Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ice Microphysical Processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A Polarimetric Radar Analysis of Ice Microphysical Processes in Melting Layers of Winter Storms Using S-Band Quasi-Vertical Profiles

Quasi-vertical profiles (QVPs) obtained from a database of U.S. WSR-88D data are used to document polarimetric characteristics of the melting layer (ML) in cold-season storms with high vertical resolution and accuracy. A polarimetric technique to define the top and bottom of the ML is first introduced. Using the QVPs, statistical relationships are developed to gain insight into the evolution of microphysical processes above, within, and below the ML, leading to a statistical polarimetric model of the ML that reveals characteristics that reflectivity data alone are not able to provide, particularly in regions of weak reflectivity factor at horizontal polarization Z H . QVP ML statistics are examined for two regimes in the ML data: Z H ≥ 20 dB Z and Z H < 20 dB Z . Regions of Z H ≥ 20 dB Z indicate locations of MLs collocated with enhanced differential reflectivity Z DR and reduced copolar correlation coefficient ρ hv , while for Z H < 20 dB Z a well-defined ML is difficult to discern using Z H alone. Evidence of large Z DR up to 4 dB, backscatter differential phase δ up to 8°, and low ρ hv down to 0.80 associated with lower Z H (from -10 to 20 dB Z ) in the ML is observed when pristine, nonaggregated ice falls through it. Positive correlation is documented between maximum specific differential phase K DP and maximum Z H in the ML; these are the first QVP observations of K DP in MLs documented at S band. Negative correlation occurs between minimum ρ hv in the ML and ML depth and between minimum ρ hv in the ML and the corresponding enhancement of Z H (Δ Z H = Z H max - Z H rain ).

Meteorology & Atmospheric Sciences↗

Sensitivity of Arctic Clouds to Ice Microphysical Processes in the NorESM2 Climate Model

Abstract Ice formation remains one of the most poorly represented microphysical processes in climate models. While primary ice production (PIP) parameterizations are known to have a large influence on the modeled cloud properties, the representation of secondary ice production (SIP) is incomplete and its corresponding impact is therefore largely unquantified. Furthermore, ice aggregation is another important process for the total cloud ice budget, which also remains largely unconstrained. In this study, we examine the impact of PIP, SIP, and ice aggregation on Arctic clouds, using the Norwegian Earth System Model, version 2 (NorESM2). Simulations with both prognostic and diagnostic PIP show that heterogeneous freezing alone cannot reproduce the observed cloud ice content. The implementation of missing SIP mechanisms (collisional breakup, drop shattering, and sublimation breakup) in NorESM2 improves the modeled ice properties, while improvements in liquid content occur only in simulations with prognostic PIP. However, results are sensitive to the description of collisional breakup. This mechanism, which dominates SIP in the examined conditions, is very sensitive to the treatment of the sublimation correction factor, a poorly constrained parameter that is included in the utilized parameterization. Finally, variations in ice aggregation treatment can also significantly impact cloud properties, mainly through their impact on collisional breakup efficiency. Overall, enhancement in ice production through the addition of SIP mechanisms and the reduction in ice aggregation (in line with radar observations of shallow Arctic clouds) result in enhanced cloud cover and decreased TOA radiation biases, compared to satellite measurements, especially during the cold months. Significance Statement Arctic clouds remain a large source of uncertainty in projections of the future climate due to the poor representation of the microphysical processes that govern their life cycle. Ice formation is among the least understood processes. While it is widely recognized that better constraints on primary ice production (PIP) are needed to improve existing parameterizations, we show that secondary ice production (SIP) and ice aggregation can have also a significant impact on ice number concentrations. Constraining ice formation through the addition of missing SIP mechanisms and reducing ice aggregation can improve the representation of the cloud macrophysical properties and enhance total cloud cover in the Arctic region, which in turn contributes to decreased TOA radiation biases in the cold months.

Meteorology & Atmospheric Sciences↗

Improving parameterization of ice microphysical processes in Arctic clouds using a synergistic modeling and observational approach (Final Report)

The primary goals of the project were to: 1) Improve the fundamental quantitative models of ice growth processes using ARM radar observations. 2) Better understand the growth of ice particle populations through vapor deposition, riming, and aggregation in Arctic clouds using a new particle-property microphysical model. 3) Robustly estimate and constrain key unknown model parameters using ARM radar observations combined with the particle-property model to develop an improved parameterization of ice growth processes for traditional bulk parameterizations used in cloud and climate models.

58 GEOSCIENCES↗

Improving GCM Predictability of Mixed-Phase Clouds and Aerosol Interactions at High Latitudes with ARM Observations

The overachieving goal of this project is to improve the predictability of mixed-phase clouds and aerosol interactions in the Community Atmosphere Model version 6 (CAM6) through comparison with the ARM observations. There are three main objectives of the proposed study: (1) Improve the representation of ice microphysical processes in mixed-phase clouds; (2) Test the performance of ice microphysics in CESM-CAM6 with the ARM observations in northern and southern high latitudes; and (3) Examine mixed-phase cloud microphysics-aerosol-turbulence-radiation interactions in CESM-CAM6. In this project, we have (1) Improved the representation of ice microphysical processes in mixed-phase clouds in CESM-CAM6 by implementing the marine organic aerosol (MOA) and treating the ice nucleating particles (INPs) from MOA and its impacts on mixed-phase clouds. We improved the treatment of ice depositional growth through the Wegener–Bergeron–Findeisen (WBF) process by considering the subgrid heterogeneous distributions between liquid droplets and ice crystals in mixed-phase clouds; (2) Tested the performance of ice microphysics in CESM-CAM6 with the ARM observations at high latitudes. We compared the simulated INP concentrations with the ARM observations, e.g., from M-PACE, ISDAC, INPOP, and other data (Mace Head, Zeppelin, CAPRICORN). We examined the impact of improved WBF treatment on model simulated Arctic mixed-phase clouds observed in the M-PACE field campaign. Seasonal variations of modeled mixed-phase cloud properties (LWO, IWP) are compared with the ground-based remote sensing retrievals at the ARM’s NSA $Utqia\dot{g}vik$ site; and (3) Examined mixed-phase cloud microphysics-aerosol-dynamics-radiation interactions in CESM-CAM6 that include the impacts of MOA INPs, and impacts of different model parameterizations (CLUBB versus UW turbulence & shallow convection schemes, MG2 versus MG1) on high-latitude mixed-phase cloud properties. Aerosol indirect effects of MOA through the liquid phase (droplet activation) and ice phase processes (e.g., the glaciation indirect effect) were investigated.

54 ENVIRONMENTAL SCIENCES↗

Improving Predictability of Mixed-Phase Clouds and Aerosol Interactions in the Community Earth System Model (CESM) with ARM Measurements

The objective of this project is to improve the simulation and predictability of mixed-phase clouds and aerosol interactions in the Community Earth System Model (CESM) through comparisons with the DOE ARM observations. There are four major goals of the proposed study: (1) Improve the representation of ice microphysical processes in mixed-phase clouds; (2) Develop a long-term multi-sensor mixed-phase cloud dataset; (3) Test the performance of improved ice microphysics in CESM-CAM5 with the ARM data; and (4) Examine mixed-phase cloud microphysics-aerosol-dynamics-radiation interactions in CESM-CAM5. In this project, we have (1) Improved the representation of ice microphysical processes in mixed-phase clouds that include ice nucleation, ice depositional growth through the Wegener–Bergeron–Findeisen (WBF) process, feedbacks between cloud microphysics, dynamics and radiation, and provides links to aerosol properties in the Community Earth System Model (CESM)-Community Atmosphere Model version 5 (CAM5); (2) Developed a long-term multi-sensor mixed-phase cloud dataset. The mixed-phase cloud retrieval algorithms are improved by refining the phase determinations and ice number concentration retrievals. A multi-year mixed-phase cloud observation dataset (1999-2004; October 2013-February 2017) is regenerated at the ARM Barrow site with the improved algorithms. The dataset has been used in the global model evaluation to improve the model parameterizations; (3) Tested the performance of improved ice microphysics in CESM-CAM5 with the ARM data. CESM-CAM5 is run in the DOE Cloud-Associated Parameterizations Testbed (CAPT) and in the single-column model (SCM) mode to facilitate comparison with ARM observations. Multi-year CAPT simulations of seasonal variations of cloud microphysical properties, cloud liquid water path (LWP) and ice water path (IWP), cloud longwave and shortwave forcings, cloud occurrence frequency are evaluated against the ARM multi-sensor mixed-phase cloud retrievals; and (4) Examined mixed-phase cloud microphysics-aerosol-dynamics-radiation interactions in CESM-CAM5 that include the impacts of different ice nucleation mechanisms, sensitivity to dust IN concentration, treatment of the WBF process on mixed-phase cloud properties. Aerosol effect on mixed-phase clouds through the liquid phase (droplet activation) and ice phase processes (e.g., the glaciation indirect effect) is investigated.

54 ENVIRONMENTAL SCIENCES↗

Improving GCM Predictability of Mixed-Phase Clouds and Aerosol Interactions at High Latitudes with ARM Observations

The goal of this project is to improve the predictability of mixed-phase clouds and aerosol interactions in the Community Atmosphere Model version 6 (CAM6) through comparison with the ARM observations. There are three main objectives of the proposed study: (1) Improve the representation of ice microphysical processes in mixed-phase clouds; (2) Test the performance of ice microphysics in CESM-CAM6 with the ARM observations in northern and southern high latitudes; and (3) Examine mixed-phase cloud microphysics-aerosol-turbulence-radiation interactions in CESM-CAM6. In this project, we have (1) Improved the representation of ice microphysical processes in mixed-phase clouds in CESM-CAM6 by implementing the marine organic aerosol (MOA) and treating the ice nucleating particles (INPs) from MOA and its impacts on mixed-phase clouds. We made a first attempt to represent different secondary ice production (SIP) mechanisms in a GCM (CESM2-CAM6). We found that misrepresentation of these ice formation processes in global climate models (GCMs) leads to too weak negative cloud feedback over the Southern Ocean (SO) and too high climate sensitivity in the models. In addition to ice formation processes, we improved the treatment of ice depositional growth through the Wegener–Bergeron–Findeisen (WBF) process by considering the subgrid heterogeneous distributions between liquid droplets and ice crystals in mixed-phase clouds; (2) Tested the performance of our improved representations of ice microphysics with the ARM observations at high latitudes.

54 ENVIRONMENTAL SCIENCES↗

Numerical Errors in Ice Microphysics Parameterizations and their Effects on Simulated Regional Climate

The major characteristics of ice microphysics in Weather Research and Forecasting (WRF) Double-Moment 6-class (WDM6) bulk-type cloud microphysics originate from the diagnosed ice number concentration, which is a function of the cloud-ice mixing ratio. In this study, we correct numerical errors in ice microphysics processes of the WDM6, in which the cloud-ice shape is assumed as single bullets and examine the impact on regional climate simulations. Here, by rederiving the relationships between cloud microphysics characteristics, including the one linking the cloud-ice mixing ratio and number concentration, we remove numerical errors intrinsic to the description of cloud-ice characteristics in the original WDM6 microphysics scheme. The revised WDM6 is tested using a WRF framework for regional climate simulations over the East Asian region. We find that our correction to the WDM6 improves the model’s performance in capturing the observed distribution of the monsoon rain band. A reduction in cloud ice is significant in the revised WDM6, which strengthens the Western North Pacific High. By conducting the additional sensitivity experiment in which the characteristics of cloud-ice shape are revised as the one for the column type, our study also finds out that the impacts of the existing numerical errors on the simulated monsoon is as large as the ones of the changes in cloud-ice shape.

54 ENVIRONMENTAL SCIENCES↗

A Robust Multi-Scale Modeling System for the Study of Cloud and Precipitation Processes

During the past decade, numerical weather and global non-hydrostatic models have started using more complex microphysical schemes originally developed for high resolution cloud resolving models (CRMs) with 1-2 km or less horizontal resolutions. These microphysical schemes affect the dynamic through the release of latent heat (buoyancy loading and pressure gradient) the radiation through the cloud coverage (vertical distribution of cloud species), and surface processes through rainfall (both amount and intensity). Recently, several major improvements of ice microphysical processes (or schemes) have been developed for cloud-resolving model (Goddard Cumulus Ensemble, GCE, model) and regional scale (Weather Research and Forecast, WRF) model. These improvements include an improved 3-ICE (cloud ice, snow and graupel) scheme (Lang et al. 2010); a 4-ICE (cloud ice, snow, graupel and hail) scheme and a spectral bin microphysics scheme and two different two-moment microphysics schemes. The performance of these schemes has been evaluated by using observational data from TRMM and other major field campaigns. In this talk, we will present the high-resolution (1 km) GeE and WRF model simulations and compared the simulated model results with observation from recent field campaigns [i.e., midlatitude continental spring season (MC3E; 2010), high latitude cold-season (C3VP, 2007; GCPEx, 2012), and tropical oceanic (TWP-ICE, 2006)].

Tao, Wei-Kuo↗

Radar-Based Bayesian Estimation of Ice Crystal Growth Parameters within a Microphysical Model

The potential for polarimetric Doppler radar measurements to improve predictions of ice microphysical processes within an idealized model–observational framework is examined. In an effort to more rigorously constrain ice growth processes (e.g., vapor deposition) with observations of natural clouds, a novel framework is developed to compare simulated and observed radar measurements, coupling a bulk adaptive-habit model of vapor growth to a polarimetric radar forward model. Bayesian inference on key microphysical model parameters is then used, via a Markov chain Monte Carlo sampler, to estimate the probability distribution of the model parameters. The statistical formalism of this method allows for robust estimates of the optimal parameter values, along with (non-Gaussian) estimates of their uncertainty. To demonstrate this framework, observations from Department of Energy radars in the Arctic during a case of pristine ice precipitation are used to constrain vapor deposition parameters in the adaptive habit model. The resulting parameter probability distributions provide physically plausible changes in ice particle density and aspect ratio during growth. A lack of direct constraint on the number concentration produces a range of possible mean particle sizes, with the mean size inversely correlated to number concentration. Consistency is found between the estimated inherent growth ratio and independent laboratory measurements, increasing confidence in the parameter PDFs and demonstrating the effectiveness of the radar measurements in constraining the parameters. Furthermore, the combined Doppler and polarimetric observations produce the highest-confidence estimates of the parameter PDFs, with the Doppler measurements providing a stronger constraint for this case.

54 ENVIRONMENTAL SCIENCES↗

Radar-Based Bayesian Estimation of Ice Crystal Growth Parameters within a Microphysical Model

The potential for polarimetric Doppler radar measurements to improve predictions of ice microphysical processes within an idealized model–observational framework is examined. In an effort to more rigorously constrain ice growth processes (e.g., vapor deposition) with observations of natural clouds, a novel framework is developed to compare simulated and observed radar measurements, coupling a bulk adaptive-habit model of vapor growth to a polarimetric radar forward model. Bayesian inference on key microphysical model parameters is then used, via a Markov chain Monte Carlo sampler, to estimate the probability distribution of the model parameters. The statistical formalism of this method allows for robust estimates of the optimal parameter values, along with (non-Gaussian) estimates of their uncertainty. To demonstrate this framework, observations from Department of Energy radars in the Arctic during a case of pristine ice precipitation are used to constrain vapor deposition parameters in the adaptive habit model. The resulting parameter probability distributions provide physically plausible changes in ice particle density and aspect ratio during growth. A lack of direct constraint on the number concentration produces a range of possible mean particle sizes, with the mean size inversely correlated to number concentration. Consistency is found between the estimated inherent growth ratio and independent laboratory measurements, increasing confidence in the parameter PDFs and demonstrating the effectiveness of the radar measurements in constraining the parameters. The combined Doppler and polarimetric observations produce the highest-confidence estimates of the parameter PDFs, with the Doppler measurements providing a stronger constraint for this case.

Robert S. Schrom↗

Toward Better Understanding of Microphysical Processes and Resulting Precipitation Physics: A Merger Of Observations and Cloud Models (Final Report)

A large database of global disdrometer observations and a diverse set of simulations from the Regional Atmospheric Modeling System (RAMS) were compared using principal component analysis (PCA) in order to better understand warm and ice-based precipitation processes. The analysis demonstrated that six distinct precipitation groups (PGs) with common characteristics were revealed in both the observations and model simulations. These PGs were defined by similar co-variability of rain parameters. However, the model showed large concentrations of drops with a given size compared to the observations. Detailed investigations determined the parameterization of drop breakup was forcing the drops to an equilibrium size with a stronger constraint than was indicated by the observations. A series of sensitivity studies permutating the rain shape parameter in the RAMS 2-moment bulk scheme demonstrated how the assumed shape of the rain distribution influences the microphysics as well as precipitation characteristics. Results were compared to the same simulations performed with a bin microphysics scheme where the rain shape parameter is freely evolving. In the bin scheme, a wide range of shape parameters were found, with horizontal and vertical variability, in addition to being a function of storm lifetime. The results of this study highlight the limitations of a fixed assumed rain distribution in 2-moment microphysics schemes. Model simulations were used to probe the microphysical origins of the six PGs. Rain budgets from a supercell case showed that several of the groups hypothesized to be associated with strong ice microphysical processes had significant contributions from melting hail, but the complexity of ice and warm-rain processes in the supercell precluded definitive determination of microphysical origins for many of the PGs. A case study from the Mid-latitude Continental Convection and Clouds Experiment (MC3E) compared the model PGs to disdrometer observations, and demonstrated the spatial and temporal variability of the PGs which is not possible from disdrometer point measurements alone. The analyses performed during this project demonstrated how statistical analysis can provide a robust method for comparing model simulations and observations, which ultimately resulted identification of limitations in some current microphysics parameterizations as well as insights into precipitation variability which ultimately benefits both observations and modeling efforts.

54 ENVIRONMENTAL SCIENCES↗

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud-Resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution on the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes, and with surface processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulate squall lines that developed in the western Pacific, South China Sea, eastern Atlantic, South America and central U.S. For the cloud ensemble, the GCE model was integrated for several days in order to have good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolution will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1- to 5-kilometers) and vertical resolutions (from 20- to 200-meters in the lower troposphere to 200- to 500-m in the middle and upper troposphere). Sensitivity tests using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The PBL and diurnal variation of precipitation processes will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kao↗

A radar view of ice microphysics and turbulence in Arctic cloud systems

Ice microphysical processes are inherently complex because of their sensitivity to temperature and humidity, the diversity of ice crystal habits, and their interaction with supercooled liquid water (SCL) and turbulence. Long-term surface-based radar observations have been systematically used to unravel the different processes that affect ice particle growth. In this study, we present a statistical analysis of 6.5 years of Ka-band radar observations in Arctic cloud systems, combined with thermodynamic profiles derived from radiosonde measurements. For the first time, ice particle growth and sublimation – diagnosed from vertical gradients of radar reflectivity and mean Doppler velocity – are systematically mapped across a broad range of temperature and moisture conditions. These vertical gradients correspond closely to saturation levels relative to ice and exhibit a strong temperature dependence in supersaturated regions. Notably, distinct signatures near −15 °C are indicative of dendritic growth. Turbulence, quantified via the eddy dissipation rate (EDR), is most frequently observed in regions containing SCL. The co-occurrence of SCL and elevated turbulence results in significantly enhanced ice particle growth compared to conditions in which either is present alone. This work provides new observational constraints that are critical for improving the representation of ice microphysics in atmospheric models.

54 ENVIRONMENTAL SCIENCES↗

A Study of the Response of Deep Tropical Clouds to Mesoscale Processes: Sensitivities to Microphysics, Radiation, and Surface Fluxes - Part 2

The Goddard Cumulus Ensemble (GCE) model is used to examine the sensitivities of surface fluxes, explicit radiation, and ice microphysical processes on multi-day simulations of deep tropical convection over the Tropical Ocean Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA COARE). The simulations incorporate large-scale advective temperature and moisture forcing, as well as large-scale momentum, that are updated every time step on a periodic lateral boundary grid. This study shows that when surface fluxes are eliminated, the mean atmosphere is much cooler and drier, convection and CAPE are much weaker, precipitation is less, and cloud coverage in stratiform regions much greater. Surface fluxes using the TOGA COARE flux algorithm are weaker than with the aerodynamic formulation, but closer to the observed fluxes. In addition, similar trends noted above for the case without surface fluxes are produced for the TOGA flux case, albeit to a much lesser extent. The elimination of explicit shortwave and longwave radiation is found to have only minimal effects on the mean thermodynamics, convection, and precipitation. However explicit radiation does have a significant impact on cloud temperatures and structure above 200 mb and on the overall mean vertical circulation. The removal of ice processes produces major changes in the structure of the cloud. Much of the liquid water is transported aloft and into anvils above the melting layer (600 mb), leaving narrow, but intense bands of rainfall in convective regions. The elimination of melting processes leads to greater hydrometeor mass below the melting layer, and produces a much warmer and moister boundary layer, leading to a greater mean CAPE. Finally, the elimination of the graupel species has only a small impact on mean total precipitation, thermodynamics, and dynamics of the simulation, but does produce much greater snow mass just above the melting layer. Some of these results differ from previous CRM studies of tropical systems, which is likely due to the type of simulated system, total time integration, and model setup.

Johnson, Daniel↗

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud Resolving Model

The Goddard Cumulus Ensemble (GCE) model examines the impact of various microphysical schemes, and vertical and horizontal resolution in the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing rations of all water phases (vapor, liquid and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes and with surface processes. For idealized hurricanes, an axisymmetric version of the GCE model was developed and used to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was use to simulate squall lines that developed in the western Pacific, South China Sea, eastern Atlantic, South America and central U.S. FOr the cloud ensemble, the GCE model was integrated for several days in order to have a good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolutio will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1-to 5-km) and vertical resolutions (from 20- to 200-m in the lower troposphere to 200- to 500m in the middle and upper troposphere). Sensitivity test using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The thermodynamic and water budget associated with various types of precipitation systems will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kuo↗

Sensitivity of Precipitation Processes of Microphysics and Resolution in a Cloud-Resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution ion the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble f clouds. The model variables include horizontal and vertical velocities, potential temperatures, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes, and with surface processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulated squall lines that developed in the western Pacific, eastern Atlantic and central US. For the cloud ensemble, the GCE model was integrated for several days in order to have good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolution will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1- to 5-km) and vertical resolutions (from 20- to 200-m in the lower troposphere to 200- to 500-m in the middle and upper troposphere). Sensitivity tests using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The thermodynamic and water budget associated with various types of precipitation systems will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kuo↗