Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LITHIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Electron Microprobe Analyses of Lithic Fragments and Their Minerals from Luna 20 Fines

The bulk analyses (determined with the broad beam electron microprobe technique) of lithic fragments are given in weight percentages and are arranged according to the rock classification. Within each rock group the analyses are arranged in order of increasing FeO content. Thin section and lithic fragment numbers are given at the top of each column of analysis and correspond to the numbers recorded on photo mosaics on file in the Institute of Meteoritics. CIPW molecular norms are given for each analysis. Electron microprobe mineral analyses (given in oxide weight percentages), structural formulae and molecular end member values are presented for plagioclase, olivine, pyroxene and K-feldspar. The minerals are selected mostly from lithic fragments that were also analyzed for bulk composition. Within each mineral group the analyses are presented according to the section number and lithic fragment number. Within each lithic fragment the mineral analyses are arranged as follows: Plagioclase in order of increasing CaO; olivine and pyroexene in order of increasing FeO; and K-feldspar in order of increasing K2O. The mineral grains are identified at the top of each column of analysis by grain number and lithic fragment number.

Conrad, G. H.↗

Lithic fragments, glasses and chondrules from Luna 16 fines.

Electron probe determination of the bulk compositions of igneous and microbreccia lithic fragments, glasses and chondrules from Luna 16 fines and of the compositions of minerals in basaltic lithic fragments. It is found that the Luna 16 fines have a composition more similar to that of Apollo 11 than to those of Apollo 12 and 14 materials. The compositions of lithic fragments, glasses and chondrules from Luna 16 core tube layers A and D are similar. The glasses are compositional analogs of the lithic fragments and are produced largely from igneous rocks. The Luna 16 chondrules have an anorthositic-noritic-troctolitic composition. Evidence for the presence of ferric iron and water-bearing minerals in the Luna 16 material is not obtained. The occurrence of a great variety of igneous rocks in the material confirms an earlier conclusion that large-scale melting or partial melting to a considerable depth and an extensive igneous differentiation must have occurred on the moon.

Keil, K.↗

Classification, distribution, and origin of lithic fragments from the Hadley-Apennine region

The mineralogy and petrology of sixteen Apollo 15 soil samples from six stations are described together with the mineralogy, petrology, and chemistry of nineteen 4 to 10 mm basaltic lithic particles from nine stations. The lithic samples are classified, and relative abundances of the various rock types in the different samples are determined. The data are used to discuss the origin of the lithic types and their distribution according to selenological terranes. Population studies on particles in the 0.5 to 4 mm size range reveal systematic differences among three selenological terranes corresponding to the Appenine Front, the Mare/Rille, and the ridge or ray locations.

Powell, B. N.↗

Derivation of a heterogeneous lithic fragment in the Bovedy L-group chondrite from impact-melted porphyritic chondrules

Results are presented of petrographic, compositional and dating analyses of a light-colored lithic fragment in the L-group Bovedy meteorite that has a composition different from that of the host chondrite. Polished thin sections of the lithic fragment, host, and the fragment-host boundary were examined microscopically and analyzed by electron microprobe, metallic Ni-Fe, and instrumental neutron activation techniques; chips of the fragment were also used for Ar-39/Ar-40 dating and oxygen isotope analyses. The poikilitic textures, olivine, low-Ca pyroxene and kamacite composition and low Na2O, K2O and P2O5 contents of the fragment indicate that it represents a solidified, slightly fractionated impact melt formed from a source rich in porphyritic chondrules. A progressive increase on MgO content across the fragment is accounted for by the heterogeneous nucleation of MgO-rich phases. The Ar data indicate that the Bovedy lithic fragment and its host were partly degassed of radiogenic Ar less than 0.94 billion years ago, probably due to shock. The data are consistent with a cooling rate of about 5 C/million years through 500 C, which must have resulted from the burial of the assemblage beneath insulating material on the parent body at depths of at least several km.

Rubin, A. E.↗

Identification of New Lithic Clasts in Lunar Breccia 14305 by Micro-CT and Micro-XRF Analysis

From 1969 to 1972, Apollo astronauts collected 382 kg of rocks, soils, and core samples from six locations on the surface of the Moon. The samples were initially characterized, largely by binocular examination, in a custom-built facility at Johnson Space Center (JSC), and the samples have been curated at JSC ever since. Despite over 40 years of study, demand for samples remains high (~500 subsamples per year are allocated to scientists around the world), particularly for plutonic (e.g., anorthosites, norites, etc.) and evolved (e.g., granites, KREEP basalts) lithologies. The reason for the prolonged interest is that as new scientists and new techniques examine the samples, our understanding of how the Moon, Earth, and other inner Solar System bodies formed and evolved continues to grow. Scientists continually clamor for new samples to test their emerging hypotheses. Although all of the large Apollo samples that are igneous rocks have been classified, many Apollo samples are complex polymict breccias that have previously yielded large (cm-sized) igneous clasts. In this work we present the initial efforts to use the non-destructive techniques of micro-computed tomography (micro-CT) and micro x-ray fluorescence (micro-XRF) to identify large lithic clasts in Apollo 14 polymict breccia sample 14305. The sample in this study is 14305,483, a 150 g slab of regolith breccia 14305 measuring 10x6x2 cm (Figure 1a). The sample was scanned at the University of Texas High-Resolution X-ray CT Facility on an Xradia MicroXCT scanner. Two adjacent overlapping volumes were acquired at 49.2 micrometer resolution and stitched together, resulting in 1766 slices. Each volume was acquired at 100 kV accelerating voltage and 98 mA beam current with a 1 mm CaF2 filter, with 2161 views gathered over 360deg at 3 seconds acquisition time per view. Micro-XRF analyses were done at Washington University in St. Louis, Missouri on an EDAX Orbis PC micro-XRF instrument. Multiple scans were made at 40 kV accelerating voltage, 800 mA beam current, 30 μm beam diameter, and a beam spacing of 30-120 micrometer. The micro-CT scan of 14305,483 (Figure 2) was able to identify several large lithic clasts (approx. 1 cm) within the interior of the slab. These clasts will be exposed by band-sawing or chipping of the slab, and their composition more fully characterized by subsequent micro-XRF analysis. In addition to lithic clasts, the micro-CT scans identified numerous mineral clasts, including many FeNi metal grains, as well as the prominent fractures within the slab. The micro-XRF analyses (Figure 1b,c) of the slab surfaces revealed the bulk chemical compositions (qualitative) of the different clast types observed. In particular, by looking at the ratios of major elements (e.g. Ca:Mg:Fe), differences among the many observed clast types are readily observed. Moreover, several clasts not apparent to the naked eye were revealed in the K:Al:Si ratio map. The scans are also able to identify small grains of Zr- and P-rich minerals (not shown), which could in turn yield important age dates for the samples.

Zeigler, Ryan A.↗

Preliminary Experimental Investigation of Multi-Shock Shield Performance Against Meteoritic Other Lithic Projectiles

The protection capabilities of micrometeoroid and orbital debris (MMOD) shields are invariably linked to the physical properties of the impactor. Regardless of the shield type, or bumper material employed, the general principles of purposefully designed multi-walled MMOD protection relies on the ability to disrupt, shock, melt, and/or vaporize the projectile before it interacts with a critical spacecraft component. Here, we begin to study the influence of projectile heterogeneity on the performance of multi-shock shields by conducting hypervelocity impact tests using meteorite and a variety of other rock-like (i.e., lithic) materials. Testing was conducted using a .17 caliber two-stage light-gas gun, launching cylindrical lithic projectiles between 5.66 and 7.06 km/s. Shield layups included three layers of Nextel and one layer of graphite composite as a rear wall, with each layer having a 35 mm standoff. After testing a comparison of rear wall and witness plate damage was made to separate tests conducted using spherical Al projectiles of similar mass. It was observed that the more heterogenous meteorite projectile gave rise to notably more damage to the witness plate than an Al projectile of equivalent mass, while the other, more homogeneous lithic projectiles, did not.

meteorite↗

Petrology of some lithic fragments from Luna 20.

Microscopic and electron microprobe studies were made of polished thin sections of part of a 30-mg sample of 250- to 500-micron lunar soil returned by Luna 20 from a point between Mare Fecunditatis and Mare Crisium. Very fine-grained lithic (crystalline) rock fragments, composing about one-fifth of the total sample, have mineralogical compositions equivalent to various types of gabbro, anorthositic gabbro, gabbroic anorthosite, and troctolite, with minor basalt. The textures now observed in these fragments are in large part metamorphic. Twenty-seven electron microprobe analyses of minerals from these fragments are presented, including olivine, plagioclase, pyroxene, spinel, nickel-iron, and a Zr-Ti-REE mineral possibly similar to 'phase B' of Lovering and Wark (1971). Analyses of seven melt inclusions and 28 defocused beam analyses of lithic fragments are also given. Some of the fragments contain 'gas' inclusions which, along with the fine grain size, are believed to indicate final crystallization under low pressure near surface conditions.

Roedder, E.↗

Chemistry and petrology of Luna 24 lithic fragments and less than 250-micron soils - Constraints on the origin of VLT mare basalts

Results are reported on a combined INAA-petrologic study of 17 small (0.2-1.5 mg) Luna 24 lithic and mineral fragments and INAA study of 5 bulk soils and mineral separates from gabbro 24170. Lithic and mineral fragments are classified into VLT mare basalts (ferrobasalt and metabasalts), low-Ti, variolitic mare basalt, gabbros, melt rock and soil breccia. Data indicate 5 possible magma types, represented by: (1) VLT ferrobasalt and gabbro fragments, with low-TiO2 (about 1%), slightly bow-shaped REE pattern, and low REE concentrations (5-10X chondritic); (2) a ferrobasalt (Laul et al., 1978) and metabasalt fragments with major and trace element contents similar to (1), but positive Eu anomalies; (3) one gabbro fragment with distinctive pyroxene compositional trend (increasing Ti with nearly constant Fe/Fe + Mg) and highest REE contents of any Luna 24 mare basaltic sample, (4) a gabbro fragment with considerably less V and Cr2O3 than ferrobasalt and metabasalt fragments; and (5) variolitic basalt fragment with higher Ti2(2.3%) than other Luna 24 basalts and pyroxene that has increasing then decreasing Ti with increasing Fe/Fe + Mg. Trace element data place constraints on the nature of the source region and possible parent magmas for the Luna 24 VLT ferrobasalt.

Ma, M.-S.↗

Petrographic and chemical characterization of igneous lithic clasts from mesosiderites and howardites and comparison with eucrites and diogenites

Petrographic, electron microprobe, and instrumental neutron activation analysis (INAA) studies of igneous lithic clasts separated from mesosiderites and howardites and INAA investigation of whole rock eucrites and diogenites are presented. The trace element abundances in basaltic lithic clasts indicate more complex differentiation episodes than in eucrites which include sequential melting and expulsion of liquid from the source region and remelting of cumulate materials. Pyroxenites from mesosiderites show slight enrichments in Sc and Mn than diogenites suggesting that these pyroxenites are not fragments of diogenites. It is concluded that the heat source characteristics are spatially and temporally variable, suggesting that heating of the differentiated meteorite parent bodies may have partly come from outside the parent body.

Mittlefehldt, D. W.↗

The Apollo 16 drill core - Modal petrology and characterization of the mineral and lithic component

A string of 59 polished thin sections covering the length of the Apollo 16 deep drill core has been examined. A modal analysis, involving the optical classification of 116,000 points was made, and over 500 mineral and lithic fragments from the core were chemically analyzed using an electron microprobe. These data were used to identify and characterize the source areas of the core material and to reconstruct the accumulation history of the core.

Vaniman, D. T.↗

Lithic clasts in the Supuhee chondrite

Bulk chemical analyses of three foreign lithic clasts from Supuhee, a shocked and brecciated H6 chondrite, were carried out in an attempt to locate 'mysterite', a volatile-rich material postulated to be present. Clast 1 bears some similarities to C1 and C2 chondrites, but its relatively low (less than 9.4%) volatile content suggests a different set of physicochemical conditions during low-temperature condensation. Clast 2 was apparently derived from H-group chondrite material by loss of metal and sulfide. Clast 3 is an unusual meteorite type whose chemical composition is reminiscent of the unique chondrite Kakangari (Graham, et al., 1977). These chemically distinct bodies were apparently not present during the metamorphic event which affected Supuhee. Although the presence of mysterite was not confirmed or refuted, the present results indicate that conditions were favorable for the formation, incorporation and preservation of volatile-rich materials.

Leitch, C. A.↗

Apollo 15 breccia rake samples - Mineralogy of lithic and mineral clasts

Major features of 22 Apollo 15 breccia rake samples and 30 lithic clasts in these samples are described. The range of compositions of exsolved pyroxene grains (bulk and individual lamellae) indicates a slowly cooled mare basalt source. In terms of these data the pyroxenes closely resemble pyroxenes in large anorthosite 67075. It is suggested that the pyroxene-plagioclase-olivine clast in 15146 as well as some anomalous chemical data might result from metamorphism of a mare-type basalt or from plutonic crystallization of magma with mare basalt affinity. The bulk composition of the clast in 15146 closely matches that of Apollo 15 'green glass' to which it may be related. A unique ultrabasic clast in 15360 has an unusually low CaO content and other chemical features which suggest that this sample is unlike ultrabasic samples described to date.

Steele, I. M.↗

Petrology and geochemistry of lithic fragments separated from the Apollo 15 deep-drill core

Petrological and geochemical analysis of lithic fragments separated from the Apollo 15 deep-drill core showed these fragments to fall into the essentially the same range of rock types as observed in surface soil samples and large rock samples. Three particles are singled out as being of special interest. One sample is a mare basalt containing extremely evolved phases. The particle may represent small-scale imperfect crystal/liquid separation in a lava flow. A green glass particle is not the ultramafic emerald green glass described from the Apollo 15 site, but rather an ANT-like light green color, and has a quite different chemical composition from the ultramafic variety. One mare basalt displays a positive Eu anomaly and is enriched in plagioclase relative to olivine plus pyroxene.

Lindstrom, M. M.↗

Petrology of igneous lithic clasts from polymict eucrites ALHA76005 and ALHA77302

A total of seven lithic clasts from the polymict eucrites ALHA76005 and ALHA77302 have been studied petrographically and analyzed with the electron microprobe. All clasts are composed predominantly of pyroxene and plagioclase, + or - ilmenite, troilite, Fe-Ni metal, mesostasis, and silica. Pyroxene compositions in unequilibrated clasts and clast bulk compositions, calculated by modal recombination, indicate that the clasts originally crystallized under similar conditions and that they may be genetically related to each other by fractionation of pigeonite and plagioclase.

Simon, S. B.↗

Petrology and precursors of lithic clasts from feldspathic fragmental breccia 67975

Textures and mineral chemistry (by INAA) of five lithic clasts, including both light green and light gray clasts, from feldspathic fragmental breccia 67975 were studied. The presence of five rock types was confirmed: feldspathic microporphyritic melt breccia, metamorphosed mafic-rich melt breccia with zoned and mantled clasts, 'typical' reequilibrated lunar feldspathic granulites with granoblastic texture and homogeneous mineral chemistry, hornfels, and a recrystallized mafic-rich granulite with relict igneous texture and the composition of a ferroan anorthositic norite. The mineralogy and textural data corroborate the grouping of the light green clasts proposed by Lindstrom (1984). However, the light gray clasts do not appear to be coherent in petrologic (or chemical) characteristics; one is a plagioclase-rich, possibly monomict rock with ferroan anorthositic precursor(s), and the other represents a mixture of feldspathic granulite and ferroan anorthositic norite lithologies.

Mcgee, James J.↗