Material sources for the Kerr metric.
Kerr metric as Einstein field equations solution, considering Synge g method as possible Kerr metric source
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Kerr metric as Einstein field equations solution, considering Synge g method as possible Kerr metric source
By detecting gravitational wave signals from extreme mass ratio inspiraling sources (EMRIs) we will be given the opportunity to check our theoretical expectations regarding the nature of supermassive bodies that inhabit the central regions of galaxies. We have explored some qualitatively new features that a perturbed Kerr metric induces in its geodesic orbits. Since a generic perturbed Kerr metric does not possess all the special symmetries of a Kerr metric, the geodesic equations in the former case are described by a slightly nonintegrable Hamiltonian system. According to the Poincare-Birkhoff theorem, this causes the appearance of the so-called Birkhoff chains of islands on the corresponding surfaces of section in between the anticipated KAM curves of the integrable Kerr case, whenever the intrinsic frequencies of the system are at resonance. The chains of islands are characterized by finite width, i.e. there is a finite range of initial conditions that correspond to a particular resonance and consequently to a constant rational ratio of intrinsic frequencies. Thus while the EMRI changes adiabatically by radiating energy and angular momentum, by monitoring the frequencies of a signal we can look for a transient pattern, in the form of a plateau, in the evolution of their ratio. We have shown that such a plateau is anticipated to be apparent in a quite large fraction of possible orbital characteristics if the central gravitating source is not a Kerr black hole. Moreover, the plateau in the ratio of frequencies is expected to be more prominent at specific rational values that correspond to the strongest resonances. This gives a possible observational detection of such non-Kerr exotic objects.
The spacetime geometry around astrophysical black holes is supposed to be well approximated by the Kerr metric, but deviations from the Kerr solution are predicted in a number of scenarios involving new physics. Broad iron Kα lines are commonly observed in the X-ray spectrum of black holes and originate by X-ray fluorescence of the inner accretion disk. The profile of the iron line is sensitively affected by the spacetime geometry in the strong gravity region and can be used to test the Kerr black hole hypothesis. In this paper, we extend previous work in the literature. In particular: i ) as test-metric, we employ the parametrization recently proposed by Konoplya, Rezzolla, and Zhidenko, which has a number of subtle advantages with respect to the existing approaches; ii ) we perform simulations with specific X-ray missions, and we consider NuSTAR as a prototype of current observational facilities and eXTP as an example of the next generation of X-ray observatories. We find a significant difference between the constraining power of NuSTAR and eXTP. With NuSTAR, it is difficult or impossible to constrain deviations from the Kerr metric. With eXTP, in most cases we can obtain quite stringent constraints (modulo we have the correct astrophysical model).
Recently, two of us have studied iron line reverberation mapping to test black hole candidates, showing that the time information in reverberation mapping can better constrain the Kerr metric than the time-integrated approach. Motivated by this finding, here we explore the constraining power of another time-dependent measurement: an AGN iron line eclipse. An obscuring cloud passes between the AGN and the distant observer, covering different parts of the accretion disk at different times. Similar to the reverberation measurement, an eclipse might help to better identify the relativistic effects affecting the X-ray photons. However, this is not what we find. In our study, we employ the Johannsen-Psaltis parametrisation, but we argue that our conclusions hold in a large class of non-Kerr metrics. We explain our results pointing out an important difference between reverberation and eclipse measurements.
Interior solution constructions serving as Kerr metric sources noting shape, mass density and rotation rates
Angular momentum generated by body with Kerr rotating metric exterior
SgrA*, the supermassive black hole candidate at the Galactic Center, exhibits flares in the X-ray, NIR, and sub-mm bands that may be interpreted within a hot spot model. Light curves and images of hot spots orbiting a black hole are affected by a number of special and general relativistic effects, and they can be potentially used to check whether the object is a Kerr black hole of general relativity. However, in a previous study we have shown that the relativistic features are usually subdominant with respect to the background noise and the model-dependent properties of the hot spot, and eventually it is at most possible to estimate the frequency of the innermost stable circular orbit. In this case, tests of the Kerr metric are only possible in combination with other measurements. In the present work, we consider a class of non-Kerr spacetimes in which the hot spot orbit may be outside the equatorial plane. These metrics are difficult to constrain from the study of accretion disks and indeed current X-ray observations of stellar-mass and supermassive black hole candidates cannot put interesting bounds. Here we show that near future observations of SgrA* may do it. If the hot spot is sufficiently close to the massive object, the image affected by Doppler blueshift is brighter than the other one and this provides a specific observational signature in the hot spot's centroid track. We conclude that accurate astrometric observations of SgrA* with an instrument like GRAVITY should be able to test this class of metrics, except in the more unlikely case of a small viewing angle.
S-stars, discovered in the vicinity of the massive black hole (MBH) in the Galactic center (GC), are anticipated to provide unique dynamical constraints on the MBH spin and metric, in addition to the mass. In this paper, we develop a fast full general relativistic method to simultaneously constrain the MBH mass, spin, and spin direction by considering both the orbital motion of a star close to the GC MBH and the propagation of photons from the star to a distant observer. Based on the current observations and dynamical model predictions, we assume six example stars with different semimajor axes (a{sub orb}) and eccentricities (e{sub orb}) and numerically calculate their projected trajectories in the sky plane and redshift curves. Two of those stars are set to have orbital configurations similar to that of S0-2/S2 and S0-102. We find that the spin-induced effects on the projected trajectory and redshift curve of a given star, including the leading term by the Lense–Thirring precession and the frame dragging, and the high-order precession due to the quadruple moment, depend on both the absolute value and the direction of the spin. The maximum values of the spin-induced position displacement and the redshift differences of the star over a full orbit may differ by a factor of several to more than one order of magnitude for two cases with significantly different spin directions. The dependence patterns of the position displacements and redshift differences on the spin direction are different, and thus the position and the redshift data are complementary for constraining the MBH spin and its direction. Adopting the Markov Chain Monte Carlo fitting technique, we illustrate that the spin of the GC MBH is likely to be well constrained by using the motion of S0-2/S2 over a period of ∼45 years if the spin is close to one and if the astrometric and spectroscopic precisions can be as high as (σ{sub p},σ{sub Z})∼(10 μas,1 km s{sup −1}), which is expected to be realized by future facilities like GRAVITY on the Very Large Telescope Interferometer, the thirty meter telescope, and the European extremely large telescope. If σ{sub p} and σ{sub Z} can be further improved by a factor of several, the MBH spin can be well constrained by monitoring S0-2/S2 over a period of ∼15 years. In the mean time, the distance from the sun to the GC and the MBH mass can also be constrained to an unprecedented accuracy (0.01%–0.1%). If there exists a star with a semimajor axis that is a few times smaller, and eccentricity larger, than those of S0-2/S2, the MBH spin and its direction can be constrained with high accuracy over a period of ≲10 years by future facilities, even if the spin is only moderately large. Our results suggest that long-term monitoring of the motions of stars in the vicinity of the GC MBH by the next generation facilities is likely to provide a dynamical test, for the first time, to the spin and metric of the GC MBH.
We calculate the structure of an effectively optically thin and geometrically thin accretion disk in the Kerr geometry, including electron-positron pairs. We show that the properties of the disk solutions are strongly dependent on the angular momentum of the central black hole. We find that close to a rapidly rotating hole there can be an appreciable pair density even for modest accretion rates. Pair critical accretion rates recently discovered in Newtonian disk models are also shown to be present in the general relativistic models, and we show that the geometrically thin disk approximations easily break down for rapidly rotating holes.
It is shown that a complex coordinate transformation maps the Taub-Newman-Unti-Tamburino instanton metric to a Kerr-Schild metric. This metric involves a semi-infinite line defect as the gravitational analog of the Dirac string, much like the original metric. Moreover, it facilitates three versions of classical double copy correspondence with the self-dual dyon in electromagnetism, one of which involves a nonlocal operator. The relevance to the Newman-Janis algorithm is briefly noted. Published by the American Physical Society 2025
The advent of the Event Horizon Telescope (EHT), a millimeter-wave very long baseline interferometric array, has enabled spatially resolved studies of the subhorizon-scale structure for a handful of supermassive black holes. Among these, the supermassive black hole at the center of the Milky Way, Sagittarius A* (Sgr A*), presents the largest angular cross section. Thus far, these studies have focused on measurements of the black hole spin and the validation of low-luminosity accretion models. However, a critical input in the analysis of EHT data is the structure of the black hole spacetime, and thus these observations provide the novel opportunity to test the applicability of the Kerr metric to astrophysical black holes. Here we present the first simulated images of a radiatively inefficient accretion flow (RIAF) around Sgr A* employing a quasi-Kerr metric that contains an independent quadrupole moment in addition to the mass and spin that fully characterize a black hole in general relativity. We show that these images can be significantly different from the images of an RIAF around a Kerr black hole with the same spin and demonstrate the feasibility of testing the no-hair theorem by constraining the quadrupolar deviation from the Kerr metric with existing EHT data. Equally important, we find that the disk inclination and spin orientation angles are robust to the inclusion of additional parameters, providing confidence in previous estimations assuming the Kerr metric based on EHT observations. However, at present, the limits on potential modifications of the Kerr metric remain weak.
An analytic solution for the accretion of ultrahard perfect fluid onto a moving Kerr-Newman black hole is found. This solution is a generalization of the previously known solution by Petrich, Shapiro, and Teukolsky for a Kerr black hole. We show that the found solution is applicable for the case of a nonextreme black hole, however it cannot describe the accretion onto an extreme black hole due to violation of the test fluid approximation. We also present a stationary solution for a massless scalar field in the metric of a Kerr-Newman naked singularity.
Here, we discuss the physical interpretation of stress-energy tensors that source static spherically symmetric Kerr-Schild metrics. We find that the sources of such metrics with no curvature singularities or horizons do not simultaneously satisfy the weak and strong energy conditions. Sensible stress-energy tensors usually satisfy both of them. Under most circumstances, these sources are not perfect fluids and contain shear stresses. Furthermore, we show that for these systems the classical double copy associates the electric charge density to the Komar energy density. In addition, we demonstrate that the stress-energy tensors are determined by the electric charge density and their conservation equations.
According to the no-hair theorem, astrophysical black holes are fully characterized by their masses and spins and are described by the Kerr metric. This theorem can be tested observationally by measuring (at least) three different multipole moments of the spacetimes of black holes. In this paper, we calculate the profiles of fluorescent iron lines emitted from the accretion flows around black hole candidates within a framework that allows us to perform the calculation as a function of its mass and spin as well as of a free parameter that measures potential deviations from the Kerr metric. We show that such deviations lead to line profiles that are significantly altered and may exhibit a modified flux ratio of the two peaks in their characteristic double-peaked shape. We also show that the disk inclination can be measured independently of the spin and the deviation parameter at low to intermediate inclination angles, as in the case of Kerr black holes. We estimate the precision that near-future X-ray missions such as Astro-H and ATHENA+ are required to achieve in order to resolve deviations from the Kerr metric in iron line profiles and show that constraints on such deviations will be strongest for rapidly spinning black holes. More generally, we show that measuring the line profile with a precision of {approx}5% at disk inclinations of 30 Degree-Sign or 60 Degree-Sign constrains the deviation parameter to order unity for values of the spin a {approx}> 0.5M.
We reexpress the Kerr metric in standard Bondi-Sachs coordinates near null infinity I{sup +}. Using the uniqueness result of the characteristic initial value problem, we prove the Kerr metric is the only asymptotically flat, stationary, axially symmetric, type-D solution of the vacuum Einstein equation. The Taylor series of Kerr space-time is expressed in terms of Bondi-Sachs coordinates, and the Newman-Penrose constants have been calculated.
The equations of null geodesics in the STU family of rotating black hole solutions of supergravity theory, which may be considered as deformations of the vacuum Kerr metric, are completely integrable. We propose that they be used as a foil to test, for example, with what precision the gravitational field external to the black hole at the centre of our galaxy is given by the Kerr metric. By contrast with some metrics proposed in the literature, the STU metrics satisfy by construction the dominant and strong energy conditions. Our considerations may be extended to include the effects of a cosmological term. We show that these metrics permit a straightforward calculation of the properties of black hole shadows.
Very long baseline interferometric observations have resolved structure on scales of only a few Schwarzschild radii around the supermassive black holes at the centers of our Galaxy and M87. In the near future, such observations are expected to image the shadows of these black holes together with a bright and narrow ring surrounding their shadows. For a Kerr black hole, the shape of this photon ring is nearly circular unless the black hole spins very rapidly. Whether or not, however, astrophysical black holes are truly described by the Kerr metric as encapsulated in the no-hair theorem still remains an untested assumption. For black holes that differ from Kerr black holes, photon rings have been shown numerically to be asymmetric for small to intermediate spins. In this paper, I calculate semi-analytic expressions of the shapes of photon rings around black holes described by a new Kerr-like metric which is valid for all spins. I show that photon rings in this spacetime are affected by two types of deviations from the Kerr metric which can cause the ring shape to be highly asymmetric. I argue that the ring asymmetry is a direct measure of a potential violation of the no-hair theorem and that both types of deviations can be detected independently if the mass and distance of the black hole are known. In addition, I obtain approximate expressions of the diameters, displacements, and asymmetries of photon rings around Kerr and Kerr-like black holes.