Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Interfacial Electron Transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Single-Molecule Interfacial Electron Transfer

Interfacial electron transfer (ET) plays an important role in many chemical and biological processes. Specifically, interfacial ET in TiO 2 -based systems is important to solar energy technology, catalysis, and environmental remediation technology. However, the microscopic mechanism of interfacial ET is not well understood with regard to atomic surface structure, molecular structure, bonding, orientation, and motion. In this project, we used two complementary methodologies; single-molecule fluorescence spectroscopy, and scanning-tunneling microscopy and spectroscopy (STM and STS) to address this scientific need. The goal of this project was to integrate these techniques and measure the molecular dependence of ET between adsorbed molecules and TiO 2 semiconductor surfaces and the ET induced reactions such as the splitting of water. The scanning probe techniques, STM and STS, are capable of providing the highest spatial resolution but not easily time-resolved data. Single-molecule fluorescence spectroscopy is capable of good time resolution but requires further development to match the spatial resolution of the STM. The integrated approach involving Peter Lu at Bowling Green State University (BGSU) and Wilson Ho at the University of California, Irvine (UC Irvine) produced methods for time and spatially resolved chemical imaging of interfacial electron transfer dynamics and photocatalytic reactions. An integral aspect of the joint research was a significant exchange of graduate students to work at the two institutions. This project bridged complementary approaches to investigate a set of common problems by working with the same molecules on a variety of solid surfaces, but using appropriate techniques to probe under ambient (BGSU) and ultrahigh vacuum (UCI) conditions. The molecular level understanding of the fundamental interfacial electron transfer processes obtained in this joint project will be important for developing efficient light harvesting, solar energy conversion, and broadly applicable to problems in interface chemistry and surface physics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Molecular design of light-harvesting photosensitizers: effect of varied linker conjugation on interfacial electron transfer

Here, interfacial electron transfer dynamics of a series of photosensitizers bound to TiO 2 via linkers of varying conjugation strength are explored by spectroscopic and computational techniques. Injection and recombination depend on the extent of conjugation in the linker, where the LUMO delocalization determines the injection dynamics but both the HOMO and HOMO–1 are involved in recombination.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Free Energy Dependencies for Interfacial Electron Transfer from Tin-Doped Indium Oxide (ITO) to Molecular Photoredox Catalysts

John B. Goodenough proposed that interfacial electron transfer kinetics from main group metal oxides should be fundamentally different from that of transition metal oxides, an expectation that has not been widely tested. Herein, the kinetics for interfacial electron transfer from mesoporous transparent conductive oxide Tin-doped Indium Oxide (ITO) to four photoredox catalysts (PCs) were characterized in acetonitrile electrolytes. The photocatalysts had the form: [Ru(4,4ʹ-R 2 -2,2′-bipyridine) 2 (4,4ʹ-(PO 3 H 2 ) 2 -2,2′-bipyridine)] 2+ , where R was H, methoxy, tert -butyl, and Br. The impact of the surface binding group was characterized with [Ru(2,2′-bipyridine) 2 (4,4ʹ-(CO 2 H) 2 -bpy)] 2+ . The interfacial electron transfer reaction ITO(e − )∣PC + → ITO∣PC was quantified by nanosecond absorption spectroscopy as a function of the applied potential (and hence ‒Δ G °). Specific conditions of applied potential were identified where the kinetics were sensitive to the incident irradiance. A layer-by-layer method was used to insert ionic methylene bridge(s) between the PC and the oxide surface. Marcus-Gerischer analysis of the kinetic data indicates non-adiabatic interfacial electron transfer with total reorganization energies that increase when bridges were placed between the photocatalyst and the ITO surface.

Bangle, Rachel E.↗
DOE OSTI2017

Single-Molecule Interfacial Electron Transfer

This project is focused on the use of single-molecule high spatial and temporal resolved techniques to study molecular dynamics in condensed phase and at interfaces, especially, the complex reaction dynamics associated with electron and energy transfer rate processes. The complexity and inhomogeneity of the interfacial ET dynamics often present a major challenge for a molecular level comprehension of the intrinsically complex systems, which calls for both higher spatial and temporal resolutions at ultimate single-molecule and single-particle sensitivities. Combined single-molecule spectroscopy and electrochemical atomic force microscopy approaches are unique for heterogeneous and complex interfacial electron transfer systems because the static and dynamic inhomogeneities can be identified and characterized by studying one molecule at a specific nanoscale surface site at a time. The goal of our project is to integrate and apply these spectroscopic imaging and topographic scanning techniques to measure the energy flow and electron flow between molecules and substrate surfaces as a function of surface site geometry and molecular structure. We have been primarily focusing on studying interfacial electron transfer under ambient condition and electrolyte solution involving both single crystal and colloidal TiO 2 and related substrates. The resulting molecular level understanding of the fundamental interfacial electron transfer processes will be important for developing efficient light harvesting systems and broadly applicable to problems in fundamental chemistry and physics. We have made significant advancement on deciphering the underlying mechanism of the complex and inhomogeneous interfacial electron transfer dynamics in dyesensitized TiO 2 nanoparticle systems that strongly involves with and regulated by molecule-surface interactions. We have studied interfacial electron transfer on TiO 2 nanoparticle surfaces by using ultrafast single-molecule spectroscopy and electrochemical AFM metal tip scanning microscopy, focusing on understanding the interfacial electron transfer dynamics at specific nanoscale electron transfer sites with high-spatially and temporally resolved topographic-and-spectroscopic characterization at individual molecule basis, characterizing single-molecule rate processes, reaction driving force, and molecule-substrate electronic coupling. One of the most significant characteristics of our new approach is that we are able to interrogate the complex interfacial electron transfer dynamics by actively pin-point energetic manipulation of the surface interaction and electronic couplings, beyond the conventional excitation and observation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Solvent influence on non-adiabatic interfacial electron transfer at conductive oxide electrolyte interfaces

The kinetics for interfacial electron transfer (ET) from a transparent conductive oxide (tin-doped indium oxide, ITO, Sn:In 2 O 3 ) to molecular acceptors 4-[N,N-di(p-tolyl)amino]benzylphosphonic acid, TPA, and [Ru II (bpy) 2 (4,4' -(PO 3 H 2 ) 2 -bpy)] 2+ , RuP, positioned at variable distances within and beyond the electric double layer (EDL), were quantified in benzonitrile and methanol by nanosecond absorption spectroscopy as a function of the thermodynamic driving force, -ΔG ° . Relevant ET parameters such as the rate constant, k et , reorganization energy, λ, and electronic coupling, Hab, were extracted from the kinetic data. Overall, k et increased as the distance between the molecular acceptor and the conductor decreased. For redox active molecules within the Helmholtz planes of the EDL, k et was nearly independent of -ΔG° , consistent with a negligibly small λ value. Rips–Jortner analysis revealed a non-adiabatic electron transfer mechanism consistent with H ab < 1 cm -1 . The data indicate that the barrier for electron transfer is greatly diminished at the conductor–electrolyte interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Interfacial electron transfer of perylenes: Influence of the anchor binding mode

Interfacial electron transfer (IET) through saturated single-linker and dual-linker groups from a perylene chromophore into nanostructured TiO2 films was studied by ultrafast spectroscopy. Perylene chromophores with one and two propanoic acid linker groups in the peri and ortho positions were investigated. In comparison to previously studied perylenes bound via unsaturated acrylic acid linkers, the chromophores with saturated linkers showed bi-exponential IET dynamics. Two distinct transfer times were observed that indicate the presence of two concurrent binding modes. A comparison between ortho- and peri-substituted sensitizers resulted in slower IET dynamics and weaker electronic coupling for ortho substitution. Finally, IET from sensitizers with saturated linker groups is neither promoted nor hindered by a second linker group. This indicates that only one of the two linkers binds covalently to the surface. This study reveals the importance of the anchor-binding mode and design considerations of the linker for regulating IET.

Chemistry↗
DOE OSTI2016

Disentangling the Physical Processes Responsible for the Kinetic Complexity in Interfacial Electron Transfer of Excited Ru(II) Polypyridyl Dyes on TiO 2

Interfacial electron transfer at titanium dioxide (TiO 2 ) is investigated herein for a series of surface bound ruthenium-polypyridyl dyes whose metal-to-ligand charge-transfer state (MLCT) energetics are tuned through chemical modification. The 12 complexes are of the form Ru II (bpy-A)(L) 2 2+ , where bpy-A is a bipyridine ligand functionalized with phosphonate groups for surface attachment to TiO 2 . Functionalization of ancillary bipyridine ligands (L) enables the potential of the excited state Ru III/ * couple, E + / *, in 0.1 M perchloric acid (HClO 4 (aq)) to be tuned from –0.69 to –1.03 V vs NHE. Each dye is excited by a 200 fs pulse of light in the visible region of the spectrum and probed with a time-delayed supercontiuum pulse (350–800 nm). Decay of the MLCT excited-state absorption at 376 nm is observed without loss of the ground-state bleach, which is a clear signature of electron injection and formation of the oxidized dye. The dye-dependent decays are biphasic with time constants in the 3–30 and 30–500 ps range. The slower injection rate constant for each dye is exponentially distributed relative to E + / *. The correlation between the exponentially diminishing density of TiO 2 sub-band acceptor levels and injection rate is well described using Marcus–Gerischer theory, with the slower decay components being assigned to injection from the thermally equilibrated state and the faster components corresponding to injection from higher energy states within the 3 MLCT manifold. These results and detailed analyses incorporating molecular photophysics and semiconductor density of states measurements indicate that the multiexponential behavior that is often observed in interfacial injection studies is not due to sample heterogeneity. Rather, this work shows that the kinetic heterogeneity results from competition between excited-state relaxation and injection as the photoexcited dye relaxes through the 3 MLCT manifold to the thermally equilibrated state, underscoring the potential for a simple kinetic model to reproduce the complex kinetic behavior often observed at the interface of mesoporous metal oxide materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structural Gating Enhances Long-Distance Light-Driven Interfacial Electron Transfer

Structural gating provides a molecular means to transfer electrons preferentially in one desired vectorial direction, a behavior needed for applications in artificial photosynthesis. At the interfaces utilized herein, visible-light absorption by a transition metal complex opens a “structural gate” by planarization of otherwise rotating phenyl rings in p-phenylene ethynylene (PE) bridge units. Planarization provides a conjugated pathway for electron flow toward a conductive oxide surface. Interfacial electron transfer to the oxide restores rotation and closes the gate to the unwanted recombination reaction. This structural gating results in nearly quantitative long-distance (>20 Å) interfacial electron transfer that occurs ~1000 times faster than transfer in the opposite direction. A comparative kinetic study of these complexes with those that contain ionic bridge units, without gating function, as a function of the applied potential and hence –ΔG° provided a physical basis for the structural gating. A small distance-dependent reorganization energy with weak electronic coupling underlies the success of this gate that enables efficient long-distance electron transfer and slow recombination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Ab Initio Modeling of Fe(II) Adsorption and Interfacial Electron Transfer at Goethite (α-FeOOH) Surfaces

Goethite (α-FeOOH) surfaces represent one of the most ubiquitous redox-active interfaces in the environment, playing an important role in biogeochemical metal cycling and contaminant residence in the subsurface. Fe(II)-catalyzed recrystallization of goethite is a fundamental process in this context, but the proposed Fe(II)aq-Fe(III)goethite electron and iron atom exchange mechanism of recrystallization remains poorly understood at the atomic level. We examine the adsorption of aqueous Fe(II) and subsequent interfacial electron transfer (ET) between adsorbed Fe(II) and structural Fe(III) at the (110) and (021) goethite surfaces using density functional theory calculations including Hubbard U corrections (DFT+U) aided by ab initio molecular dynamics simulations. We investigate various surface sites for the adsorption of Fe2+(H2O)6 in different coordination environments. Calculated energies for adsorbed complexes at both surfaces favor monodentate complexes with reduced 4- and 5-fold coordination over higher-dentate structures and 6- fold coordination. The hydrolysis of H2O ligands is observed for some pre-ET adsorbed Fe(II) configurations. ET from the adsorbed Fe(II) into the goethite lattice is calculated to be energetically uphill always, but simultaneous proton transfer from H2O ligands of the adsorbed complexes to the surface oxygen species stabilizes post-ET states. We find that surface defects such as oxygen vacancies near the adsorption site also can stabilize post-ET states, enabling the Fe(II)aq-Fe(III)goethite interfacial electron transfer reaction implied from experiments to proceed.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2025

Direct and Indirect Interfacial Electron Transfer at a Plasmonic p-Cu 7 S 4 /CdS Heterojunction

Plasmonic semiconductors exhibit significant potential for harvesting near-IR solar energy, although their mechanisms of plasmon-induced hot electron transfer (HET) are poorly understood. We report a transient absorption study of plasmon-induced HET in p-Cu 7 S 4 /CdS type II heterojunctions. Near-IR excitation of the p-Cu 7 S 4 plasmon band at ~1400 nm leads to ultrafast HET into the CdS conduction band with a time constant of <150 fs and a quantum efficiency of ~0.054%. The injected hot electrons remain in CdS with an amplitude-weighted average lifetime of 1.9 ± 0.5 ns, significantly longer than that in Au/CdS heterostructures, suggesting that plasmonic semiconductors can slow down charge recombination due to the presence of a bandgap. The excited near-IR plasmon does not decay by coupling to the interfacial charge transfer transition, likely due to its energy mismatch. This study provides a detailed mechanistic understanding and possible directions for improving plasmonic HET in plasmonic semiconductor heterojunctions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electronic origin of reorganization energy in interfacial electron transfer

Electron transfer (ET) reactions underpin energy conversion and chemical transformations in both biological and a biological systems. The efficiency of any ET process relies on achieving a desired ET rate within an optimal driving force range. Marcus theory provides a microscopic framework for understanding the activation free energy—and therefore the rate—of ET in terms of a key parameter: the reorganization energy. For electrified solid–liquid interfaces, it has long been conventionally understood that only factors in the electrolyte phase are responsible for determining the reorganization energy and that the electronic density of states (DOS) of the electrode only serves to dictate the number of thermally accessible channels for ET. Here we show instead that the electrode DOS plays a central role in governing the reorganization energy, far outweighing its conventionally assumed role. Using atomically layered heterostructures, we tune the DOS of graphene and measure outer-sphere ET kinetics. We find the ensuing variation in ET rate arises from strong modulation in a reorganization energy associated with image potential localization in the electrode. Here we redefine the traditional paradigm of heterogeneous ET kinetics, revealing a deeper role of the electrode electronic structure in interfacial reactivity.

Electrochemistry↗
DOE OSTI2024

Enhanced Interfacial Electron Transfer in Photocatalyst-Natural Enzyme Coupled Artificial Photosynthesis System: Tuning Strategies and Molecular Simulations

Laccase is capable of catalyzing a vast array of reactions, but its low redox potential limits its potential applications. The use of photocatalytic materials offers a solution to this problem by converting absorbed visible light into electrons to facilitate enzyme catalysis. Herein, MIL-53(Fe) and NH 2 -MIL-53(Fe) serve as both light absorbers and enzyme immobilization carriers, and laccase is employed for solar-driven chemical conversion. Electron spin resonance spectroscopy results confirm that visible light irradiation causes rapid transfer of photogenerated electrons from MOF excitation to T1 Cu(II) of laccase, significantly increasing the degradation rate constant of tetracycline (TC) from 0.0062 to 0.0127 min -1 . Conversely, there is only minimal or no electron transfer between MOF and laccase in the physical mixture state. Theoretical calculations demonstrate that the immobilization of laccase's active site and its covalent binding to the metal-organic framework surface augment the coupled system's activity, reducing the active site accessible from 27.8 to 18.1 Å. In conclusion, the constructed photo-enzyme coupled system successfully combines enzyme catalysis’ selectivity with photocatalysis's high reactivity, providing a promising solution for solar energy use.

36 MATERIALS SCIENCE↗