Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “K2O”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Diffusion in the system K2O-SrO-SiO2. II - Cation self-diffusion coefficients.

The self-diffusion coefficients were measured by introducing a slab of glass previously irradiated in a reactor between two slabs of unirradiated glass. By heating the specimens, etching them sequentially and determining the radioactivity, self-diffusion coefficients for K and Sr were measured. It is pointed out that the results obtained in the investigations appear to support the proposal that the network of the base glass predominantly controls the activation energy for the diffusion of ions.

Varshneya, A. K.↗

Bulk, rare earth and other trace elements in Apollo 14 and 15 and Luna 16 samples

The chemical abundances were measured by instrumental and radiochemical neutron activation analysis in a variety of lunar specimens. Apollo 14 soils are characterized by significant enrichments of Al2O3, Na2O and K2O and depletions of TiO2, FeO, MnO and Cr2O3 relative to Apollo 11 and to most of Apollo 12 soils. The uniform abundances in 14230 core tube soils and three other Apollo 14 soils indicate that the regolith is uniform to at least 22 cm depth and within approximately 200 m from the lunar module. Two Luna 16 breccias are similar in composition to Luna 16 soils. Four Apollo 15 soils (LM, STA 4, 9, and 9a) have variable compositions. Interelement correlations between MnO-FeO, Sc-FeO, V-Cr2O3 and K2O-Hf negate the hypothesis that howardite achondrites may be primitive lunar matter, argue against the fission hypothesis for the origin of the moon, and precludes any selective large scale volatilization of alkalies during lunar magmatic events.

Laul, J. C.↗

Compositional data for twenty-one Fra Mauro lunar materials.

Major, minor, and trace element analyses are presented for two igneous rocks, six breccias, four microbreccias, two breccia clasts, and six soils, as well as a sample of sawdust from rock 14066. Evaluation of the data suggests that the samples from the Fra Mauro highlands have the same nonterrestrial characteristics shown previously by the samples returned from the mare regions by Apollo 11 and 12 - namely, a high refractory element content, a lower volatile element content, and an excess reducing capacity above that due to FeO. The Fra Mauro soils have higher concentrations of Al2O3, Na2O, and K2O and lower amounts of FeO and TiO2 than do the mare soils. They also show a bimodal distribution of Ni, B, and Nb. The highland breccias are richer in SiO2, Al2O3, MgO, Na2O, and K2O than those returned from the mare lowlands. FeO, TiO2, and MnO are lower in concentration at Fra Mauro, and the highland breccias are more complex mineralogically than those collected previously.

Rose, H. J., Jr.↗

Crystallization of plagioclase in mare basalts

A detailed study has been made of the morphology, zoning and major- and minor-element chemistry of plagioclase in mare basalt 12021 and for comparison, in several other mare basalts. Two types of plagioclase can be distinguished based on growth rate as expressed by the formation of hollow as opposed to lath-shaped crystals. The liquidus plagioclase is the most sodic part of the hollow crystals and is more sodic than the lath-shaped crystals. Hollow grains show oscillatory zoning, whereas the lath-shaped grains show normal zoning. The ratios FeO/(FeO + MgO) and K2O/(K2O + Na2O) increased in both types of plagioclase as they grew, and these ratios can be used as a guide to the crystallization history of the plagioclase. The FeO/(FeO + MgO) ratios are similar to those of coprecipitating pyroxene. The data presented here suggest the onset of plagioclase nucleation is primarily controlled by magma composition, and the point at which the magma becomes supersaturated with plagioclase.

Crawford, M. L.↗

Achondrite ALHA77005 - Alteration of chromite and olivine

The olivine crystals of the 77005 achondrite are brown except for colorless shock lamellae, mottled patches, and grains adjacent to pools of impact melt. Sporadic dark alteration patches in brown olivine and Cr-rich spinel gave the following average electron-microprobe analyses: (olivine) P2O5 0.9, SiO2 57.9, TiO2 0, Al2O3 0.7, Cr2O3 0.4, V2O3 0, Fe2O3 (assumed oxidation state) 17.0, MgO 1.6, CaO 0.2, Na2O 0, K2O 1.8, SO3 (assumed oxidation state) 9.2, Cl 0.1, sum 89.8 wt pct; (spinel) P2O5 3.5, SiO2 2.1, TiO2 2.2, Al2O3 2.1, Cr2O3 13.4, V2O3 0.8, Fe2O3 40.7, MgO 0.9, CaO 0.1, Na2O 0, K2O 2.0, SO3 11.1, Cl 0.1, sum 79.0 wt pct. Ion-microprobe analyses revealed H in both. Rare orange patches in brown olivine from another area gave SiO2 33-35, FeO 30-28, MgO 28-32, sum 93 wt pct. Thermal metamorphism under dry oxidizing conditions is discussed as a possible alternative to shock-induced oxidation for generation of the brown olivine (McSween and Stoeffler, 1980). Because alteration patches transgress shock lamellae, and because sulfatic alteration occurs in fusion crusts of Antarctic meteorites (Gibson et al., 1983), alteration of the 77005 achondrite at the Antarctic surface is preferred to a complex series of processes needed for preterrestrial alteration.

Smith, J. V.↗

Pan-African alkali granites and syenites of Kerala as imprints of taphrogenic magmatism in the South Indian shield

Granite and syenite plutons with alkaline affinities ranging in age from 550 to 750 Ma sporadically puncture the Precambrian granulites of the Kerala region. All the bodies are small (20 to 60 sq km), E-W to NW-SE elongated elliptical intrusives with sharp contacts and lie on or close to major late Proterozoic lineaments. Geochemical plots of A-F-M and An-Ab-Or relations show an apparent alkali enrichment trend on the former, but the plutons define relatively distinct fields on the latter. Most of the plutons are adamellitic to granitic by chemistry. The variations of SiO2 with log sub 10 K2O/MgO (1) brings out the distinct alkaline nature of the plutons. Some of the granites are extremely potassic, like the Peralimala pluton, which shows up to 11.8 percent K2O. On a SiO2-Al2O3-Na2O+K2O (mol percent) plot, the plutons vary from peraluminous to peralkaline, but none are nepheline normative. Low MgO, low to moderate CaO and high Fe2O3/FeO values are other common characteristics. Among trace elements, depletion of Ba, Sr and Rb with high K/Ba and K/Rb values are typical. Overall, the plutons show a trend of decreasing K/Rb ratio with increasing K content. Individual plutons show more clearly defined trends similar to those from granitic masses characterized by plagioclase fractionation.

Santosh, M.↗

Geochemistry of HASP, VLT, and other glasses from double drive tube 79001/2

The Apollo 17 double drive tube 79001/2 (station 9, Van Serg Crater) is distinctive because of its extreme maturity, abundance, and variety of glass clasts. It contains mare glasses of both high Ti and very low Ti (VLT) compositions, and highland glasses of all compositions common in lunar regolith samples: highland basalt (feldspathic; Al2O3 greater than 23 wt percent), KREEP (Al2O3 less than 23 wt percent, K2O greater than 0.25 wt percent), and low-K Fra Mauro (LKFM; Al2O3 less than 23 wt percent, K2O less than 0.25 wt percent). It also contains rare specimens of high-alumina, silica-poor (HASP), and ultra Mg glasses. HASP glasses contain insufficient SiO2 to permit the calculation of a standard norm, and are thought to be the product of volatilization during impact melting. They have been studied by electron microprobe major-element analysis techniques but have not previously been analyzed for trace elements. The samples analyzed for this study were polished grain mounts of the 90-160 micron fraction of four sieved samples from the 79001/2 core (depth range 2.3-11.5 cm). A total of 80 glasses were analyzed by SEM/EDS and electron microprobe, and a subset of 33 of the glasses, representing a wide range of compositional types, was chosen for high-sensitivity INAA. A microdrilling device removed disks (mostly 50-100 micron diameter, weighing approx. 0.1-0.5 micro-g) for INAA. Preliminary data reported here are based only on short counts done within two weeks of irradiation.

Lindstrom, D. J.↗

Origin of tektites

The origin of tektites has been obscure because of the following dilemma. The application of physical principles to the data available on tektites points strongly to origin from one or more lunar volcanoes; but few glasses of tektite composition have hitherto been reported from the lunar samples. Instead, the lunar silicic glasses consist chiefly of a material very rich in K2O and poor in MgO. The ratio of K2O/MgO is higher in these glasses than in any tektites reported. The solution of the dilemma seems to come from the study of some recently discovered terrestrial deposits of tektite glass with high values of K2O/MgO at the Cretaceous Tertiary boundary. These glasses are found to be very vulnerable to crystallization into sandine or to alteration to smectite. These end products are known and are more abundant than any terrestrial deposits of tektite glass. It seems possible that, in fact, the moon produces tektite glass, mostly of the high K2O-low MgO type; but on Earth these deposits are destroyed. The much less abundant deposits with lower K and higher Mg are observed because they survive. Other objections to the lunar origin hypothesis appear to be answerable.

O'Keefe, John A.↗

Growth of Megaspherulites In a Rhyolitic Vitrophyre

Megaspherulites occur in the middle zone of a thick sequence of rhyolitic vitrophyre that occupies a small, late Eocene to early Oligocene volcanic-tectonic basin near Silver Cliff, Custer County, Colorado. Diameters of the megaspherulites range from 0.3 m to over 3.66 m, including a clay envelope. The megaspherulites are compound spherulites. consisting of an extremely large number (3.8 x 10(exp 9) to 9.9 x 10(exp 9)) of individual growth cones averaging 3 mm long by 1.25 mm wide at their termination. They are holocrystalline, very fine- to fine-grained, composed of disordered to ordered sanidine (orthoclase) and quartz, and surrounded by a thin K-feldspar, quartz rich rind, an inner clay layer with mordenite, and an outer clay layer composed wholly of 15 A montmorillonite. Whole rock analyses of the megaspherulites show a restricted composition from their core to their outer edge, with an average analyses of 76.3% SiO2, 0.34% CaO, 2.17% Na2O, 6.92% K2O, 0.83% H2O+ compared to the rhyolitic vitrophyre from which they crystallize with 71.07% SiO2, 0.57% CaO, 4.06% Na2O,4.l0% K2O, and 6.40% H2O+. The remaining oxides of Fe2O3 (total Fe), A12O3, MnO,MgO, TiO2, P2O5, Cr2O3, and trace elements show uniform distribution between the megaspherulites and the rhyolitic vitrophyre. Megaspherulite crystallization began soon after the rhyolitic lava ceased to flow as the result of sparse heterogeneous nucleation, under nonequilibrium conditions, due to a high degree of undercooling, delta T. The crystals grow with a fibrous habit which is favored by a large delta T ranging between 245 C and 295 C, despite lowered viscosity, and enhanced diffusion due to the high H2O content, ranging between 5% and 7%. Therefore, megaspherulite growth proceeded in a diffusion controlled manner, where the diffusion, rate lags behind the crystal growth rate at the crystal-liquid interface, restricting fibril lengths and diameters to the 10 micron to 15 micron and 3 micron and 8 micron ranges respectively. Once diffusion reestablishes itself at the crystallization front, a new nucleation event occurs at the terminated tips of the fibril cones and a new cone begins to develop with a similar orientation (small angle branching) to the earlier cones. During crystallization, these fibril cones impinge upon each other, resulting in fibril cone-free areas. These cone-free areas consist of coarser, fine-grained phases, dominated by quartz, which crystallized from the melt as it accumulated between the crystallizing K-feldspar fibrils of the cones. The anhydrous nature of the disordered to ordered sanidine (orthoclase) and quartz, suggests that water in the vitrophyre moved ahead of the crystallization front, resulting in a water rich fluid being enriched in Si, K, Na, Mg, Ca, Sr, Ba, and Y. The clay layers associated with the megaspherulites are therefore, the result of the deuteric alteration between the fractionated water and the vitrophyre, as indicated by the presence of the minerals mordenite and montmorillonite. This silica rich fluid also resulted in the total silicification of the megaspherulites within the upper 3 m of the vitrophyre.

Smith, Robert K.↗

A dunite-norite lunar microbreccia.

An olivine-rich microbreccia with noritic affinities, collected on the Apollo 14 mission to Fra Mauro, is described and analyzed. A photomicrograph (by plain transmitted light) of the microbreccia is discussed. One of three distinct areas on the microbreccia is shown to be a dunite containing over 90% olivine. The other two are more gabbroic in composition, though most of the mineral clasts are olivine. The fine grained matrix material contains significant amounts of K2O and P2O5, suggesting a relation to norites.

Taylor, G. J.↗

Effects of vaporization and condensation on Apollo 11 glass spherules - Implications for cooling rates.

Fourteen of 40 glass spherules present in a section of the Apollo 11 microbreccia 10019,22 were found to exhibit steep concentration gradients at their rims; the oxides of the relatively volatile elements Na, K, and P increase by, respectively, factors of up to 67, 16, and greater than 54 at the spherule rims in comparison to the homogeneous centers. These gradients usually extend over 25-30 microns. Furthermore, the natural surfaces of 11 unpolished glass spherules separated from the fines 10084,97, in 60-80% of all cases, show higher concentrations in Na2O, K2O, and P2O5 than the averages for the central portions of 45 independently analyzed glass spherules. It is suggested that the concentration gradients observed are diffusion gradients and are the result of the impact event which produced the glasses; in the impact melting process, splash drops of melt formed that lost volatiles by vaporization. A procedure is described to determine the cooling rate of a spherule from measured concentration gradients, provided the diffusion coefficients are known for the particular glass compositions in question.

Kurat, G.↗

Bulk, rare earth, and other trace elements in Apollo 14 and 15 and Luna 16 samples.

Measurement of 24 and 34 bulk, minor, and trace elements in lunar specimens by instrumental and radiochemical neutron activation analysis shows greater Al2O3, Na2O, and K2O abundances and higher TiO2, FeO, MnO and Cr2O3 depletions in Apollo 14 soil samples as compared to Apollo 11 samples and to most of Apollo 12 samples. The uniform abundances in 14230 core tube soils and three other Apollo 14 soils indicate that the regolith is uniform to at least 22 cm depth and within about 200 m from the lunar module.

Laul, J. C.↗

The Oro Grande, New Mexico, chondrite and its lithic inclusion.

The Oro Grande, New Mexico, U.S.A., chondrite was found in 1971. Electron microprobe analyses and microscopic examination show the following mineralogy: olivine (Fa 19.3 mole %), orthopyroxene (Fs 16.2 mole %), diopside, feldspar (An 13.6 mole %), chlorapatite, whitlockite, kamacite, taenite, troilite, chromite, and an iron-bearing terrestrial weathering product. A bulk chemical analysis of the meteorite shows the following results (weight %): Fe 0.84, Ni 1.46, Co 0.07, FeS 3.62, SiO2 34.18, TiO2 0.14, Al2O3 1.83, Cr2O3 0.55, Fe2O3 21.25, FeO 9.13, MnO 0.31, MgO 21.52, CaO 1.72, Na2O 0.70, K2O 0.08, P2O5 0.25, H2O(+) 2.14, H2O(-) 0.40, C 0.22, sum 100.41. On the basis of composition and texture the Oro Grande meteorite is classified as an H5 chondrite.

Fodor, R. V.↗

Major and trace elements in igneous rocks from Apollo 15.

The concentrations of major and trace elements have been determined in igneous rocks from Apollo 15. All materials analyzed have typical depletions of Eu except for minerals separated from sample 15085. Four samples have concentrations of trace elements that are similar to those of KREEP. The samples of mare basalt from Apollo 15 have higher concentrations of FeO, MgO, Mn, and Cr and lower concentrations of CaO, Na2O, K2O, and rare-earth elements (REE) as compared to the samples of mare basalt from Apollos 11, 12, and 14. The samples can be divided into two groups on the basis of their normative compositions. One group is quartz normative and has low concentrations of FeO while the other is olivine normative and has high concentrations of FeO. The trace element data indicate that the samples of olivine normative basalt could be from different portions of a single lava flow.

Helmke, P. A.↗

Glass-to-metal seals comprising relatively high expansion metals

A glass suitable for glass-to-metal seals that has a resistance to attack by moisture and a high coefficient of linear thermal expansion is introduced. Linear expansion covers the range from 12 to 14 x 10 to the minus 6 C between room temperature and 500 C. The glass is essentially composed of, by molar percent, about 9% of K2O, about 10% of Na2O, about 70% of SiO2, about 6% Al2O3, and about 5% of MgO.

Hirayama, C.↗

Electron Microprobe Analyses of Lithic Fragments and Their Minerals from Luna 20 Fines

The bulk analyses (determined with the broad beam electron microprobe technique) of lithic fragments are given in weight percentages and are arranged according to the rock classification. Within each rock group the analyses are arranged in order of increasing FeO content. Thin section and lithic fragment numbers are given at the top of each column of analysis and correspond to the numbers recorded on photo mosaics on file in the Institute of Meteoritics. CIPW molecular norms are given for each analysis. Electron microprobe mineral analyses (given in oxide weight percentages), structural formulae and molecular end member values are presented for plagioclase, olivine, pyroxene and K-feldspar. The minerals are selected mostly from lithic fragments that were also analyzed for bulk composition. Within each mineral group the analyses are presented according to the section number and lithic fragment number. Within each lithic fragment the mineral analyses are arranged as follows: Plagioclase in order of increasing CaO; olivine and pyroexene in order of increasing FeO; and K-feldspar in order of increasing K2O. The mineral grains are identified at the top of each column of analysis by grain number and lithic fragment number.

Conrad, G. H.↗

Apollo 15 rake sample microbreccias and non-mare rocks: Bulk rock, mineral and glass electron microprobe analyses

Quantitative electron microprobe data of Apollo 15 nonmare rake samples are presented. Bulk analyses of lithic fragments in the nomare rocks (expressed in oxide weight-percent) and the corresponding CIPW molecular norms are given. The mineralogy of the rocks and lithic fragments are also given; structural formulae for complete analyses and molecular end-members for all mineral analyses are included. The mineral analyses include pyroxene, olivine, plagioclase, barian K-feldspar, spinel and ilmenite, cobaltian metallic nickel-iron as well as SiO2-K2O-rich residual glass. Electron micropobe analyses (oxide weight percent) of glasses in loose fines and microbreccia samples and their CIPW molecular norms are presented along with electron microprobe data on bulk, mineral, and matrix glass from chondrules.

Hlava, P. F.↗