Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

PREDICTION OF THE SPECTROSCOPIC PARAMETERS OF NEW IRON COMPOUNDS: HYDRIDE OF IRON CYANIDE/ISOCYANIDE, HFeCN/HFeNC

Iron is the most abundant transition metal in space. Its abundance is similar to that of magnesium, and until today only, FeO and FeCN have been detected. However, magnesium-bearing compounds such as MgCN, MgNC, and HMgNC are found in IRC+10216. It seems that the hydrides of iron cyanide/isocyanide could be good candidates to be present in space. In the present work we carried out a characterization of the different minima on the quintet and triplet [C, Fe, H, N] potential energy surfaces, employing several theoretical approaches. The most stable isomers are predicted to be hydride of iron cyanide HFeCN, and isocyanide HFeNC, in their {sup 5}Δ states. Both isomers are found to be quasi-isoenergetics. The HFeNC isomer is predicted to lie about 0.5 kcal/mol below HFeCN. The barrier for the interconversion process is estimated to be around 6.0 kcal/mol, making this process unfeasible under low temperature conditions, such as those in the interstellar medium. Therefore, both HFeCN and HFeNC could be candidates for their detection. We report geometrical parameters, vibrational frequencies, and rotational constants that could help with their experimental characterization.

79 ASTRONOMY AND ASTROPHYSICS↗

Possible bicollinear nematic state with monoclinic lattice distortions in iron telluride compounds

Here, iron telluride (FeTe) is known to display bicollinear magnetic order at low temperatures together with a monoclinic lattice distortion. Because the bicollinear order can involve two different wave vectors (π/2,π/2) and (π/2,–π/2), symmetry considerations allow for the possible stabilization of a nematic state with short-range bicollinear order coupled to monoclinic lattice distortions at a T S higher than the temperature T N where long-range bicollinear order fully develops. As a concrete example, the three-orbital spin-fermion model for iron telluride is studied with an additional coupling ˜λ 12 between the monoclinic lattice strain and an orbital-nematic order parameter with B 2 g symmetry. Monte Carlo simulations show that with increasing ˜λ 12 the first-order transition characteristic of FeTe splits and bicollinear nematicity is stabilized in a (narrow) temperature range. In this new regime, the lattice is monoclinically distorted and short-range spin and orbital order breaks rotational invariance. A discussion of possible realizations of this exotic state is provided.

36 MATERIALS SCIENCE↗

Prediction of exotic magnetic states in the alkali-metal quasi-one-dimensional iron selenide compound Na 2 FeSe 2

The magnetic and electronic phase diagram of a model for the quasi-one-dimensional alkali-metal iron selenide compound Na 2 FeSe 2 is presented. The novelty of this material is that the valence of iron is Fe 2+ , contrary to most other iron-chain compounds with valence Fe 3+ . Using first-principles techniques, we developed a three-orbital tight-binding model that reproduces the ab initio band structure near the Fermi level. Including Hubbard and Hund couplings and studying the model via the density-matrix renormalization group and Lanczos methods, we constructed the ground-state phase diagram. A robust region where the block state ↑↑↓↓↑↑↓↓ is stabilized was unveiled. The analog state in iron ladders, employing 2×2 ferromagnetic blocks, is by now well established, but in chains a block magnetic order has not been observed yet in real materials. The phase diagram also contains a large region of canonical staggered spin order ↑↓↑↓↑↓↑ at very large Hubbard repulsion. At the block-to-staggered transition region, an exotic phase is stabilized with a mixture of both states: an inhomogeneous orbital-selective charge density wave with the exotic spin configuration ↑↑↓↑↓↓↑↓. Our predictions for Na 2 FeSe 2 may guide crystal growers and neutron-scattering experimentalists towards the realization of block states in one-dimensional iron selenide chain materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxidation in Ca/K-1144 iron-based superconductors polycrystalline compounds

Iron-based superconductors (IBSCs) are a class of material under investigation for the development of superconducting wires in the low-temperature-high magnetic fields power application. Among the various families of IBSCs, the 1144 CaKFe$_4$As$_4$ compound is a promising material able to achieve outstanding superconducting properties with a cheap and simple chemical composition. Oxidation, in these compounds, is considered an obstacle for high intergranular critical current density, J c,GB . A study devoted to the evaluation of oxidation phenomena and their effects on the superconducting properties is thus needed in order to fully understand the involved mechanisms. From the evaluation of polycrystalline samples obtained by a mechanochemically assisted synthesis route, a degradation of the critical temperature and critical currents has been observed concurrently with oxygen accumulation at grain boundaries in open porosities. However, the crystalline structure at an atomic level seems not affected, as well as intragranular superconducting properties assessed by means of calorimetric methods. These results suggest that loss of superconducting properties in Ca/K-1144 compounds following oxidation is significantly associated with the worsening of grain connectivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inelastic Neutron Scattering Study of a Nonmagnetic Collapsed Tetragonal Phase in Nonsuperconducting CaFe2As2: Evidence of the Impact of Spin Fluctuations on Superconductivity in the Iron-Arsenide Compounds

The relationship between antiferromagnetic spin fluctuations and superconductivity has become a central topic of research in studies of superconductivity in the iron pnictides. We present unambiguous evidence of the absence of magnetic fluctuations in the nonsuperconducting collapsed tetragonal phase of CaFe2As2 via inelastic neutron scattering time-of-flight data, which is consistent with the view that spin fluctuations are a necessary ingredient for unconventional superconductivity in the iron pnictides. We demonstrate that the collapsed tetragonal phase of CaFe2As2 is nonmagnetic, and discuss this result in light of recent reports of high-temperature superconductivity in the collapsed tetragonal phase of closely related compounds.

36 MATERIALS SCIENCE↗

Electronic spin transition in FeO 2 : Evidence for Fe(II) with peroxide O 2 2 –

The discovery of FeO 2 containing more oxygen than hematite (Fe 2 O 3 ), which was previously believed to be the most oxygen rich iron compound, has important implications for the study of deep lower mantle compositions. Compared to other iron compounds, there are limited reports on FeO 2 , making studies of its physical properties of great interest in fundamental condensed matter physics and geoscience. Even the oxidation state of Fe in FeO 2 is the subject of debate in theoretical works and there have not been reports from experimental electronic and magnetic properties measurements. Here, we report the pressure-induced spin state transition from synchrotron experiments and our computational results explain the underlying mechanism. Using density functional theory and dynamical mean field theory, we calculated spin states of Fe with volume and Hubbard interaction U change, which clearly demonstrate that Fe in FeO 2 consists of Fe(II) and peroxide O 2– 2 . In conclusion, our paper suggests that the localized nature of both Fe 3d orbitals and O 2 molecular orbitals should be correctly treated for unveiling the structural and electronic properties of FeO 2 .

74 ATOMIC AND MOLECULAR PHYSICS↗

Heteroleptic Four-Coordinate Tris(oxazolinyl)borato Iron(II) Compounds

The reaction of FeBr 2 and 1 equiv of thallium tris(4,4-dimethyl-2-oxazolinyl)phenylborate (TlTo M ) in THF provides To M FeBr ( 1 ), whereas FeBr 2 and 2 equiv of TlTo M react to give (To M ) 2 Fe ( 2 ). Two ν CN bands at 1604 and 1548 cm –1 suggested bidentate coordination of To M to iron in 2 . Homoleptic 2 and FeBr 2 react in THF overnight through an unusual ligand exchange process to give compound 1 , which is apparently the thermodynamic product. The salt metathesis reaction of 1 and KCH 2 Ph affords To M FeCH 2 Ph ( 3 ). The effective magnetic moments of compounds 1–3 range from 4.9 to 5.4 μ B , and these values are consistent with high-spin iron(II) (S = 2). A single 1 H NMR signal assigned to the methyl groups of the ToM ligand suggested tridentate coordination of the To M ligand to iron in 1 and 3 . X-ray crystallography studies of 1–3 establish their structure as four-coordinated tetrahedral iron complexes. To M FeBn and CO (1 atm) react to afford isolable To M Fe{C(=O)Bn}(CO) 2 ( 4 ) as a yellow solid. Complex 4 is diamagnetic (S = 0), and the three distinct methyl signals in the 1 H NMR spectrum are consistent with a six-coordinate, C s -symmetric species. This assignment is supported by its IR spectrum, which revealed intense bands at 2004 and 1935 cm –1 (symmetric and asymmetric ν CO ), at 1680 and 1662 cm –1 (acyl rotamers, ν CO ), and at 1593 and 1553 cm –1 (ν CN ) and is confirmed by a single-crystal X-ray diffraction study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antiferromagnetic Spin Correlations Between Corner-Shared [FeO 5 ] 7- and [FeO 6 ] 9- Units, in the Novel Iron-Based Compound: BaYFeO 4

A novel quaternary compound in the Ba–Y–Fe-O phase diagram was synthesized by solid-state reaction and its crystal structure was characterized using powder X-ray diffraction. The crystal structure of BaYFeO 4 consists of a unique arrangement of Fe 3+ magnetic ions, which is based on alternate corner-shared units of [FeO 5 ] 7– square pyramids and [FeO 6 ] 9– octahedra. This results in the formation of stairwise channels of FeO polyhedra along the b crystallographic axis. The structure is described in an orthorhombic crystal system in the space group Pnma with lattice parameters a = 13.14455(1) Å, b = 5.694960(5) Å, and c = 10.247630(9) Å. The temperature-dependent magnetic susceptibility data reveal two antiferromagnetic (AFM) transitions at 33 and 48 K. An upturn in the magnetic susceptibility data above these transitions is observed, which does not reach its maximum even at 390 K. The field-dependent magnetization data at both 2 and 300 K show a nearly linear dependence and do not exhibit significant hysteresis. Heat capacity measurements between 2 and 200 K reveal only a broad anomaly without any indication of long-range ordering. The latter data set is not in good agreement with the magnetic susceptibility data, which makes it difficult to exactly determine the magnetic ground state of BaYFeO 4 . Accordingly, a temperature-dependent neutron diffraction study is in order, which will enable resolving this issue. The theoretical study of the relative strengths of magnetic exchange interactions along various possible pathways, using extended Hückel spin dimer analysis, shows that only interactions between square pyramidal and octahedral centers are significant, and among them, the intrachannel correlations are stronger than interchannel interactions. This is the first physical property study in such a magnetic ion substructure.

Wrobel, Friederike↗

Synthesis of Xenon and Iron-Nickel Intermetallic Compounds at Earth’s Core Thermodynamic Conditions

In this study, using in situ synchrotron x-ray diffraction and Raman spectroscopy in concert with first principles calculations we demonstrate the synthesis of stable Xe(Fe ,Fe/Ni) 3 and XeNi 3 compounds at thermodynamic conditions representative of Earth’s core. Surprisingly, in the case of both the Xe-Fe and Xe-Ni systems Fe and Ni become highly electronegative and can act as oxidants. In conclusion, the results indicate the changing chemical properties of elements under extreme conditions by documenting that electropositive at ambient pressure elements could gain electrons and form anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Catastrophic Charge Density Wave in BaFe 2 Al 9

Charge density waves (CDWs) are modulations of the electron density and the atomic lattice that develop in some crystalline materials at low temperatures. We report an unusual example of a CDW in BaFe 2 Al 9 below 100 K. In contrast to the canonical CDW phase transition, temperature-dependent physical properties of single crystals reveal a first-order phase transition. This is accompanied by a discontinuous change in the size of the crystal lattice. In fact, this large strain has catastrophic consequences for the crystals causing them to physically shatter. Single-crystal X-ray diffraction reveals superlattice peaks in the low-temperature phase signaling the development of a CDW lattice modulation. No similar low-temperature transitions are observed in BaFe 2 Al 9 . Electronic structure calculations provide one hint to the different behavior of these two compounds; the d-orbital states in the Fe compound are not completely filled. Iron compounds are renowned for their magnetism, and partly filled d-states play a key role. Finally, it is therefore surprising that BaFe 2 Al 9 develops a structural modulation at low temperature instead of magnetic order.

36 MATERIALS SCIENCE↗

Forming iron nitride hard magnetic materials using chemical vapor deposition or liquid phase epitaxy

The disclosure describes techniques for forming hard magnetic materials including α″-Fe16N2 using chemical vapor deposition or liquid phase epitaxy and hard materials formed according to these techniques. A method comprises heating an iron source to form a vapor comprising an iron-containing compound; depositing iron from the vapor comprising the iron-containing compound and nitrogen from a vapor comprising a nitrogen-containing compound on a substrate to form a layer comprising iron and nitrogen; and annealing the layer comprising iron and nitrogen to form at least some crystals comprising α″-Fe16N2.

Wang, Jian-Ping↗

Pentamethylcyclopentadienyl Metalloradical Iron Complexes Containing Redox Noninnocent α-Diimine-Type Ligands: Synthesis, Molecular, and Electronic Structures

The synthesis and characterization of pentamethylcyclopentadienyl iron complexes bearing the redox non-innocent α-diimine (N,N'-dimesitylbutane-2,3-diimine, Mes DI) and α-iminopyridine (N-mesityl(pyridin-2-yl)ethanimine Mes PI) ligands were explored. One-pot reduction and complexation of the cyclopentadienyl ring was accomplished by treatment of (κ 2 -N,N')FeCl 2 (N,N'= Mes DI or Mes PI) pre-cursors with [C 5 Me 5 ]Li. The resulting iron compounds were characterized by paramagnetic 1 H NMR spectroscopy, magnetic susceptibility measurements, zero-field 57 Fe Mössbauer spectroscopy, low-temperature EPR spectroscopy, and cyclic voltammetry. The combined spectroscopic, structural and DFT computational data supported low-spin iron(III) compounds (S Fe = ½) with π-acidic, formally doubly-reduced chelating ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal growth, structural and magnetic characterization of NH{sub 4}MCl{sub 2}(HCOO), M=(Fe, Co, Ni)

An ambient-pressure solution route and an improved solvothermal synthetic method have been developed to produce polycrystalline powders and large single crystals of NH{sub 4}MCl{sub 2}(HCOO) (M=Fe, Co, Ni). The magnetic structure of the 1D linear chain compound NH{sub 4}FeCl{sub 2}(HCOO) has been determined by low-temperature neutron powder diffraction, revealing ferromagnetic intra-chain interactions and antiferromagnetic inter-chain interactions. The newly-reported Co and Ni analogs are isostructural with NH{sub 4}FeCl{sub 2}(HCOO), but there are significant differences in the magnetic properties of each compound; the Ni analog behaves similarly to the Fe compound but with stronger magnetic coupling, exhibiting antiferromagnetic ordering (T{sub N}=8.5 K) and a broad metamagnetic transition between 2 and 5 T, while the Co analog does not order magnetically above 2 K, despite strong antiferromagnetic nearest-neighbor interactions. - Graphical abstract: Large single crystals of NH{sub 4}MCl{sub 2}(HCOO) (M=Fe, Co, Ni), which adopt a 1D zig-zag chain structure, can be grown via a solvothermal method. Neutron diffraction experiments revealed that the magnetic structure of the iron compound exhibits ferromagnetic intra-chain coupling and antiferromagnetic inter-chain coupling. - Highlights: • Large crystals of NH{sub 4}MCl{sub 2}(HCOO) (M=Fe, Co, Ni) have been grown solvothermally. • The magnetic structure of M=Fe was solved by low-temperature neutron diffraction. • NH{sub 4}FeCl{sub 2}(HCOO) exhibits FM intra-chain and AFM inter-chain interactions. • NH{sub 4}CoCl{sub 2}(HCOO) exhibits no 3D magnetic ordering above 2 K. • NH{sub 4}NiCl{sub 2}(HCOO) exhibits AFM ordering (T{sub N}=8.5 K) and FM intra-chain interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas retention and release from Hanford Site sludge waste tanks - 15491

Radioactive wastes from nuclear fuel processing are stored in large underground storage tanks at the Hanford Site. Solid wastes can be divided into salt-cake (mostly precipitated soluble sodium nitrate and nitrite salts with some interstitial liquid consisting of concentrated salt solutions) and sludge (mostly low solubility aluminum and iron compounds with relatively dilute interstitial liquid). Waste generates hydrogen through the radiolysis of water and organic compounds, radio-thermolytic decomposition of organic compounds, and corrosion of a tank's carbon steel walls. Nonflammable gases, such as nitrous oxide and nitrogen, are also produced. Additional flammable gases (e.g., ammonia and methane) are generated by chemical reactions between various degradation products of organic chemicals present in the tanks. Six double-shell tanks (DSTs) containing salt-cake wastes began showing signs of gas accumulation and buoyant instability in the form of periodic waste level drops in the 1980's. Studies in the 1990's indicated that gas would accumulate in the settled solids layer until its bulk density was lower than the supernatant liquid. The resultant gas release caused by this instability was termed a Buoyant Displacement Gas Release Event (BDGRE). Criteria were developed to prevent forming additional waste tanks that exhibited BDGREs. Significant gas accumulation and BDGREs were never observed in tanks containing predominantly sludge wastes. Literature reviews, data from Hanford Site waste tanks, and experiments with waste simulants have led to new conclusions on gas retention and release in sludge waste. The data show similar overall behavior where initially the settled solids volume increases as gas bubbles form. Gas fraction in the settled solids increases to a peak concentration after which additional generated gas escapes through connected cracks and there is a balance between gas generation and gas release with little change in gas fraction. Experiments showed that this behavior does not change as sludge waste depth increases. Sufficient data now exist to differentiate between gas retention and release behavior in Hanford Site sludge waste tanks and salt-cake waste tanks. The salt-cake criteria do not need to be applied to sludge waste tanks that exhibit certain gas retention and release behavior. Criteria for waste characteristics and process behavior have been defined that identify specific wastes and tanks that, based on previous operating experience, will have low gas retention and will not exhibit large, spontaneous releases. The first criterion defines what waste is considered sludge and what waste is considered salt-cake. If the mass ratio of soluble to insoluble constituents is below 2.5, then the waste is sludge. The second criterion is a density difference criterion that prevents tanks being operated in a region where sludge buoyancy might occur. For large gas releases to occur, the settled solids must accumulate sufficient gas to become less dense than the overlying supernatant (i.e., the settled solids would become buoyant). Based on previous operating experience, the ratio of liquid density to degassed settled solids bulk density (ρl/ρB) should be maintained at ≤ 0.84. This ensures that retained gas content in the sludge would need to exceed 16% by volume for the settled solids to become buoyant in the overlying supernatant. Tank waste that satisfies the mass ratio criterion, the liquid to bulk solids density criterion, and has process data supporting typical Hanford waste sludge behavior does not pose a significant risk for a large spontaneous gas release event. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗