Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LaNi”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Electrochemical Studies on LaNi(sub 5-x)Sn(sub x) Metal Hydride Alloys

Electrochemical studies were performed on LaNi(sub 5-x)Sn(sub x) with 0(less than or equal to)x(less than or equal to)0.5. We measured the effect of the Sn substituent on the kinetics of charge transfer and diffusion during hydrogen absorption and desorption, and the cyclic lifetimes of LaNi(sub 5-x)Sn(sub x) electrodes in 250 mAh laboratory test cells. We report beneficial effects of making small substitutions of Sn for Ni in LaNi(sub 5) on the performance of metal hydride alloy anode in terms of cyclic lifetime, capacity and kinetics. The optimal concentration of Sn in LaNi(sub 5-x)Sn(sub x) alloys for negative electrodes in alkaline rechargable secondary cells was found to lie in the range 0.25(less than or equal to)x(less than or equal to)0.3.

metal hydride alloys hydrogen absorption↗
NASA NTRS1996

Electrochemical Evaluation of LaNi(sub 5-x)Ge(sub x) Metal Hydride Alloys

We report a detailed evaluation of Ge-substituted LaNi(sub 5) for electrochemical application as a negative electrode inalkaline rechargeable cells. Alloys with small substitutions of Ge for Ni show operating pressures, chargeability, cyclic lifetime, and kinetics for hydrogen absorption and desorption all superior to those found in many substituted LaNi(sub 5) alloys.

alkaline cells recharchable cells rechargeable bat↗
NASA NTRS1996

Kinetics of Hydrogen Diffusion in LaNi(sub 5-x)Sn(sub x) Alloys

Solid-state diffusion of hydrogen in metal hydride (MH) alloys is recognized as the rate determining step in the discharge of MH alloys in alkaline Ni-MH rechargeable cells. In our pursuit of new ternary solutes in LaNi(sub 5) for extended cycle lifetimes, we have observed noticeable improvement in the cycle life with small substitutions of Sn and Ge for Ni. Furthermore, these substituents also facilitate enhanced charge transfer kinetics for hydriding-dehydriding process. In this paper, we report our studies on the kinetics of hydrogen diffusion in LaNi(sub 5-x) Sn(sub x) alloys by electrochemical pulse techniques, chronoamperometry and chronocoulometry.

electrochemical cycling↗
NASA NTRS1985

Moessbauer studies on LaNi(4.7)Sn(0.3) and its hydride

Moessbauer measurements were made on LaNi(4.7)Sn(0.3) at room and liquid nitrogen temperatures. Experimental data yielded a singlet at room temperature and a doublet at liquid-nitrogen temperature. Spectra of the hydrided sample yielded a doublet at liquid-nitrogen temperature with an increase in the quadrupole splitting compared to the unhydrided spectra, but no change in the isomer shift. These data indicate that there is no significant interaction between the tin and the hydrogen. The magnetic character remained the same down to liquid-nitrogen temperature as evidenced by the Moessbauer data. X-ray diffraction measurements on the hydride showed an expanded lattice with the same structure as found for the unhydrided sample. A decrease in particle size was observed upon hydriding.

Oliver, F. W.↗
NASA NTRS1997

Electrochemical Properties of LaNi (sub 5-x) Ge (sub x) Alloys in Ni-MH Batteries

Electrochemical studies were performed on LaNi (sub 5-x) Ge (sub x) metal hydride alloys with 0 <= x <= 0.5. We carried out single-electrode studies to understand the effects of the Ge substituent on the hydrogen absorption characteristics, the electrochemical capacity, and the electrochemical kinetics of hydrogen absorption and desorption.

hydrogen absorption electrochemical capacity elect↗
NASA NTRS2000

Degradation behavior of LaNi(sub 4.87)Sn(sub 0.22)H(sub x) at elevated temperature

Partial substitution of tin for nickel in the LaNi(sub 5) alloy greatly enhances the stability and durability of the hydride phase during both gas phase and electrochemical cycling. Effects observed included reduction in hydrogen storage capacity, decreases in the plateau pressures, increased slopes of the plateaus, and smaller hysteresis ratios.

metal hydrides hydrogen storage↗
NASA NTRS1993

(abstract) Development of Sorbent Bed Assembly for a Periodic 10K Solid Hydrogen Cryocooler

A closed-cycle 10K sorption cryocooler is being fabricated for microgravity testing during a future space shuttle mission. A critical component of this cryogenic refrigerator is the metal hydride sorbent bed assembly (SBA). The SBA uses hydrides which absorb hydrogen gas at low pressure, (i.e., about 0.25 MPa from liquid hydrogen at 25K and below 0.2 kPa from solid hydrogen near 10K) and subsequently delivers hydrogen at nearly 10 MPa to a storage reservoir to repeat the Joule-Thomson (J-T) expansion process. The SBA includes three independent hydride beds where two contain LaNi(sub 4.8)Sn(sub 0.2) alloy and the third ZrNi. Detailed descriptions will be given for the three beds, which have specialized design features to enhance performance at each step of operation. In particular, two beds must rapidly absorb hydrogen in order for the J-T cold stage to reach 10K within two minutes from a 65K holding temperature. Performance characterization results will be compared to model analyses of the SBA.

applications microgravity↗
NASA NTRS2000

Degradation behavior at elevated temperature of LaNisub5-xSnsubxHsubz for x between 0.20 and 0.25

Systematic studies of the hydriding behavior of LaNi(sub 5-x)Sn(sub x)H(sub z) alloys with tin contents in the range between 0.20 and 0.25 have revealed changes in the pressure-composition-temperature (PCT) isotherms measured after heating the hydrides above 450 K. These changes are indications of degradation processes and increased disorder within the alloy structure.

metal hydrides gas gap heat switches hydrogen stor↗
NASA NTRS1987

Effects of exercise and conditioning on clotting and fibrinolytic activity in men

Blood clotting and fibrinolytic activity in three groups of nonsmoking, nonobese, healthy men ranging from 19 to 59 years are studied. The groups consisted of (1) marathoners (men running more than 50 miles/week); (2) joggers (men running 5-15 miles/week; and (3) sedentary subjects (men who did not exercise routinely). It is observed that the rate of blood clotting is accelerated by exercise; marathoners had greater increases in fibrinolytic activity than the other two groups; and fibrin degradation products increased with exercise. The data reveal that the changes in clotting assays with exercise do not correlate with changes in whole blood lactate, blood pyruvate, or rectal temperatures. It is noted that the level of acceleration for fibrinolytic activity is directly related to the maximum aerobic capacity and work load of the individual, and that conditioning enhances the fibrinolytic response to exercise.

Ferguson, Earl W.↗