Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MCN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Observation of two elastic thresholds in Ge{sub x}As{sub y}Se{sub 1-x-y} glasses

We have prepared Ge{sub x}As{sub y}Se{sub 1-x-y} glasses with mean coordination numbers (MCNs) from 2.2 to 2.86. T{sub g} was found to generally increase with increasing MCN while the glass density showed a maximum at MCN{approx_equal}2.45 and a minimum at MCN{approx_equal}2.65. The elastic moduli of the glasses were estimated from the shear and compressional wave velocities measured by ultrasonic pulse interferometry. For the first time we simultaneously observed two elastic transition thresholds, the first at MCN{approx_equal}2.45 and the second at MCN{approx_equal}2.65, which appear closely correlated with changes in the glass microstructure. The elastic moduli of two groups of samples with the same MCN=2.4 and 2.64 but different compositions suggest that the chemical compositions also have an influence on the elastic properties.

36 MATERIALS SCIENCE↗

Raman spectra of Ge{sub x}As{sub y}Se{sub 1-x-y} glasses

Various Ge-As-Se glasses spanning a mean coordination number (MCN) from 2.2 to 2.94 have been investigated using differential scanning calorimetry and Raman spectroscopy. The glass transition temperature T{sub g} was found to increase with increasing MCN, except for those glasses located within the nanoscale phase-separated region of the phase diagram. The evolution of Raman features at wavenumbers from 150 to 350 cm{sup -1} exhibits two transitionlike features. Merging of the 225 and 250 cm{sup -1} modes at MCN=2.5 is a symbol of the extinction of Se-Se bonds. Additionally, the appearance of two modes at 280-290 and 170 cm{sup -1} at MCN>2.7 come from the defect modes of ethanelike Ge{sub 2}Se{sub 6/2}. The increase in the scattering from these defects is an important factor leading to enhanced optical loss in the glasses with high MCN.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, characterization, and application of surface-functionalized ordered mesoporous nanoparticles

The dissertation begins with Chapter 1, which is a general introduction of the fundamental synthesis of mesoporous silica materials, the selective functionlization of mesoporous silica materials, and the synthesis of nanostructured porous materials via nanocasting. In Chapter 2, the thermo-responsive polymer coated mesoporous silica nanoparticles (MSN) was synthesized via surface-initated polymerization and exhibited unique partition activities in a biphasic solution with the thermally induced change. In Chapter 3, the monodispersed spherical MSN with different mesoporous structure (MCM-48) was developed and employed as a template for the synthesis of mesoporous carbon nanoparticles (MCN) via nanocasting. MCN was demonstrated for the delivery of membrane impermeable chemical agents inside the cells. The cellular uptake efficiency and biocompabtibility of MCN with human cervical cancer cells were also investigated. In addition to the biocompabtibility of MCN, MCN was demonstrated to support Rh-Mn nanoparticles for catalytic reaction in Chapter 4. Owing to the unique mesoporosity, Rh-Mn nanoparticles can be well distributed inside the mesoporous structure and exhibited interesting catalytic performance on CO hydrogenation. In Chapter 5, the synthesis route of the aforementioned MCM-48 MSN was discussed and investigated in details and other metal oxide nanoparticles were also developed via nanocasting by using MCM-48 MSN as a template. At last, there is a general conclusion summarized in Chapter 6.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cashew nut roasting: Chemical characterization of particulate matter and genotocixity analysis

Background: Particulate matter (PM) is potentially harmful to health and related to genotoxic events, an increase in the number of hospitalizations and mortality from respiratory and cardiovascular diseases. The present study conducted the first characterization of elemental composition and polycyclic aromatic hydrocarbon (PAH) analysis of PM, as well as the biomonitoring of genotoxic activity associated to artisanal cashew nut roasting, an important economic and social activity worldwide. Methods: The levels of PM{sub 2.5} and black carbon were also measured by gravimetric analysis and light reflectance. The elemental composition was determined using X-ray fluorescence spectrometry and PAH analysis was carried out by gas chromatography–mass spectrometry. Genotoxic activity was measured by the Tradescantia pallida micronucleus bioassay (Trad-MCN). Other biomarkers of DNA damage, such as nucleoplasmic bridges and nuclear fragments, were also quantified. Results: The mean amount of PM{sub 2.5} accumulated in the filters (January 2124.2 µg/m{sup 3}; May 1022.2 µg/m{sup 3}; September 1291.9 µg/m{sup 3}), black carbon (January 363.6 µg/m{sup 3}; May 70 µg/m{sup 3}; September 69.4 µg/m{sup 3}) and concentrations of Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br and Pb were significantly higher than the non-exposed area. Biomass burning tracers K, Cl, and S were the major inorganic compounds found. Benzo[k]fluoranthene, indene[1,2,3-c,d]pyrene, benzo[ghi]perylene, phenanthrene and benzo[b]fluoranthene were the most abundant PAHs. Mean benzo[a]pyrene-equivalent carcinogenic power values showed a significant cancer risk. The Trad-MCN bioassay revealed an increase in micronucleus frequency, 2–7 times higher than the negative control and significantly higher in all the months analyzed, possibly related to the mutagenic PAHs found. Conclusions: This study demonstrated that artisanal cashew nut roasting is a serious occupational problem, with harmful effects on workers' health. Those involved in this activity are exposed to higher PM{sub 2.5} concentrations and to 12 PAHs considered potentially mutagenic and/or carcinogenic. The Trad-MCN with T. pallida was sensitive and efficient in evaluating the genotoxicity of the components and other nuclear alterations may be used as effective biomarkers of DNA damage. - Highlights: • The cashew nut roasting generated high concentrations of particulate matter fine. • The biomass burning tracers K, Cl, S were the major inorganic compounds found. • It was identified 12 PAHs considered to be potentially mutagenic and/or carcinogenic. • The genotoxic potential of this activity was confirmed by the Trad MCN assay. • This activity is a serious occupational problem with harmful effects to health workers.

54 ENVIRONMENTAL SCIENCES↗

Mission Critical Networking

Mission-Critical Networking (MCN) refers to networking for application domains where life or livelihood may be at risk. Typical application domains for MCN include critical infrastructure protection and operation, emergency and crisis intervention, healthcare services, and military operations. Such networking is essential for safety, security and economic vitality in our complex world characterized by uncertainty, heterogeneity, emergent behaviors, and the need for reliable and timely response. MCN comprise networking technology, infrastructures and services that may alleviate the risk and directly enable and enhance connectivity for mission-critical information exchange among diverse, widely dispersed, mobile users.

99 GENERAL AND MISCELLANEOUS↗

Dielectric silicone elastomers with mixed ceramic nanoparticles

Highlights: • Composite ceramics nanoparticles (MCN) with zirconium dioxide and lead zirconate. • Dielectric elastomer films wDith PDMS matrix and MCN as dielectric filler. • Hydrophobic character—water resistant and good flexibility specific to siloxanes. • Increased value of dielectric constant with the content of MCN in dielectric films. • Increased energy output from uniaxial deformation of the dielectric elastomer films. - Abstract: A ceramic material consisting in a zirconium dioxide-lead zirconate mixture has been obtained by precipitation method, its composition being proved by wide angle X-ray powder diffraction and energy-dispersive X-ray spectroscopy. The average diameter of the ceramic particles ranged between 50 and 100 nm, as revealed by transmission electron microscopy images. These were surface treated and used as filler for a high molecular mass polydimethylsiloxane-α,ω-diol (Mn = 450,000) prepared in laboratory, the resulted composites being further processed as films and crosslinked. A condensation procedure, unusual for polydimethylsiloxane having such high molecular mass, with a trifunctional silane was approached for the crosslinking. The effect of filler content on electrical and mechanical properties of the resulted materials was studied and it was found that the dielectric permittivity of nanocomposites increased in line with the concentration of ceramic nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical properties of Mn-Co-Ni-O thin films prepared by radio frequency sputtering deposition

Mn{sub 1.4}Co{sub 1.0}Ni{sub 0.6}O{sub 4} (MCN) thin films are prepared by RF sputtering deposition method on amorphous Al{sub 2}O{sub 3} substrate. Microstructure and X-ray photoelectron spectroscopy analyses suggest improvements in crystallinity and stoichiometry for MCN films with post-annealed process. Infrared (IR) optical constants of the MCN films are obtained by IR spectroscopic ellipsometer (SE) in the range of 1500 cm{sup −1} to 3200 cm{sup −1} (2.8–6.7 μm). The derived effective charge supports the increase of the oxidation after annealing. The dielectric function of the films is also extracted by SE in the range of 300–1000 nm adopting a double Lorentz model together with a Tauc–Lorentz model. The mechanism in electronic transition process is discussed based on the variation observed in the optical absorption spectra of the as-grown and post-annealed samples. The optical absorption peaks located at 1.7 eV, 2.4–2.6 eV, and 3.5–4 eV are attributed to the charge-transfer transitions of 2p electrons of oxygen ions and 3d electrons of Mn and Co ions. Our results are very important to understand the optoelectronic mechanism and exploit applications of metal oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of the 2008 Predictions of Run-Timing and Survival of Wild Migrant Yearling Chinook and Steelhead on the Columbia and Snake Rivers.

Columbia Basin Research uses the COMPASS model on a daily basis during the outmigration of Snake River Chinook and steelhead smolts to predict downstream passage and survival. Fish arrival predictions and observations from program RealTime along with predicted and observed environmental conditions are used to make in-season predictions of arrival and survival to various dams in the Columbia and Snake Rivers. For 2008, calibrations of travel and survival parameters for two stocks of fish-Snake River yearling PIT-tagged wild chinook salmon (chin1pit) and Snake River PIT-tagged steelhead (lgrStlhd)-were used to model travel and survival of steelhead and chinook stocks from Lower Granite Dam (LWG) or McNary Dam (MCN) to Bonneville Dam (BON). This report summarizes the success of the COMPASS/RealTime process to model these migrations as they occur. We compared model results on timing and survival to data from two sources: stock specific counts at dams and end-of-season control survival estimates (Jim Faulkner, NOAA, pers. comm. Dec. 16, 2008). The difference between the predicted and observed day of median passage and the Mean Absolute Deviation (MAD) between predicted and observed arrival cumulative distributions are measures of timing accuracy. MAD is essentially the average percentage error over the season. The difference between the predicted and observed survivals is a measure of survival accuracy. Model results and timing data were in good agreement from LWG to John Day Dam (JDA). Predictions of median passage days for the chin1pit and lgrStlhd stocks were 0 and 2 days (respectively) later than observed. MAD for chin1pit and lgrStlhd stocks at JDA were 2.3% and 5.9% (respectively). Between JDA and BON modeling and timing data were not as well matched. At BON, median passage predictions were 6 and 10 days later than observed and MAD values were 7.8% and 16.0% respectively. Model results and survival data were in good agreement from LWG to MCN. COMPASS predicted survivals of 0.77 and 0.69 for chin1pit and lgrStlhd, while the data control's survivals were 0.79 and 0.68. The differences are 0.02 and 0.01 (respectively), nearly identical. However, from MCN to BON, COMPASS predicted survivals of 0.74 and 0.69 while the data controls survivals were 0.47 and 0.53 respectively. Differences of 0.27 and 0.16. In summary: Travel and survival of chin1pit and lgrStlhd stocks were well modeled in the upper reaches. Fish in the lower reaches down through BON suffered unmodeled mortality, and/or passed BON undetected. A drop in bypass fraction and unmodeled mortality during the run could produce such patterns by shifting the observed median passage day to appear artificially early.

13 HYDRO ENERGY↗

Cellular entry via an actin and clathrin-dependent route is required for Lv2 restriction of HIV-2

Lv2 is a human factor that restricts infection of some HIV-2 viruses after entry into particular target cells. HIV-2 MCR is highly susceptible to Lv2 whereas HIV-2 MCN is not. The block is after reverse transcription but prior to nuclear entry. The viral determinants for this restriction have been mapped to the HIV-2 envelope and the capsid genes. Our model of Lv2 restriction suggests that the route taken into a cell is important in determining whether a productive infection occurs. Here we characterised the infectious routes used by MCN and MCR using chemical compounds and molecular techniques to distinguish between potential pathways. Our results suggest that susceptible MCR can enter restrictive HeLa{sup CD4} cells via two pathways; a clathrin/AP2 mediated endocytic route that is sensitive to Lv2 restriction and an alternative, non-clathrin mediated route, which results in more efficient infection.

60 APPLIED LIFE SCIENCES↗

Chemical order in Ge{sub x}As{sub y}Se{sub 1-x-y} glasses probed by high resolution X-ray photoelectron spectroscopy

We have measured high-resolution x-ray photoelectron spectra of Ge{sub x}As{sub y}Se{sub 1-x-y} glasses with a mean coordination number (MCN) from 2.2 to 2.78. The valence band spectra showed that a number of Se–Se–Se trimers can be found in Se-rich samples, whilst multiband features induced by phase separation can be observed in extremely Se-poor samples. When the Ge, As, and Se 3d spectra were decomposed into several doublets, which correspond, respectively, to different chemical environments, the perfect AsSe{sub 3/2} pyramidal and GeSe{sub 4/2} tetrahedral structures in Se-rich samples gradually evolved into defect structures, including As–As and Ge–Ge homopolar bonds, with increasing Ge and As concentrations. Two transition-like features were found at MCN = 2.5 and 2.64–2.72 that correspond first to the disappearance of Se-chains in the glass network and, subsequently, destruction of the perfect GeSe{sub 4/2} tetrahedral structures, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of substituents on the nature of metal⋯π interaction and its cooperativity with halogen bond

High-level quantum chemical calculations have been performed to investigate the influence of substituents on the metal—π interaction and its cooperative effect with halogen bond in C{sub 2}X{sub 4}⋯MCN⋯ClF (X = H, CN, CH{sub 3}; M = Cu, Ag, Au). The strong electron-withdrawing group CN weakens the metal—π covalent interaction, while the weak electron-withdrawing group CH{sub 3} strengthens it. The metal—π covalent interaction is dominated by electrostatic energy although the AuCN complex has approximately equal electrostatic and polarization contributions. However, the metal—π covalent interaction is governed by polarization energy due to the CN substitution. A cooperative effect is found for the halogen bond and metal—π interactions in C{sub 2}H{sub 4}⋯MCN⋯ClF, while a diminutive effect occurs in the triads by the CN substituent. Orbital interaction analysis indicates that the strong electron-withdrawing group CN causes the C=C group vary from a stronger donor orbital to a stronger acceptor orbital.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Syntheses, topological analyses and photoelectric properties of Ag(I)/Cu(I) metal-organic frameworks based on a tetradentate imidazolate ligand

A new tetradentate imidazolate ligand 1,1',1'',1'''-(2,2',4,4',6,6'-hexamethylbiphenyl-3,3',5,5'-tetrayl) tetrakis(methylene)(1H-imidazole) (L) and four Ag(I)/Cu(I) coordination polymers, namely [(MCN){sub 3}L]{sub n} (1: M=Ag; 2: M=Cu), and [(MSCN){sub 2}L]{sub n} (3: M=Ag; 4: M=Cu) are described. All four new coordination polymers were fully characterized by infrared spectroscopy, elemental analysis and single-crystal X-ray diffraction. Compound 1 features a 3D supramolecular framework constructed by 1D chains through inter-chain Ag-N(CN) and inter-layer Ag-N(L) weak interactions with an uninodal 6{sup 6} topology. Complex 2 presents a 3D framework characterized by a tetranodal (3,4)-connected (3.4.5.10{sup 2}.11)(3.4.5.6.7.9)(3.6.7)(6.10{sup 2}) topology. Complexes 3 and 4 are isostructural, and both have a 3D network of trinodal 4-connected (4.8{sup 5}){sub 2}(4{sup 2}.8{sup 2}.10{sup 2})(4{sup 2}.8{sup 4}){sub 2} topology. The luminescent properties for these compounds in the solid state as well as the possible ferroelectric behavior of 1 are discussed. - Graphical abstract: Four coordination polymers built upon Ag(I)/Cu(I) pseudohalides and a imidazolate ligand have been solvothermally synthesized. The luminescent properties for these compounds and the possible ferroelectric behavior of 1 are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of amines on formation of sub-3 nm particles and their subsequent growth

Field observations and quantum chemical calculations suggest that amines can be important for formation of nanometer size particles. Amines and ammonia often have common atmospheric emission sources and the similar chemical and physical properties. While the effects of ammonia on aerosol nucleation have been previously investigated, laboratory studies of homogeneous nucleation involving amines are lacking. We have made kinetics studies of multicomponent nucleation (MCN) with sulfuric acid, water, ammonia and amines under conditions relevant to the atmosphere. Low concentrations of aerosol precursors were measured with chemical ionization mass spectrometers (CIMS) to provide constrained precursor concentrations needed for nucleation. Particle sizes larger than {approx}2 nm were measured with a nano-differential mobility analyzer (nano-DMA), and number concentrations of particles larger than {approx}1 nm were measured with a particle size magnifier (PSM). Our observations provide the laboratory evidence that amines indeed can participate in aerosol nucleation and growth at the molecular cluster level. The enhancement of particle number concentrations due to several atmospherically relevant amine compounds and ammonia were related to the basicity of these compounds, indicating that acid-base reactions may contribute to the formation of sub-3 nm particles.

54 ENVIRONMENTAL SCIENCES↗

Neutron Leakage Spectrum from a Pulsed Uranium Sphere [Slides]

The neutron leakage spectrum from a pulsed uranium sphere was calculated with MCNP5 and found to be in good agreement with previous “MCN” simulations and experimental data. This example is proposed as another time-of-flight (TOF) test problem for NUEXS, a code for diagnostic simulation maintained by LANL Group P-23.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High Performance Computing to Quantify the Evolution of Microscopic Concentration Gradients During Flash Processing

During the Flash process, the cross section of a plain-carbon or a low-alloy steel is austenitized through rapid heating and transformed on rapid cooling to a predominantly martensite + bainite structure with small amounts of retained austenite. Unlike conventional heat treating, homogeneity is intentionally avoided during Flash processing of steels. The Flash process assembly consists of a pair of rolls that transfer the steel sheets through the heating and cooling stage of the thermal cycle. The initial microstructure of the steel consists of ferrite (body-centered cubic iron) + carbide ((Fe,X)mCn) mixture. The heating rate through the peak temperature is a function of temperature and reaches a peak of about 300-400°C/s and the cooling rate has a maximum value of 3,000-4,000°C/s. The on-heating phase transformations include carbide dissolution, austenite (face-centered cubic iron) nucleation and growth, and diffusion of carbon and other substitutional elements in the steel. The on-cooling phase transformations include formation of martensite (body-centered tetragonal phase containing supersaturated solute) and bainite (ferrite plates with or without fine carbides). In this project, the focus is on Fe-C-Cr steels that are currently Flash processed for armor applications. The modeling effort proposed here will help optimize the Flash thermal cycle for these low alloy steels to achieve the target performance, which is an ongoing effort at SFP Works. A significant feature of Flash processed Fe-C-Cr steels is the presence of scatter in the through-thickness in the sheet. The variability in hardness results from a variability in the bainite + martensite microstructure that is sensitive to the local chemical concentration of C and Cr. Such a chemical inhomogeneity is intentionally obtained in the Flash process. Although such a microstructural gradient is presumably responsible for the exceptional properties of the Flash processed steel, it is very important to quantify the gradients as a function of Flash variabilities in processing parameters and the input microstructure. Understanding the mechanistic pathway that leads to microstructural gradients could be ground-breaking and instrumental for achieving better process control and optimized microstructural state to meet application-specific strength-ductility requirements. Since the final microstructure depends on setting up precise solute concentration gradients through a rapid heating process, and transforming these regions into various phases, it is important to understand how small changes in steel chemistry, input microstructure (carbide size and distribution), and process variables (Flash thermal cycle) will impact the solute concentration gradients.

97 MATHEMATICS AND COMPUTING↗

The History of Monte Carlo and MCNP at Los Alamos [Slides]

The Monte Carlo method for radiation particle transport has its origins at LANL dating back to the 1940’s. The creators of these methods were Drs. Stanislaw Ulam, John von Neumann, Robert Richtmyer, and Nicholas Metropolis. Monte Carlo methods for particle transport have been driving computational developments since the beginning of modern computers; this continues today. In the 1950’s and 1960’s, these new methods were organized into a series of special-purpose Monte Carlo codes, including MCS, MCN, MCP, and MCG. These codes were able to transport neutrons and photons for specialized LANL applications. In 1977, these separate codes were combined to create the LANL Monte Carlo N-Particle (MCNP) radiation particle transport code. In 1983, MCNP3 was released for public distribution to the Radiation Safety Information Computational Center (RSICC). MCNP6.3 will be released late in 2021. Each year, LANL has ~100 MCNP new users and RSICC ~1250 new licenses distributed. This talk will review the Los Alamos history of the development of the modern Monte Carlo method and MCNP.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dissociation of misfit and threading dislocations in Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} epitaxial film

Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} film was epitaxially grown on a (001) LaAlO{sub 3} substrate using single-target pulsed laser deposition. The dissociation of misfit and threading dislocations in the epitaxial Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} film was investigated using high-resolution transmission electron microscopy (HRTEM). For a misfit dislocation with a Burgers vector of [200], it was shown that it could dissociate into four partial dislocations with Burgers vector of type 1/2 < 110>. For the threading dislocations, it was found that they usually coexist with stacking faults. The formation mechanism for the dissociated dislocations was discussed. All the dislocations can relieve the local strain in the Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} epitaxial film. - Research Highlights: {yields}Dissociation behaviour of misfit dislocations in Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} film. {yields}Dissociation behaviour of threading dislocations in Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} film. {yields}Formation mechanism of the dissociated dislocations.

36 MATERIALS SCIENCE↗

Bismuth-induced dielectric relaxation in the (1-x)La(Mg{sub 1/2}Ti{sub 1/2})O{sub 3}-xBi(Mg{sub 1/2}Ti{sub 1/2})O{sub 3} perovskite system

The temperature variation of the dielectric permittivity and loss of the solid solutions (1-x)La(Mg{sub 1/2}Ti{sub 1/2})O{sub 3}-xBi(Mg{sub 1/2}Ti{sub 1/2})O{sub 3} [(1-x)LMT-xBMT] (0{<=}x{<=}0.3) measured at radio, microwave, and far infrared frequency ranges has been analyzed in comparison with that observed in other bismuth-containing and bismuth-free perovskite ceramics based on LMT. It has been found that the low temperature dielectric response of the (1-x)LMT-xBMT compositions with x{>=}0 is frequency dependent over a wide range from radio to microwave frequencies. The considerable compositional growth of the dielectric permittivity and loss associated with the amount of bismuth in the system was revealed to be not contributed by the lattice polar phonon modes. The effect was suggested to be related to the low-temperature dielectric relaxation process due to a hopping movement of charge carriers in crystallographic A-sites of the perovskite lattice. Particular role of local lattice distortions caused by the anisotropic chemical bonds involving bismuth 6s{sup 2} electrons in a localization of hopping charge carriers in perovskites and other oxygen-octahedral compositions is considered. The characteristic features of the Bi-induced dielectric relaxation and those typical of the ferroelectric relaxors are compared and discussed.

36 MATERIALS SCIENCE↗