windows with Dark‐State Transmission <0.1%

Abstract Dynamic windows allow user control over light and heat flow to save energy and maximize comfort. Reversible metal electrodeposition (RME) dynamic windows can uniquely tint to a color‐neutral privacy state (0.1% visible light transmission). The design parameters of transparent metal mesh counter electrodes for high‐contrast RME dynamic windows: high transparency, charge capacity and surface area with low haze, sheet resistance and cost are discussed, concluding that woven metal meshes meet these design parameters. Electroplated current is measured on an indium tin oxide electrode and two meshes with different wire spacings, showing the meshes’ cylindrical geometry enable them to draw more current per square area. The mesh material composition is analyzed to ensure cycling durability in a CuBi electrolyte by developing a transparent mesh with an inert core (stainless steel, SS), a thin Au coating, and a high charge‐capacity (1.5 C cm −2 ) CuBi outer coating. The study demonstrates that the films maintain a consistent Cu:Bi ratio and optical properties after 250 privacy cycles or 1500 cycles to 10% transmission, showing that the Cu and Bi coating is effective in keeping the films from becoming Cu rich with cycling. Finally, a 100 cm 2 device with excellent uniformity and color neutrality is demonstrated.

Yeang, Andrew L.↗
DOE OSTI2021

Single-crystalline epitaxial TiO film: A metal and superconductor, similar to Ti metal

Titanium monoxide (TiO), an important member of the rock salt 3d transition-metal monoxides, has not been studied in the stoichiometric single-crystal form. It has been challenging to prepare stoichiometric TiO due to the highly reactive Ti 2+ . We adapt a closely lattice-matched MgO(001) substrate and report the successful growth of single-crystalline TiO(001) film using molecular beam epitaxy. This enables a first-time study of stoichiometric TiO thin films, showing that TiO is metal but in proximity to Mott insulating state. We observe a transition to the superconducting phase below 0.5 K close to that of Ti metal. Density functional theory (DFT) and a DFT-based tight-binding model demonstrate the extreme importance of direct Ti–Ti bonding in TiO, suggesting that similar superconductivity exists in TiO and Ti metal. Our work introduces the new concept that TiO behaves more similar to its metal counterpart, distinguishing it from other 3d transition-metal monoxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Tailoring the Surface of Metal Halide Perovskites to Enable the Atomic Layer Deposition of Metal Oxide Contacts

Replacing organic contact layers with inorganic counterparts, such as metal oxides, is one strategy for improving long-term device stability in metal halide perovskite solar cells. Often, the methods used to deposit metal oxide thin films are incompatible with metal halide perovskites, creating challenges for the fabrication of contacts above the perovskite absorber layer. In this study, we utilize a one-step, solution treatment of the top surface of Cs 0.25 FA 0.75 Pb(Br 0.20 I 0.80 ) 3 to create a thin (~1 nm) overlayer of lead sulfide (PbS) to protect the underlying perovskite during subsequent deposition. X-ray characterization of the surface region shows that the PbS overlayer limits undesirable changes to the perovskite structure and stoichiometry during atomic layer deposition (ALD) of SnO 2 . This protection enables ALD growth of SnO 2 electron contacts on top of the perovskite without an organic transport layer (e.g., C 60 ), resulting in a solar cell with a power conversion efficiency of 5.8%. This result is a marked improvement over devices with ALD SnO 2 grown directly on the perovskite without a PbS overlayer, which produce no power output. Furthermore, the interface characterization and device results in this study highlight some of the key challenges associated with ALD metal oxide growth on perovskite materials and can help inform the future design of inorganic contact layer deposition in solar photovoltaic technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhanced CO 2 Methanation Activity of Sm 0.25 Ce 0.75 O 2-δ –Ni by Modulating the Chelating Agents-to-Metal Cation Ratio and Tuning Metal–Support Interactions

Highly active and selective CO 2 methanation catalysts are critical to CO 2 upgrading, synthetic natural gas production, and CO 2 emission reduction. Wet impregnation is widely used to synthesize oxide-supported metallic nanoparticles as the catalyst for CO 2 methanation. However, as the reagents cannot be homogeneously mixed at an atomic level, it is challenging to modulate the microstructure, crystal structure, chemical composition, and electronic structure of catalysts via wet impregnation. In this work, a scalable and straightforward catalyst fabrication approach has been designed and validated to produce Sm 0.25 Ce 0.75 O 2-δ -supported Ni (SDC–Ni) as the CO 2 methanation catalyst. By varying the chelating agents-to-total metal cations ratio (C/I ratio) during the catalyst synthesis, we can readily and simultaneously modulate the microstructure, metallic surface area, crystal structure, chemical composition, and electronic structure of SDC–Ni, consequently fine-tuning the oxide–support interactions and CO 2 methanation activity. The optimal C/I ratio (0.1) leads to an SDC–Ni catalyst that facilitates C–O bond cleavage and significantly improves CO 2 conversion at 250 °C. A CO 2 -to-CH 4 yield of >73% has been achieved at 250 °C. Furthermore, a stable operation of >1500 hours has been demonstrated, and no degradation is observed. Extensive characterizations were performed to fundamentally understand how to tune and enhance CO 2 methanation activity of SDC–Ni by modulating the C/I ratio. The correlation of physical, chemical, and catalytic properties of SDC–Ni with the C/I ratio is established and thoroughly elaborated in this work. This study could be applied to tune the oxide–support interactions of various catalysts for enhancing the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Influence of Rare-Earth Ion Radius on Metal–Metal Charge Transfer in Trinuclear Mixed-Valent Complexes

We report the synthesis and characterization of a highly conjugated bisferrocenyl pyrrolediimine ligand, Fc 2 PyrDIH (1), and its trinuclear complexes with rare earth ions—(Fc 2 PyrDI)M(N(TMS) 2 ) 2 (2-M, M = Sc, Y, Lu, La). Crystal structures, NMR spectra, and UV/Vis-NIR data are presented. The latter are in good agreement with DFT calculations, illuminating the impact of the rare earth ionic radius on NIR charge transfer excitations. For [2-Sc] + , the charge transfer is at 11500 cm -1 , while for [2-Y] + only a d-d transition at 8000 cm -1 is observed. Lu has an ionic radius in between Sc and Y, and the [2-Lu] + complex exhibits both transitions. From TDDFT analysis we assign the 11500 cm -1 transition as a mixture of MLCT and MMCT, rather than pure metal-to-metal CT, because it has significant ligand character. Typically, the ferrocenes have high rotational freedom in bis-ferrocenyl mixed valent complexes. However, in the present (Fc 2 PyrDI)M(N(TMS) 2 ) 2 complexes, ligand-ligand repulsions lock the rotational freedom, so that rare earth ionic radius-dependent geometric differences increasingly influence orbital overlap as the ionic radius falls. The Marcus-Hush coupling constant HAB trends as: [2-Sc] + >[2-Lu] + >[2-Y] +

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

On the estimation of metal-metal distortions for metal-metal orbital electronic ionizations and excitations

Reference is made to the work of Lichtenberger and Blevins (1984), who resolved a nu(Mo2) vibronic structure in the metal-metal delta-orbital photoelectron ionization band of Mo2(O2CCH3) in the gas phase at 200 C and performed a Franck-Condon analysis of the observed band profile. In the analysis, 'hot bands' were explicitly excluded as having any important effect on the Franck-Condon results. In the analytical study reported in the present paper, it is demonstrated that the thermal effects are indeed significant.

Miskowski, Vincent M.↗
DOE OSTI2024

Metal coated articles comprising a refractory metal region and a platinum-group metal region, and related methods

A metal coated article includes a platinum-group metal region adjacent a refractory metal region, which is adjacent a substrate comprising an inorganic material. A refractory metal carbide layer is adjacent the substrate and the refractory metal layer is adjacent the refractory metal carbide layer. The platinum-group metal region comprises a refractory metal/platinum-group metal layer and a platinum-group metal layer. Related methods are also disclosed.

Tripathy, Prabhat K.↗
DOE OSTI2022

Metal-Coordinated Phthalocyanines as Platform Molecules for Understanding Isolated Metal Sites in the Electrochemical Reduction of CO 2

Single-atom catalysts (SACs) of non-precious transition metals (TMs) often show unique electrochemical performance, including the electrochemical carbon dioxide reduction reaction (CO 2 RR). However, the inhomogeneity in their structures makes it difficult to directly compare SACs of different TM for their CO 2 RR activity, selectivity, and reaction mechanisms. Here, the comparison of isolated TMs (Fe, Co, Ni, Cu, and Zn) is systematically investigated using a series of crystalline molecular catalysts, namely TM-coordinated phthalocyanines (TMPcs), to directly compare the intrinsic role of the TMs with identical local coordination environments on the CO 2 RR performance. The combined experimental measurements, in situ characterization, and density functional theory calculations of TM-Pc catalysts reveal a TM dependent CO 2 RR activity and selectivity, with the free energy difference of ΔG(*HOCO) - ΔG(*CO) being identified as a descriptor for predicting the CO 2 RR performance.

25 ENERGY STORAGE↗
DOE OSTI2022

Subgalactic Scaling Relations with T e -based Metallicities of Low-metallicity Regions in Galaxies: Metal-poor Gas Inflow May Have Important Effects?

The scaling relationship is a fundamental probe of the evolution of galaxies. Using the integral field spectroscopic data from the Mapping Nearby Galaxies at Apache Point Observatory survey, we select 1698 spaxels with a significant detection of the auroral emission line [O ιιι]λ4363 from 52 galaxies to investigate the scaling relationships at the low-metallicity end. We find that our sample’s star formation rate is higher and its metallicity is lower in the scaling relationship than the star-forming sequence after removing the contribution of the Fundamental Metallicity Relation. We also find that the stellar ages of our sample are younger (<1 Gyr) and the stellar metallicities are also lower. Morphological parameters from the Deep Learning catalog indicate that our galaxies are more likely to be mergers. These results suggest that their low-metallicity regions may be related to interaction; the inflow of metal-poor gas may dilute the interstellar medium and form new metal-poor stars in these galaxies during interactions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Supernova-driven Turbulent Metal Mixing in High-redshift Galactic Disks: Metallicity Fluctuations in the Interstellar Medium and its Imprints on Metal-poor Stars in the Milky Way

The extent to which turbulence mixes gas in the face of recurrent infusions of fresh metals by supernovae (SN) could help provide important constraints on the local star formation conditions. This includes predictions of the metallicity dispersion among metal-poor stars, which suggests that the interstellar medium was not very well mixed at these early times. The purpose of this Letter is to help isolate, via a series of numerical experiments, some of the key processes that regulate turbulent mixing of SN elements in galactic disks. We study the gas interactions in small simulated patches of a galaxy disk with the goal of resolving the small-scale mixing effects of metals at parsec scales, which enables us to measure the turbulent diffusion coefficient in various galaxy environments. By investigating the statistics of variations of α elements in these simulations, we are able to derive constraints not only on the allowed range of intrinsic yield variations in SN explosions but also on the star formation history of the Milky Way. We argue that the observed dispersion of [Mg/Fe] in metal-poor halo stars is compatible with the star-forming conditions expected in dwarf satellites or in an early low-star-forming Milky Way progenitor. In particular, metal variations in stars that have not been phase-mixed can be used to infer the star-forming conditions of disrupted dwarf satellites.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Liquid–Solid Mixtures of Ga Metal Infused with Cu Microparticles and Nanoparticles for Microscale and Nanoscale Patterning of Solid Metals at Room Temperature

This paper demonstrates and characterizes a simple ink for nanopatterning of solid metallic structures under ambient conditions by taking advantage of the low melting point of gallium and its affinity to form intermetallics with other metals. Bare copper micro- and nanoparticles readily mix with liquid gallium near room temperature to form a paste that ultimately amalgamates into a dense solid when mixed at the appropriate concentration ratios. The paste has sufficient shelf life that can be extruded from a nozzle at modest temperatures to form solid three-dimensional (3D) shapes. Additionally, the paste can be molded at room temperature to replicate feature sizes ranging from a few millimeters down to hundreds of nanometers. In situ X-ray diffraction (XRD) and thermo-mechanical analysis (TMA) data show gallium and copper readily interdiffuse to form the thermodynamically expected intermetallic phase. We describe the capabilities and limitations of a simple way to pattern solid metals in an additive fashion (syringe-based extrusion) and with high resolution (molding) at or near room temperature. Here, the use of a paste that solidifies provides a novel route for 3D printing of solid metals at ambient temperatures as well as the creation of micro- and nanostructured metallic surfaces that may be useful for optics, non-wetting surfaces, or electronic microcomponents.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Metal–Metal Oxide Catalytic Interface Formation and Structural Evolution: A Discovery of Strong Metal–Support Bonding, Ordered Intermetallics, and Single Atoms

In-depth investigation of metal–metal oxide interactions and their corresponding evolution is of paramount importance to heterogeneous catalysis as it allows the understanding and maneuvering of the structure of catalytic motifs. Herein, using a series of core/shell metal/iron oxide (M/FeO x , M = Pd, Pt, Au) nanoparticles and through a combination of in situ and ex situ electron and X-ray investigations, we revealed anomalous and dissimilar M–FeO x interactions among different systems under reducing conditions. Further, Pd interacts strongly with FeO x after high-temperature reductive treatment, featured by the formation of Pd single atoms in the FeO x matrix and increased Pd–Fe bonding, while Pt transforms into ordered PtFe intermetallics and Pt single atoms immediately upon the coating of FeO x . In contrast, Au does not manifest strong bonding with FeO x . As a proof of concept of tailoring metal–metal oxide interactions for catalysis, optimized Pd/FeO x demonstrates 100% conversion and 86.5% selectivity at 60 °C for acetylene semihydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Methods of producing metal sulfides, metal selenides, and metal sulfides/selenides having controlled architectures using kinetic control

The present invention is directed to methods of preparing metal sulfide, metal selenide, or metal sulfide/selenide nanoparticles and the products derived therefrom. In various embodiments, the nanoparticles are derived from the reaction between precursor metal salts and certain sulfur- and/or selenium-containing precursors each independently having a structure of Formula (I), (II), or (III), or an isomer, salt, or tautomer thereof, where Q1, Q2, Q3, R1, R2, R3, R5, and X are defined within the specification.

36 MATERIALS SCIENCE↗