Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAPLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Tree growth, transpiration, and water-use efficiency between shoreline and upland red maple (Acer rubrum) trees in a coastal forest

Coastal shoreline forests are vulnerable to seawater exposure, the impacts of which will increase due to sea-level rise, but the longterm adaption strategies and vulnerability of coastal forests are not well understood. We used whole-tree transpiration, leaf water potential, tree-ring width, and tree-ring d13C (a proxy for intrinsic water use efficiency, iWUE) to examine the long-term adaption strategies of red maple (Acer rubrum) trees at the coastal interface (i.e., shoreline) and nearby upland in Maryland, USA. Red maple trees that grew along the shoreline and were exposed to slightly saline water (up to two PSU) had higher transpiration rates than those growing in the nearby upland forest during a wet year, but these differences disappeared during a normal precipitation year. Shoreline trees grew more slowly than upland trees over the last four decades, but these growth differences have disappeared in the last six years. Shoreline and upland trees had similar variation in iWUE, indicating that higher transpiration rates of the seawater exposed trees did not translate into differences in water use efficiency. There were no differences in predawn and midday water potential between upland and shoreline trees, suggesting no water stress occurs in shoreline trees. These findings indicate that urrent soil salinity is below the threshold to constrain coastal red maple physiological activities.

Wang, Wenzhi↗

Molecular weight dependent structure and charge transport in MAPLE-deposited poly(3-hexylthiophene) thin films

In this work, poly(3-hexylthiophene) (P3HT) films prepared using the matrix-assisted pulsed laser evaporation (MAPLE) technique are shown to possess morphological structures that are dependent on molecular weight (MW). Specifically, the structures of low MW samples of MAPLE-deposited film are composed of crystallites/aggregates embedded within highly disordered environments, whereas those of high MW samples are composed of aggregated domains connected by long polymer chains. Additionally, the crystallite size along the side-chain (100) direction decreases, whereas the conjugation length increases with increasing molecular weight. This is qualitatively similar to the structure of spin-cast films, though the MAPLE-deposited films are more disordered. In-plane carrier mobilities in the MAPLE-deposited samples increase with MW, consistent with the notion that longer chains bridge adjacent aggregated domains thereby facilitating more effective charge transport. The carrier mobilities in the MAPLE-deposited simples are consistently lower than those in the solvent-cast samples for all molecular weights, consistent with the shorter conjugation length in samples prepared by this deposition technique.

36 MATERIALS SCIENCE↗

Production of renewable alcohols from maple wood using supercritical methanol hydrodeoxygenation in a semi-continuous flowthrough reactor

Biomass conversion to alcohols using supercritical methanol depolymerization and hydrodeoxygenation (SCM-DHO) with CuMgAl mixed metal oxide is a promising process for biofuel production. Here, we demonstrate how maple wood can be converted at high weight loadings and product concentrations in a batch and a semi-continuous reactor to a mixture of C 2 –C 10 linear and cyclic alcohols. Maple wood was solubilized semi-continuously in supercritical methanol and then converted to a mixture of C 2 –C 9 alcohols and aromatics over a packed bed of CuMgAlO x catalyst. Up to 95 wt% of maple wood can be solubilized in the methanol by using four temperature holds at 190, 230, 300, and 330 °C. Lignin was solubilized at 190 and 230 °C to a mixture of monomers, dimers, and trimers while hemicellulose and cellulose solubilized at 300 and 330 °C to a mixture of oligomeric sugars and liquefaction products. The hemicellulose, cellulose, and lignin were converted to C 2 –C 10 alcohol fuel precursors over a packed bed of CuMgAlO x catalyst with 70–80% carbon yield of the entire maple wood. The methanol reforming activity of the catalyst decreased by 25% over four beds of biomass, which corresponds to 5 turnovers for the catalyst, but was regenerable after calcination and reduction. In batch reactions, maple wood was converted at 10 wt% in methanol with 93% carbon yield to liquid products. The product concentration can be increased to 20 wt% by partially replacing the methanol with liquid products. The yield of alcohols in the semi-continuous reactor was approximately 30% lower than in batch reactions likely due to degradation of lignin and cellulose during solubilization. These results show that solubilization of whole biomass can be separated from catalytic conversion of the intermediates while still achieving a high yield of products. However, close contact of the catalyst and the biomass during solubilization is critical to achieve the highest yields and concentration of products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RIR-MAPLE deposition of conjugated polymers and hybrid nanocomposites for application to optoelectronic devices

Resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) is a variation of pulsed laser deposition that is useful for organic-based thin films because it reduces material degradation by selective absorption of infrared radiation in the host matrix. A unique emulsion-based RIR-MAPLE approach has been developed that reduces substrate exposure to solvents and provides controlled and repeatable organic thin film deposition. In order to establish emulsion-based RIR-MAPLE as a preferred deposition technique for conjugated polymer or hybrid nanocomposite optoelectronic devices, studies have been conducted to demonstrate the value added by the approach in comparison to traditional solution-based deposition techniques, and this work will be reviewed. The control of hybrid nanocomposite thin film deposition, and the photoconductivity in such materials deposited using emulsion-based RIR-MAPLE, will also be reviewed. The overall result of these studies is the demonstration of emulsion-based RIR-MAPLE as a viable option for the fabrication of conjugated polymer and hybrid nanocomposite optoelectronic devices that could yield improved device performance.

36 MATERIALS SCIENCE↗

Simulated changes in biogenic VOC emissions and ozone formation from habitat expansion of Acer Rubrum (red maple)

A new vegetation trend is emerging in northeastern forests of the United States, characterized by an expansion of red maple at the expense of oak. This has changed emissions of biogenic volatile organic compounds (BVOCs), primarily isoprene and monoterpenes. Oaks strongly emit isoprene while red maple emits a negligible amount. This species shift may impact nearby urban centers because the interaction of isoprene with anthropogenic nitrogen oxides can lead to tropospheric ozone formation and monoterpenes can lead to the formation of particulate matter. Here in this study the Global Biosphere Emissions and Interactions System was used to estimate the spatial changes in BVOC emission fluxes resulting from a shift in forest composition between oak and maple. A 70% reduction in isoprene emissions occurred when oak was replaced with maple. Ozone simulations with a chemical box model at two rural and two urban sites showed modest reductions in ozone concentrations of up to 5–6 ppb resulting from a transition from oak to red maple, thus suggesting that the observed change in forest composition may benefit urban air quality. This study illustrates the importance of monitoring and representing changes in forest composition and the impacts to human health indirectly through changes in BVOCs.

54 ENVIRONMENTAL SCIENCES↗

Molecular organization in MAPLE-deposited conjugated polymer thin films and the implications for carrier transport characteristics

The morphological structure of poly(3-hexylthiophene) (P3HT) thin films deposited by both Matrix Assisted Pulsed Laser Evaporation (MAPLE) and solution spin-casting methods are investigated. We found that the MAPLE samples possessed a higher degree of disorder, with random orientations of polymer crystallites along the side-chain stacking, π-π stacking, and conjugated backbone directions. Furthermore, the average molecular orientations and relative degrees of crystallinity of MAPLE-deposited polymer films are insensitive to the chemistries of the substrates onto which they were deposited; this is in stark contrast to the films prepared by the conventional spin-casting technique. In spite of the seemingly unfavorable molecular orientations and the highly disordered morphologies, the in-plane charge carrier transport characteristics of the MAPLE samples are comparable to those of spin-cast samples, exhibiting similar transport activation energies (56 meV versus 54 meV) to those reported in the literature for high mobility polymers.

36 MATERIALS SCIENCE↗

Crystallization Mechanism and Charge Carrier Transport in MAPLE-Deposited Conjugated Polymer Thin Films

Although spin casting and chemical surface reactions are the most common methods used for fabricating functional polymer films onto substrates, they are limited with regard to producing films of certain morphological characteristics on different wetting and nonwetting substrates. The matrix-assisted pulsed laser evaporation (MAPLE) technique offers advantages with regard to producing films of different morphologies on different types of substrates. Here, we provide a quantitative characterization, using X-ray diffraction and optical methods, to elucidate the additive growth mechanism of MAPLE-deposited poly(3-hexylthiophene) (P3HT) films on substrates that have undergone different surface treatments, enabling them to possess different wettabilities. We show that MAPLE-deposited films are composed of crystalline phases, wherein the overall P3HT aggregate size and crystallite coherence length increase with deposition time. A complete pole figure constructed from X-ray diffraction measurements reveals that in these MAPLE-deposited films, there exist two distinct crystallite populations: (i) highly oriented crystals that grow from the flat dielectric substrate and (ii) misoriented crystals that preferentially grow on top of the existing polymer layers. The growth of the highly oriented crystals is highly sensitive to the chemistry of the substrate, whereas the effect of substrate chemistry on misoriented crystal growth is weaker. The use of a self-assembled monolayer to treat the substrate greatly enhances the population and crystallite coherence length at the buried interfaces, particularly during the early stage of deposition. Furthermore, the evolution of the in-plane carrier mobilities during the course of deposition is consistent with the development of highly oriented crystals at the buried interface, suggesting that this interface plays a key role toward determining carrier transport in organic thin-film transistors.

36 MATERIALS SCIENCE↗

Acute O3 damage on first year coppice sprouts of aspen and maple sprouts in an open-air experiment

We studied the effect of high ozone (O{sub 3}) concentration (110-490 nmol mol{sup -1}) on regenerating aspen (Populus tremuloides) and maple (Acer saccharum) trees at an open-air O{sub 3} pollution experiment near Rhinelander WI USA. This study is the first of its kind to examine the effects of acute O{sub 3} exposure on aspen and maple sprouts after the parent trees, which were grown under elevated O{sub 3} and/or CO{sub 2} for 12 years, were harvested. Acute O{sub 3} damage was not uniform within the crowns of aspen suckers; it was most severe in the mature, fully expanded photosynthesizing leaves. Young expanding leaves showed no visible signs of acute O{sub 3} damage contrary to expectations. Stomatal conductance played a primary role in the severity of acute O{sub 3} damage as it directly controlled O{sub 3} uptake. Maple sprouts, which had lower stomatal conductance, smaller stomatal aperture, higher stomatal density and larger leaf surface area, were tolerant of acute O{sub 3} exposure. Moreover, elevated CO{sub 2} did not ameliorate the adverse effects of acute O{sub 3} dose on aspen and maple sprouts, in contrast to its ability to counteract the effects of long-term chronic exposure to lower O{sub 3} levels.

09 BIOMASS FUELS↗

Phenomenological mechanisms of hybrid organic–inorganic perovskite thin film deposition by RIR-MAPLE

Resonant infrared, matrix-assisted pulsed laser evaporation (RIR-MAPLE) is a promising technique for the physical vapor deposition of hybrid organic–inorganic perovskites. The approach already has been used to deposit both three-dimensional and two-dimensional hybrid perovskites with material quality comparable to those synthesized by solution processing. However, the phenomenological mechanisms of hybrid perovskite film formation by RIR-MAPLE have not been articulated. Therefore, this work presents a careful investigation of film formation mechanisms of three-dimensional methylammonium lead halide perovskites by considering the temporal evolution of morphology, crystallinity, and optical properties of films deposited by RIR-MAPLE.

Barraza, E. T. (ORCID:0000000328681496)↗

AmeriFlux FLUXNET-1F US-PFj NE4 Maple-1 CHEESEHEAD 2019

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-PFj NE4 Maple-1 CHEESEHEAD 2019. This is the FLUXNET version of the carbon flux data for the site US-PFj NE4 Maple-1 CHEESEHEAD 2019 produced by applying the standard ONEFlux (1F) software. Site Description - This tower (32m, trailer-based, telescoping) is located in the northeastern quadrant of the 10 x 10km study domain. It is located in a maple forest (canopy height: 18 - 20m). Some conifers mixed in, more conifers to the NNW.

Desai, Ankur [University of Wisconsin-Madison]↗

Hot Water Extraction Improves the Characteristics of Willow and Sugar Maple Biomass With Different Amount of Bark

Shrub willows are being developed as a short rotation woody crop (SRWC) that can grow on marginal agricultural land. Willow has a high net energy ratio (energy produced/ fossil fuel energy consumed), low greenhouse gas footprint and high carbohydrate production potential. Willow biomass can be combined with forest biomass, but willow often has a higher proportion of bark that creates challenges because it increases the ash content and decreases the melting point. Hot water extraction is a pretreatment that has been shown to improve the quality of chipped material while producing a marketable stream of byproducts. This study evaluated how the amount of bark (0%, 33%, 66% and 100%) on three willow cultivars and sugar maple impact the output of hot water extraction in terms of mass removal and extract composition, as well as its influence on the heating value, ash and elemental content. The hot water extraction process resulted in ash content up to 50% for sugar maple and willow, but there was variation among the willow varieties. The heating value after hot water extraction was about 5% higher because of the removal of mostly hemicelluloses, which have relatively low heating value. HWE led to significant reductions of calcium, potassium, magnesium and sulfur contents. The hot water extraction provides a fermentable sugar stream and other coproducts after multiple separation and treatment steps, and improves the characteristics of willow and sugar maple biomass for combined heat and power. This paper demonstrates how biomass with higher bark content can generate a useable sugar stream while improving the quality of the biomass for combined heat and power by managing its ash content while simultaneously producing other valuable products.

09 BIOMASS FUELS↗

Definite Integrals, Some Involving Residue Theory Evaluated by Maple Code

The calculus of residue is applied to evaluate certain integrals in the range (-{infinity} to {infinity}) using the Maple symbolic code. These integrals are of the form {integral}{sub -{infinity}}{sup {infinity}} cos(x)/[(x{sup 2} + a{sup 2})(x{sup 2} + b{sup 2}) (x{sup 2} + c{sup 2})]dx and similar extensions. The Maple code is also applied to expressions in maximum likelihood estimator moments when sampling from the negative binomial distribution. In general the Maple code approach to the integrals gives correct answers to specified decimal places, but the symbolic result may be extremely long and complex.

97 MATHEMATICS AND COMPUTING↗

MAPLE v.1.0

SAND2025-00659O MAPLE is a software tool that uses epigenomic data to predict gene expression. MAPLE uses a set of epigenomic modifications to determine the effect on gene expression in a specific subset of species. The algorithm can be trained on additional species and epigenomic modifications, enhancing its predictive capabilities. EAGLE employs a hybrid neural network architecture, featuring a convolutional front-end and a multi-head attention layer, to process pre-processed signal data as input. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

Davis IV, Warren↗

AmeriFlux US-PFj NE4 Maple-1 CHEESEHEAD 2019

This is the AmeriFlux version of the carbon flux data for the site US-PFj NE4 Maple-1 CHEESEHEAD 2019. Site Description - This tower (32m, trailer-based, telescoping) is located in the northeastern quadrant of the 10 x 10km study domain. It is located in a maple forest (canopy height: 18 - 20m). Some conifers mixed in, more conifers to the NNW.

Desai, Ankur↗

Comparative Study on the Pretreatment of Aspen and Maple With 1-Ethyl-3-methylimidazolium Acetate and Cholinium Lysinate

The efficiency of the enzymatic digestibility of certain lignocellulosic biomass has been observed as a function of their structural and chemical changes which in turn depends on the ionic liquid (IL) used as the pretreatment solvent. This study demonstrated and compared the feasibility of the IL pretreatment process for two woody biomasses, namely maple and aspen, using two mechanistically distinct ILs, i.e., 1-ethyl-3-methylimidazolium acetate (C 2 mim][OAc]) and cholinium lysinate ([Ch][Lys]) as the solvent. The pretreatment was performed at three different temperatures of 100°C, 140°C, and 160°C at a high solid loading of 25 wt% to understand the impact of lignin content and crystallinity index on enzymatic digestibility. Saccharification of the biomass obtained after the IL pretreatment afforded 30–85% glucan conversions. For aspen, both [C 2 mim][OAc] and [Ch][Lys] exhibited the highest glucan conversion at 140°C. For maple, the highest glucan conversion was obtained at 140°C with [C 2 mim][OAc], whereas [Ch][Lys] had an optimum glucan conversion at 160°C. These pretreatments resulted in negligible delignification irrespective of the IL used. A significant loss of crystallinity was observed for all [C 2 mim][OAc]-pretreated biomasses, whereas the pretreatment with [Ch][Lys] resulted in an increase in the crystallinity index.

Choudhary, Hemant↗

The changes in leaf reflectance of sugar maple seedlings (Acer saccharum Marsh) in response to heavy metal stress

The effects of heavy metal stress on leaf reflectance of sugar maple seedlings (Acer saccharum Marsh) are examined. It is found that sugar maple seedlings treated with anomalous amounts of heavy metals in the rooting medium exhibited an increased leaf reflectance over the entire range of investigated wavelengths, from 475 to 1650 nm. These results conform to those of a previous investigation in the wavelengths from 475 to 660nm, but tend to contradict the previous study in the near infrared wavelengths from 1000 to 1650nm. The differences may possible be due to different water regimes in the two investigations.

Schwaller, M. R.↗

The changes in leaf reflectance of sugar maple (Acer saccharum Marsh) seedlings in response to heavy metal stress

The effects of heavy metal stress on leaf reflectance of sugar maple seedlings (Acer saccharum Marsh) are examined. It is found that sugar maple seedlings treated with anomalous amounts of heavy metals in the rooting medium exhibited an increased leaf reflectance over the entire range of investigated wavelengths, from 475 to 1650 nm. These results conform to those of a previous investigation in the wavelengths from 475 to 660 nm, but tend to contradict the previous study in the near infrared wavelengths from 1000 to 1650 nm. The differences may possibly be due to different water regimes in the two investigations. Previously announced in STAR as N81-29729

Schwaller, M. R.↗

Red edge spectral measurements from sugar maple leaves

Many sugar maple stands in the northeastern United States experienced extensive insect damage during the 1988 growing season. Chlorophyll data and high spectral resolution spectrometer laboratory reflectance data were acquired for multiple collections of single detached sugar maple leaves variously affected by the insect over the 1988 growing season. Reflectance data indicated consistent and diagnostic differences in the red edge portion (680-750 nm) of the spectrum among the various samples and populations of leaves. These included differences in the red edge inflection point (REIP), a ratio of reflectance at 740-720 nm (RE3/RE2), and a ratio of first derivative values at 715-705 nm (D715/D705). All three red edge parameters were highly correlated with variation in total chlorophyll content. Other spectral measures, including the Normalized Difference Vegetation Index (NDVI) and the Simple Vegetation Index Ratio (VI), also varied among populations and over the growing season, but did not correlate well with total chlorophyll content. Leaf stacking studies on light and dark backgrounds indicated REIP, RE3/RE2 and D715/D705 to be much less influenced by differences in green leaf biomass and background condition than either NDVI or VI.

Vogelmann, J. E.↗