Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIMITING VALUES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Extreme-value statistics in nonlinear optics

We show that, although nonlinear optics may give rise to a vast multitude of statistics, all these statistics converge, in their extreme-value limit, to one of a few universal extreme-value statistics. Specifically, in the class of polynomial nonlinearities, such as those found in the Kerr effect, weak-field harmonic generation, and multiphoton ionization, the statistics of the nonlinear-optical output converges, in the extreme-value limit, to the exponentially tailed, Gumbel distribution. Exponentially growing nonlinear signals, on the other hand, such as those induced by parametric instabilities and stimulated scattering, are shown to reach their extreme-value limits in the class of the Fréchet statistics, giving rise to extreme-value distributions (EVDs) with heavy, manifestly nonexponential tails, thus favoring extreme-event outcomes and rogue-wave buildup.

Zheltikov, Aleksei M. (ORCID:0000000291380576)↗
DOE OSTI2022

A method for determining optimal electric range by considering electric vehicle lightweighting on perceived ownership cost

The limited driving range due to high costs and low energy densities of batteries constraints the battery electric vehicle (BEV) market growth. Lightweighting in theory can reduce energy consumption rate and extend the driving range. The knowledge gap is to quantitatively link the cost-effectiveness of light-weight technologies with range extension and consumer acceptance of BEVs. In this study, a physics-based energy consumption model of BEVs is constructed and associated with a statistics-based model on the basis of travel surveys. A perceived cost of ownership (PCO) is then developed by adding intangible costs to traditional total cost of ownership models. We estimate, at the disaggregate vehicle model and driver level and the aggregate market level, 1) the extended range due to lightweighting for a given battery size; and 2) the optimal electric range based on lightweighting decisions. The cost-effectiveness of lightweighting for BEV range extension is found to vary with income-dependent daily range limitation value, driving patterns and lightweighting technology costs. In general, adopting lightweighting in BEVs is more cost-effective for consumers with higher daily limitation value, as well as for those with higher driving intensity or suitable daily driving patterns. When the lightweighting involves a higher vehicle production cost, less lightweighting could reduce the overall PCO for BEV owners. 4 of the selected top ten BEV models are found to benefit from additional 2.09%–4.45% lightweighting. Finally, the method built in this study can guide automakers in planning R&D investments in battery and lightweighting technologies.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Investigation of Process Emissions during Thermal Cutting of Clad Metals from the Nuclear Sector - 20183

Typically, reactor pressure vessels as well as steam generators comprising low alloyed steel with a cladding of stainless steel. Recently the permissible values for Cr (VI) in the air of the working areas have been reduced in Germany from 100 μg/m{sup 3} to 1 μg/m{sup 3} air. This results in the danger that even with low-alloy steel with claddings these limit values would be exceeded when using flame cutting technologies. In order to ensure compliance with the permissible limit values, exhaust gas systems with gas cleaning measures are provided. The process emission test shall replace the assumptions required for the design of these systems with measured values. NUKEM Technologies Engineering Services GmbH (NUKEM) has chosen autogenous flame cutting as an example of a thermal cutting system for process emission testing, as there are no proven values in the literature for the Cr (VI) and NiOx emissions produced. The autogenous flame cutting can be used for a variety of cutting tasks within decommissioning projects. In order to simulate the material to be cut, mock ups were generated and cut from information about the material specification for the reactor pressure vessel from existing nuclear power plants including possible claddings. The cutting length needed for analysis in the test will be maximum 100 mm. The airborne emissions from the thermal cutting process will be captured and analyzed as follows: - Dust emission: The generated particles will be collected by a hood equipped with strong suction device and suitable filter elements. The resulting filter is gravimetrically measured before and after the tests. - Particle Size Distribution: The airborne particle size distribution measurement will result in figures for the size and number of particles arising from the thermal cutting process. - Gas Analysis: The gas analysis enables the determination of e.g. CO{sub 2}, CO, O{sub 3}, NO, NO{sub 2}. - Cr (VI) and NiOx Analysis: For the Cr (VI) and NiOx analysis, samples of the filter residue will be taken. As a result Cr (VI) in relation to total Cr as well as the Ni content will be determined by ICP-optically emission spectroscopy and put in relation to the total dust amount. The process emissions test itself as well as the necessary gas analyses and spectroscopic analyses were carried out at the Institute of Materials Science (IW) of Leibniz Universitaet Hannover (LUH). The results of the process emission tests are used to confirm the design of the gas cleaning systems. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Not even 6 dB: Gaussian quantum illumination in thermal background

Abstract In analyses of target detection with Gaussian state transmitters in a thermal background, the thermal occupation is taken to depend on the target reflectivity in a way which simplifies the analysis of the symmetric quantum hypothesis testing problem. However, this assumption precludes comparison of target detection performance between an arbitrary transmitter and a vacuum state transmitter, i.e. ‘detection without illumination’, which is relevant in a bright thermal background because a target can be detected by its optical shadow or some other perturbation of the background. Using a target-agnostic thermal environment leads to the result that the oft-claimed 6 dB possible reduction in the quantum Chernoff exponent for a two-mode squeezed vacuum transmitter over a coherent state transmitter in high-occupation thermal background is an unachievable limiting value, only occurring in a limit in which the target detection problem is ill-posed. Further analyzing quantum illumination in a target-agnostic thermal environment shows that a weak single-mode squeezed transmitter performs worse than ‘no illumination’, which is explained by the noise-increasing property of reflected low-intensity squeezed light.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Transfer functions for Q A /Q B international regulatory limits for the safe transport of radioactive materials

This paper presents a proposed revision of the International Atomic Energy Agency transport regulations, related to the A 1 and A 2 limit values used to determine the radioactive transport classification. Based on the 'Q system', a novel methodology was introduced to derive Q A and Q B values related to scenarios involving external exposure from a distant source. These values are key parameters that respectively represent the total effective dose and total equivalent dose to the skin, from all primary and secondary particles contributing to radiation exposure. The International Working Group (WG A 1 /A 2 ) is established and associated with the TRANSSC Technical Expert Group on Radiation Protection. A review of the A 1 and A 2 values is performed in response to identified limitations within the existing Q system. The followed approach is based on Monte Carlo simulations that enabled the development of transfer functions aimed at reducing computational time and increasing the flexibility of dose evaluations for any radionuclide with known particle emission spectra. This method allows updating the Q A and Q B values to account for future data evolutions (decay data, fluence-to-dose conversion coefficients) and standardizing the calculation of regulation limits across all referenced radionuclides and scenarios related to external exposure. The transfer functions are established using three Monte Carlo simulation codes—FLUKA, Geant4, and MCNP—and address the previous limitations of the 'Q system', reflecting the latest International Commission for Radiation Protection recommendations and improvements in calculation techniques. The results of the WG show consistent agreement across the codes, with minor discrepancies observed at low primary energies due to statistical uncertainties and different handling of stopping power for electrons/positrons in the codes. This revised approach aligns with current standards and recommendations, ensuring that the radiological consequences of transport accidents are acceptable for the new A 1 and A 2 limits from a radiological protection perspective.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Theoretical and experimental studies of compression and shear deformation behavior of Osmium to 280 GPa

Abstract The compression behavior of osmium metal was investigated up to 280 GPa (volume compression V/V o = 0.725) under nonhydrostatic conditions at ambient temperature using angle dispersive axial x-ray diffraction (A-XRD) with a diamond anvil cell (DAC). In addition, shear strength of osmium was measured to 170 GPa using radial x-ray diffraction (R-XRD) technique in DAC. Both diffraction techniques in DAC employed platinum as an internal pressure standard. Density functional theory (DFT) calculations were also performed, and the computed lattice parameters and volumes under compression are in good agreement with the experiments. DFT predicts a monotonous increase in axial ratio ( c/a ) with pressure and the structural anomalies of less than 1% in ( c/a ) ratio reported below 150 GPa were not reproduced in theoretical calculations and hydrostatic measurements. The measured value of shear strength of osmium ( τ ) approaches a limiting value of 6 GPa above a pressure of 50 GPa in contrast to theoretical predictions of 24 GPa and is likely due to imperfections in polycrystalline samples. DFT calculations also enable the studies of shear and tensile deformations. The theoretical ideal shear stress is found along the (001)[1–10] shear direction with the maximal shear stress ∼24 GPa at critical strain ∼0.13.

Lin, Chia-Min↗
DOE OSTI2021

Data Quality of Salt Property Measurements

Data quality is a key element to assessing technical uncertainties in property values of salt mixtures that are pivotal in molten salt reactor (MSR) design and safety assessments under both normal operating conditions and accident scenarios. Key properties for the salt mixtures being evaluated for use in MSRs have not been measured and the few values for relevant salt compositions available in the literature are inconsistent and not suitable for use in licensing. The applications of established techniques commonly used for property measurements to molten salts are still experimental in nature and vetted consensus standards are not yet available. Work is in progress to develop and standardize methods through DOE and commercially funded projects. The quality of measured property values limits the current ability to reliably design equipment and model normal MSR operation and the effects of operational upsets. Insights from experimental measurements pertinent to reducing technical uncertainty for regulatory development are summarized in this report. Quality controls are recommended for key properties based on the mathematical calculations used to derive property values and methods used to measure experimental values and salt produced for use in the measurements.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

A combined SECM and electrochemical AFM approach to probe interfacial processes affecting molecular reactivity at redox flow battery electrodes

Redox flow batteries are attractive technologies for grid energy storage since they use solutions of redox-active molecules that enable a superior scalability and the decoupling of power and energy density. However, the reaction mechanisms of the redox active components at RFB electrodes are complex, and there is currently a pressing need to understand how interfacial processes impact the kinetics and operational reversibility of RFB systems. Here, we developed a combined electrochemical imaging methodology rooted in scanning electrochemical microscopy (SECM) and atomic force microscopy (AFM) for exploring the impact of electrode structure and conditioning on the electron transfer properties of model redox-active dialkoxybenzene derivatives, 2,5-di-tert-butyl-1,4-bis(2-methoxyethoxy)benzene (C1) and 2,3-dimethyl-1,4-dialkoxybenzene (C7). Using AFM and secondary-ion mass spectrometry (SIMS), we observed the formation of interfacial films with distinct mechanical properties compared to those of cleaved graphitic surfaces, and exclusively during reduction of electrogenerated radical cations. These films had an impact on the median rate and distribution of the electron transfer rate constant at the basal plane of multilayer and single layer graphene electrodes, displaying kinetically-limited values that did not yield the activation expected per the Butler–Volmer model with a transfer coefficient ~0.5. These changes were dependent on redoxmer structure: furthermore, SECM showed strong attenuation of C7 kinetics by a surface layer on MLG and SLG, while C1 kinetics were only affected by SLG. SECM and AFM results together show that these limiting films operate exclusively on the basal plane of graphite, with the edge plane showing a relative insensitivity to cycling and operation potential. Ultimately, this integrated electrochemical imaging methodology creates new opportunities to understand the unique role of interfacial processes on the heterogeneous reactivity of redoxmers at electrodes for RFBs, with a future role in elucidating phenomena at high active concentrations and spatiotemporal variations in electrode dynamics.

25 ENERGY STORAGE↗
DOE OSTI2020

Electron Paramagnetic Resonance Characteristics and Crystal Structure of a Tutton Salt Analogue: Copper-Doped Cadmium Creatininium Sulfate

Electron paramagnetic resonance and crystallographic studies on copper-doped cadmium creatininium sulfate (CdCrnS) were undertaken to study the characteristics of a copper-hexahydrate complex in an organic analogue of Tutton's salt. X-ray diffraction experiments determined the crystal structure of CdCrnS at both 100 and 298 K. CdCrnS, like Tutton salt, crystallizes in the monoclinic space group P2 1 /n. The unit cell contains two cadmium hexahydrate complexes, four creatininium ions, four sulfates, and four additional solvation waters. Both crystallography and EPR find that the doped copper replaces the cadmium in the structure. Single-crystal EPR measurements at room temperature determined the g and copper hyperfine (A Cu ) tensors (principal values: g = 2.437, 2.134, and 2.080 and A Cu = -327, -84.8, and 7.33 MHz). EPR spectra of the powder at room temperature gave g = 2.448, 2.125, and 2.085 and A Cu = -315, -75.0, and 35.0 MHz and at 110 K gave g = 2.462, 2.116, and 2.077 and A Cu = -340, -30.0, and 35.0 MHz. The room-temperature tensors are close to the "rigid lattice limit" values found in copper-doped Tutton salts but with a higher gmin and weaker A Cu x coupling than average. A small but measurable temperature dependency of the tensors indicated the presence of a dynamic Jahn-Teller (JT) effect. In addition, the EPR line width changed dramatically with temperature, which is like that found in all copper-doped Tutton crystals. Utilizing the model of Silver-Getz for the g-value variation gave an estimate for the energy difference (δ 12 = 640 cm -1 ) between the ground and next highest JT configurations. An empirical correlation appears to exist between δ 12 and g min and A Cu x for the copper hexahydrates studied in similar crystals. Finally, this suggests a relationship between the amount of unpaired spins in the copper d-orbital x lobe and the gap between wells of the adiabatic potential surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Molecular phylogenetic analysis of the Paguristes tortugae Schmitt, 1933 complex and selected other Paguroidea (Crustacea: Decapoda: Anomura)

Morphological characters, as presently applied to describe members of the Paguristes tortugae Schmitt, 1933 species complex, appear to be of limited value in inferring phylogenetic relationships within the genus, and may have similarly misinformed understanding of relationships between members of this complex and those presently assigned to the related genera Areopaguristes Rahayu & McLaughlin, 2010 and Pseudopaguristes McLaughlin, 2002. Previously undocumented observations of similarities and differences in color patterns among populations additionally suggest genetic divergences within some species, or alternatively seem to support phylogenetic groupings of some species. In the present study, a Maximum Likelihood (ML) phylogenetic analysis was undertaken based on the H3, 12S mtDNA, and 16S mtDNA sequences of 148 individuals, primarily representatives of paguroid species from the western Atlantic. This molecular analysis supported a polyphyletic Diogenidae Ortmann, 1892, although incomplete taxonomic sampling among the genera of Diogenidae limits the utility of this finding for resolving family level relationships. Several hypotheses regarding the evolutionary relationships among hermit crab genera were refuted by the Kishino-Hasegawa (KH). ShimodairaHasegawa (SH) and Approximately Unbiased (AU) tree topology tests, among them the hypothesis that Areopaguristes is monophyletic. A lack of support for the monophyly of Areopaguristes calls into question the phylogenetic validity of gill number for the differentiation of Paguristes, Areopaguristes, and Pseudopaguristes. The study was inconclusive with regard to the relationships among these three genera, but previously unknown diversity within both Paguristes and Areopaguristes was demonstrated. Existence of an undescribed species confounded under the name Paguristes tortugae Schmitt, 1933 was supported by genetics, morphology, and coloration. A second undescribed species with remarkable similarity to Areopaguristes hummi Wass, 1955 was discovered based on genetics and coloration.

12S↗
DOE OSTI2025

Enhanced Selectivity for C 2 H 4 Production from C 2 H 6 on Partially Chlorinated IrO 2 (110) Surfaces

Modifying metal oxide surfaces to limit their oxidizing activity can provide a means of improving catalytic selectivity toward the partial oxidation of light alkanes. Here, in this study, we investigated the oxidation of C 2 H 6 on Cl-modified IrO 2 (110) surfaces using temperature-programmed reaction spectroscopy (TPRS) and first-principles microkinetic modeling. We find that substituting Cl for O in the IrO 2 (110) surface enhances the selectivity for C 2 H 6 conversion to C 2 H 4 during TPRS by suppressing extensive oxidation to CO x products, while also either enhancing C 2 H 4 production or altering it to a lesser extent, depending on the initial C 2 H 6 coverage. The C 2 H 4 selectivity increased with increasing C 2 H 6 and Cl coverage, but reached a limiting value below 50%. The Cl coverage changed negligibly during C 2 H 6 oxidation, and the surface reactivity decreased only marginally for Cl coverages up to 0.5 ML (monolayer). TPRS simulations using a microkinetic model predict C 2 H 4 and CO x product yields as a function of the Cl coverage that agree closely with the experimental results. According to the simulations, C 2 H 6 conversion to C 2 H 4 occurs on Cl-IrO 2 (110) by the hydrogenation of C 2 H 3 * species adsorbed in blocked states, in which neighboring sites are occupied only by unreactive HO and Cl species. The microkinetic modeling shows that H-hopping away from surface HO groups provides a relatively efficient route for C 2 H 3 * to escape blocked configurations and dehydrogenate, and that this process can limit the C 2 H 4 selectivity on Cl-IrO 2 (110) under the conditions studied. Overall, our results demonstrate that Cl-substitution into IrO 2 (110) enhances the selectivity for C 2 H 4 production from C 2 H 6 and provides insights into the reaction mechanism that can guide strategies to further improve the C 2 H 4 selectivity.

IrO2↗
DOE OSTI2021

Intrinsic doping limitations in inorganic lead halide perovskites

Inorganic halide perovskites (HP's) of the CsPbX 3 (X = I, Br, Cl) type have reached prominence in photovoltaic solar cell efficiencies, leading to the expectation that they are a new class of semiconductors relative to the traditional ones. Peculiarly, they have shown an asymmetry in their ability to be doped by holes vs. electrons. Indeed, both structural defect-induced doping as well as extrinsic impurity-induced doping strangely often result in HP's in a unipolar doping (dominantly p-type) with low free carriers’ concentration. This raises the question whether such doping limitations presents just a temporary setback due to insufficient optimization of the doping process, or perhaps this represents an intrinsic, physically-mandated bottleneck. Here we study three fundamental Design Principles (DP's) for ideal doping, applying them via density functional doping theory to these HP's, thus identifying the violated DP that explains the doping limitations and asymmetry in these HP's. Here, the target DP are: (i) requires that the thermodynamic transition level between different charge states induced by the dopants must ideally be energetically shallow both for donors (n-type) or acceptors (p-type); DP-(ii) requires that the ‘Fermi level pinning energies’ for electrons E (n) pin and holes E (p) pin (being the limiting value of the Fermi level before a structural defect that compensate the doping forms spontaneously) should ideally be located inside the conduction band for n-type doping and inside the valence band for p-type doping. DP-(iii) requires that the doping-induced shift in equilibrium Fermi energy ΔE (n) F towards the conduction band for n-type doping (shift of ΔE (p) F towards the valence band, for p-type doping) to be sufficiently large. We find that, even though in HP's based on Br and Cl there are numerous shallow level dopants that satisfy DP-(i), in contrast DP-(ii) is satisfied only for holes and DP-(iii) fails for both holes and electrons, being the ultimate bottleneck for the n-type doping in Iodide HP's. This suggests an intrinsic mechanism for doping limitations in this class of semiconductors in terms of recognized physical mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A clustering-based approach to ocean model–data comparison around Antarctica

The Antarctic Continental Shelf seas (ACSS) are a critical, rapidly changing element of the Earth system. Analyses of global-scale general circulation model (GCM) simulations, including those available through the Coupled Model Intercomparison Project, Phase 6 (CMIP6), can help reveal the origins of observed changes and predict the future evolution of the ACSS. However, an evaluation of ACSS hydrography in GCMs is vital: previous CMIP ensembles exhibit substantial mean-state biases (reflecting, for example, misplaced water masses) with a wide inter-model spread. Because the ACSS are also a sparely sampled region, grid-point-based model assessments are of limited value. Our goal is to demonstrate the utility of clustering tools for identifying hydrographic regimes that are common to different source fields (model or data), while allowing for biases in other metrics (e.g., water mass core properties) and shifts in region boundaries. We apply K-means clustering to hydrographic metrics based on the stratification from one GCM (Community Earth System Model version 2; CESM2) and one observation-based product (World Ocean Atlas 2018; WOA), focusing on the Amundsen, Bellingshausen and Ross seas. When applied to WOA temperature and salinity profiles, clustering identifies “primary” and “mixed” regimes that have physically interpretable bases. For example, meltwater-freshened coastal currents in the Amundsen Sea and a region of high-salinity shelf water formation in the southwestern Ross Sea emerge naturally from the algorithm. Both regions also exhibit clearly differentiated inner- and outer-shelf regimes. The same analysis applied to CESM2 demonstrates that, although mean-state model biases in water mass T–S characteristics can be substantial, using a clustering approach highlights that the relative differences between regimes and the locations where each regime dominates are well represented in the model. CESM2 is generally fresher and warmer than WOA and has a limited fresh-water-enriched coastal regimes. Given the sparsity of observations of the ACSS, this technique is a promising tool for the evaluation of a larger model ensemble (e.g., CMIP6) on a circum-Antarctic basis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

In situ aerobic methane oxidation rates in a stratified lake

Abstract Microbial aerobic methane oxidation is an important sink for aquatic methane worldwide. Despite its importance to global methane fluxes, few aerobic methane oxidation rates have been obtained in freshwater or marine environments without imposing changes to the microbial community through use of ex situ methods. A novel in situ incubation method for continuous time‐series measurements was used in Jordan Lake, North Carolina, during 2020–2021, to determine reaction kinetics for aerobic methane oxidation rates across a wide range of naturally varying methane (55–1833 nM) and dissolved oxygen (DO; 28–366 μM) concentrations and temperatures (17–30°C). Methane oxidation began immediately at the start of each of 21 incubations and methane oxidation rates were 1 st order with respect to methane. The data density allowed for accurate calculation of 1 st ‐order rate constants,k, that ranged from 0.018 to 0.462 h −1 (R 2 > 0.967). Addition of ammonium (20–45 μM) to natural concentrations ranging from 0.057 to 2.4 μM did not change aerobic methane oxidation rate kinetics, suggesting that the natural population of aerobic methane oxidizers in this eutrophic lake was not nitrogen limited. Values ofkinversely correlated most strongly with initial DO concentrations (R 2 = 0.82) rather than temperature. Values forkincreased with Julian day throughout our sampling period, suggesting seasonal influences on methane oxidation via responses to geochemical changes or shifts in microbial community abundance and composition. These experiments demonstrate a high variability in the enzymatic capacity for 1 st ‐order methane oxidation rates in this eutrophic lake that is tightly and inversely coupled to oxygen concentrations. Measurements of in situ aerobic methane oxidation rate constants allow for the direct quantification and modeling of the microbial community's capacity for methane oxidation over a wide range of natural methane concentrations.

Marine & Freshwater Biology↗
DOE OSTI2025

Development and characterization of a wild emmer wheat backcross introgression population for hard winter wheat improvement

Abstract Wild emmer wheat (Triticum turgidumsubsp.dicoccoides) is the tetraploid progenitor of hexaploid bread wheat (Triticum aestivumL.) and is known to be a valuable source of genetic variation for wheat improvement. However, direct evaluation of wild emmer diversity for agronomic potential has limited value unless performed in the backgrounds of adapted cultivars. Here, we present a genetic characterization of a population of 1601 backcross recombinant inbred lines, with an average genome composition of 75% bread wheat and 25% wild emmer. Low‐coverage whole‐genome sequencing allowed introgressions and aneuploidies to be identified at a relatively low cost per sample. We identified a relatively large proportion of small introgressions (median length 38 Mb), and we found introgressions to be distributed across all chromosomes. Approximately 44% of genotyped progeny carried at least one aneuploidy, with monosomies being by far the most common. This population, which we have denoted as the Great Plains Wild Emmer/Hard Winter Wheat introgression population (GPWEW‐IP), is, to our knowledge, the first introgression population developed through the direct hybridization of wild emmer wheat and US‐adapted hard winter wheat. We believe that this population represents a valuable resource for wheat breeders and will accelerate the discovery and integration of useful variation from wild emmer wheat.

Genetics & Heredity↗
DOE OSTI2021

The role of catalytic iron in enhancing volumetric sugar productivity during autothermal pyrolysis of woody biomass

Passivation of naturally occurring AAEM in biomass enhances sugar yields from the fast pyrolysis of biomass by preventing these metals from catalyzing the fragmentation of pyranose rings in cellulose and hemicellulose. However, because AAEM also catalyzes lignin depolymerization, its passivation can be accompanied by undesirable char agglomeration. Pretreatment of biomass with ferrous sulfate both passivates AAEM and substitutes ferrous ions as lignin depolymerization catalysts. This pretreatment has been particularly successful for high ash biomass like corn stover, but of limited value for low ash biomass like wood. This study explores the reasons for this discrepancy and offers a combined pretreatment of ferrous sulfate and ferrous acetate pretreatment to overcome char agglomeration in wood. Furthermore, this new pretreatment increased sugar yields from 4.4 wt% to 15.5 wt% and 5.4 wt% to 19.0 wt% for hardwood and softwood biomasses, respectively. This pretreatment produces an iron-rich biochar that catalyzes oxidation of the biochar under the oxygen-rich conditions of autothermal pyrolysis, which is preferentially consumed to provide the enthalpy for pyrolysis, preserving bio-oil as a more desirable energy product. Instead of producing carbon monoxide, which dominates oxidation of biochar from untreated biomass, the iron catalyzes oxidation to carbon dioxide, producing more energy per mole of oxygen consumed. In fact, oxygen demand to support autothermal pyrolysis of red oak and southern yellow pine was reduced 15% by the presence of iron in the biochar.

42 ENGINEERING↗
DOE OSTI2020

Evaluation of semi-empirical soot models for nonpremixed flames with increased stoichiometric mixture fraction and strain

Due to the size and complexity of industrial-scale systems and computing limitations, semi-empirical soot models are often employed in CFD simulations rather than computationally-expensive detailed models. Many of these models were developed for specific applications with unique characteristic timescales and/or validated only under fuel-air combustion conditions. Hence, their use in different contexts, such as oxy-combustion, could lead to inaccurate predictions. In this study, twelve semi-empirical models (1-step or 2-step) are evaluated on their ability to respond to changes in stoichiometric mixture fraction (Z st ) and strain in a series of ethylene counterflow flames which span the experimental sooting-to-non-sooting (yellow to blue) transition. A unique approach of plotting soot formation rate in normalized, local equivalence ratio space is introduced to aid in the analysis. Results show that no existing model is able to predict a blue flame when Z st is increased beyond the experimentally-measured sooting limit. Many models give the counter-intuitive result of increasing peak and/or integrated soot volume fraction (svf) as Z st increased, contrary to experimental observations. Two models are able to successfully predict a blue flame upon increase of strain to the sooting limit value. For two-step models, the strong dependence of growth rate on surface area results in high sensitivity of svf to changing flame boundary conditions, but with mixed accuracy. There is still a significant need for a robust semi-empirical model which can accurately predict soot fraction in systems with oxygen-enrichment or variable strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

On plasticity-enhanced interfacial toughness in bonded joints

Here, the performance and reliability of many structures and components depend on the integrity of interfaces between dissimilar materials. Interfacial toughness Γ is the key material parameter that characterizes resistance to interfacial crack growth, and Γ is known to depend on many factors including temperature. For example, previous work showed that the toughness of an epoxy/aluminum interface decreased 40 % as the test temperature was increased from -60 °C to room temperature (RT). Interfacial integrity at elevated temperatures is of considerable practical importance. Recent measurements show that instead of continuing to decrease with increasing temperature, Γ increases when test temperature is above RT. Cohesive zone finite element calculations of an adhesively bonded, asymmetric double cantilever beam specimen of the type used to measure Γ suggest that this increase in toughness may be a result of R-curve behavior generated by plasticity-enhanced toughening during stable subcritical crack growth with interfacial toughness defined as the critical steady-state limit value. In these calculations, which used an elastic-perfectly plastic epoxy model with a temperature-dependent yield strength, the plasticity-enhanced increase in Γ above its intrinsic value Γ o depended on the ratio of interfacial strength σ* to the yield strength σyb of the bond material. There is a nonlinear relationship between Γ/Γ o and σ*/σ yb with the value Γ/Γ o increasing rapidly above a threshold value of σ*/σ yb . The predicted increase in toughness can be significant. For example, there is nearly a factor of two predicted increase in Γ/Γ o during micrometer-scale crack-growth when σ*/σ yb = 2 (a reasonable choice for σ*/σ yb ). Furthermore, contrary to other reported results, plasticity-enhanced toughening can occur prior to crack advance as the cohesive zone forms and the peak stress at the tip of the original crack tip translates to the tip of the fully formed cohesive zone. These results suggest that plasticity-enhanced toughening should be considered when modeling interfaces at elevated temperatures.

36 MATERIALS SCIENCE↗