Engineering PapersSearch

SEARCH · Engineering Papers

Results for “Independent Study Project”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Development of a Software Tool to Automate ADCO Flight Controller Console Planning Tasks

This independent study project covers the development of the International Space Station (ISS) Attitude Determination and Control Officer (ADCO) Planning Exchange APEX Tool. The primary goal of the tool is to streamline existing manual and time-intensive planning tools into a more automated, user-friendly application that interfaces with existing products and allows the ADCO to produce accurate products and timelines more effectively. This paper will survey the current ISS attitude planning process and its associated requirements, goals, documentation and software tools and how a software tool could simplify and automate many of the planning actions which occur at the ADCO console. The project will be covered from inception through the initial prototype delivery in November 2011 and will include development of design requirements and software as well as design verification and testing.

Anderson, Mark G.

External Tank (ET) Foam Thermal/Structural Analysis Project

An independent study was performed to assess the pre-launch thermally induced stresses in the Space Shuttle External Tank Bipod closeout and Ice/Frost ramps (IFRs). Finite element models with various levels of detail were built that included the three types of foam (BX-265, NCFI 24-124, and PDL 1034) and the underlying structure and bracketry. Temperature profiles generated by the thermal analyses were input to the structural models to calculate the stress levels. An area of high stress in the Bipod closeout was found along the aluminum tank wall near the phenolic insulator and along the phenolic insulator itself. This area of high stress might be prone to cracking and possible delamination. There is a small region of slightly increased stress in the NCFI 24-124 foam near its joint with the Bipod closeout BX-265 foam. The calculated stresses in the NCFI 24-124 acreage foam are highest at the NCFI 24-124/PDL 1034/tank wall interface under the LO2 and LH2 IFRs. The highest calculated stresses in the LH2 NCFI 24-124 foam are higher than in similar locations in the LO2 IFR. This finding is consistent with the dissection results of IFRs on ET-120.

Moore, David F.

Stratospheric-related research using the shock tube

The capabilities of shock tubes used in stratospheric-related research are considered, and the results of three independent shock tube research projects are reported. The studies are concerned with the evaluation of stratospheric ozone depletion. In the first experiment, photoabsorption cross sections of Freon 11 and 12 at stratospheric temperatures were measured using rarefaction waves. In the second experiment, reaction-rate coefficients were determined from measurements made behind reflected shock waves. In the third experiment, electronic-transition moments of the O2 Schumann-Runge system and the A2Pi-X2Pi system of ClO were deduced from intensity measurements made behind the incident shock.

Cooper, D. M.

Roles for Agent Assistants in Field Science: Understanding Personal Projects and Collaboration

A human-centered approach to computer systems design involves reframing analysis in terms of the people interacting with each other. The primary concern is not how people can interact with computers, but how shall we design work systems (facilities, tools, roles, and procedures) to help people pursue their personal projects, as they work independently and collaboratively? Two case studies provide empirical requirements. First, an analysis of astronaut interactions with CapCom on Earth during one traverse of Apollo 17 shows what kind of information was conveyed and what might be automated today. A variety of agent and robotic technologies are proposed that deal with recurrent problems in communication and coordination during the analyzed traverse. Second, an analysis of biologists and a geologist working at Haughton Crater in the High Canadian Arctic reveals how work interactions between people involve independent personal projects, sensitively coordinated for mutual benefit. In both cases, an agent or robotic system's role would be to assist people, rather than collaborating, because today's computer systems lack the identity and purpose that consciousness provides.

Clancey, William J.

Overview of Commercial High-Speed Market Studies and NASA’s Hypersonic Technology Project

Presenting a 40-minute Throughout the history of aviation, there has been a continual desire to develop aircraft that can go higher, faster, and farther. Within each of these broad goals, significant achievements have been made in aeronautics over the decades. Specialized military aircraft can reach the edges of the atmosphere and regularly fly at supersonic speeds, with the Concorde bringing transatlantic supersonic flight to the public. In addition, commercial subsonic aircraft regularly fly nonstop flights of over 7000 nautical miles with flight times lasting over 15 hours. Each of these achievements have been enabled by research and development on the technologies required to overcome these barriers. As major technical challenges for high-speed/hypersonic flight have been overcome, the next questions that arise relate to what precisely is a viable commercial high-speed/hypersonic vehicle and what is the market for it. In 2020, NASA funded two studies to provide an independent assessment of the economic viability of high-speed/hypersonic transportation and some high level guidance on the design requirements of such a vehicle. Results from these market studies will be presented as well as insight into how these results are being used to inform ongoing strategic planning efforts in this research area within NASA’s Hypersonic Technology project.

High-Speed Independent Market Studies

Simulation of Mission Phases

This position with the Simulation and Graphics Branch (ER7) at Johnson Space Center (JSC) provided an introduction to vehicle hardware, mission planning, and simulation design. ER7 supports engineering analysis and flight crew training by providing high-fidelity, real-time graphical simulations in the Systems Engineering Simulator (SES) lab. The primary project assigned by NASA mentor and SES lab manager, Meghan Daley, was to develop a graphical simulation of the rendezvous, proximity operations, and docking (RPOD) phases of flight. The simulation is to include a generic crew/cargo transportation vehicle and a target object in low-Earth orbit (LEO). Various capsule, winged, and lifting body vehicles as well as historical RPOD methods were evaluated during the project analysis phase. JSC core mission to support the International Space Station (ISS), Commercial Crew Program (CCP), and Human Space Flight (HSF) influenced the project specifications. The simulation is characterized as a 30 meter +V Bar and/or -R Bar approach to the target object's docking station. The ISS was selected as the target object and the international Low Impact Docking System (iLIDS) was selected as the docking mechanism. The location of the target object's docking station corresponds with the RPOD methods identified. The simulation design focuses on Guidance, Navigation, and Control (GNC) system architecture models with station keeping and telemetry data processing capabilities. The optical and inertial sensors, reaction control system thrusters, and the docking mechanism selected were based on CCP vehicle manufacturer's current and proposed technologies. A significant amount of independent study and tutorial completion was required for this project. Multiple primary source materials were accessed using the NASA Technical Report Server (NTRS) and reference textbooks were borrowed from the JSC Main Library and International Space Station Library. The Trick Simulation Environment and User Training Materials version 2013.0 release was used to complete the Trick tutorial. Multiple network privilege and repository permission requests were required in order to access previous simulation models. The project was also an introduction to computer programming and the Linux operating system. Basic C++ and Python syntax was used during the completion of the Trick tutorial. Trick's engineering analysis and Monte Carlo simulation capabilities were observed and basic space mission planning procedures were applied in the conceptual design phase. Multiple professional development opportunities were completed in addition to project duties during this internship through the System for Administration, Training, and Education Resources for NASA (SATERN). Topics include: JSC Risk Management Workshop, CCP Risk Management, Basic Radiation Safety Training, X-Ray Radiation Safety, Basic Laser Safety, JSC Export Control, ISS RISE Ambassador, Basic SharePoint 2013, Space Nutrition and Biochemistry, and JSC Personal Protective Equipment. Additionally, this internship afforded the opportunity for formal project presentation and public speaking practice. This was my first experience at a NASA center. After completing this internship I have a much clearer understanding of certain aspects of the agency's processes and procedures, as well as a deeper appreciation from spaceflight simulation design and testing. I will continue to improve my technical skills so that I may have another opportunity to return to NASA and Johnson Space Center.

Carlstrom, Nicholas Mercury

Overview of the Oregon Transect Ecosystem Research Project

The Oregon Transect Ecosystem Research (OTTER) project is a study of ecosystem functions in coniferous forests using the methods of computer modeling, experimental and theoretical remote sensing, and ecological field and laboratory techniques. The study is focused on predicting the major fluxes of carbon, nitrogen, and water, and the factors that dynamically regulate them. The OTTER project was conceived to test two major questions: (1) Can a generalized ecosystem simulation model, designed to use mainly parameters available from remote sensing, predict the functioning of forests across an environmentally variable region? and (2) To what extent can the variables required by this model be derived from remotely sensed data? The scientific objectives and scope of the project demanded that a coordinated effort be made to link ground measurements with remote sensing and modeling requirements. OTTER was selected as a focus for a National Aeronautics and Space Administration (NASA)-sponsored Multi-sensor Aircraft Campaign (MAC; combining NASA aircraft and sensors with those of others) on the basis of experience gained in past ecosystem studies and remote-sensing projects, and the importance of the OTTER objectives to NASA's long-range science goals and plans. Having several independent approaches available, both on the ground and from various remote-sensing platforms, proved valuable in estimating and validating many of the critical variables. This experience and cross comparison should help simplify future studies of a similar nature. Edited data sets from the OTTER project are now available to the scientific community on optical disks or via on-line data banks at NASA (Washington, D.C., USA) and Oregon State University (Corvallis, Oregon, USA).

Peterson, David L.

Independent Validation of Specifications: A Coordination Headache

Large, complex projects face significant barriers to coordination and communication due to continuous, rapid changes during a project's life cycle. Such changes must be tracked, analyzed, and reconciled to ensure high quality in the end product, otherwise problems may get lost or ignored in the overall complexity. We report on 'work-in-progress' in the study of coordination problems between two independent, separate groups: software development and software analysis. We have begun to construct a taxonomy of coordination problems, which we illustrate with two scenarios. We briefly describe current attempts to introduce incremental improvements to coordination problems in such projects via World Wide Web tools. Based on actual project experiences, we plan to deploy such tools in a non-intrusive fashion to improve coordination and communication between software development groups.

Easterbrook, Steve

SeaWiFS technical report series. Volume 19: Case studies for SeaWiFS calibration and validation, part 2

This document provides brief reports, or case studies, on a number of investigations and data set development activities sponsored by the Calibration and Validation Team (CVT) within the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Project. Chapter 1 is a comparison with the atmospheric correction of Coastal Zone Color Scanner (CZCS) data using two independent radiative transfer formulations. Chapter 2 is a study on lunar reflectance at the SeaWiFS wavelengths which was useful in establishing the SeaWiFS lunar gain. Chapter 3 reports the results of the first ground-based solar calibration of the SeaWiFS instrument. The experiment was repeated in the fall of 1993 after the instrument was modified to reduce stray light; the results from the second experiment will be provided in the next case studies volume. Chapter 4 is a laboratory experiment using trap detectors which may be useful tools in the calibration round-robin program. Chapter 5 is the original data format evaluation study conducted in 1992 which outlines the technical criteria used in considering three candidate formats, the hierarchical data format (HDF), the common data format (CDF), and the network CDF (netCDF). Chapter 6 summarizes the meteorological data sets accumulated during the first three years of CZCS operation which are being used for initial testing of the operational SeaWiFS algorithms and systems and would be used during a second global processing of the CZCS data set. Chapter 7 describes how near-real time surface meteorological and total ozone data required for the atmospheric correction algorithm will be retrieved and processed. Finally, Chapter 8 is a comparison of surface wind products from various operational meteorological centers and field observations. Surface winds are used in the atmospheric correction scheme to estimate glint and foam radiances.

Hooker, Stanford B.

Evaluation of Matthews-WLR-CH4: A New Wetland, Lake, and Reservoir Methane Emissions Data Set

Methane (CH4) is emitted from a variety of sources, both natural and anthropogenic, and is the second most important greenhouse gas contributing to climate change. Natural wetlands are the largest single contributor to annual global CH4 emissions and other inland water sources, such as lakes and reservoirs, produce CH4 but have received less attention. These emission sources are among the most uncertain components of the global CH4 cycle. These uncertainties stem from numerous issues, including the vast variability in these ecosystems and the sensitivity of CH4 emissions to interannual climate variations. Existing CH4 emission models display large differences in wetland spatial extent and include simplified, or lack all together, wetland-type classifications. Furthermore, CH4 emissions from lakes and reservoirs are typically combined with wetlands, or ignored, on a regional and global scale. Our NASA Interdisciplinary Research in Earth Science (IDS) study is focused on developing a suite of data sets on wetlands, lakes, and reservoirs (WLR) including global distributions of types, CH4-centric classifications, and daily CH4 emission rates (hereafter Matthews-WLR-CH4). This project is unique in that it comprises source-independent emission data for WLR, the first spatially-explicit data set of lake and reservoir CH4 emissions, and wetland emissions comprising numerous different wetland-type classifications.The focus of this study is to perform the initial evaluation of the wetland and lake CH4 emissions data from Matthews-WLR-CH4. This evaluation will focus on the domain of North America and include: 1) estimates of the contribution of wetland and lake sources to total CH4 emissions and atmospheric mixing ratios, 2) comparisons of wetland fraction and CH4 emissions to a suite of existing models (e.g., Wetland and Wetland CH4 Inter-comparison of Models Project (WETCHIMP), Global Carbon Project (GCP)), and 3) an accuracy assessment with in situ airborne and tower-based atmospheric CH4 observations when the Matthews-WLR-CH4 emissions are implemented in forward and inverse CarbonTracker-Lagrange (CT-L) CH4 model simulations. Here we will present the new Matthews-WLR-CH4 wetland and lake CH4 emissions data, the initial evaluation of these products, and the path forward for our project.

Reservoir

A Case Study of 4 & 5 Cost Effectiveness

This paper looks at the Independent Verification and Validation (IV&V) of NASA's Space Shuttle Day of Launch I-Load Update (DoLILU) project. IV&V is defined. The system's development life cycle is explained. Data collection and analysis are described. DoLILU Issue Tracking Reports (DITRs) authored by IV&V personnel are analyzed to determine the effectiveness of IV&V in finding errors before the code, testing, and integration phase of the software development life cycle. The study's findings are reported along with the limitations of the study and planned future research.

Neal, Ralph D.

Agriculture Multiband Experiment Radiometer

Agriculture Multiband Experiment Radiometer (Amber) was designed and built in 1979 to 1980 and deployed in 1981. Amber was designed to simultaneously measure sunlight reflected from vegetation in 15 optical bands. In 1982, program interest shifted from ground truth to satellite image reduction and Amber was retired. Early in 1987, the project scientists concluded that Amber, because of its 15 simple and independent optical systems, would be ideally suited to study polarized light. Changes were made to add polarimeter capability to the instrument. The changes are listed and briefly discussed.

Jones, W. H.

Lewis Research Center studies of multiple large wind turbine generators on a utility network

A NASA-Lewis program to study the anticipated performance of a wind turbine generator farm on an electric utility network is surveyed. The paper describes the approach of the Lewis Wind Energy Project Office to developing analysis capabilities in the area of wind turbine generator-utility network computer simulations. Attention is given to areas such as, the Lewis Purdue hybrid simulation, an independent stability study, DOE multiunit plant study, and the WEST simulator. Also covered are the Lewis mod-2 simulation including analog simulation of a two wind turbine system and comparison with Boeing simulation results, and gust response of a two machine model. Finally future work to be done is noted and it is concluded that the study shows little interaction between the generators and between the generators and the bus.

Gilbert, L. J.

Eastern U.S. Continental Shelf Carbon Budget: Integrating Models,Data Assimilation, and Analysis

The U.S. East Coast Continental Shelf (USECoS) project was initiated in 2004 with the overall goal of developing carbon budgets for Mid-Atlantic and South Atlantic regions of the eastern U.S. coast. We addressed this goal through a series of specific research questions that were designed to understand carbon inputs and fates in the two regions, dominant food web pathways for carbon cycling, and similarities/differences in carbon cycling in the two continental shelf systems. The USECoS project represents a major effort to simultaneously synthesize and integrate diverse data sets, field measurements, models, and modeling approaches. We expect that the type of approach taken here will result in more insight than would be possible if each component of the program moved forward independently. The primary significance of this project is in providing a strong quantitative basis for the development of future observational and modeling studies of carbon budgets of continental shelf systems. A strong aspect of the USECoS project is the integration of modeling and extensive physical, chemical, and biological data sets, which provides an opportunity for modeling and data analyses to inform one another from the outset. This research is particularly germane to NASA's carbon cycle research focus and coastal research initiative and the U.S. Climate Change Research Program, all of which support the goals of the North American Carbon Program. We highlight primary approaches that have been used, and some of the challenges and results that have come from interactions among our team of investigators. The global scale and interdisciplinary nature of the science questions that we now face in Earth Science are such that integrated teams of investigators are needed to address them.

Hofmann, Eileen

The Role of NASA Engineering & Safety Center (NESC) in Advancing NASA’s Astrophysics Missions (Past, Present, and Future)

The NASA Engineering & Safety Center (NESC) was established in 2003 (after the Columbia accident) to provide an independent technical resource for the resolution of challenging technical problems (through the use of studies, analysis, tests, etc.) for NASA programs and projects. Since its inception, NESC has completed nearly 1000 technical assessments for NASA’s Human Exploration and Operation Mission Directorate (HEOMD), Science Mission Directorate (SMD), Space Technology Mission Directorate (STMD), and Aeronautics Research Mission Directorate (ARMD). Of the SMD related assessments, several were for the resolution of technical problems, analysis, or studies related to NASA’s astrophysics missions in various phases of the project from design to operation. Some of the recent examples of NESC technical support for NASA astrophysics missions have been for: Hubble Space Telescope (HST), Chandra X-ray Observatory (CXO), Fermi Gamma-ray Space Telescope, Kepler Space Telescope, Transiting Exoplanet Survey Satellite (TESS), James Webb Space Telescope (JWST), and Laser Interferometer Space Antenna (LISA). In this paper, we outline some of the technical challenges faced by these astrophysics missions and describe how NESC contributed to their resolution. The case studies cover a wide range of disciplines involving space telescopes, detectors, lasers, and attitude control systems. These efforts include innovative solutions for extending the life of the missions, technical resolution of challenging problems, strategies for risk mitigation, and failure investigations combined with lessons learned reports to advance discipline knowledge, enhance NASA capabilities, and avoid future problems.

NASA

Multidecadal Changes in the UTLS Ozone from the MERRA-2 Reanalysis and the GMI Chemistry Model

Long-term changes of ozone in the UTLS (Upper Troposphere / Lower Stratosphere) reflect the response to decreases in the stratospheric concentrations of ozone-depleting substances as well as changes in the stratospheric circulation induced by climate change. To date, studies of UTLS ozone changes and variability have relied mainly on satellite and in-situ observations as well as chemistry-climate model simulations. By comparison, the potential of reanalysis ozone data remains relatively untapped. This is despite evidence from recent studies, including detailed analyses conducted under SPARC (Scalable Processor Architecture) Reanalysis Intercomparison Project (S-RIP), that demonstrate that stratospheric ozone fields from modern atmospheric reanalyses exhibit good agreement with independent data while delineating issues related to inhomogeneities in the assimilated observations. In this presentation, we will explore the possibility of inferring long-term geographically and vertically resolved behavior of the lower stratospheric (LS) ozone from NASA's MERRA-2 (Modern-Era Retrospective Analysis for Research and Applications -2) reanalysis after accounting for the few known discontinuities and gaps in its assimilated input data. This work builds upon previous studies that have documented excellent agreement between MERRA-2 ozone and ozonesonde observations in the LS. Of particular importance is a relatively good vertical resolution of MERRA-2 allowing precise separation of tropospheric and stratospheric ozone contents. We also compare the MERRA-2 LS ozone results with the recently completed 37-year simulation produced using Goddard Earth Observing System in "replay" mode coupled with the GMI (Global Modeling Initiative) chemistry mechanism. Replay mode dynamically constrains the model with the MERRA-2 reanalysis winds, temperature, and pressure. We will emphasize the areas of agreement of the reanalysis and replay and interpret differences between them in the context of our increasing understanding of model transport driven by assimilated winds.

Ozone

Ecological Study of Lagoons Surrounding the John F. Kennedy Space Center, Brevard County, Florida : Theses and Project Reports - Volume 2

Many of the detailed studies done in connection with Ecological Study of the Lagoons surrounding the John F. Kennedy Space Port were performed as Master's Thesis investigations by various graduate students enrolled at F. I. T. during and subsequent to the report. The scope and purpose of what we came to call "the KSC Baseline Study" caught the imagination and interest of our student body. Many who were not financially or otherwise connected with the project found their inspiration in studies that were directly connected with project, and thus added materially to the totality of the knowledge gained. An example of one such study is the first article included in this Volume, A Master's Thesis study performed by Shen Phillip Chen, who chose the site for his investigation so that his results would correlate with and extend the results of others. In addition to the Master's Theses contained in this Volume, six other graduate studies must be acknowledged here as contributing to this Report, although they have not reached the stage of final publication. Ms. Sandra Fettes has completed a study of the amounts of five trace metals in mangrove leaves from plants at various locations around the Kennedy Space Center. Mr. Bernard Cohenour has isolated and identified a number of oil consuming bacteria endemic in the waters of the Indian Rivers. Mr. Charles Waterhouse has analyzed historic data of tidal gauges in the lagoonal area and correlated it with wind field records. Mr. Renkert Meyer has measured the vertical and horizontal currents of the lagoons and is attempting an interpretation of them in terms of the wind field as a driving force. Mr. Richard Campbell has measured the rate of nitrogen fixation in both the water columns and the sediments under them in the lagoons. Mr. Craig Weiderhold has measured thl3 annual variations in the populations of benthic invertebrates in the lagoons. An integral part of the F. I. T. curriculum is a requirement that each undergraduate student perform an independent study during his Senior year and submit his results in the form and format of a professional scientific report. While none of these senior Project Reports have been included in this Volume because of space limitations, many of them aided significantly in the overall study. Typical of these were: light and dark bottle studies of the blue-green algae respiration; writing and executing computer studies comparing the water chemistry data from various sites; detection and identification of nitrogen fixation bacteria in the Indian River; measurement of dissolved oils and greases in the river, photographically recording the benthic life-forms found in the river bottom; measuring the vertical structure of drift and slope currents in too lagoons; and measurement of water level variations along the long axis of a lagoon as a function of wind stress. These articles are published as a part of this Final Report in an effort to make available for the record as much of the basic data as possible. The few articles published on the Indian River have in general not contained much detailed data, so that comparisons of current status to conditions of the past are difficult or impossible. A major effort of both the Oceanographic and Ecological communities for the past decade has been the retrieval and storage of basic data in order to permit determinations of trends or changes in baseline conditions. It is believed that the information compiled here will be of great value in any future investigations.

Source record