Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Illinois Basin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Geologic characterization and carbon storage resource estimates for the knox group, Illinois Basin, Illinois, Indiana and Kentucky

Research documented in this report includes (1) refinement and standardization of regional stratigraphy across the 3-state study area in Illinois, Indiana, and Kentucky, (2) detailed core description and sedimentological interpretion of Knox cores from five wells in western Kentucky, and (3) a detailed calculation of carbon storage volumetrics for the Knox using three different methodologies. Seven regional cross sections document Knox formation distribution and thickness. Uniform stratigraphic nomenclature for all three states helps to resolve state-to-state differences that previously made it difficult to evaluate the Knox on a basin-wide scale. Correlations have also refined the interpretation of an important sandstone reservoir interval in southern Indiana and western Kentucky. This sandstone, a CO2 injection zone in the KGS 1 Blan well, is correlated with the New Richmond Sandstone of Illinois. This sandstone is over 350 ft (107 m) thick in parts of southern Indiana. It has excellent porosity and permeability at sufficient depths, and provides an additional sequestration target in the Knox. The New Richmond sandstone interval has higher predictability than vuggy and fractured carbonates, and will be easier to model and monitor CO2 movement after injection.

58 GEOSCIENCES↗

Geochronology of Cambrian Sedimentary and Volcanic Rocks in the Illinois Basin: Defining the Illinois Aulacogen

The Wabash #1 well, drilled for the Wabash CarbonSAFE Project and located in Vigo County, Indiana, USA, was drilled in early 2020 as a stratigraphic test well to characterize and evaluate the basal Cambrian Mt. Simon Sandstone for carbon dioxide storage (TD=8750 ft; 2667 m). The Wabash #1 well is located along the eastern flank of a newly interpreted Cambrian aulacogen that occurs in western Indiana and eastern Illinois. Here we present 938 new detrital zircon U-Pb ages (LA-ICPMS) from early Cambrian sandstones sampled near the base of the well. A basalt lava flow was penetrated at ~8530 ft (2600 m) and has an 40 Ar/ 39 Ar age of 525.03 +/- 1.10 Ma, which represents the first known Cambrian crust in the Illinois Basin. The two sandstone samples from beneath the basalt are dominated by zircons derived from the Midcontinent Granite-Rhyolite terrane. The sandstone samples from above the basalt reflect a mixture of these locally derived Mazatzal and Granite-Rhyolite terrane zircons, but also distal Archean, Grenville, and Yavapai zircons. Each sample has small numbers of Cambrian zircons, which is consistent with those in basal Cambrian sandstones in other deep wells to the west. These early Cambrian detrital zircons and early Cambrian age of the basalt, combined with sediment thickness patterns permit the interpretation of the Illinois aulacogen, which formed during the final stage of Rodinian rifting.

58 GEOSCIENCES↗

A Play-Based Exploration of CO 2 Storage in the Illinois Basin: Community Baseline Assessment for Carbon Storage Engagement Planning in the Illinois Basin

This report presents a stakeholder mapping analysis conducted as part of the Play-Based Exploration of CO 2 Storage in the Illinois Basin project (DOE Cooperative Agreement DE-FE0032366). The analysis was undertaken to systematically identify, categorize, and characterize stakeholder groups and community conditions relevant to the planning and deployment of carbon capture and storage (CCS) infrastructure across the Illinois Basin. Its purpose is to establish a contextual baseline that informs targeted engagement strategies, supports equitable project planning, and strengthens the social dimensions of CCS site screening.

01 COAL, LIGNITE, AND PEAT↗

Leakage Risk Assessment of CO{sub 2} Transportation by Pipeline at the Illinois Basin Decatur Project, Decatur, Illinois

The Illinois Basin Decatur Project (IBDP) is designed to confirm the ability of the Mt. Simon Sandstone, a major regional saline-water-bearing formation in the Illinois Basin, to store 1 million tons of carbon dioxide (CO{sub 2}) injected over a period of three years. The CO{sub 2} will be provided by Archer Daniels Midland (ADM) from its Decatur, Illinois, ethanol plant. In order to transport CO{sub 2} from the capture facility to the injection well (also located within the ADM plant boundaries), a high-pressure pipeline of length 3,200 ft (975 m) has been constructed, running above the ground surface within the ADM plant footprint. We have qualitatively evaluated risks associated with possible pipeline failure scenarios that lead to discharge of CO{sub 2} within the real-world environment of the ADM plant in which there are often workers and visitors in the vicinity of the pipeline. There are several aspects of CO{sub 2} that make its transportation and potential leakage somewhat different from other substances, most notable is its non-flammability and propensity to change to solid (dry ice) upon strong decompression. In this study, we present numerical simulations using Computational Fluid Dynamics (CFD) methods of the release and dispersion of CO{sub 2} from individual hypothetical pipeline failures (i.e., leaks). Failure frequency of the various components of a pipeline transportation system over time are taken from prior work on general pipeline safety and leakage modeling and suggest a 4.65% chance of some kind of pipeline failure over the three-years of operation. Following the Precautionary Principle (see below), we accounted for full-bore leakage scenarios, where the temporal evolution of the mass release rate from the high-pressure pipeline leak locations was simulated using a state-of-the-art Pipe model which considers the thermodynamic effects of decompression in the entire pipeline. Failures have been simulated at four representative locations along the pipeline route within the ADM plant. Leakage scenarios at sites along the route of the pipeline, where plant operations (e.g., vehicular and train transportation) seem to present a higher likelihood of accidental failure, for example due to vehicles or equipment crashing into the pipeline and completely severing it, were modeled by allowing them to have a double source consistent with the pipeline releasing high-pressure CO{sub 2} from both ends of the broken pipe after a full-bore offset rupture. Simulation results show that the built environment of the plant plays a significant role in the dispersion of the gas as leaking CO{sub 2} can impinge upon buildings and other infrastructure. In all scenarios simulated, the region of very high-concentration of CO{sub 2} is limited to a small area around the pipeline failure, suggesting the likelihood of widespread harmful CO{sub 2} exposure to plant personnel from pipeline leakage is low. An additional risk is posed by the blast wave that emanates from a high-pressure pipeline when it is breached quickly. We estimate the blast wave risk as low because it occurs only for a short time in the immediate vicinity of the rupture, and requires an instantaneous large-scale rupture to occur. We recommend consideration of signage and guard rails and posts to mitigate the likelihood of vehicles crashing into the pipeline. A standardized emergency response plan applicable to capture plants within industrial sites could be developed based on the IBDP that would be useful for other capture plants. Finally, we recommend carrying out coupled wellbore-reservoir blowout scenario modeling to understand the potential for hazardous conditions arising from an unexpected blowout at the wellhead.

54 ENVIRONMENTAL SCIENCES↗

An Assessment of Geologic Carbon Sequestration Options in the Illinois Basin: Phase III

The Illinois Basin – Decatur Project (IBDP) successfully demonstrated the safe geologic storage of carbon dioxide (CO 2 ) at the near commercial-scale. Such demonstration projects are essential to gain understanding of the workflows and monitoring equipment needed to be able to geologically sequester CO 2 at a commercial scale, and to gain public confidence in the technology. The IBDP was carried out by the Midwest Geological Sequestration Consortium (MGSC), one of seven USDOE NETL RCSPs that were formed to evaluate the safety and effectiveness of geological storage of CO 2 as a mitigation tool to address global climate change. The MGSC was formed and led by the Illinois, Indiana, and Kentucky geological surveys of the Illinois Basin. The Illinois State Geological Survey (ISGS) at the University of Illinois was the principal investigator for and managed the IBDP, with the Indiana Geological Survey (IGS) (now Indiana Geological and Water Survey) and the Kentucky Geological Survey (KGS) as key partners.

54 ENVIRONMENTAL SCIENCES↗

Leakage Risk Assessment of CO 2 Transportation by Pipeline at the Illinois Basin Decatur Project

The Illinois Basin Decatur Project (IBDP) is designed to confirm the ability of the Mt. Simon Sandstone, a major regional saline-water-bearing formation in the Illinois Basin, to store 1 million tons of carbon dioxide (CO 2 ) injected over a period of three years. The CO2 will be provided by Archer Daniels Midland (ADM) from its Decatur, Illinois, ethanol plant. In order to transport CO2 from the capture facility to the injection well (also located within the ADM plant boundaries), a high-pressure pipeline of length 3,200 ft (975 m) has been constructed, running above the ground surface within the ADM plant footprint. We have qualitatively evaluated risks associated with possible pipeline failure scenarios that lead to discharge of CO 2 within the real world environment of the ADM plant in which there are often workers and visitors in the vicinity of the pipeline.

54 ENVIRONMENTAL SCIENCES↗

Application of emerging monitoring techniques at the Illinois Basin – Decatur Project

The Illinois Basin – Decatur Project is a large-scale carbon capture and storage demonstration project located in Decatur, Illinois, USA. In this project, one million metric tons of carbon dioxide (CO 2 ) was captured from an ethanol production facility and successfully injected into a deep saline reservoir over a period of three years. The scale of this project presented an opportunity to explore emerging technologies for effective long-term monitoring of the carbon capture and storage site. This research documents the application of three emerging monitoring techniques: (1) a prototype “open-path” sensor, a method of continuously monitoring atmospheric CO 2 by applying tunable diode laser absorption spectroscopy to provide a warning system for personnel safety along pipelines and at wellheads; (2) the Greenhouse Gas Laser Imaging Tomography Experiment (GreenLITE), an automated system for measuring two-dimensional spatial distribution of atmospheric CO 2 concentrations; and (3) periodic aerial imagery, a method of documenting surface-vegetation dynamics to detect vegetative responses to CO 2 leaks. The objective of this work was to assess the advantages and limitations of these monitoring techniques and quantify their reliability over an extended deployment at an active industrial site. These results will aid in determining viability of long-term monitoring on a commercial scale.

42 ENGINEERING↗