SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This presentation covers an overview of Electric Vehicle (EV) and EV Supply Equipment (EVSE) deployment objectives in the Lao PDR, an introduction to EV and EVSE government and utility motivations, introduction to business models for EVSE in the Lao PDR.
This purpose of this work is to develop a power sector resilience action plan for the Lao PDR (resilience action plan). The resilience action plan provides strategies to address the key vulnerabilities identified in a previous vulnerability assessment.
This presentation is an overview of the technical standards governing electric vehicle supply equipment and was presented to support the development of the Lao PDR electric vehicle market.
LaO is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. La2+ is bonded to six equivalent O2- atoms to form a mixture of edge and corner-sharing LaO6 octahedra. The corner-sharing octahedral tilt angles are 0°. All La–O bond lengths are 2.58 Å. O2- is bonded to six equivalent La2+ atoms to form a mixture of edge and corner-sharing OLa6 octahedra. The corner-sharing octahedral tilt angles are 0°.
Presentation to be given at the FY 2020 SDRD Annual Meeting, to be held Sept. 23-24, on WebEx. Strategic Studies in Dynamic Material Response of Weapons-Relevant Materials, LAO-015-18, Year 3
Presentation to be given at the FY 2020 SDRD Annual Meeting, to be held Sept. 23-24, on WebEx. Detector Wall Research for Fast Gamma Signal Detection in NDSE Applications, LAO-026-20, Year 1
This webinar discusses the challenges around designing retail tariffs for personal use vehicles in public and at home.
Not Available
X-ray phase contrast imaging with transmission gratings for density profile measurements has been developed and tested for dynamic experimental applications. Talbot-Lau x-ray deflectometry is a new method of measuring x-ray refraction in addition to attenuation and ultrasmall-angle scattering that has recently been developed for static imaging, primarily for medical and industrial applications. To obtain density profiles from fast-evolving systems, we must use a flash x-ray source with a spot size much larger than the continuous microfocus sources of static imaging systems, and we can obtain only a single exposure. The challenges to measuring electron density profiles of two mixed elements from a single-image, low spatial resolution system are addressed, and initial results from the first dynamic experiments with one such system, conducted on a gas launcher at the end of FY 2018 and beginning of FY 2019, are presented. In FY 2019, we designed and built a new deflectometer designed for detonator experiments to test new techniques to improve the sensitivity and reliability of the diagnostic.
Presentation to be presented during the Site-Directed Research and Development (SDRD) FY 2021 review meeting (Webex), September 22–23, 2021.
Presentation to be presented during the Site-Directed Research and Development (SDRD) program FY 2021 review meeting (Webex), September 22–23, 2021.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Achieving multimodal luminescence within a single phosphor is vital for multifunctional applications but remains challenging due to complex color tuning and trap engineering. In this study, we report Pr 3+ and Gd 3+ co‐doped LaAlO 3 (LAO:PG) phosphors, designed through careful modulation of multilevel traps and Pr 3+ → Gd 3+ energy transfer dynamics. These materials exhibit diverse luminescence modes, including down‐conversion luminescence (DCL), up‐conversion luminescence (UCL), persistent luminescence (PersL), optically stimulated luminescence (OSL), and thermally stimulated luminescence (TSL) across a wide spectral range. Unlike previously studied Pr 3+ ‐doped LAO, the co‐doped LAO:PG shows DCL in both UV‐visible and NIR regions and displays ultraviolet‐C UCL under visible excitation. Notably, we observe, for the first time, PersL lasting several minutes in these phosphors—an improvement over the non‐PersL behavior of Pr 3+ ‐only doped LAO. Additionally, the LAO:PG phosphors exhibit strong OSL response. TSL analysis reveals five distinct trap levels linked to these properties. Density functional theory calculations further correlate intrinsic defects to these traps, supporting a proposed mechanism for the observed multimodal luminescence. These findings highlight LAO:PG as a promising platform for developing advanced phosphors with integrated luminescence modes, paving the way for future applications in data storage, phototherapy, and anti‐counterfeiting technologies.
The bonding and spectroscopic properties of LaX and AcX (X = O and F) diatomic molecules were studied by highlevel ab initio CCSD(T) and SO-CASPT2 electronic structure calculations. Bond dissociation energies (BDEs) were calculated at the Feller−Peterson−Dixon (FPD) level. Potential energy curves and spectroscopic constants for the lowest-lying spin−orbit Ω states were obtained at the SO-CASPT2/aQ-DK level. A dense manifold of excited states was described for the monofluorides with the ground states well separated from the excited states. The spectroscopic parameters were in good agreement with those reported experimentally for LaO and LaF. For the diatomic molecules containing actinides, no experimental data of these parameters was found, but the results were consistent with other high-level calculations. The BDEs calculated at the FPD level were 791.3 (LaO), 705.2 (AcO), 650.0 (LaF), and 678.6 (AcF) kJ/ mol. The NBO analysis showed that the monofluorides are essentially ionic, which explains why the BDE(AcF) is higher than BDE(LaF); for the monoxides, covalent contributions involving the d orbitals of the metal and the p orbitals of the oxygen are stronger for LaO than AcO, which explains the higher BDE for LaO. Finally, the bond orders are predicted to be 2 for LaF and AcF, 3 for AcO, and higher than 3 for LaO.
Abstract Oil has long been the dominant feedstock for producing fuels and chemicals, but coal, natural gas and biomass are increasingly explored alternatives 1–3 . Their conversion first generates syngas, a mixture of CO and H 2 , which is then processed further using Fischer–Tropsch (FT) chemistry. However, although commercial FT technology for fuel production is established, using it to access valuable chemicals remains challenging. A case in point is linear α-olefins (LAOs), which are important chemical intermediates obtained by ethylene oligomerization at present 4–8 . The commercial high-temperature FT process and the FT-to-olefin process under development at present both convert syngas directly to LAOs, but also generate much CO 2 waste that leads to a low carbon utilization efficiency 9–14 . The efficiency is further compromised by substantially fewer of the converted carbon atoms ending up as valuable C 5 –C 10 LAOs than are found in the C 2 –C 4 olefins that dominate the product mixtures 9–14 . Here we show that the use of the original phase-pure χ-iron carbide can minimize these syngas conversion problems: tailored and optimized for the process of FT to LAOs, this catalyst exhibits an activity at 290 °C that is 1–2 orders higher than dedicated FT-to-olefin catalysts can achieve above 320 °C (refs. 12–15 ), is stable for 200 h, and produces desired C 2 –C 10 LAOs and unwanted CO 2 with carbon-based selectivities of 51% and 9% under industrially relevant conditions. This higher catalytic performance, persisting over a wide temperature range (250–320 °C), demonstrates the potential of the system for developing a practically relevant technology.
The on-demand production of short-chain linear alpha olefins (LAOs; C4-C8) via C2H4 dimerization and oligomerization is industrially attractive, prompting extensive research on designing active, selective, and stable catalysts for industrial use. Cobalt supported on ammoniated carbon (Co(NH3)x/C) catalysts have shown remarkable activity and selectivity in this process. However, critical aspects such as the active phase, active site structure, the role of the catalyst support, cobalt loading effects, and the inverse correlation of the reaction rate with temperature remain inadequately understood. This study systematically explores these factors using a combination of steady-state differential catalytic tests, in situ molecular characterization including diffuse reflectance UV-Vis (DR-UV-Vis), Infrared, and Raman spectroscopies, and ex situ X-ray diffraction (XRD) and high annular aberration-corrected dark field transmission electron microscopy (HAADF-STEM). Various supports (SiO2, Al2O3, NH4-ZSM-5, g-C3N4, and C) and cobalt loadings (1.0-3.0 Co nm-2) were studied to determine the optimal catalyst composition and identify the active phase and sites. Carbon-supported catalysts uniquely produce C4-8 LAOs during C2H4 dimerization, with site-time-yield remaining constant (~10-3 s-1) for 1.0-4.0 Co nm-2 at prolonged reaction times (24-48?h time-on-stream). At higher loadings of 6.0 Co nm-2, the formation of crystalline CoO and Co3O4 phases reduces catalytic activity and LAO selectivity. Our findings show that active catalysts lack crystalline cobalt oxides and instead feature dispersed Co2+ sites, tetra-coordinated to a mix of N/NH3 and O/H2O ligands, which catalyze C2H4 dimerization via the Cossee-Arlman mechanism, exhibiting 1st order dependence on C2H4 concentration. The observed inverse rate-temperature correlation is attributed to compensation effects (i.e., presence of Cremer-Constable relationship) linked to changes in adsorption enthalpic and entropic factors.
The high-mobility conducting interface (CI) between LaAlO 3 (LAO) and SrTiO 3 (STO) has revealed many fascinating phenomena, including exotic magnetism and superconductivity. But, the formation mechanism of the CI has not been conclusively explained. Here, using in situ angle-resolved photoemission spectroscopy, we elucidated the mechanisms for the CI formation. In as-grown samples, we observed a built-in potential (V bi ) proportional to the polar LAO thickness starting from the first unit cell (UC) with CI formation appearing above 3 UCs. However, we found that the V bi is removed by synchrotron ultraviolet (UV)-irradiation; The built-in potential is recovered by oxygen gas (O 2 (g))-exposure. Furthermore, after UV-irradiation, the CI appears even below 3UC of LAO. Here, our results demonstrate not only the V bi -driven CI formation in as-grown LAO/STO, but also a new route to control of the interface state by UV lithographic patterning or other surface modification.