Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LaCl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Thallium-based scintillators for high-resolution gamma-ray spectroscopy: Ce 3+ - doped Tl 2 LaCl 5 and Tl 2 LaBr 5

In this paper we report on the crystallographic and scintillation properties of Tl 2 LaCl 5 :Ce 3 + and Tl 2 LaBr 5 :Ce 3 + , two novel thallium-containing high-resolution scintillators for gamma-ray spectroscopy. Crystals of Tl 2 LaCl 5 :Ce 3 + and Tl 2 LaBr 5 :Ce 3 + were grown by the Vertical Bridgman method up to 1-inch diameter and 1-inch long. Single crystals of Tl 2 LaCl 5 :Ce 3 + and Tl 2 LaBr 5 :Ce 3 + belong to the orthorhombic system with space group 62 and have a density of 5.16 and 5.98 g/cm 3 , respectively. The scintillators show high light yields of up to 68,000 photons/MeV, excellent gamma-ray energy resolution of ≤ 3% at 662 keV, a fast scintillation decay, and a proportional response over a wide range of energies from 32 keV up to 1275 keV. Density Functional Theory calculations show that the Ce 3 + energy levels are inside the bandgap despite the smaller bandgap of Tl 2 LaCl 5 and Tl 2 LaBr 5 compared to K 2 LaCl 5 and K 2 LaBr 5 . Finally, a systematic Ce 3 + concentration study was performed for Tl 2 LaCl 5 :Ce 3 + and trends observed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Determination and Comparison of Parameters from Cyclic Voltammetry of LaCl 3 in Eutectic LiCl-KCl

Electrochemical measurements of LaCl 3 were obtained in eutectic LiCl-KCl at 773 K. Cyclic voltammetry data were acquired using a tungsten electrode LaCl 3 amounts in the molten salt in the range of 0.5 to 3.0 wt%. Both cyclic voltammetry and Tafel analyses of the data resulted in calculation of values for the charge transfer coefficient (0.262), diffusion coefficient (1.67 × 10 -5 cm 2 s -1 ), exchange current density (0.0148 to 0.0473 A cm -2 ), and charge transfer resistance (0.404 to 1.99 Ω) related to lanthanum ions in the molten salt. Calculated values were compared to those available in the literature. The values of parameters found in literature varied significantly in comparison to those in the present study due to dissimilar experimental conditions, e.g., electrode material, temperature, and LaCl 3 concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Materials Data on LaCl by Materials Project

LaCl crystallizes in the trigonal R-3m space group. The structure is two-dimensional and consists of six LaCl sheets oriented in the (0, 0, 1) direction. La is bonded in a distorted T-shaped geometry to three equivalent Cl atoms. All La–Cl bond lengths are 2.93 Å. Cl is bonded in a distorted T-shaped geometry to three equivalent La atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fast-neutron response of LaBr 3 (Ce) and LaCl 3 (Ce) scintillators

The response of LaBr 3 (Ce) and LaCl 3 (Ce) scintillators to fast neutrons is investigated. Neutron-induced charged-particle reactions are observed in both materials when exposed to the fast neutrons produced by an AmBe source, with pulse-shape discrimination used to separate channels. LaBr 3 (Ce) is found to have the best separation between reaction channels, while LaCl 3 (Ce) has a significantly higher efficiency.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

LaCl 3 -based sodium halide solid electrolytes with high ionic conductivity for all-solid-state batteries

To enable high performance of all solid-state batteries, a catholyte should demonstrate high ionic conductivity, good compressibility and oxidative stability. Here, a LaCl 3 -based Na + superionic conductor (Na 1–x Zr x La 1–x Cl 4 ) with high ionic conductivity of 2.9 × 10 –4 S cm –1 (30 °C), good compressibility and high oxidative potential (3.80 V vs. Na 2 Sn) is prepared via solid state reaction combining mechanochemical method. X-ray diffraction reveals a hexagonal structure (P6 3 /m) of Na 1–x Zr x La 1–x Cl 4 , with Na + ions forming a one-dimensional diffusion channel along the c-axis. First-principle calculations combining with X-ray absorption fine structure characterization etc. reveal that the ionic conductivity of Na 1–x Zr x La 1–x Cl 4 is mainly determined by the size of Na + -channels and the Na + /La 3+ mixing in the one-dimensional diffusion channels. When applied as a catholyte, the NaCrO 2 ||Na 0.7 Zr 0.3 La 0.7 Cl 4 ||Na 3 PS 4 ||Na 2 Sn all-solid-state batteries demonstrate an initial capacity of 114 mA h g –1 and 88% retention after 70 cycles at 0.3 C. In addition, a high capacity of 94 mA h g –1 can be maintained at 1 C current density.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of Metal Chloride Impurities on Equilibrium Potential of Fe/FeCl 2 in Eutectic LiCl-KCl

In this study, interaction of dilute metal chloride solutes in molten eutectic LiCl-KCl was studied via equilibrium potential measurements. Open circuit potential (OCP) was measured between a pure iron rod and a Ag/AgCl reference electrode with concentration of FeCl 2 varying from 0.2–1 mol% at 530 °C. The Nernst equation was used to calculate activity coefficient of FeCl 2 based on OCP. Measurements were made in LiCl-KCl-FeCl 2 with and without additions of 0.5 mol% CsCl, NaCl, and LaCl 3 . The activity coefficient of FeCl 2 was found to be unaffected by these small concentrations of CsCl, LaCl 3 , and NaCl. However, there was observed evidence that the activity coefficient of FeCl 2 , above 0.8 mol% Fe, may be affected by the presence of LaCl 3 at higher concentrations beginning around 0.5 mol% La. Over the full range of conditions tested, the activity coefficient of FeCl 2 in molten LiCl-KCl ranged from 2.95 × 10 −5 to 1.01 × 10 −4 .

Electrochemistry↗
DOE OSTI2023

Trimethyltriazacyclohexane coordination chemistry of simple rare-earth metal salts

Reactions of 1,3,5-trimethyl-triazacyclohexane (Me 3 tach) with common rare-earth metal iodide, chloride, and triflate salts were examined to determine the capacity of this inexpensive chelate to provide alternative precursors for THF-free reactions. The reaction of LaI 3 (THF) 4 and CeI 3 (THF) 4 with 1,3,5-trimethyl-triazacyclohexane in THF generated toluene soluble (Me 3 tach) 2 LnI 3 , 1-Ln , in which the Ln center has a tri-capped trigonal prismatic geometry with two eclipsed Me 3 tach rings. Reaction with NdI 3 (THF) 3.5 forms the analogous 1-Nd , but a different structure with one outer sphere iodide, [(Me 3 tach) 2 NdI 2 ][I], 2-Nd , is also accessible and has a structure reminiscent of bent metallocenes. The reaction of LaCl 3 and Me 3 tach forms the less soluble (Me 3 tach) 2 LaCl 3 , which has a structure analogous to 1-Ln with eclipsed Me 3 tach rings. The mono-ring yttrium complex, (Me 3 tach)YCl 3 (THF) 2 , could be isolated from the reaction of YCl 3 with Me 3 tach. Reactions of La(OTf) 3 with Me 3 tach were sensitive to the presence of residual proton sources as exemplified by the isolation of {[(Me 3 tach)La(μ-OH)(μ-OTf)] 2 (μ-OTf) 2 } 2 , 5-La , and [HMe 3 tach][(Me 3 tach) 2 La-(OTf) 4 ], 6-La . SmI 2 reacts with Me 3 tach to produce the Sm( II ) complex, (Me 3 tach) 2 SmI 2 (THF), 7-Sm , but 2-Sm can also form in this reaction. Complexes of the larger 1,4,7-trimethyltriazacyclononane (Me 3 tacn) ligand, namely (Me 3 tacn)LaI 3 (THF), (Me 3 tacn)YCl 3 , and (Me 3 tacn)SmI 2 (THF) were synthesized for comparison. Several examples of the protonated ligands with simple counteranions, [HMe 3 tach][X] (X = Cl, Br, I) and [HMe 3 tacn][OTf], were identified in the course of these studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Towards a new generation of solid total-energy detectors for neutron-capture time-of-flight experiments with intense neutron beams

Challenging neutron-capture cross-section measurements of small cross sections and samples with a very limited number of atoms require high-flux time-of-flight facilities. In turn, such facilities need innovative detection setups that are fast, have low sensitivity to neutrons, can quickly recover from the so-called γ-flash, and offer the highest possible detection sensitivity. In this paper, we present several steps towards such advanced systems. Specifically, we describe the performance of a high-sensitivity experimental setup at CERN n_TOF EAR2. It consists of nine sTED detector modules in a compact cylindrical configuration, two conventional used large-volume C 6 D 6 detectors, and one LaCl 3 (Ce) detector. The performance of these detection systems is compared using 93 Nb(n, γ) data. We also developed a detailed G EANT small4 Monte Carlo model of the experimental EAR2 setup, which allows for a better understanding of the detector features, including their efficiency determination. This Monte Carlo model has been used for further optimization, thus leading to a new conceptual design of a γ detector array, STAR, based on a deuterated-stilbene crystal array. Finally, the suitability of deuterated-stilbene crystals for the future STAR array is investigated experimentally utilizing a small stilbene-d12 prototype. The results suggest a similar or superior performance of STAR with respect to other setups based on liquid-scintillators, and allow for additional features such as neutron-gamma discrimination and a higher level of customization capability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Organic Acid-Assisted Thermal Dehalogenation of Halide Salt Nuclear Wastes: From Waste Salts to Borosilicate Glass

Only a handful of high-halide salt waste forms have been demonstrated for vitrification-based immobilization strategies for halide-salt nuclear waste streams (e.g., pyroprocessing wastes, molten salt reactor wastes) and they all have low waste loading potential and most have low chemical durabilities for high-alkali streams. An alternative approach to direct salt immobilization is salt partitioning prior to waste form fabrication and one option for partitioning is halide removal (called dehalogenation). Removing the halogen fraction through dehalogenation can significantly reduce the waste volume required for disposal in the primary waste form. Furthermore, when dehalogenation is performed using organic acids, the dehalogenation reagent can decompose during high-temperature vitrification, reducing waste loading limitations in the waste form. In the current work, different organic acids (i.e., oxalic, formic, acetic, oxamic, and citric) were evaluated for dehalogenation efficiency of a simple chloride salt simulant (7.19% LaCl 3 , 53.77% LiCl, and 39.04% KCl, by mole) and a more complex chloride salt simulant called ERV3 (electrorefiner version 3) at 150 °C–300 °C and using H + /Cl – molar ratios of 1:1, 2:1, and 3:1. Additionally, a borosilicate glass waste form called TARS (or the average of refined specifications) was formulated, produced, and characterized for dehalogenated ERV3.

Amorphous materials↗
DOE OSTI2023

Machine Learning Automated Analysis of Enormous Synchrotron X-ray Diffraction Datasets

X-ray diffraction (XRD) data analysis can be a time-consuming and laborious task. Deep neural network (DNN) based models trained with synthetic XRD patterns have been proven to be a highly efficient, accurate, and automated method for analyzing common XRD data collected from solid samples in ambient environments. However, it remains unclear whether synthetic XRD-based models can be effective in solving micro(μ)-XRD mapping data for in situ experiments involving liquid phases, which always have lower quality and significant artifacts. In this study, we collected μ-XRD mapping data from a LaCl 3 -calcite hydrothermal fluid system and trained two categories of models to analyze the experimental XRD patterns. Here, the models trained solely with synthetic XRD patterns showed low accuracy (as low as 64%) when solving experimental μ-XRD mapping data. However, the accuracy of the DNN models significantly improved (90% or above) when we trained them with a data set containing both synthetic and a small number of labeled experimental μ-XRD patterns. This study highlights the importance of labeled experimental patterns in training DNN models to solve μ-XRD mapping data from in situ experiments involving liquid phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

La 3+ Networks and Speciation in the Molten State: Impact of Spacer Salt Selection on Structural Heterogeneity

We recently introduced the concept of a “spacer salt” that creates structural heterogeneity and intermediate range order. Put simply, a fully networked salt melt, such as LaCl 3 or UCl 3 , becomes disrupted by the introduction of ions that do not participate in the network. One of the results of this disruption is the experimental observation of two characteristic distances between the multivalent cations: the shorter “in-network” distance and the longer “across-network” distance spaced by the lowvalency salt. The longer characteristic distance, absent if there is no spacer salt, is the culprit for a new first sharp diffraction peak in scattering experiments. Intuitively, it would appear to follow from this analysis that higher concentrations of the lower-valency salt would further separate multivalent cations, resulting in a shift to lower q values of this first sharp diffraction peak. We will show experimentally and computationally that this is not always the case because multiple other factors enter into play.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A hybrid calorimetry-simulation model of mixing enthalpy for molten salt

Calorimetric determination of enthalpies of mixing (ΔH mix ) in multicomponent molten salts is often interpreted using empirical models that lack physically meaningful parameters. However, for improving pyrochemical separation of spent nuclear fuel, where lanthanides are major fission products and critical elements, a deeper thermodynamic understanding of the link between excess thermodynamic properties and solvation structure is critically needed. In this work, we implement a hybrid and physics-informed framework, MIVM+Calorimetry+AIMD, which integrates experimentally measured ΔH mix (via high temperature drop calorimetry) with solvation structures from ab initio molecular dynamics (AIMD). This approach is demonstrated using LaCl 3 mixed with eutectic LiCl-KCl (58 mol% – 42 mol%) at 873 K and 1133 K. MIVM-derived parameters enable extrapolation of excess Gibbs energy and La 3+ activity across compositions. In contrast, direct ΔH mix predictions from AIMD and polarizable ion model simulations deviate significantly. By incorporating experimentally benchmarked solvation structures into an interpretable thermodynamic model, the MIVM+Calorimetry+AIMD formalism achieves higher accuracy and generalizable method for studying molten salts, offering a robust path for understanding and optimizing molten salt chemistry relevant to nuclear fuel cycles and separation science.

Goncharov, Vitaliy G. [Washington State Univ., Pul↗
DOE OSTI2021

Temperature and salt controlled tuning of protein clusters

The formation of molecular assemblies in protein solutions is of strong interest both from a fundamental viewpoint and for biomedical applications. While ordered and desired protein assemblies are indispensable for some biological functions, undesired protein condensation can induce serious diseases. As a common cofactor, the presence of salt ions is essential for some biological processes involving proteins, and in aqueous suspensions of proteins can also give rise to complex phase diagrams including homogeneous solutions, large aggregates, and dissolution regimes. Here, we systematically study the cluster formation approaching the phase separation in aqueous solutions of the globular protein BSA as a function of temperature (T), the protein concentration (c p ) and the concentrations of the trivalent salts YCl 3 and LaCl 3 (c s ). As an important complement to structural, i.e. time-averaged, techniques we employ a dynamical technique that can detect clusters even when they are transient on the order of a few nanoseconds. By employing incoherent neutron spectroscopy, we unambiguously determine the short-time self-diffusion of the protein clusters depending on c p , c s and T. We determine the cluster size in terms of effective hydrodynamic radii as manifested by the cluster center-of-mass diffusion coefficients D. For both salts, we find a simple functional form D(c p , c s , T) in the parameter range explored. The calculated inter-particle attraction strength, determined from the microscopic and short-time diffusive properties of the samples, increases with salt concentration and temperature in the regime investigated and can be linked to the macroscopic behavior of the samples.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Investigating trends in actinide covalency and magnetism with 35/37 Cl SSNMR spectroscopy and first-principles calculations

Solid-state NMR (SSNMR) spectroscopy is a powerful technique for studying actinide chemistry but has been significantly limited due to the complex paramagnetism, and radiological hazards presented by these materials. Lanthanide and actinide salts often feature magnetic ordering and can be paramagnetic, ferromagnetic, or antiferromagnetic depending on temperature and electronic structure. Paramagnetic interactions can manifest in SSNMR both as secular spectral shifts and/or couplings as well as contributions from non-secular relaxation. Both effects can be directly measured with NMR and used to extrapolate rich chemical information such as coordination environments, bonding characteristics, local molecular dynamics, and correlation times. Typically, these studies are carried out on high-γ and highly abundant NMR-active isotopes (e.g., 1 H, 6/7 Li, 19 F, 23 Na, etc.) or on enriched rare isotopes (e.g., 2 H and 17 O), which can be expensive. Herein, we present a facile methodology to measure the 35/37 Cl electric-field gradient (EFG) and paramagnetic shift anisotropy (SA) tensor components using static wideline SSNMR measurements of LaCl 3 , NdCl 3 , UCl 3 , and UCl 4 . The static powder spectra were measured with both 35 Cl and 37 Cl SSNMR to increase the fidelity of the extracted tensor parameters. Variable temperature NMR of a select case confirms the Curie–Weiss paramagnetism. Relaxation measurements of both nuclei further corroborate observations owing to the paramagnetic relaxation enhancement and reveal simultaneous quadrupolar relaxation mechanisms. Density functional theory (DFT) calculations using Hubbard U corrections to the uranium valence orbitals show excellent agreement with experimental EFG tensor parameters and help describe the bonding characteristics in these lanthanide and actinide systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Study of Potentiometry for Monitoring Activity of GdCl 3 in Molten LiCl-KCl Salt

In pyroprocessing spent nuclear fuels by electrorefining in molten LiCl-KCl salt, it is desired to monitor in real time the UCl 3 concentration in the salt for safeguards purposes. Current chemical analysis of the highly radioactive salt for electrorefining by an inductively coupled plasma technique is inconvenient and usually time-consuming in generating the salt composition results. In this paper, we evaluated whether a simple potentiometry approach can be used for real-time monitoring the concentration of GdCl 3 , which was used as a surrogate for UCl 3 , in LiCl-KCl-GdCl 3 salt by measuring the open circuit potential of a Gd metal electrode with respect to a Ag/AgCl reference electrode (RE) when GdCl 3 salt was incrementally added to the LiCl-KCl salt. Additions of LaCl 3 , CeCl 3 and NdCl 3 salts were used for evaluating the effects of other chloride salts on the selectivity of the Gd metal electrode vs Ag/AgCl RE. While using potentiometry to determine GdCl 3 concentrations, Gd metal was unexpectedly observed to be unstable and dissolved in LiCl-KCl salt when GdCl 3 is present.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Development of In-Situ Chlorine Generator for Metal Purification (End of Contract Report)

It has been demonstrated that rare-earth and actinide metals can be purified via conversion to chlorides and heating to volatilize impurities. To this end, BYU has been working towards designing, building, and testing a system that incorporates the chlorine gas generation method into the chloride volatility process. The efforts made towards the project tasks listed in the Statement of Work are addressed in the following sections. Finally, a report on information related to this project that has been published or presented is addressed. By the end of the contract period, small-scale tests using LaCl 3 -CaCl 2 to generate Cl 2 had been conducted, the produced Cl 2 was successfully reacted with Ce foil to create CeCl 3 , initial designs for the large-scale apparatus were completed, and manufacturing for the large-scale apparatus had begun.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗