Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MERCURY 191”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 191

The present revision of the nuclear structure properties for the nuclides belonging to the A = 191 mass chain contains many improvements, corrections and additions to the material presented in previous evaluations (1995Br38, Nucl. Data Sheets 74, 611 (1995)). Besides updating many values, and including supplementary data for already known levels, transitions and level schemes, the most noteworthy modifications with respect to the prior evaluation are the first significant level schemes for {sup 191}Pb, {sup 191}Bi, and {sup 191}Po, showing many levels and transitions, mostly derived from (HI,xn{gamma}) work. The first reports for {sup 191}At and {sup 191}W and the observation of linking transitions from superdeformed levels to normal deformed levels in {sup 191}Hg were also included. Most of decay data sets contain many discrepant data; in some cases, normalization is tentative.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Remediation of Mercury-Contaminated Storm Sewer Sediments from the West End Mercury Area at the Y-12 National Security Complex in Oak Ridge, Tennessee - 12061

The Y-12 National Security Complex in Oak Ridge, TN has faced an ongoing challenge from mercury entrapped in soils beneath and adjacent to buildings, storm sewers, and process pipelines. Previous actions to reduce the quantity and/or mobilization of mercury-contaminated media have included plugging of building floor drains, cleaning of sediment and sludge from sumps, manholes, drain lines, and storm sewers, lining/relining of storm sewers and replacement of a portion of the storm sewer trunk line, re-routing and removal of process piping, and installation of the Central Mercury Treatment System to capture and treat contaminated sump water. Despite the success of these actions, mercury flux in the storm sewer out-falls that discharge to Upper East Fork Poplar Creek (UEFPC) continues to pose a threat to long-term water quality. A video camera survey of the storm sewer network revealed several sections of storm sewer that had large cracks, separations, swells, and accumulations of sediment/sludge and debris. The selected remedy was to clean and line the sections of storm sewer pipe that were determined to be primary contributors to the mercury flux in the storm sewer out-falls. The project, referred to as the West End Mercury Area (WEMA) Storm Sewer Remediation Project, included cleaning sediment and debris from over 2,460 meters of storm sewer pipe followed by the installation of nearly 366 meters of cure-in-place pipe (CIPP) liner. One of the greatest challenges to the success of this project was the high cost of disposal associated with the mercury-contaminated sludge and wastewater generated from the storm sewer cleaning process. A contractor designed and operated an on-site wastewater pre-treatment system that successfully reduced mercury levels in 191 cubic meters of sludge to levels that allowed it to be disposed at Nevada Nuclear Security Site (NNSS) disposal cell as a non-hazardous, low-level waste. The system was also effective at pre-treating over 1,514,000 liters of wastewater to levels that met the waste acceptance criteria for the on-site West End [wastewater] Treatment Facility (WETF). This paper describes the storm sewer cleaning and lining process and the methods used to process the mercury-contaminated sludge and wastewater, as well as several 'lessons learned' that would be relevant to any future projects involving storm sewer cleaning and debris remediation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nuclear Data Sheets for A = 187

Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for {sup 187}Hf, {sup 187}Ta, {sup 187}W, {sup 187}Re, {sup 187}Os, {sup 187}Ir, {sup 187}Pt, {sup 187}Au, {sup 187}Hg, {sup 187}Tl, {sup 187}Pb, {sup 187}Bi, and {sup 187}Po. This evaluation for A = 187 supersedes the earlier one by R.B. Firestone (1991Fi02) published in Nuclear Data Sheets 62, 159 (1991) and the {sup 187}Tl evaluation by C.M. Baglin (1999Ba24) published in Nuclear Data Sheets 86, 487 (1999). Highlights of this publication are the following: This evaluation includes first identifications of {sup 187}Hf, {sup 187}Ta (1999Be63, 2000PoZY) and {sup 187}Po (2006An11) nuclides. A B(E2){up_arrow} = 0.080 12 was determined by 1967Bi10 for the 9/2+ state at 845 keV in {sup 187}Re Coulomb Excitation. Using this B(E2) value and the adopted 845{gamma} ray properties, a T{sub 1/2}=54 fs 34 can be deduced for the 845 keV level of {sup 187}Re. This T{sub 1/2} yields a large B(E2)(W.u.){approx}1.3x105 for the 263{gamma} (depopulating the same level) indicating either substantial unobserved feeding or incorrect g-ray branching intensities of this level. The decay of g.s. and isomer of {sup 187}Tl are poorly known (please see {sup 187}Tl {epsilon} decay (51 s+15.60 s)). Based on {sup 191}Po {alpha} decay studies, 2002An19 establishes a {sup 187}Pb isomeric level energy at 2(15) keV and assigns J{pi}=13/2+ for the {sup 187}Pb g.s. and J{pi}=3/2- for the isomeric state (inverse of the systematics of odd-mass Pb nuclei in this region). From {sup 187}Pb and {sup 187}Pb{sup m} mass measurements, 2005We11 determined the isomeric level energy at 33(13) keV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparative Sequence Analysis of Multidrug-Resistant IncA/C Plasmids from Salmonella enterica

Determinants of multidrug resistance (MDR) are often encoded on mobile elements, such as plasmids, transposons, and integrons, which have the potential to transfer among foodborne pathogens, as well as to other virulent pathogens, increasing the threats these traits pose to human and veterinary health. Our understanding of MDR among Salmonella has been limited by the lack of closed plasmid genomes for comparisons across resistance phenotypes, due to difficulties in effectively separating the DNA of these high-molecular weight, low-copy-number plasmids from chromosomal DNA. To resolve this problem, we demonstrate an efficient protocol for isolating, sequencing and closing IncA/C plasmids from Salmonella sp. using single molecule real-time sequencing on a Pacific Biosciences (Pacbio) RS II Sequencer. We obtained six Salmonella enterica isolates from poultry, representing six different serovars, each exhibiting the MDR-Ampc resistance profile. Salmonella plasmids were obtained using a modified mini preparation and transformed with Escherichia coli DH10Br. A Qiagen Large-Construct kitTM was used to recover highly concentrated and purified plasmid DNA that was sequenced using PacBio technology. These six closed IncA/C plasmids ranged in size from 104 to 191 kb and shared a stable, conserved backbone containing 98 core genes, with only six differences among those core genes. The plasmids encoded a number of antimicrobial resistance genes, including those for quaternary ammonium compounds and mercury. We then compared our six IncA/C plasmid sequences: first with 14 IncA/C plasmids derived from S. enterica available at the National Center for Biotechnology Information (NCBI), and then with an additional 38 IncA/C plasmids derived from different taxa. These comparisons allowed us to build an evolutionary picture of how antimicrobial resistance may be mediated by this common plasmid backbone. Our project provides detailed genetic information about resistance genes in plasmids, advances in plasmid sequencing, and phylogenetic analyses, and important insights about how MDR evolution occurs across diverse serotypes from different animal sources, particularly in agricultural settings where antimicrobial drug use practices vary.

59 BASIC BIOLOGICAL SCIENCES↗

Semiphenomenological approximation of the sums of experimental radiative strength functions for dipole gamma transitions of energy E{sub {gamma}}below the neutron binding energy B{sub n} for mass numbers in the range 40 {<=} A {<=} 200

The sums of radiative strength functions for primary dipole gamma transitions, k(E1) + k(M1), are approximated to a high precision by a superposition of two functional dependences in the energy range 0.5 < E{sub 1} < B{sub n} - 0.5 MeV for the {sup 40}K, {sup 60}Co, {sup 71,74}Ge, {sup 80}Br, {sup 114}Cd, {sup 118}Sn, {sup 124,125}Te, {sup 128}I, {sup 137,138,139}Ba, {sup 140}La, {sup 150}Sm, {sup 156,158}Gd, {sup 160}Tb, {sup 163,164,165}Dy, {sup 166}Ho, {sup 168}Er, {sup 170}Tm, {sup 174}Yb, {sup 176,177}Lu, {sup 181}Hf, {sup 182}Ta, {sup 183,184,185,187}W, {sup 188,190,191,193}Os, {sup 192}Ir, {sup 196}Pt, {sup 198}Au, and {sup 200}Hg nuclei. It is shown that, in any nuclei, radiative strength functions are a dynamical quantity and that the values of k(E1) + k(M1) for specific energies of gamma transitions and specific nuclei are determined by the structure of decaying and excited levels, at least up to the neutron binding energy B{sub n}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗