Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “KENTUCKY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Kentucky Disasters: Multi-Hazard Approach to Mapping Flood Susceptibility and Vulnerability in Kentucky

Flooding is the most common and costly natural disaster in Kentucky, with major flood events in 2022 and 2023 highlighting the need for flood risk assessment. In partnership with the National Weather Service Jackson and Paducah Forecast Offices and the Kentucky Climate Center, we mapped flood risk in Kentucky using a multi-hazard approach that considered two dimensions of risk: flood susceptibility based on a weighted combination of seven physical factors and flood vulnerability based on 13 socioeconomic and infrastructure factors. We additionally analyzed NASA Soil Moisture Active Passive (SMAP) observations of surface soil moisture to explore the utility of SMAP observations for future analysis of flood risk. By analyzing flood susceptibility, we found that with equal rainfall, western Kentucky generally displays a higher propensity to flood than eastern Kentucky. In contrast, our flood vulnerability analysis indicated that more vulnerable areas were generally concentrated in the eastern part of the state. Through a combined perspective, our flood risk analysis identified much of the state as having moderate degrees of flood susceptibility and vulnerability. Our parallel analysis of antecedent soil moisture found that SMAP soil moisture levels were variable in the months leading up to each flood event but were drier than normal in the month prior to the 2023 event, as shown by negative soil moisture anomalies. These results were limited by challenges with weighting input parameters and a lack of validation but overall demonstrate the feasibility of using GIS and Earth observations for mapping flood risk and soil moisture.

analytic hierarchy process↗

Rare earth minerals in a "no tonstein" section of the Dean (Fire Clay) coal, Knox County, Kentucky

The Dean (Fire Clay) coal in Knox County, Kentucky, does not contain the megascopically-visible ash-fall tonstein present in most other sections of the coal bed. Like the Fire Clay tonstein, a low-ash portion of the coal is enriched in rare earth elements (>2400ppm, on ash basis). In addition to kaolinite produced in the diagenesis of volcanic glass, transmission electron microscopy studies indicate the coal contains primary kaolinite, La Ce Nd Th monazite, barium niobate, native gold, and Fe Ni Cr spinels. The mineral assemblages, particularly the kaolinite-monazite association and its similarity to the tonsteins in coal to the east, demonstrate the coal was subject to the REE-enriched volcanic ash fall, apparently just at a more dilute level than at locations where the tonstein is present.

coal, rare earth, tonstein↗

Liberation and release of rare earth minerals from Middle Kittanning, Fire Clay, and West Kentucky No. 13 coal sources

Here, a laboratory REE release test procedure was designed to better understand the association and liberation characteristics of rare earth elements (REEs) from coal-based material, such as coal middlings and refuse. For this particular study, three samples of mixed-phase, middling material was collected from three coal preparation plants operating in three different coal basins and coal seams, namely Fire Clay, Middle Kittanning, and West Kentucky #13. In these release tests, the mixed-phase material was first ground in a laboratory ball mill for a designated amount of time and subsequently decarbonized using staged flotation. The REE content of the high ash tailings and low ash concentrate was determined, and the process was repeated for various target grind sizes down to the micron range. The results indicate that smaller grind sizes produce increased REE concentrations in the high ash tailings, and this result is predominantly driven by the increased ash content in the decarbonized tailings. The grinding characteristics of the Fire Clay coal source showed that more energy is needed to achieve the desired particle size reduction; however further size reduction of this sample resulted in a significantly higher ash and REE content in the tailings material due to improved liberation. For the Middle Kittanning and West Kentucky #13 sources, the grinding and release data indicates that the mineral matter is liberated at a coarser particle size, and micronizing the coals only produces marginal improvements in rare earth mineral liberation and recovery.

01 COAL, LIGNITE, AND PEAT↗

Ultrafine Mineral Associations in Superhigh-Organic-Sulfur Kentucky Coals

Two high-organic-sulfur Kentucky coals, the eastern Kentucky River Gem coal and the western Kentucky Davis coal, are examined by scanning electron microscopy, (SEM) and transmission electron microscopy (TEM), both including elemental analysis by energy-dispersive spectroscopy (EDS). From the SEM-EDS analysis, it is observed that the western Kentucky coal had areas with Pb and Cd in addition to the expected Fe and S and the eastern Kentucky coal had individual Fe-S-rich areas with La and Ni and with Si, Al, Cr, Ni, and Ti. TEM and selected area electron diffraction (SAED) analyses demonstrate that anglesite with a rim of Pb-bearing amorphous Fe-oxide occurs in the western Kentucky coal. Melanterite, an Fe-sulfate, with minor Al, Si, and K EDS peaks, suggests that clay minerals may be in close association with the sulfate, is also detected in the coal. A polycrystalline metal in the eastern Kentucky sample with a composition similar to stainless steel is adjacent to an Al-rich shard. Euhedral pyrite grains surrounded by kaolinite and gibbsite are detected. Overall, it is noted that element associations should not be assumed to be organic just because minerals cannot be seen with optical microscopy or with standard bulk analytical techniques, such as X-ray diffraction (XRD).

organic sulfur, kentucky coals, geoscience, SEM↗

Annual Report FY2011: Establishment of a Laboratory for Biofuels Research at the University of Kentucky

This project is aimed at the development of the biofuels industry in Kentucky by establishing a laboratory to develop improved processes for biomass utilization. The facility is based at the University of Kentucky Center for Applied Energy Research and the Department of Biosystems and Agricultural Engineering, and constitutes an open laboratory, i.e., its equipment is available to other Kentucky researchers working in the area. The development of this biofuels facility represents a significant expansion of research infrastructure, and will provide a lasting resource for biobased research endeavors at the University of Kentucky. In order to enhance the laboratory's capabilities and contribute to on-going biofuels research at the University of Kentucky, initial research at the laboratory has focused on the following technical areas: (i) the identification of algae strains suitable for oil production, utilizing flue gas from coal-fired power plants as a source of CO 2 ; (ii) the conversion of algae to biofuels; and (iii) thermochemical methods for the deconstruction of lignin. Highlights from these activities include a detailed study of bio-oil production from the fast pyrolysis of microalgae (Scenedesmus sp.) and the application of pyrolytic gas chromatography coupled with mass spectrometry (Py-GC-MS) to the characterization of high lignin biomass feedstocks.

09 BIOMASS FUELS↗

Establishment of a Laboratory for Biofuels Research at the University of Kentucky

This project was aimed at the development of the biofuels industry in Kentucky by establishing a laboratory to develop improved processes for biomass utilization. The facility is based at the University of Kentucky Center for Applied Energy Research and the Department of Biosystems and Agricultural Engineering, and constitutes an “open” laboratory, i.e., its equipment is available to other Kentucky researchers working in the area. The development of this biofuels facility represents a significant expansion of research infrastructure, and will provide a lasting resource for biobased research endeavors at the University of Kentucky. In order to enhance the laboratory's capabilities and contribute to on-going biofuels research at the University of Kentucky, initial research at the laboratory has focused on the following technical areas: (i) the identification of algae strains suitable for oil production, utilizing flue gas from coal-fired power plants as a source of CO 2 ; (ii) the conversion of algae to biofuels; and (iii) the development of methods for the analysis of lignin and its deconstruction products. Highlights from these activities include the development of catalysts for the upgrading of lipids to hydrocarbons by means of decarboxylation/decarbonylation (deCOx), a study of bio-oil production from the fast pyrolysis of algae (Scenedesmus), and the application of pyrolytic gas chromatography coupled with mass spectrometry (Py-GC-MS) to the characterization of high lignin biomass feedstocks.

09 BIOMASS FUELS↗

Options for Kentucky's Energy Future

The Kentucky Energy and Environment Cabinet, the NGNP Industry Alliance Limited, and the Idaho National Laboratory, have conducted an evaluation of energy development opportunities for Kentucky that identifies that the deployment of a carbon conversion industry producing synthetic transportation fuels and chemicals can provide a long term and stable market and add considerable value to Kentucky’s indigenous coal and natural gas resources with the potential of providing substantive economic benefit to the Commonwealth. The evaluation has also developed a notional strategy for transformation of Kentucky’s electricity generation from an industry dominated by coal-fired plants to a more diverse mix of generating technologies that meets Kentucky’s long term objectives on improving energy diversity and reducing greenhouse gas emissions.

42 ENGINEERING↗

A compilation of mineral occurrences and the relationship of occurrences to structural elements of the Kentucky and Tennessee region

A very prominent magnetic anomaly measured by MAGSAT over the eastern mid-continent of the United States was inferred to have a source region beneath Kentucky and Tennessee. Prominent aeromagnetic and gravity anomalies are also associated with the inferred source region. A crustal model constructed to fit these anomalies interpreted the complex as a large mafic plutonic intrusion of Precambrian age. The complex was named the Kentucky body. It was noticed that the Jessamine Dome, which is a locus of intense faulting and mineralization, occurs near the northern end of the Kentucky body, and that more generally there seemed to be a spatial relationship between mineral occurrence and the body. The relationship between mineral deposits in Kentucky and Tennessee and the Kentucky body was investigated. A compilation of mineral occurrences in the region, classified according to type and age, is presented.

Mayhew, M. A.↗

East Kentucky Bioenergy Capacity Assessment Project

When you look across the landscape of Kentucky you will find a very diverse topography. In the western portions of the state you will find fertile and gently rolling soils that are prime land for traditional row crop production. As you move east towards the Appalachian Mountains the terrain becomes increasing roughed and less productive soils. One of the primary objectives of Morehead State University is to serve the eastern Kentucky population of Kentucky. Fitting within that mission is identifying new opportunities for people living in this region. With the passing of the Renewable Fuels Standard in 2005 there was a focus put on the production of biomass crops that can be used in the production of ethanol and cellulosic ethanol. The majority of US ethanol production is derived from corn. The eastern portion of Kentucky is not well suited for corn production, but might be a location for other biomass crops to be produced. Additionally, many farmers in the region were looking for alternative crops to tobacco that might be well suited for the region.

09 BIOMASS FUELS↗

Kentucky: Using LEAD Tool Data to Fund Energy Efficiency Programs

The Kentucky Office of Energy Policy (OEP) applied the U.S. Department of Energy’s (DOE’s) web-based Low-Income Energy Affordability Data (LEAD) Tool to identify areas of their state with energy affordability needs. Kentucky OEP staff used the LEAD Tool to identify counties in Kentucky with the highest energy burden, which is the percentage of household income spent on energy. With this knowledge, Kentucky OEP staff allocated funds to relevant nonprofit organizations that provide home repairs, weatherization upgrades, and other solutions in areas where these services have the highest potential energy saving benefits and can reduce energy burden.

Low-Income Energy Affordability Data Tool, LEAD To↗

Kentucky DOE EPSCoR Program

The KY DOE EPSCoR Program supports two research clusters. The Materials Cluster uses unique equipment and computational methods that involve research expertise at the University of Kentucky and University of Louisville. This team determines the physical, chemical and mechanical properties of nanostructured materials and examines the dominant mechanisms involved in the formation of new self-assembled nanostructures. State-of-the-art parallel computational methods and algorithms are used to overcome current limitations of processing that otherwise are restricted to small system sizes and short times. The team also focuses on developing and applying advanced microtechnology fabrication techniques and the application of microelectrornechanical systems (MEMS) for creating new materials, novel microdevices, and integrated microsensors. The second research cluster concentrates on High Energy and Nuclear Physics. lt connects research and educational activities at the University of Kentucky, Eastern Kentucky University and national DOE research laboratories. Its vision is to establish world-class research status dedicated to experimental and theoretical investigations in strong interaction physics. The research provides a forum, facilities, and support for scientists to interact and collaborate in subatomic physics research. The program enables increased student involvement in fundamental physics research through the establishment of graduate fellowships and collaborative work.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An Evaluation of the Carbon Sequestration Potential of the Cambro-Ordovician Strata of the Illinois and Michigan Basins. Part 1. Evaluation of Phase 2 CO 2 Injection Testing in the Deep Saline Gunter Sandstone Reservoir (Cambro-Ordovician Knox Group), Marvin Blan No. 1 Hancock County, Kentucky Part 2. Time-lapse Three-Dimensional Vertical Seismic Profile (3D-VSP) of Sequestration Target Interval with Injected Fluids

Part 1 of this report focuses on results of the western Kentucky carbon storage test, and provides a basis for evaluating injection and storage of supercritical CO 2 in Cambro-Ordovician carbonate reservoirs throughout the U.S. Midcontinent. This test demonstrated that the Cambro- Ordovician Knox Group, including the Beekmantown Dolomite, Gunter Sandstone, and Copper Ridge Dolomite in stratigraphic succession from shallowest to deepest, had reservoir properties suitable for supercritical CO 2 storage in a deep saline reservoir hosted in carbonate rocks, and that strata with properties sufficient for long-term confinement of supercritical CO 2 were present in the deep subsurface. Injection testing with brine and CO 2 was completed in two phases. The first phase, a joint project by the Kentucky Geological Survey and the Western Kentucky Carbon Storage Foundation, drilled the Marvin Blan No. 1 carbon storage research well and tested the entire Knox Group section in the open borehole – including the Beekmantown Dolomite, Gunter Sandstone, and Copper Ridge Dolomite – at 1152–2255 m, below casing cemented at 1116 m. During Phase 1 injection testing, most of the 297 tonnes of supercritical CO 2 was displaced into porous and permeable sections of the lowermost Beekmantown below 1463 m and Gunter. The wellbore was then temporarily abandoned with a retrievable bridge plug in casing at 1105 m and two downhole pressure-temperature monitoring gauges below the bridge plug pending subsequent testing. Pressure and temperature data were recorded every minute for slightly more than a year, providing a unique record of subsurface reservoir conditions in the Knox. In contrast, Phase 2 testing, this study, tested a mechanically-isolated dolomitic-sandstone interval in the Gunter.

54 ENVIRONMENTAL SCIENCES↗

Geologic characterization and carbon storage resource estimates for the knox group, Illinois Basin, Illinois, Indiana and Kentucky

Research documented in this report includes (1) refinement and standardization of regional stratigraphy across the 3-state study area in Illinois, Indiana, and Kentucky, (2) detailed core description and sedimentological interpretion of Knox cores from five wells in western Kentucky, and (3) a detailed calculation of carbon storage volumetrics for the Knox using three different methodologies. Seven regional cross sections document Knox formation distribution and thickness. Uniform stratigraphic nomenclature for all three states helps to resolve state-to-state differences that previously made it difficult to evaluate the Knox on a basin-wide scale. Correlations have also refined the interpretation of an important sandstone reservoir interval in southern Indiana and western Kentucky. This sandstone, a CO2 injection zone in the KGS 1 Blan well, is correlated with the New Richmond Sandstone of Illinois. This sandstone is over 350 ft (107 m) thick in parts of southern Indiana. It has excellent porosity and permeability at sufficient depths, and provides an additional sequestration target in the Knox. The New Richmond sandstone interval has higher predictability than vuggy and fractured carbonates, and will be easier to model and monitor CO2 movement after injection.

58 GEOSCIENCES↗

Association of the sites of heavy metals with nanoscale carbon in a Kentucky electrostatic precipitator fly ash

A combination of high-resolution transmission electron microscopy, scanning transmission electron microscopy, and electron energy-loss spectroscopy (HRTEM-STEM-EELS) was used to study fly ashes produced from the combustion of an eastern Kentucky coal at a southeastern-Kentucky wall-fired pulverized coal utility boiler retrofitted for low-NOx combustion. Fly ash was collected from individual hoppers in each row of the electrostatic precipitators (ESP) pollution-control system, with multiple hoppers sampled within each of the three rows. Temperatures within the ESP array range from about 200 {degree}C at the entry to the first row to <150{degree}C at the exit of the third row. HRTEM-STEM-EELS study demonstrated the presence of nanoscale (10 s nm) C agglomerates with typical soot-like appearance and others with graphitic fullerene-like nanocarbon structures. The minute carbon agglomerates are typically juxtaposed and intergrown with slightly larger aluminosilicate spheres and often form an ultrathin halo or deposit on the fly ash particles. The STEM-EELS analyses revealed that the nanocarbon agglomerates host even finer (<3 nm) metal and metal oxide particles. Elemental analysis indicated an association of Hg with the nanocarbon. Arsenic, Se, Pb, Co, and traces of Ti and Ba are often associated with Fe-rich particles within the nanocarbon deposits. 57 refs., 5 figs.

01 COAL, LIGNITE, AND PEAT↗

Tennessee Valley and Eastern Kentucky Wind Working Group

In December 2009, the Southern Alliance for Clean Energy (SACE), through a partnership with the Appalachian Regional Commission, EKPC, Kentucky's Department for Energy Development and Independence, SACE, Tennessee's Department of Environment and Conservation, and TVA, and through a contract with the Department of Energy, established the Tennessee Valley and Eastern Kentucky Wind Working Group (TVEKWWG). TVEKWWG consists of a strong network of people and organizations. Working together, they provide information to various organizations and stakeholders regarding the responsible development of wind power in the state. Members include representatives from utility interests, state and federal agencies, economic development organizations, non-government organizations, local decision makers, educational institutions, and wind industry representatives. The working group is facilitated by the Southern Alliance for Clean Energy. TVEKWWG supports the Department of Energy by helping educate and inform key stakeholders about wind energy in the state of Tennessee.

17 WIND ENERGY↗

Quantifying the Effect of Economic Development Zones on Electrical Load Growth in Kentucky [Slides]

The Kentucky Energy and Environment Cabinet has recently undertaken a comprehensive effort to map and catalog potential economic development sites across the state. The purpose of this technical assistance is to quantify the potential impact of developing designated sites on Kentucky's electricity load growth, providing insights at both state and county level considering the next 10 years. This analysis should explicitly incorporate and address key project uncertainties by developing various load growth scenarios that account for development scale, site specificity, and sector variability. The need for a site-specific analysis comes from the understanding that conventional econometric (top-down) load forecasting models cannot sufficiently isolate or predict the discrete load increases resulting from the development of these unique and targeted economic sites.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗