Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IODINE 135”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A = 135

The evaluated experimental data are presented for 17 known nuclides of mass 135 (In, Sn, Sb, Te, I, Xe, Cs, Ba, La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb). For {sup 135}In, {sup 135}Eu, {sup 135}Gd and {sup 135}Tb, only the half-lives and isotopic identifications are established without any knowledge of their level structures and {beta} decay schemes. Extensive high-spin structures are known for {sup 135}Te, {sup 135}I, {sup 135}Ba, {sup 135}La, {sup 135}Ce, {sup 135}Pr, {sup 135}Nd, {sup 135}Pm and {sup 135}Sm; including a superdeformed structure in {sup 135}Nd. Only limited high-spin data are available for {sup 135}Sb and the data for {sup 135}La are from a thesis only. Neutron capture {gamma}-ray data are available in detail for {sup 135}Ba (thermal and resonance energies) and marginally for {sup 135}Cs (thermal neutrons). Single particle-transfer data exist for {sup 135}Xe and {sup 135}Ba; and marginally for {sup 135}I and {sup 135}La. In the opinion of the evaluators, the decay schemes from {beta} decays of {sup 135}Sn, {sup 135}Xe, {sup 135}Pr, {sup 135}Pm isomers and {sup 135}Sm are not well established. The absolute level energies in {sup 135}Pm and {sup 135}Sm are not known. This work supersedes earlier (1998Se07,1987Se11,1975He12) evaluations of A = 135.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Identification of high spin states in {sup 134}I from {sup 252}Cf fission

High spin states in {sup 134}I were identified for the first time based on measurements of prompt {gamma} rays from the spontaneous fission of {sup 252}Cf at Gammasphere. Five excited levels with five deexciting transitions were observed. The mass number was assigned based on the intensity of transitions in the complementary Rh fragments. Angular correlations for the first two transitions in {sup 134}I and for high spin states in {sup 133,135,136}I were performed, but were not sufficient to firmly assign the spins and parities in {sup 134}I.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Origin of a signal detected with the LSD detector after the accident at the chernobyl nuclear power plant

A rare signal was detected at 23:53 Moscow time on April 27, 1986 with the LSD low-background scintillation detector located under Mont Blanc at a distance of 1820 km from Chernobyl. To reveal the origin of this signal, we discuss the results obtained with other instruments operating within a similar program, as well as analyze the characteristics of the pulses of the signal and facts referring to the explosion of the Chernobyl reactor. A hypothesis based on detection with the LSD of gamma-quanta from {beta} decays of {sup 135}I nuclei ejected into atmosphere by the reactor explosion and carried in the underground detector camera with air of positive ventilation is considered. The explosion origin of the LSD signal indicates a new technogenic source of the background in the search for neutrino bursts from cores of collapsing stars.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

g factors, spin-parity assignments, and multipole mixing ratios of excited states in N=82 isotones {sup 134}Te, {sup 135}I

The g-factor of the 4{sup +} state in {sup 134}Te has been measured for the first time by using a new technique developed for measuring angular correlations with Gammasphere. Also reported is the first measurement of the g-factor of the 15/2{sup +} state in {sup 135}I and the mixing ratios of several transitions. Furthermore, spins and parities are assigned to several levels in {sup 134}Te and {sup 135}I. The g-factor measurements are compared to shell model predictions and good agreement is found between experiment and theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross Sections and Yields for the Photo-Fission Productions of {sup 238}U

The yields and reaction cross-sections of {sup 92}Sr, {sup 97}Zr, {sup 97}Nb and {sup 135}I at the photofission of {sup 238}U were measured. These fission-fragments have some peculiarities in nuclear structure or in practical using. The measurements were performed on the bremsstrahlung of FLNR JINR microtron, in the electron energy range 10-22 MeV. The activation method with Ge(Li)--detector was used in these measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improved Cumulative Fission Yield Measurements with Fission Spectrum Neutrons on 235 U

Two isotopically-characterized targets of high-purity (99.84±0.03%) 235 U-oxide and a neutron dosimetry package were exposed to a pulsed neutron irradiation using the Godiva critical assembly at the National Criticality Experiments Research Center. Following irradiation, the fissioned targets were counted with a broad-energy germanium detector. Estimates of the total fissions for each target were made using measurements of well-known fission products. The total fission values were then used to measure the fission yields of 21 fission products with half-lives between 636 and 119,700 seconds. Mean values of seventeen of the measured fission products fell within the 95% confidence level of the Evaluated Nuclear Data Files VII.1/b (ENDF/B-VII.1) using the larger of the two uncertainties: 84g Br, 89 Rb, 91 Sr, 93 Y, 97 Zr, 101 Mo, 105 Ru, 128 Sn, 129 Sb, 130g Sb, 131 Sb, 131m Te, 133 I, 135 I, 141 Ba, 142 Ba, and 142 La. Seven isotopes were measured to better precision than is listed in the ENDF/B-VII.1 database: 89 Rb, 93 Y, 128 Sn, 129 Sb, 130g Sb, 131m Te, and 133 I. Four of the measured isotopes were found to be statistically different from the ENDF/B-VII.1 database: 94 Y, 134 Te, 134 I, and 138 Xe. Two of the isotopic analyses conducted in this paper fit the parent and daughter data simultaneously. The parent-daughter pairs measured in this way were the 134 Te/I and 142 Ba/La pairs. The fission yield results obtained in this way are unique, especially for 134 I, because the parent and daughter half-lives are so close. Here, given the limited number of direct measurements of the 134 Te/I pair from fast neutron induced fission and the seemingly high estimate for 134 Te from previous work, it is likely that the value in this paper is more accurate; however, additional measurements of this pair are needed to validate this assertion.

42 ENGINEERING↗

Point Kinetics Modelling of Decay Heat and the Xenon Effect

A point kinetics model has been used to simulate the impact of decay heat and xenon-135 on the behaviour, during various power transients, of a solution containing fissile material, such as those found in Aqueous Homogeneous Reactors (AHR) for medical isotope production. The heat produced by decay of radionuclides typically constitutes around 7% of total heat output during steady-state operation. Following a drop in reactivity, however, the fission power drops faster than the decay heat, and the latter may temporarily comprise a large proportion of the total heat output. Xenon-135 is a fission product and also a product of the decay of iodine-135. It acts as a strong neutron poison whose concentration can have a large impact on the reactivity of a fissile system. Following any reactivity insertion resulting in a change in the neutron flux, the concentration of xenon-135 changes, with a corresponding impact on reactivity. The model is based on those described in [1], [2] and [3]. The model has been adapted to represent a typical fissile solution and to model the effects of decay heat and xenon-135. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Preparation of Four Large-format Hot Isostatically Pressed I-AgZ Waste Form Samples for Performance Testing

Hot isostatic pressing (HIP) is being considered as a process to directly convert 129 I-bearing materials to a durable radiological waste form. Zeolites, specifically silver-exchanged mordenite (AgZ), have been studied extensively as potential radioactive iodine sorbents and will contain 129 I as chemisorbed AgI, a relatively insoluble compound with a high melting point. Oak Ridge National Laboratory has conducted several recent studies on the HIP of both I–AgZ and other iodine-bearing zeolites, resulting in an inventory of samples prepared with a suite of zeolites with varied iodine incorporation methods, pressing conditions, and sizes. These samples have been made available to researchers at other national laboratories in support of test method development to assess the stability of heterogenous iodine-bearing waste forms. The work described here generated four large-format HIPed I–AgZ samples. These samples are 1.5 in. diameter and 2 in. length and contain 49 g of I–AgZ. Two samples were prepared at an iodine loading of 64 mg I/g I– AgZ, and two samples were prepared at an iodine loading of 135 mg I/g I–AgZ. These two sets of duplicate samples will be made available upon request in support of iodine waste form durability method development efforts.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Wastes associated with recycling spent MOX fuel into fast reactor oxide fuel

A study sponsored by the DOE has been performed by AREVA to estimate the process and secondary wastes produced from an 800 MTIHM/yr (initial metric tons heavy metal a year) recycling plant proposed to be built in the U.S. utilizing the COEX process and utilized some DOE defined assumptions and constraints. In this paper, this plant has been analyzed for a recycling campaign that included 89% UO{sub x} and 11% MOX UNF to estimate process and secondary waste quantities produced while manufacturing 28 MTIHM/yr of SFR fuel. AREVA utilized operational data from its backend facilities in France (La Hague and MELOX), and from recent advances in waste treatment technology to estimate the waste quantities. A table lists the volumes and types of the different final wastes for a recycling plant. For instance concerning general fission products the form of the final wastes is vitrified glass and its volume generation rate is 135 l/MTHM, concerning Iodine 129 waste its final form is synthetic rock and its volume generation rate is 0.625 l/MTIHM.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Closure Report for Corrective Action Unit 107: Low Impact Soil Sites, Nevada Test Site, Nevada with ROTCs 1-3

CAU 107, “Low Impact Soil Sites,” consists of 15 CASs in Areas 1, 2, 3, 4, 5, 9, 10, and 18 of the NTS. The closure alternatives included No Further Action and Closure in Place with Administrative Controls. This CR provides a summary of completed closure activities. ROTC Justification: The FFACO UR as published in the Closure Report for Corrective Action Unit 107: Low Impact Soil Sites, Nevada Test Site, Nevada (NNSA/NSO, 2009) states that the UR for CAS 18-23-02, U-18d Crater (Sulky), was implemented for assumed radioactive contamination that could cause a dose greater that 25 millirems per year. This document further clarifies that this was based on particulate releases of radionuclides identified in Radiological Effluents Released from U.S. Continental Tests, 1961 through 1992 (DOE/NV, 1996). The radionuclides listed in this document are krypton (Kr)-85, Kr-85m, Kr-87, Kr-88, rubidium (Rb)-87, strontium (Sr)-89, Sr-91, yttrium (Y)-91, iodine (I)-131, I-132, I-133, I-134, I-135, xeon (Xe)-133, Xe-135, Xe-138, cesium (Cs)-135, Cs-138, barium (Ba)-139, and Ba-140.

54 ENVIRONMENTAL SCIENCES↗

Effects of culture conditions and biofilm formation on the iodine susceptibility of Legionella pneumophila

The susceptibility of Legionella pneumophila to iodination was studied with cultures grown in well water, on rich agar media, and attached to stainless-steel surfaces. Legionella pneumophila grown in water cultures in association with other microorganisms were less sensitive to disinfection by chlorine and iodine than were agar-passaged cultures. Differences in sensitivity to disinfection between water-cultured and agar-grown legionellae were determined by comparing C x T values (concentration in milligrams per litre multiplied by time in minutes to achieve 99% decrease in viability) and CM x T values (concentration in molarity). Iodine (1500x) gave a greater difference in CM x T values than did chlorine (68x). Iodine was 50 times more effective than chlorine when used with agar-grown cultures but was only twice as effective when tested against water-grown Legionella cultures. C x T x S values (C x T multiplied by percent survivors), which take into consideration the percent surviving bacteria, were used to compare sensitivities in very resistant populations, such as those in biofilms. Water cultures of legionellae associated with stainless-steel surfaces were 135 times more resistant to iodination than were unattached legionellae, and they were 210,000 times more resistant than were agar-grown cultures. These results indicate that the conditions under which legionellae are grown can dramatically affect their susceptibility to some disinfectants and must be considered when evaluating the efficacy of a disinfecting agent.

Non-NASA Center↗

Role of (n,2n) reactions in transmutation of long-lived fission products

The conditions under which (n,γ) and (n,2n) reactions can help or hinder each other in neutron transmutation of long-lived fission products (LLFPs) are considered. Isotopic and elemental transmutation for the main long-lived fission products, {sup 79}Se, {sup 93}Zr, {sup 99}Tc, {sup 107}Pd, {sup 126}Sn, {sup 129}I, and {sup 135}Cs, are considered. The effect of (n,2n) reactions on the equilibrium amount of nuclei of the transmuted isotope and the neutron consumption required for the isotope processing is estimated. The aim of the study is to estimate the influence of (n,2n) reactions on efficiency of neutron LLFP transmutation. The code TIME26 and the libraries of evaluated nuclear data ABBN-93, JEF-PC, and JANIS system are applied. The following results are obtained: (1) The effect of (n,2n) reactions on the minimum number of neutrons required for transmutation and the equilibrium amount of LLFP nuclei is estimated. (2) It is demonstrated that, for three LLFP isotopes ({sup 126}Sn, {sup 129}I, and {sup 135}Cs), (n,γ) and (n,2n) reactions are partners facilitating neutron transmutation. The strongest effect of (n,2n) reaction is found for {sup 126}Sn transmutation (reduction of the neutron consumption by 49% and the equilibrium amount of nuclei by 19%).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The evaluation of half-lives and other decay data used in nuclear astrophysics and cosmochronology

The current status of some decay data used in nuclear astrophysics and cosmochronology is presented. The half-life of {sup 79}Se has been evaluated as 3.6(3) Multiplication-Sign 10{sup 5} yr. The total energy of non-neutrino radiation released in act of {sup 37}Ar decay has been obtained being 2.709 (16) keV per disintegration. The recommended half-life values of the long-lived radionuclides (T{sub 1/2} Greater-Than-Or-Equivalent-To 10{sup 6} yr) of {sup 26}Al, {sup 40}K, {sup 53}Mn, {sup 60}Fe, {sup 87}Rb, {sup 93}Zr, {sup 98}Tc, {sup 107}Pd, {sup 129}I, {sup 135}Cs, {sup 146}Sm, {sup 176}Lu, {sup 182}Hf, {sup 187}Re, {sup 205}Pb, {sup 232}Th, {sup 235}U, {sup 238}U, {sup 244}Pu, and {sup 247}Cm are given based on the evaluations published until 2010.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Role of fast reactor and its cycle to reduce nuclear waste burden

The role of the metal fuel fast reactor with recycling of actinides and the five long-lived fission products based on the concept of the Self-Consistent Nuclear Energy System has been examined by evaluating the reduction of nuclear wastes during the transition period to this reactor system. The evaluation was done in comparison to an LWR once-through case and a conventional actinide recycling oxide fast reactor. As a result, it is quantitatively clarified that a metal fuel fast reactor with actinide and the five long-lived fission products (I{sup 129}, Tc{sup 99}, Zr{sup 93}, Cs{sup 135} and Sn{sup 126}) recycling could play a significant role in reducing the nuclear waste burden including the current LWR wastes. This can be achieved by using a fast neutron spectrum reactor enhanced with metal fuel that brings high capability as a 'waste burner'. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Investigation of Xenon Oscillations via Point Kinetics

We all appreciate the special role Xenon-135 plays in reactor transients. Unless there is sufficient reactivity override, on shutdown a conventional reactor cannot immediately restart because of the buildup of strongly absorbing Xenon from Iodine decay and the absence of neutron flux to continue its elimination. We are also aware of how the flux imbalance in a large reactor core gives rise to Xenon induced power precession around the core in unpredictable ways. In addition, with regard to computational methods, we lack readily accessible numerical algorithms enabling reliable characterization of Xenon oscillations with simple models to explain this fundamentally important phenomenon. Nowhere is this more apparent than in the classroom. In this presentation, we first consider a new 12-element comprehensive decay model to Xenon and its corresponding numerical implementation and verification to establish a predictive model of Xenon buildup in a constant flux. We then follow with a reduced self-consistent flux model in an infinite reactor- a model not found in textbooks. This presentation should appeal to those interested in developing high order numerical methods for reactor transients.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radioactive Cesium Isotope Ratios as a Tool for determining Dispersal and Re-dispersal Mechanisms Downwind from the Nevada Nuclear Security Site

Fractionation of the two longer lived radioactive cesium isotopes (135 and 137) produced by above ground nuclear tests have been measured and used to clarify the dispersal mechanisms of cesium deposited in the area between the Nevada Nuclear Security Site (NNSS) and Lake Mead in the southwestern United States. Fractionation of these isotopes is due to the 135 decay chain requiring several days to completely decay to Cs and the 137 decay chain less than one hour. Since the Cs precursors are gases, iodine and xenon, the 135Cs plume was deposited farther downwind than the 137Cs plume. Samples were obtained from the Las Vegas arm of Lake Mead, separated into segments, gamma counted to identify layers of activity and analyzed for 135Cs/137Cs ratios. The layers proved to have nearly identical highly fractionated isotope ratios. This information is consistent with a model where the cesium was initially deposited onto the land area draining into Lake Mead and the composite from all the above ground shots subsequently washed onto the Lake by high intensity rain and windstorms producing a layering of Cs activity where each layer is a portion of the composite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SU-G-IeP2-12: The Effect of Iterative Reconstruction and CT Tube Voltage On Hounsfield Unit Values of Iodinated Contrast

Purpose: To investigate the effects of changing iterative reconstruction strength and tube voltage on Hounsfield Unit (HU) values of varying concentrations of Iodinated contrast medium in a phantom. Method: Iodinated contrast (Omnipaque 300, GE Healthcare, Princeton NJ) was diluted with distilled water to concentrations of 0.6, 0.9, 1.8, 3.6, 7.2, and 10.8 mg/mL of Iodine. The solutions were scanned in a patient equivalent water phantom on two MDCT scanners: VCT 64 slice (GE Medical Systems, Waukesha, WI) and an Aquilion One 320 slice scanner (Toshiba America Medical Systems, Tustin CA). The phantom was scanned at 80, 100, 120, 140 kV using 400, 255, 180, and 130 mAs, respectively, for the VCT scanner, and 80, 100, 120, and 135 kV using 400, 250, 200, and 150 mAs, respectively, on the Aquilion One. Images were reconstructed at 2.5 mm (VCT) and 0.5 mm (Aquilion One). The VCT images were reconstructed using Advanced Statistical Iterative Reconstruction (ASIR) at 6 different strengths: 0%, 20%, 40%, 60%, 80%, and 100%. Aquilion One images were reconstructed using Adaptive Iterative Dose Reduction (AIDR) at 4 strengths: no AIDR, Weak AIDR, Standard AIDR, and Strong AIDR. Regions of interest (ROIs) were drawn on the images to measure the HU values and standard deviations of the diluted contrast. Second order polynomials were used to fit the HU values as a function of Iodine concentration. Results: For both scanners, there was no significant effect of changing the iterative reconstruction strength. The polynomial fits yielded goodness-of-fit (R2) values averaging 0.997. Conclusion: Changing the strength of the iterative reconstruction has no significant effect on the HU values of Iodinated contrast in a tissue-equivalent phantom. Fit values of HU vs Iodine concentration are useful in quantitative imaging protocols such as the determination of cardiac output from time-density curves in the main pulmonary artery.

60 APPLIED LIFE SCIENCES↗

g-factor and spin-parity assignments of excited states in the N=83 isotones {sup 135}Te, {sup 136}I, {sup 137}Xe, and {sup 138}Cs

The g factor of the 15/2{sup -} state in {sup 137}Xe was measured for the first time by using a newly developed technique for measuring angular correlations with Gammasphere. Spins and parities were assigned to several levels in the N=83 isotones {sup 135}Te, {sup 136}I, {sup 137}Xe, and {sup 138}Cs. The calculated g factor in the shell-model frame is in good agreement with the measured one in the present work. Shell-model calculations also support our spin-parity assignments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗