Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METAL-NONMETAL BATTERIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Effect of entropy of lithium intercalation in cathodes and anodes on Li-ion battery thermal management

The entropy changes (ΔS) in various cathode and anode materials, as well as complete Li-ion batteries, were measured using an electrochemical thermodynamic measurement system (ETMS). LiCoO 2 has a much larger entropy change than electrodes based on LiNi x Co y Mn z O 2 and LiFePO 4 , while lithium titanate based anode has lower entropy change compared to graphite anodes. Reversible heat generation rate was found to be a significant portion of the total heat generation rate. The appropriate combinations of cathode and anode were investigated to minimize reversible heat.

25 ENERGY STORAGE↗

Properties of Lithium Phosphorus Oxynitride (Lipon) for 3D Solid-State Lithium Batteries

Abstract The thin film electrolyte known as Lipon has proven successful for planar thin film battery applications. Here the sputter deposition of the amorphous lithium phosphorous oxynitride electrolyte onto more complex 3D structures is examined. The 3D structures include off-axis alignment of planar substrates and also 10-100 m arrays of pores, columns and grooves. For magnetron sputtering in N2 gas at 2.6 Pa, the Lipon film deposition is not restricted by the line-of-sight to the target, but forms conformal and dense films over the 3D and off-axis substrates. The deposition rate decreases for areas and grooves that are less accessible for the sputtered flux. The composition varies, but remains within the range that gives sufficient Li+ ionic conductivity, 2 1 S/cm

25 ENERGY STORAGE↗

Investigation on the Charging Process of Li2O2-Based Air Electrodes in Li-O2 Batteries with Organic Carbonate Electrolytes

The charge processes of Li-O2 batteries were investigated by analyzing the gas evolution by in situ gas chromatography-mass spectroscopy (GC/MS) technique. The mixture of Li2O2/Fe3O4/Super P carbon/polyvinylidene fluoride (PVDF) was used as the starting air electrode material and 1M LiTFSI in carbonate-based solvents was used as electrolyte. It was found that Li2O2 is reactive to 1-methyl-2-pyrrolidinone and PVDF binder used in the electrode preparation. During the 1st charge (up to 4.6 V), O2 was the main component in the gases released. The amount of O2 measured by GC/MS was consistent with the amount of Li2O2 decomposed in the electrochemical process as measured by the charge capacity, indicative of the good chargeability of Li2O2. However, after the cell was discharged to 2.0 V in O2 atmosphere and re-charged to ~ 4.6 V in the second cycle, CO2 was dominant in the released gases. Further analysis of the discharged air electrode by X-ray diffraction and Fourier transform infrared spectroscopy indicated that lithium-containing carbonate species (lithium alkyl carbonate and/or Li2CO3) were the main reaction products. Therefore, compatible electrolyte and electrodes as well as the electrode preparation procedures need to be developed for long term operation of rechargeable Li-O2 or Li-air batteries.

25 ENERGY STORAGE↗

LiMnPO4 Nanoplate Grown via Solid-State Reaction in Molten Hydrocarbon for Li-ion Battery Cathode

Electrochemically active LiMnPO4 nanoplates have been synthesized via novel single step solid state reaction in molten hydrocarbon. The LiMnPO4 prepared show unique porous nanoplate shape ~50nm in thickness with highly preferred crystallographic orientation. The reversible cycling of carbon coated LiMnPO4 show flat potential at 4.1 V vs. Li with specific capacity reaching up to 168mAh/g and excellent cycling performance using only galvanostatic charging / discharging mode.

25 ENERGY STORAGE↗

Materials Processing for Lithium-Ion Batteries

Extensive efforts have been undertaken to develop and optimize new materials for lithium-ion batteries to address power and energy demands of mobile electronics and electric vehicles. However, the introduction of large-format lithium-ion batteries is hampered by high cost, safety concerns, and deficiencies in energy density and calendar life. Advanced materials-processing techniques can contribute solutions to such issues. From that perspective, this work summarizes the materials-processing techniques used to fabricate the cathodes, anodes, and separators used in lithium-ion batteries.

25 ENERGY STORAGE↗

Differential voltage analyses of high-power lithium-ion cells 4. Cells containing NMC.

Cells with and without a LiC{sub 2}O{sub 4}BF{sub 2} electrolyte additive and that contained Li{sub 1.05}(Mn{sub 1/3}Co{sub 1/3}Ni{sub 1/3}){sub 0.95}O{sub 2} (NMC) positive electrodes were tested for calendar and cycle life at 60% state of charge. The temperatures used in these tests were 25 and 45 C (cycle life) and 45 and 55 C (calendar life). An analysis of the C/25 capacity data shows that the C/25 capacity decreases with the square root of time. The additive slowed down the rate of capacity decline. The C/25 data were subjected to differential voltage analysis to determine the possible cause of the capacity decrease and at which electrode the capacity decrease was occurring. Data from full cells and half-cells were compared to elucidate individual electrode contributions. This analysis indicated that lithium-capacity-consuming side reactions were occurring primarily at the negative electrode.

25 ENERGY STORAGE↗

Investigation of the Rechargeability of Li-O2 Batteries in Non-aqueous Electrolyte

In order to understand the nature of the limited cycle life and poor energy efficiency associated with the secondary Li-O¬2 batteries the discharge products of primary Li-O2 cells at different depth of discharge (DOD) are systematically analyzed in this work. It is revealed that if discharged to 2.0 V a small amount of Li2O2 coexist with Li2CO3 and RO-(C=O)-OLi) in alkyl carbonate-based electrolyte. Further discharging the air electrodes to below 2.0 V the amount of Li2CO3 and LiRCO3 increases significantly due to the severe electrolyte decomposition. There is no Li2O detected in this alkyl carbonate electrolyte regardless of DOD. It is also found that the alkyl carbonate based electrolyte begins to decompose at 4.0 V during charging under the combined influences from the high surface area carbon, the nickel metal current collector and the oxygen atmosphere. Accordingly the impedance of the Li-O2 cell continues to increase after each discharge and recharge process indicating a repeated plating of insoluble lithium salts on the carbon surface. Therefore the whole carbon electrode becomes completely insulated only after a few cycles and loses the function of providing active tri-phase regions for the Li-oxygen batteries.

25 ENERGY STORAGE↗

Lithium borate cluster salts as novel redox shuttles for overcharge protection of lithium-ion cells.

Redox shuttle is a promising mechanism for intrinsic overcharge protection in lithium-ion cells and batteries. Two lithium borate cluster salts are reported to function as both the main salt for a nonaqueous electrolyte and the redox shuttle for overcharge protection. Lithium borate cluster salts with a tunable redox potential are promising candidates for overcharge protection for most positive electrodes in state-of-the-art lithium-ion cells.

25 ENERGY STORAGE↗

Effects of Nonaqueous Electrolytes on Primary Li-Air Batteries

The effects of nonaqueous electrolytes on the performance of primary Li-air batteries operated in dry air environment have been investigated. Organic solvents with low volatility and low moisture absorption are necessary to minimize the change of electrolyte compositions and the reaction between Li anode and water during the discharge process. The polarity of aprotic solvents outweighs the viscosity, ion conductivity and oxygen solubility on the performance of Li-air batteries once these latter properties attain certain reasonable level, because the solvent polarity significantly affects the number of tri-phase regions formed by oxygen, electrolyte, and active carbons (with catalyst) in the air electrode. The most feasible electrolyte formulation is the system of LiTFSI in PC/EC mixtures, whose performance is relatively insensitive to PC/EC ratio and salt concentration. The quantity of such electrolyte added to a Li-air cell has notably effects on the discharge performance of the Li-air battery as well, and a maximum in capacity is observed as a function of electrolyte amount. The coordination effect from the additives or co-solvents [tris(pentafluorophenyl)borane and crown ethers in this study] also greatly affects the discharge performance of a Li-air battery.

25 ENERGY STORAGE↗

NANOSTRUCTURED METAL OXIDES FOR ANODES OF LI-ION RECHARGEABLE BATTERIES

The aligned nanorods of Co{sub 3}O{sub 4} and nanoporous hollow spheres (NHS) of SnO{sub 2} and Mn{sub 2}O{sub 3} were investigated as the anodes for Li-ion rechargeable batteries. The Co{sub 3}O{sub 4} nanorods demonstrated 1433 mAh/g reversible capacity. The NHS of SnO{sub 2} and Mn{sub 2}O{sub 3} delivered 400 mAh/g and 250 mAh/g capacities respectively in multiple galvonastatic discharge-charge cycles. It was found that high capacity of NHS of metal oxides is sustainable attributed to their unique structure that maintains material integrity during cycling. The nanostructured metal oxides exhibit great potential as the new anode materials for Li-ion rechargeable batteries with high energy density, low cost and inherent safety.

25 ENERGY STORAGE↗

Cathodes - Technological review

Lithium cobalt oxide (LiCoO{sub 2}) was already used in the first commercialized Li-ion battery by SONY in 1990. Still, it is the most frequently used cathode material nowadays. However, LiCoO{sub 2} is intrinsically unstable in the charged state, especially at elevated temperatures and in the overcharged state causing volume changes and transport limitation for high power batteries. In this paper, some technological aspects with large impact on cell performance from the cathode material point of view will be reviewed. At first it will be focused on the degradation processes and life-time mechanisms of the cathode material LiCoO{sub 2}. Electrochemical and structural results on commercial Li-ion batteries recorded during the cycling will be discussed. Thereafter, advanced nanomaterials for new cathode materials will be presented.

25 ENERGY STORAGE↗

Facile synthesized nanorod structured vanadium pentoxide for high-rate lithium batteries

Nano-structured vanadium oxide (V2O5) is fabricated via facile thermal-decomposition of a vanadium precursor and vanadyl oxalate produced by reacting micro-sized V2O5 with oxalic acid. The V2O5 nanorods produced by this method exhibit much better electrochemical performance than commercial micro-sized V2O5. The optimized-nanorod electrodes with a high density of (001) planar defects give the best specific discharge capacities of 270 mAh g-1 at C/2 (147 mA g-1) coupled with good cycle stability with only 0.32% fading per cycle. Even at a high rate of 4C (1176 mA g-1), the nanorod electrode still delivers 198 mAh g-1. These results suggest that the nanostructured V2O5 is a good cathode for high-rate, lithium-ion battery applications.

25 ENERGY STORAGE↗

Enhancing the rate capability of high capacity xLi{sub 2}MnO{sub 3} {sm_bullet} (1-x)LiMO{sub 2} (M=Mn, Ni, Co) electrodes.

The rate capability of high capacity xLi{sub 2}MnO{sub 3} {center_dot} (1 - x)LiMO{sub 2} (M = Mn, Ni, Co) electrodes for lithium-ion batteries has been significantly enhanced by stabilizing the electrode surface by reaction with a Li-Ni-PO{sub 4} solution, followed by a heat-treatment step. Reversible capacities of 250 mAh/g at a C/11 rate, 225 mAh/g at C/2 and 200 mAh/g at C/1 have been obtained from 0.5Li{sub 2}MnO{sub 3} {center_dot} 0.5LiNi{sub 0.44}Co{sub 0.25}Mn{sub 0.31}O{sub 2} electrodes between 4.6 and 2.0 V. The data bode well for their implementation in batteries that meet the 40-mile range requirement for plug-in hybrid vehicles.

25 ENERGY STORAGE↗

Fused ring and linking groups effect on overcharge protection for lithium-ion batteries.

The derivatives of 1,3-benzodioxan (DBBD1) and 1,4-benzodioxan (DBBD2) bearing two tert-butyl groups have been synthesized as new redox shuttle additives for overcharge protection of lithium-ion batteries. Both compounds exhibit a reversible redox wave over 4 V vs Li/Li{sup +} with better solubility in a commercial electrolyte (1.2 M LiPF{sub 6}) dissolved in ethylene carbonate/ethyl methyl carbonate (EC/EMC 3/7) than the di-tert-butyl-substituted 1,4-dimethoxybenzene (DDB). The electrochemical stability of DBBD1 and DBBD2 was tested under charge/discharge cycles with 100% overcharge at each cycle in MCMB/LiFePO{sub 4} and Li{sub 4}Ti{sub 5}O{sub 12}/LiFePO{sub 4} cells. DBBD2 shows significantly better performance than DBBD1 for both cell chemistries. The structural difference and reaction energies for decomposition have been studied by density functional calculations.

25 ENERGY STORAGE↗

Nanostructured lithium nickel manganese oxides for lithium-ion batteries.

Nanostructured lithium nickel manganese oxides were investigated as advanced positive electrode materials for lithium-ion batteries designated to power plug-in hybrid electric vehicles and all-electric vehicles. The investigation included material characterization and electrochemical testing. In cell tests, the Li{sub 1.375}Ni{sub 0.25}Mn{sub 0.75}O{sub 2.4375} composition achieved high capacity (210 mAh g{sup -1}) at an elevated rate (230 mA g{sup -1}), which makes this material a promising candidate for high energy density Li-ion batteries, as does its being cobalt-free and uncoated. The material has spherical morphology with nanoprimary particles embedded in micrometer-sized secondary particles, possesses a multiphase character (spinel and layered), and exhibits a high packing density (over 2 g cm{sup -3}) that is essential for the design of high energy density positive electrodes. When combined with the Li{sub 4}Ti{sub 5}O{sub 12} stable anode, the cell showed a capacity of 225 mAh g{sup -1} at the C/3 rate (73 mA g{sup -1}) with no capacity fading for 200 cycles. Other chemical compositions, Li{sub (1+x)}Ni{sub 0.25}Mn{sub 0.75}O{sub (2.25+x/2)} (0.32 {le} x {le} 0.65), were also studied, and the relationships among their structural, morphological, and electrochemical properties are reported.

25 ENERGY STORAGE↗