Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON SILICATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A shock-induced phase change in iron-silicate garnet.

Hugoniot measurements on iron-silicate garnet demonstrate that above a shock pressure of about 205 kbar transition to a high-pressure phase(s), having an apparent zero-pressure density and bulk modulus of 4.44 g/cu cm and 3.3 Mbar, occurs. Crystal chemical systematics and Debye-Scherrer X-ray patterns of a recovered phase(s), which may be the shock-induced high-pressure form, suggest possible formation of a phase with a density of 4.48/cu cm. Occurrence of such a polymorph of garnet in the mantle would give rise to an increase in density and seismic velocity below 600 km in the earth.

Ahrens, T. J.↗

Optical Properties of Iron Silicates in the Infrared to Millimeter as a Function of Wavelength and Temperature

The Optical Properties of Astronomical Silicates with Infrared Techniques (OPASI-T) program utilizes multiple instruments to provide spectral data over a wide range of temperature and wavelengths. Experimental methods include Vector Network Analyzer (VNA) and Fourier Transform Spectroscopy (FTS) transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5-300 K, across the infrared and millimeter portion of the spectrum (from 2.5-10,000 μm or 4,000-1 cm(exp −1).

Optical↗

Optical Properties of Iron Silicates in the Infrared to Millimeter as a Function of Wavelength and Temperature

The Optical Properties of Astronomical Silicates with Infrared Techniques program utilizes multiple instruments to provide spectral data over a wide range of temperatures and wavelengths. Experimental methods include Vector Network Analyzer and Fourier transform spectroscopy transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5 to 300 K, across the infrared and millimeter portion of the spectrum (from 2.5 to 10,000/micron or 4000 to 1/cm).

Dust↗

Optical Properties of Iron Silicates in the Infrared to Millimeter as a Function of Wavelength and Temperature

The Optical Properties of Astronomical Silicates with Infrared Techniques (OPASI-T) program utilizes multiple instruments to provide spectral data over a wide range of temperature and wavelengths. Experimental methods include Vector Network Analyzer (VNA) and Fourier Transform Spectroscopy (FTS) transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5-300 K, across the infrared and millimeter portion of the spectrum (from 2.5-10,000 m or 4,000-1 cm(exp−1).

Methods: laboratory↗

Equilibria bearing on the behavior of titanate phases during crystallization of iron silicate melts under strongly reducing conditions

Titanate phase relations at liquidus temperatures are determined for the CaAl2Si2O8-Fe2TiO4-FeTi2O5 system in contact with metallic iron by reflected- and transmitted-light microscopy, electron microprobe, and X-ray diffraction analyses. Results of critical equilibration runs are presented, various primary phase areas and liquidus isotherms are illustrated, and the geometry of the system is described. Three piercing points are determined, and it is noted that the compositional interrelations among coexisting crystalline and liquid phases as well as the sequence of the various titanate phases are indicative of the significant effects of the various cations on the relative stability of these phases. It is found that Al2O3 exerts a strong stabilizing effect on the phase assemblage of ulvospinel plus ferropseudobrookite relative to ilemite.

Lipin, B. R.↗

Shock wave compression of iron-silicate garnet.

Shock wave compression data to over 650 kb are presented for single-crystal almandine garnet. The data indicate the initiation of a phase transformation near 200 kb. Total transition to the high-pressure polymorph occurs at approximately 300 kb. The elastic properties of the high-pressure phase are calculated from the metastable Hugoniot data by using the linear shock velocity-particle velocity relationships. The overall results obtained strongly suggest that upper mantle minerals are likely to occur in the ilmenite structure over a substantial part of the lower mantle.

Graham, E. K.↗

Flow behavior of ten iron-containing silicate compositions

The viscosity of ten iron-containing silicates has been measured over the temperature range 400 to 650 C. The compositions contain trace amounts up to 30 wt. pct. or 20 mole. pct. Fe3O4 from 10 to 20 wt. pct. or 10 to 20 mole. pct. Na2O and the remainder is SiO2. Samples were melted in air to form oxidized samples, in forming gas (95% N2-5% H2) to form mildly reduced samples, and in forming gas with carbon in the batch to form strongly reduced samples. In general, the viscosity decreased with increasing mole. pct. Na2O and decreasing mole. pct. SiO2 for a given temperature. In samples with increasing mole. pct. FeO(x) the difference in the viscosity between the oxidized sample and the reduced sample grew in magnitude at a given temperature. In all of the compositions, the log or viscosity, vs reciprocal-of-temperature relation shows curvature with an apparent activation energy between 90 and 100 kcal/mole.

Klein, L. C.↗

A Simple Mechanism for Fractionating Oxygen Isotopes in the Solar Nebula

Lightning in the Solar Nebula is caused by the tribo-electric charging of dust grains carried by massive turbulent flows and driven by the accretion energy in the disk: it has long been one agent assumed responsible for the formation of chondrules. The degree to which charge separation can occur is dependent upon a number of factors, including the concentration of radioactive sources and the total level of ionization in the nebula, and these factors determine the maximum energy likely to be released by a single bolt. While chondrule formation requires a massive discharge, even a small lightning bolt can vaporize grains in the ionized discharge channel. Experimental studies have shown that silica, iron silicate and iron oxide grains formed from a high voltage discharge in hydrogen rich gas containing some oxygen produces solids that are enriched in O-17 and O-18 relative to the composition of the starting gas. Vaporization of silicates produces SiO, metal and free oxygen atoms in each discharge and these species will immediately begin to recondense from the hot plasma. Freshly condensed grains are incrementally enriched in heavy oxygen while the gas is enriched in O-16. Repeated evaporation and condensation of silicates in continuously occurring lightning discharges will monotonically increase the fractionation of oxygen isotopes between the O-17 and O-18 rich dust and the O-16 rich gas. The first mass independently fractionated refractory oxide particles were produced in the lab following the condensation of a flowing gas mixture containing variable amounts of hydrogen, silane, pentacarbonyl iron and oxygen that passed through a high voltage discharge powered by a Tesla coil. While the exact chemical pathway is still uncertain, the most probable reaction mechanisms involve oxidation of the growing refractory clusters by O3, OH or O atoms. This model has some interesting consequences for chemical processes in the early solar nebula. Chemical fractionation of recondensed dust evaporated via lightning discharges should be strongly time dependent. At earlier times, the accretion rate is maximal, thus driving strong turbulence, energetic grain-grain collisions, tribo-electric charging and charge separation, leading to frequent, powerful lightning discharges. As the accretion rate diminishes, turbulence decreases and lightning discharges will become both less powerful and less frequent, thus decreasing the rate of dust-gas fractionation. The most rapid increase in the formation of O-16 poor dust will occur early in nebular history. Generation of fractionated dust should be distributed throughout the inner disk. Once condensed, grain dispersal would average out any significant isotopic anomalies within the inner disk.

Nuth, Joseph A., III↗

Viscous flow behavior of four iron-containing silicates with alumina, effects of composition and oxidation condition

The viscosity of a magma is an important parameter in connection with its effect on geologic processes such as melt segregation, magma vesiculation, and crystal fractionation. Though most models of geologic processes assume relatively low values for the magma viscosity less than 10,000 poise, it would be useful to have an empirical model for estimating viscosities when the process occurs during continuous cooling to a temperature region where the viscosity is expected to be very high. The considered work has been carried out to provide the experimental measurements of viscosity at low temperatures which would be used in formulating the empirical model. Ten iron-containing silicate compositions have been investigated by Klein et al. (1981), and four of these compositions have been selected for the present study with alumina. The study involves substitutions of Al2O3 for FeOx at Na2O/Al2O3 moles greater than one. For the four iron-containing silicate glasses with alumina, the viscosity at a given temperature is found to increase with increasing (Fe + Al).

Klein, L. C.↗