Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “InSAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Exploring the potential of using L-Band InSAR for the mapping of flooded vegetation in tropical wetlands

Wetlands play a critical role in global water and carbon cycles, yet monitoring their water extent remains difficult, particularly beneath dense vegetation. SAR-based techniques such as backscatter thresholding are limited by complex scattering mechanisms, while fully polarimetric SAR (PolSAR) data capable of detecting doublebounce scattering remain scarce. To address these challenges, this study evaluates the potential of Interferometric SAR (InSAR) for mapping water surfaces beneath vegetation, termed flooded vegetation, using the Atrato floodplain in Colombia as a case study. We develop an automated workflow combining InSAR fringe detection with local phase homogeneity analysis and random sampling of processing parameters to generate probabilistic flooded vegetation maps. Applied to ALOS PALSAR-1 L-band image pairs from 2007–2011, the workflow captures seasonal fluctuations in flooded extent ranging from 500 to 1,500 km2. Compared to other L-band SAR inundation products, the InSAR-based maps identify broader flooded areas, with ~70% agreement in pairwise comparisons. Around 84% of detections align with existing wetland inventories and seasonal changes correspond with regional hydrological indicators, including terrestrial water storage anomalies and water gauge measurements. PolSAR analysis shows that InSAR complements backscatter-based methods by detecting inundation in areas with weak double-bounce signals. These findings suggest that combining InSAR with backscatter-based methods can improve detection of flooded vegetation, which is especially relevant for the upcoming NISAR mission that will offer frequent global L-band observations.

Coastal inundation↗
DOE OSTI2024

Advancing the Limits of InSAR to Detect Crustal Displacement from Low-Magnitude Earthquakes through Deep Learning

Detecting surface deformation associated with low-magnitude (M w ≤ 5) seismicity using interferometric synthetic aperture radar (InSAR) is challenging due to the subtlety of the signal and the often challenging imaging environments. However, low-magnitude earthquakes are potential precursors to larger seismic events, and thus characterizing the crustal displacement associated with them is crucial for regional seismic hazard assessment. We combine InSAR time-series techniques with a Deep Learning (DL) autoencoder denoiser to detect the magnitude and extent of crustal deformation from the M w = 3.4 Gallina, New Mexico earthquake that occurred on 30 July 2020. Although InSAR alone cannot detect event-related deformation from such a low-magnitude seismic event, application of the DL method reveals maximum displacements as small as (±2.5 mm) in the vicinity of both the fault and earthquake epicenter without prior knowledge of the fault system. This finding improves small-scale displacement discernment with InSAR by an order of magnitude relative to previous studies. We additionally estimate best-fitting fault parameters associated with the observed deformation. The application of the DL technique unlocks the potential for low-magnitude earthquake studies, providing new insights into local fault geometries and potential risks from higher-magnitude earthquakes. This technique also permits low-magnitude event monitoring in areas where seismic networks are sparse, allowing for the possibility of global fault deformation monitoring.

58 GEOSCIENCES↗
DOE OSTI2023

A Fusion of Geothermal and InSAR Data with Machine Learning for Enhanced Deformation Forecasting at the Geysers

The Geysers geothermal field in California is experiencing land subsidence due to the seismic and geothermal activities taking place. This poses a risk not only to the underlying infrastructure but also to the groundwater level which would reduce the water availability for the local community. Because of this, it is crucial to monitor and assess the surface deformation occurring and adjust geothermal operations accordingly. In this study, we examine the correlation between the geothermal injection and production rates as well as the seismic activity in the area, and we show the high correlation between the injection rate and the number of earthquakes. This motivates the use of this data in a machine learning model that would predict future deformation maps. First, we build a model that uses interferometric synthetic aperture radar (InSAR) images that have been processed and turned into a deformation time series using LiCSBAS, an open-source InSAR time series package, and evaluate the performance against a linear baseline model. The model includes both convolutional neural network (CNN) layers as well as long short-term memory (LSTM) layers and is able to improve upon the baseline model based on a mean squared error metric. Then, after getting preprocessed, we incorporate the geothermal data by adding them as additional inputs to the model. This new model was able to outperform both the baseline and the previous version of the model that uses only InSAR data, motivating the use of machine learning models as well as geothermal data in assessing and predicting future deformation at The Geysers as part of hazard mitigation models which would then be used as fundamental tools for informed decision making when it comes to adjusting geothermal operations.

Yazbeck, Joe (ORCID:0000000302235260)↗
DOE OSTI2022

Deep learning-accelerated 3D carbon storage reservoir pressure forecasting based on data assimilation using surface displacement from InSAR

Fast forecasting of the reservoir pressure distribution during geologic carbon storage (GCS) by assimilating monitoring data is a challenging problem. Due to high drilling cost, GCS projects usually have spatially sparse measurements from few wells, leading to high uncertainties in reservoir pressure prediction. To address this challenge, we use low-cost Interferometric Synthetic-Aperture Radar (InSAR) data as monitoring data to infer reservoir pressure build up. We develop a deep learning-accelerated workflow to assimilate surface displacement maps interpreted from InSAR and to forecast dynamic reservoir pressure. Employing an Ensemble Smoother Multiple Data Assimilation (ES-MDA) framework, the workflow updates three-dimensional (3D) geologic properties and predicts reservoir pressure with quantified uncertainties. We use a synthetic commercial-scale GCS model with bimodally distributed permeability and porosity to demonstrate the efficacy of the workflow. A two-step CNN-PCA approach is employed to parameterize the bimodal fields. The computational efficiency of the workflow is boosted by two residual U-Net based surrogate models for surface displacement and reservoir pressure predictions, respectively. The workflow can complete data assimilation and reservoir pressure forecasting in half an hour on a personal computer.

25 ENERGY STORAGE↗
DOE OSTI2024

Automating the detection of hydrological barriers and fragmentation in wetlands using deep learning and InSAR

The loss of hydrological connectivity and fragmentation of natural wetlands is a widespread driver of wetland degradation. Understanding where and how natural connectivity is impaired is essential for managing, protecting and remediating these ecosystems. Wetland Interferometric Synthetic Aperture Radar (Wetland InSAR) can provide information on surface flow orientation in wetlands at a high spatial resolution, which can be used for barrier detection. However, the broad application of this approach is constrained by the labour-intensive manual delineation of barriers based on mapped water levels. This study presents the first deep learning-based methodology for the automated detection of hydrological barriers. We trained a deep convolutional network to segment edge features of hydrological barriers in 25 image pairs captured by ALOS PALSAR-1 L-Band InSAR between 2006 and 2011. The training dataset consists of manually labelled and delineated barriers showing abrupt changes in water surface elevation and wrapped interferograms with high coherence. We tested this method across three wetland sites: the Everglades and southern Louisiana wetlands (United States) and the Cienaga de Zapata (Cuba). Across these sites, the convolutional network detected hydrological barriers with up to 84% accuracy. The model performed particularly well for linear hydrological barriers such as roads, dikes, and channels. Notably, some barriers impede flow only seasonally, appearing during low water levels and disappearing when water levels rise. Our automated approach to detecting and assessing wetland hydrologic connectivity can be applied more broadly to support the effective management of fragmented wetland ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Assessment of InSAR Seasonal Movements at Bayou Choctaw SPR Site

Ground deformation is important to monitor for the ongoing safety and stability of underground caverns. Implementing InSAR technology to monitor site-wide surface deformation at the Strategic Petroleum Reserve has revealed seasonal ground movements at Bayou Choctaw in Louisiana. The cyclic, seasonal pattern shows soil shrinkage during the spring and summer months and soil expansion during the fall and winter months. Prior to this report, no in-depth investigation was conducted to explain this seasonal phenomenon. However, the ground movement is believed to be near-surface and not geological due to the relatively insignificant movement between years. To better understand seasonality movements, soil properties, land cover, and climatic conditions are assessed to relate near-surface water and soil interactions. The soil, land, and climatic properties all contribute to seasonal ground movement, and vegetation cover and the soil's water capacity contribute to the spatial variability of InSAR seasonal measurements at Bayou Choctaw.

02 PETROLEUM↗
DOE OSTI2023

Utah FORGE: InSAR Data Best Pairs

This submission provides Interferometric Synthetic Aperture Radar (InSAR) data covering the Utah FORGE site via the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). Data was collected between 2019/01/01 and 2023/06/30. Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software. The best 112 pairs were selected based on having short orbital separations (perpendicular baseline less than 5 meters in absolute value).

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Utah FORGE 3-2535: Joint EM-Seismic-InSAR Imaging of Fracture Properties - Workshop Presentation

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development project by Lawrence Berkeley National Laboratory, presented by Dr. David Alumbaugh, Staff Scientist. The project's objective was to develop a set of technologies and workflow to image induced fracture generation and growth for an Enhanced Geothermal System (EGS). The project anticipates imaging of the fracture generation and growth at FORGE using a combination of passive seismic, active source borehole EM, and INSAR technology. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 8, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Groundwater Volume Loss in Mexico City Constrained by InSAR and GRACE Observations and Mechanical Models

Abstract Groundwater withdrawal can cause localized and rapid poroelastic subsidence, spatially broad elastic uplift of low amplitude, and changes in the gravity field. Constraining groundwater loss in Mexico City, we analyze data from the Gravity Recovery and Climate Experiment and its follow‐on mission (GRACE/FO) and Synthetic Aperture Radar (SAR) Sentinel‐1A/B images between 2014 and 2021. GRACE/FO observations yield a groundwater loss of 0.85–3.87 km 3 /yr for a region of ∼300 × 600 km surrounding Mexico City. Using the high‐resolution interferometric SAR data set, we measure >35 cm/yr subsidence within the city and up to 2 cm/yr of uplift in nearby areas. Attributing the long‐term subsidence to poroelastic aquifer compaction and the long‐term uplift to elastic unloading, we apply respective models informed by local geology, yielding groundwater loss of 0.86–12.57 km 3 /yr. Our results suggest Mexico City aquifers have been depleting at faster rates since 2015, exacerbating the socioeconomic and health impacts of long‐term groundwater overdrafts.

58 GEOSCIENCES↗
DOE OSTI2022

Utah FORGE InSAR Data from 2022

Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software (see link in Resources). Data from January through June 2022.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Unmanned Aerial Vehicle Synthetic Aperture RADAR for Surface Change Monitoring

Space-based and airplane-based synthetic aperture RADAR (SAR) can monitor ground height using interferometric SAR (InSAR) collections. However, fielding the airplane-based SAR is expensive and coordinating the frequency and timing of ground experiments with space-based SAR is challenging. This research explored the possibility of using a small, mobile unmanned aerial vehicle- base (UAV) SAR to see if it could provide a quick and inexpensive InSAR option for the Source Physics Experiment (SPE) Phase III project. Firstly, a local feasibility collection using a UAV-based SAR showed that InSAR products and height measurements were possible, but that in-scene fiducials were needed to assist in digital elevation model (DEM) construction. Secondly, an InSAR collection was planned and executed over the SPE Phase III site using the same platform configuration. We found that the image formation by the SAR manufacturer creates discontinuities, and that noise impacted the generation and accuracy of height maps. These processing artifacts need to be overcome to generate an accurate height map.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Predicting Short-Term Deformation in the Central Valley Using Machine Learning

Land subsidence caused by excessive groundwater pumping in Central Valley, California, is a major issue that has several negative impacts such as reduced aquifer storage and damaged infrastructures which, in turn, produce an economic loss due to the high reliance on crop production. This is why it is of utmost importance to routinely monitor and assess the surface deformation occurring. Two main goals that this paper attempts to accomplish are deformation characterization and deformation prediction. The first goal is realized through the use of Principal Component Analysis (PCA) applied to a series of Interferomtric Synthetic Aperture Radar (InSAR) images that produces eigenimages displaying the key characteristics of the subsidence. Water storage changes are also directly analyzed by the use of data from the Gravity Recovery and Climate Experiment (GRACE) twin satellites and the Global Land Data Assimilation System (GLDAS). The second goal is accomplished by building a Long Short-Term Memory (LSTM) model to predict short-term deformation after developing an InSAR time series using LiCSBAS, an open-source InSAR time series package. The model is applied to the city of Madera and produces better results than a baseline averaging model and a one dimensional convolutional neural network (CNN) based on a mean squared error metric showing the effectiveness of machine learning in deformation prediction as well as the potential for incorporation in hazard mitigation models. The model results can directly aid policy makers in determining the appropriate rate of groundwater withdrawal while maintaining the safety and well-being of the population as well as the aquifers’ integrity.

58 GEOSCIENCES↗
DOE OSTI2024

Joint Inversion of Regional Waveform, First-Motion Polarity, and Synthetic Aperture Radar Surface Displacement for the Fourth and Sixth North Korean Declared Nuclear Explosions

Here, this study analyzed the Democratic People’s Republic of Korea’s (DPRK) fourth (DPRK4, 6 January 2016 M w 4.49) and sixth (DPRK6, 7 September 2017 M w 5.2) declared nuclear tests, employing a joint seismic and Interferometric Synthetic Aperture Radar (InSAR) inversion to improve understanding of these events and enhance moment tensor (MT) inversion capabilities. The recent efforts have focused on employing seismic waveform and InSAR geodetic deformation data separately to analyze these and the previous nuclear tests (e.g., Chiang et al., 2018; Myers et al., 2018; Wang et al., 2018). Building upon our previous work (Chi-Durán et al., 2021), we performed a joint regional waveform, first-motion (FM) polarity, and surface displacement inversion, which demonstrated improved source-type discrimination, a revised MT solution with reduced scalar moment uncertainty, and an independently constrained location. In this article, we build on the previous results for DPRK6 by including an analysis using a four-layered velocity model with free-surface topography to compute the near-source static deformation Green’s functions. The model consists of a 50 m basalt layer (⁠V P = 2.07 km/s, V S = 1.2 km/s⁠), a 250 m stratified volcanic deposit layer (⁠V P = 1.73 km/s, V S = 1.0 km/s⁠), a 700 m weathered granodiorite layer (⁠V P = 2.5 km/s, V S = 1.3 km/s⁠⁠), and a granodiorite half-space (⁠V P = 5.35 km/s, V S = 3.09 km/s⁠⁠). The half-space shares the velocity of the regional MDJ2 velocity model (Ford et al., 2010), which has proven effective for waveform inversion in the region. This model considers the range of reported values for various lithologies and weathering effects. Our findings show that using the layered velocity model enhances the recovery of source location and depth for both the explosions by improving fits and reducing uncertainties. The joint inversion also improves source-type discrimination and better constrains the scalar seismic moment necessary for downstream yield estimation.

58 GEOSCIENCES↗
DOE OSTI2023

Patterns and rates of soil movement and shallow failures across several small watersheds on the Seward Peninsula, Alaska

Abstract. Thawing permafrost can alter topography, ecosystems, and sediment and carbon fluxes, but predicting landscape evolution of permafrost-influenced watersheds in response to warming and/or hydrological changes remains an unsolved challenge. Sediment flux and slope instability in sloping saturated soils have been commonly predicted from topographic metrics (e.g., slope, drainage area). In addition to topographic factors, cohesion imparted by soil and vegetation and melting ground ice may also control spatial trends in slope stability, but the distribution of ground ice is poorly constrained and hard to predict. To address whether slope stability and surface displacements follow topographic-based predictions, we document recent drivers of permafrost sediment flux present on a landscape in western Alaska that include creep, solifluction, gullying, and catastrophic hillslope failures ranging in size from a few meters to tens of meters, and we find evidence of rapid and substantial landscape change on an annual timescale. We quantify the timing and rate of surface movements using a multi-pronged, multi-scalar dataset including aerial surveys, interannual GPS surveys, synthetic aperture radar interferometry (InSAR), and climate data. Despite clear visual evidence of downslope soil transport of solifluction lobes, we find that the interannual downslope surface displacement of these features does not outpace downslope displacement of soil in locations where lobes are absent (downslope movement means: 7 cm yr−1 for lobes over 2 years vs. 10 cm yr−1 in landscape positions without lobes over 1 year). Annual displacements do not appear related to slope, drainage area, or modeled total solar radiation but are likely related to soil thickness, and volumetric sediment fluxes are high compared to temperate landscapes of comparable bedrock lithology. Time series of InSAR displacements show accelerated movement in late summer, associated with intense rainfall and/or deep thaw. While mapped slope failures do cluster at slope–area thresholds, a simple slope stability model driven with hydraulic conductivities representative of throughflow in mineral and organic soil drastically overpredicts the occurrence of slope failures. This mismatch implies permafrost hillslopes have unaccounted-for cohesion and/or throughflow pathways, perhaps modulated by vegetation, which stabilize slopes against high rainfall. Our results highlight the breadth and complexity of soil transport processes in Arctic landscapes and demonstrate the utility of using a range of synergistic data collection methods to observe multiple scales of landscape change, which can aid in predicting periglacial landscape evolution.

54 ENVIRONMENTAL SCIENCES↗