Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Li(BC)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on Li(BC)2 by Materials Project

Li(BC)2 crystallizes in the trigonal P-3m1 space group. The structure is two-dimensional and consists of one Li(BC)2 sheet oriented in the (0, 0, 1) direction. Li1+ is bonded in a 6-coordinate geometry to six equivalent C+3.50- atoms. All Li–C bond lengths are 2.33 Å. B3+ is bonded in a trigonal planar geometry to three equivalent C+3.50- atoms. All B–C bond lengths are 1.57 Å. C+3.50- is bonded in a distorted trigonal planar geometry to three equivalent Li1+ and three equivalent B3+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Superconductivity in the Li-B-C system at 100 GPa

Layer Li-B-C compounds have been shown to have feasible superconductivity. Using the adaptive genetic algorithm, we predict the structures of the Li-B-C system at 100 GPa. Here we identify several low-enthalpy metallic phases with stoichiometries of Li B 2 C, Li B 3 C, Li 2 BC 2 , Li 3 B 2 C 3 , Li 3 BC, and Li 5 BC. Using a fast screening method of electron-phonon interaction, we find that Li B 3 C is a promising candidate for superconductivity. The consecutive calculations using the full Brillouin zone confirm the existence of the strong electron-phonon coupling (EPC) in this system. The anharmonic B-C phonon modes near the zone center provide the major contribution to the EPC. The EPC constant is 1.40, and the estimated critical temperature is 22 K. In this paper, we indicate that superconductivity can also happen without a layered structural motif in the Li-B-C system. We also demonstrate an effective strategy for crystal structure prediction of superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Comparing the Use of High- to Low-Cost Black Carbon and Carbon Dioxide Sensors for Characterizing On-Road Diesel Truck Emissions

The exhaust plume capture method is a commonly used approach to measure pollutants emitted by in-use heavy-duty diesel trucks. Lower cost sensors, if used in place of traditional research-grade analyzers, could enable wider application of this method, including use as a monitoring tool to identify high-emitting trucks that may warrant inspection and maintenance. However, low-cost sensors have for the most part only been evaluated under ambient conditions as opposed to source-influenced environments with rapidly changing pollutant concentrations. This study compared black carbon (BC) emission factors determined using different BC and carbon dioxide (CO 2 ) sensors that range in cost from $200 to $20,000. Controlled laboratory experiments show that traditional zero and span steady-state calibration checks are not robust indicators of sensor performance when sampling short duration concentration peaks. Fleet BC emission factor distributions measured at two locations at the Port of Oakland in California with 16 BC/CO 2 sensor pairs were similar, but unique sensor pairs identified different high-emitting trucks. At one location, the low-cost PP Systems SBA-5 agreed on the classification of 90% of the high emitters identified by the LI-COR LI-7000 when both were paired with the Magee Scientific AE33. Conversely, lower cost BC sensors when paired with the LI-7000 misclassified more than 50% of high emitters when compared to the AE33/LI-7000. Confidence in emission factor quantification and high-emitter identification improves with larger integrated peak areas of CO 2 and especially BC. This work highlights that sensor evaluation should be conducted under application-specific conditions, whether that be for ambient air monitoring or source characterization.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Laser resonance ionization spectroscopy of thorium

High-lying Rydberg and autoionizing (AI) states of thorium (Th) have been studied via resonance laser ionization spectroscopy at both TRIUMF Canada’s particle accelerator center and Oak Ridge National Lab (ORNL). Multiple Rydberg series converging to the ionization potential (IP) were observed via different stepwise laser excitation schemes and were assigned to be the 6d 2 7s ( 4 F 3/2 ) np, nd, and nf series. Analysis of these series enabled the determination of the IP to be 50 868.735(54) cm −1 , which improved the precision by two orders of magnitude over the current adopted NIST value of 50 867(2) cm −1 . Additionally, four AI Rydberg series were identified and assigned to nf and nd series converging to the 6d 2 7s 4 F 5/2 and 6d7s 2 2 D 3/2 metastable states of Th + . In conclusion, the measured energies of the Rydberg and AI Rydberg states are reported, and observed perturbations within the series are discussed.

Rydberg series↗
DOE OSTI2024

MIXv2: a long-term mosaic emission inventory for Asia (2010–2017)

The MIXv2 Asian emission inventory is developed under the framework of the Model Inter-Comparison Study for Asia (MICS-Asia) Phase IV and produced from a mosaic of up-to-date regional emission inventories. We estimated the emissions for anthropogenic and biomass burning sources covering 23 countries and regions in East, Southeast and South Asia and aggregated emissions to a uniform spatial and temporal resolution for seven sectors: power, industry, residential, transportation, agriculture, open biomass burning and shipping. Compared to MIXv1, we extended the dataset to 2010–2017, included emissions of open biomass burning and shipping, and provided model-ready emissions of SAPRC99, SAPRC07, and CB05. A series of unit-based point source information was incorporated covering power plants in China and India. A consistent speciation framework for non-methane volatile organic compounds (NMVOCs) was applied to develop emissions by three chemical mechanisms. The total Asian emissions for anthropogenic/open biomass sectors in 2017 are estimated as follows: 41.6/1.1 Tg NO x , 33.2/0.1 Tg SO 2 , 258.2/20.6 Tg CO, 61.8/8.2 Tg NMVOC, 28.3/0.3 Tg NH 3 , 24.0/2.6 Tg PM 10 , 16.7/2.0 Tg PM 2.5 , 2.7/0.1 Tg BC (black carbon), 5.3/0.9 Tg OC (organic carbon), and 18.0/0.4 Pg CO 2 . The contributions of India and Southeast Asia were emerging in Asia during 2010–2017, especially for SO 2 , NH 3 and particulate matter. Gridded emissions at a spatial resolution of 0.1° with monthly variations are now publicly available. This updated long-term emission mosaic inventory is ready to facilitate air quality and climate model simulations, as well as policymaking and associated analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Unravelling the Stability Stressors of Atomically Dispersed Fe–N–C Oxygen Reduction Catalysts

Enhancing the catalytic stability of Fe–N–C catalysts for cathodic oxygen reduction in proton-exchange membrane fuel cells (PEMFCs) necessitates an in-depth understanding of their degradation mechanisms. Here, this study identifies key stressors affecting the stability of Fe–N–C catalysts, specifically acidic environment, oxygen (O 2 ), and reactive oxygen species (ROS). Through ex situ/operando experiments, we show that the oxidation of local carbon by acidic environment + O 2 + ROS, along with the demetalation of catalytic FeN x C y sites by O 2 or O 2 + ROS, is the primary factor responsible for the initial fast degradation of Fe–N–C catalysts. The demetalation of FeN x C y sites, influenced by O 2 , in particular by O 2 + ROS, leads to the subsequent gradual degradation of Fe–N–C. Notably, FeN 4 C 12 -type active sites are more susceptible to demetalation than FeN 4 C 10 -type sites in O 2 or O 2 + ROS. Our findings indicate that, besides constructing more stable FeN x C y sites, preventing local carbon oxidation and scavenging of ROS are all critical for maintaining the stability of Fe–N–C catalysts.

Xie, Xiaohong [Pacific Northwest National Laborato↗
DOE OSTI2020

An Exploratory Approach Using Regression and Machine Learning in the Analysis of Mass Absorption Cross Section of Black Carbon Aerosols: Model Development and Evaluation

Mass absorption cross-section of black carbon (MAC BC ) describes the absorptive cross-section per unit mass of black carbon, and is, thus, an essential parameter to estimate the radiative forcing of black carbon. Many studies have sought to estimate MAC BC from a theoretical perspective, but these studies require the knowledge of a set of aerosol properties, which are difficult and/or labor-intensive to measure. We therefore investigate the ability of seven data analytical approaches (including different multivariate regressions, support vector machine, and neural networks) in predicting MAC BC for both ambient and biomass burning measurements. Our model utilizes multi-wavelength light absorption and scattering as well as the aerosol size distributions as input variables to predict MAC BC across different wavelengths. We assessed the applicability of the proposed approaches in estimating MAC BC using different statistical metrics (such as coefficient of determination (R 2 ), mean square error (MSE), fractional error, and fractional bias). Overall, the approaches used in this study can estimate MAC BC appropriately, but the prediction performance varies across approaches and atmospheric environments. Based on an uncertainty evaluation of our models and the empirical and theoretical approaches to predict MAC BC , we preliminarily put forth support vector machine (SVM) as a recommended data analytical technique for use. We provide an operational tool built with the approaches presented in this paper to facilitate this procedure for future users.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A data mining approach to investigate food groups related to incidence of bladder cancer in the BLadder cancer Epidemiology and Nutritional Determinants International Study

Abstract At present, analysis of diet and bladder cancer (BC) is mostly based on the intake of individual foods. The examination of food combinations provides a scope to deal with the complexity and unpredictability of the diet and aims to overcome the limitations of the study of nutrients and foods in isolation. This article aims to demonstrate the usability of supervised data mining methods to extract the food groups related to BC. In order to derive key food groups associated with BC risk, we applied the data mining technique C5.0 with 10-fold cross-validation in the BLadder cancer Epidemiology and Nutritional Determinants study, including data from eighteen case–control and one nested case–cohort study, compromising 8320 BC cases out of 31 551 participants. Dietary data, on the eleven main food groups of the Eurocode 2 Core classification codebook, and relevant non-diet data (i.e. sex, age and smoking status) were available. Primarily, five key food groups were extracted; in order of importance, beverages (non-milk); grains and grain products; vegetables and vegetable products; fats, oils and their products; meats and meat products were associated with BC risk. Since these food groups are corresponded with previously proposed BC-related dietary factors, data mining seems to be a promising technique in the field of nutritional epidemiology and deserves further examination.

Nutrition & Dietetics↗
DOE OSTI2025

Key Environmental and Ecological Variables of Wetland CH 4 and CO 2 Fluxes Change With Warming

Wetlands are important ecosystems for the global carbon cycle, impacting regional and global methane (CH 4 ) and carbon dioxide (CO 2 ) budgets. This study examines how environmental and ecological variables impact wetland CH 4 flux and net ecosystem exchange of CO 2 (NEE) across 17 sites globally. We also quantified the importance of variables for each wetland type and site at monthly scale under normal and warm temperatures using dominance analysis. We identified soil and air temperature (TS, TA, respectively) as key variables influencing wetland CH4, and latent heat (LE) and shortwave radiation (SW) for NEE under normal and warm conditions. However, the importance of some variables shifted with warming. For predicting the variability of wetland CH4 flux under warming, gross primary productivity (GPP) and LE, replacing wind direction (WD), were dominant variables for tropical swamps, while NEE was important for high-latitude fens and bogs under warm temperatures. For wetland NEE, the role of TA and TS decreased across all wetland types with warming, while vapor pressure deficit (VPD) became more important for mid and high-latitude wetlands. Our results reveal the complex responses of wetland carbon flux to environmental and ecological variables with warming and provide new insights into improving wetland models by incorporating additional variables and accounting for the changing roles of variables in carbon flux under warming.

54 ENVIRONMENTAL SCIENCES↗