Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IODINE 111”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 111

This evaluation for A = 111 updates one by J. Blachot, (2003Bl10), published in Nuclear Data Sheets 100, 179 (2003)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quenching of the SnSbTe Cycle in the rp Process

The nuclides {sup 104-108}Sn, {sup 106-110}Sb, {sup 108,109}Te, and {sup 111}I at the expected endpoint of the astrophysical rp process have been produced in {sup 58}Ni+{sup nat}Ni fusion-evaporation reactions at IGISOL and their mass values were precisely measured with the JYFLTRAP Penning trap mass spectrometer. For {sup 106}Sb, {sup 108}Sb, and {sup 110}Sb these are the first direct experimental mass results obtained. The related one-proton separation energies have been derived and the value for {sup 106}Sb, S{sub p}=424(8) keV, shows that the branching into the closed SnSbTe cycle in the astrophysical rp process is weaker than expected.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-E-I-14: Comparison of Iodine-Labeled and Indium-Labeled Antibody Biodistributions

Purpose: It is often assumed that animal biodistributions of novel proteins are not dependent upon the radiolabel used in their determination. In units of percent injected dose per gram of tissue (%ID/g), organ uptake results (u) may be obtained using either iodine or metal as radioactive labels. Iodination is preferred as it is a one-step process whereas metal labeling requires two chemical procedures and therefore more protein material. It is important to test whether the radioactive tag leads to variation in the uptake value. Methods: Uptakes of 3antibodies to Carcinoembryonic Antigen (CEA) were evaluated in a nude mouse model bearing 150 to 300 mg LS174T human colon cancer xenografts. Antibodies included diabody (56 kDa), minibody (80kDa) and intact M5A (150 kDa) anti-CEA cognates. Both radioiodine and indium-111 labels were used with uptakes evaluated at 7 time(t) points out to 96 h. Ratios (R) of u(iodine-label)/u(indium-label) were determined for liver, spleen, kidneys, lung and tumor. Results: Hepatic loss was rapid for diabody and minibody; by 24 h their R values were only 2%; i.e., uptake of iodine was 2% of that of indium for these 2 antibodies. By contrast, R for the intact cognate was 50% at that time point. Splenic results were similar. Tumor uptake ratios did not depend upon the antibody type and were 50% at 24 h. Conclusions: Relatively rapid loss of iodine relative to indium in liver and spleen was observed in lower mass antibodies. Tumor ratios were larger and independent of antibody type. Aside from tumor, the R ratio of uptakes depended on the antibody type. R values decreased monotonically with time in all tissues and for all cognates. Using this ratio, one can possibly correct iodine-based u (t) results so that they resemble radiometal-derived biodistributions.

60 APPLIED LIFE SCIENCES↗

Effects of magnetic flux density and substrate bias voltage on Ni films prepared on a flexible substrate material using unbalanced magnetron sputtering assisted by inductively coupled plasma

The authors fabricated Ni films on a flexible substrate material using unbalanced magnetron sputtering assisted by inductively coupled plasma. The effects of magnetic flux density B{sub C} and substrate DC bias voltage V{sub S} on the Ni film structures were investigated. For V{sub S} = −40 V, the average surface grain size D{sub G} measured by atomic force microscopy for B{sub C} = 0, 3, and 5 mT was 88.2, 95.4, and 104.4 nm, respectively. In addition, D{sub G} increased with V{sub S}. From x-ray diffraction measurements, the (111) and (200) peaks were clearly visible for the fabricated Ni films. The ratio of the integrated intensities of I(111)/I(200) increased with V{sub S}. For V{sub S} = −40 V and B{sub C} = 3 mT, a film resistivity ρ of 8.96 × 10{sup −6} Ω cm was observed, which is close to the Ni bulk value of 6.84 × 10{sup −6} Ω cm. From these results, the authors determined that the structure of the fabricated Ni films on the flexible substrate material was affected by the values of B{sub C} and V{sub S}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dose received by occupationally exposed workers at a nuclear medicine department

Personal Dose Equivalent (PDE) values were determined for occupational exposed workers (OEW) at the Nuclear Medicine Department (NMD) of 'Instituto Nacional de Cancerologia' (INCan), Mexico, using TLD-100 thermoluminescent dosemeters. OEW at NMD, INCan make use of radiopharmaceuticals for diagnosis and treatment of diseases. Radionuclides associated to a pharmaceutical compound used at this Department are {sup 131}I, {sup 18}F, {sup 68}Ga, {sup 99m}Tc, {sup 111}In and {sup 11}C with main gamma emission energies between 140 and 511 keV. Dosemeter calibration was performed at the metrology department of 'Instituto Nacional de Investigaciones Nucleares' (ININ), Mexico. Every occupational worker used dark containers with three dosimeters which were replaced monthly for a total of 5 periods. Additionally, control dosemeters were also placed at a site free of radioactive sources in order to determine the background radiation. Results were adjusted to find PDE/day and estimating annual PDE values in the range between 2 mSv (background) and 9 mSv. The mean annual value is 3.51 mSv and the standard deviation SD is 0.78 mSv. Four of the 16 OEW received annual doses higher than the average +1 SD (4.29 mSv). Results depend on OEW daily activities and were consistent for each OEW for the 5 studied periods as well as with PDE values reported by the firm that performs the monthly service. All obtained values are well within the established annual OEW dose limit stated in the {sup R}eglamento General de Seguridad Radiologica{sup ,} Mexico (50 mSv), as well as within the lower limit recommended by the 'International Commission on Radiation Protection' (ICRP), report no.60 (20 mSv). These results verify the adequate compliance of the NMD at INCan, Mexico with the norms given by the national regulatory commission.

61 RADIATION PROTECTION AND DOSIMETRY↗

A dose point kernel database using GATE Monte Carlo simulation toolkit for nuclear medicine applications: Comparison with other Monte Carlo codes

Purpose: GATE is a Monte Carlo simulation toolkit based on the Geant4 package, widely used for many medical physics applications, including SPECT and PET image simulation and more recently CT image simulation and patient dosimetry. The purpose of the current study was to calculate dose point kernels (DPKs) using GATE, compare them against reference data, and finally produce a complete dataset of the total DPKs for the most commonly used radionuclides in nuclear medicine. Methods: Patient-specific absorbed dose calculations can be carried out using Monte Carlo simulations. The latest version of GATE extends its applications to Radiotherapy and Dosimetry. Comparison of the proposed method for the generation of DPKs was performed for (a) monoenergetic electron sources, with energies ranging from 10 keV to 10 MeV, (b) beta emitting isotopes, e.g., {sup 177}Lu, {sup 90}Y, and {sup 32}P, and (c) gamma emitting isotopes, e.g., {sup 111}In, {sup 131}I, {sup 125}I, and {sup 99m}Tc. Point isotropic sources were simulated at the center of a sphere phantom, and the absorbed dose was stored in concentric spherical shells around the source. Evaluation was performed with already published studies for different Monte Carlo codes namely MCNP, EGS, FLUKA, ETRAN, GEPTS, and PENELOPE. A complete dataset of total DPKs was generated for water (equivalent to soft tissue), bone, and lung. This dataset takes into account all the major components of radiation interactions for the selected isotopes, including the absorbed dose from emitted electrons, photons, and all secondary particles generated from the electromagnetic interactions. Results: GATE comparison provided reliable results in all cases (monoenergetic electrons, beta emitting isotopes, and photon emitting isotopes). The observed differences between GATE and other codes are less than 10% and comparable to the discrepancies observed among other packages. The produced DPKs are in very good agreement with the already published data, which allowed us to produce a unique DPKs dataset using GATE. The dataset contains the total DPKs for {sup 67}Ga, {sup 68}Ga, {sup 90}Y, {sup 99m}Tc, {sup 111}In, {sup 123}I, {sup 124}I, {sup 125}I, {sup 131}I, {sup 153}Sm, {sup 177}Lu {sup 186}Re, and {sup 188}Re generated in water, bone, and lung. Conclusions: In this study, the authors have checked GATE's reliability for absorbed dose calculation when transporting different kind of particles, which indicates its robustness for dosimetry applications. A novel dataset of DPKs is provided, which can be applied in patient-specific dosimetry using analytical point kernel convolution algorithms.

61 RADIATION PROTECTION AND DOSIMETRY↗

Site-dependent charge transfer at the Pt(111)-ZnPc interface and the effect of iodine

The electronic structure of ZnPc, from sub-monolayers to thick films, on bare and iodated Pt(111) is studied by means of X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and scanning tunneling microscopy. Our results suggest that at low coverage ZnPc lies almost parallel to the Pt(111) substrate, in a non-planar configuration induced by Zn-Pt attraction, leading to an inhomogeneous charge distribution within the molecule and an inhomogeneous charge transfer to the molecule. ZnPc does not form a complete monolayer on the Pt surface, due to a surface-mediated intermolecular repulsion. At higher coverage ZnPc adopts a tilted geometry, due to a reduced molecule-substrate interaction. Our photoemission results illustrate that ZnPc is practically decoupled from Pt, already from the second layer. Pre-deposition of iodine on Pt hinders the Zn-Pt attraction, leading to a non-distorted first layer ZnPc in contact with Pt(111)-I(√3×√3) or Pt(111)-I(√7×√7), and a more homogeneous charge distribution and charge transfer at the interface. On increased ZnPc thickness iodine is dissolved in the organic film where it acts as an electron acceptor dopant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

10-Year Experience With I-125 Prostate Brachytherapy at the Princess Margaret Hospital: Results for 1,100 Patients

Purpose: To report outcomes for 1,111 men treated with iodine-125 brachytherapy (BT) at a single institution. Methods and Materials: A total of 1,111 men (median age, 63) were treated with iodine-125 prostate BT for low- or intermediate-risk prostate cancer between March 1999 and November 2008. Median prostate-specific antigen (PSA) level was 5.4 ng/ml (range, 0.9-26.1). T stage was T1c in 66% and T2 in 34% of patients. Gleason score was 6 in 90.1% and 7 or 8 in 9.9% of patients. Neoadjuvant hormonal therapy (2-6 months course) was used in 10.1% of patients and combined external radiotherapy (45 Gy) with BT (110 Gy) in 4.1% (n = 46) of patients. Univariate and multivariate Cox proportional hazards were used to determine predictors of failure. Results: Median follow-up was 42 months (range, 6-114), but for biochemical freedom from relapse, a minimum PSA test follow-up of 30 months was required (median 54; n = 776). There were 27 failures, yielding an actuarial 7-year disease-free survival rate of 95.2% (96 at risk beyond 84 months). All failures underwent repeat 12-core transrectal ultrasound -guided biopsies, confirming 8 local failures. On multivariate analysis, Gleason score was the only independent predictor of failure (p = 0.001; hazard ratio, 4.8 (1.9-12.4). Median International Prostate Symptom score from 12 to 108 months ranged between 3 and 9. Of the men reporting baseline potency, 82.8% retained satisfactory erectile function beyond 5 years. Conclusion: Iodine-125 prostate BT is a highly effective treatment option for favorable- and intermediate-risk prostate cancer and is associated with maintenance of good urinary and erectile functions.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Mechanistic Transformation of CuI Nanoparticles Into Oxidation‐Resistant 2D Copper Nanoplates

Unconventional phase transformations reveal new crystallization mechanisms, yet direct observation of such pathways during nanoscale solution-phase synthesis remains challenging. This study uncovers an atypical growth process in which thermodynamically stable CuI nanoparticles (NPs) transform into high-energy 2D Cu plates. Using a combination of in situ transmission electron microscopy, ex situ structural analysis, and density functional theory calculations shows that the formation of structural defects induced by hexadecylamine and chloride ions facilitates the transformation by promoting surface iodine vacancies. The resulting Cu{111} nanoplates, with ultrathin thicknesses (≈4 nm) and exceptionally high aspect ratios (≈450), display enhanced oxidation resistance and long-term stability under ambient conditions. This resistance is attributed to the close-packed {111} facets, which suppress chemical oxidation even after extended exposure to air over 100 days. These findings provide new insights into non-classical crystallization pathways in metal nanomaterials and suggest a versatile approach for preparing oxidation-resistant, structurally defined Cu nanostructures.

36 MATERIALS SCIENCE↗

X-ray and synchrotron studies of porous silicon

The results of comprehensive studies of layers of porous silicon of different conductivity types, grown by anodizing standard Si(111) substrates in an electrolyte based on fluoric acid and ethanol with the addition of 5% of iodine and kept in air for a long time, are discussed. Measurements are performed by scanning electron microscopy, high-resolution X-ray diffraction, and ultrasoft X-ray spectroscopy using synchrotron radiation. The structural parameters of the layers (thickness, strain, and porosity) and atomic and chemical composition of the porous-silicon surface are determined. It is found that an oxide layer 1.5-2.3-nm thick is formed on the surface of the silicon skeleton. The near-edge fine structure of the Si 2p absorption spectrum of this layer corresponds to the fine structure of the 2p spectrum of well coordinated SiO{sub 2}. In this case, the fine structure in the Si 2p-edge absorption region of the silicon skeleton is identical to that of the 2p absorption spectrum of crystalline silicon.

36 MATERIALS SCIENCE↗

Ambient Dose Equivalent measured at the Instituto Nacional de Cancerologia Department of Nuclear Medicine

Ambient dose equivalent values were determined in several sites at the Instituto Nacional de Cancerologia, Departmento de Medicina Nuclear, using TLD-100 and TLD-900 thermoluminescent dosemeters. Additionally, ambient dose equivalent was measured at a corridor outside the hospitalization room for patients treated with {sup 137}Cs brachytherapy. Dosemeter calibration was performed at the Instituto Nacional de Investigaciones Nucleares, Laboratorio de Metrologia, to known {sup 137}Cs gamma radiation air kerma. Radionuclides considered for this study are {sup 131}I, {sup 18}F, {sup 67}Ga, {sup 99m}Tc, {sup 111}In, {sup 201}Tl and {sup 137}Cs, with main gamma energies between 93 and 662 keV. Dosemeters were placed during a five month period in the nuclear medicine rooms (containing gamma-cameras), injection corridor, patient waiting areas, PET/CT study room, hot lab, waste storage room and corridors next to the hospitalization rooms for patients treated with {sup 131}I and {sup 137}Cs. High dose values were found at the waste storage room, outside corridor of {sup 137}Cs brachytherapy patients and PET/CT area. Ambient dose equivalent rate obtained for the {sup 137}Cs brachytherapy corridor is equal to (18.51{+-}0.02)x10{sup -3} mSv/h. Sites with minimum doses are the gamma camera rooms, having ambient dose equivalent rates equal to (0.05{+-}0.03)x10{sup -3} mSv/h. Recommendations have been given to the Department authorities so that further actions are taken to reduce doses at high dose sites in order to comply with the ALARA principle (as low as reasonably achievable).

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural analysis of Cr aggregation in ferromagnetic semiconductor (Zn,Cr)Te

The Cr aggregation in a ferromagnetic semiconductor (Zn,Cr)Te was studied by performing precise analyses using TEM and XRD of microscopic structure of the Cr-aggregated regions formed in iodine-doped Zn{sub 1−x}Cr{sub x}Te films with a relatively high Cr composition x ∼ 0.2. It was found that the Cr-aggregated regions are composed of Cr{sub 1−δ}Te nanocrystals of the hexagonal structure and these hexagonal precipitates are stacked preferentially on the (111)A plane of the zinc-blende (ZB) structure of the host ZnTe crystal with its c-axis nearly parallel to the (111){sub ZB} plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of the stability and migration of Kr, I and Xe in ZrO2

The stability and migration of Kr, I and Xe in bulk ZrO2 and on the ZrO2 (1 1 1) surface have been studied by standard density functional theory (DFT) and the DFT-D2 method that corrects for the van der Waals interaction. Both methods show that Kr and Xe prefer to incorporate in the bulk phase rather than adsorb on the surface, and Xe is very mobile in the bulk state. For Kr and Xe adsorption on the surface, van der Waals interaction dominates, causing the weak interaction between the adsorbate and substrate. Iodine is found to have comparable stability in both phases and forms I O bonds with strong covalency. It exhibits higher mobility on the surface than in the bulk ZrO2, and diffusion from bulk-like state to surface state is an exothermic process. The fission product behavior in ZrO2 is shown to be a complicated synergetic effect of fission product atomic size, electron negativity, occupation site and phase structure of the host.

Xiao, Haiyan↗

Iodine versus Bromine Functionalization for Bottom-Up Graphene Nanoribbon Growth: Role of Diffusion

Deterministic bottom-up approaches for synthesizing atomically well-defined graphene nanoribbons (GNRs) largely rely on the surface-catalyzed activation of selected labile bonds in a molecular precursor followed by step-growth polymerization and cyclodehydrogenation. While the majority of successful GNR precursors rely on the homolytic cleavage of thermally labile C–Br bonds, the introduction of weaker C–I bonds provides access to monomers that can be polymerized at significantly lower temperatures, thus helping to increase the flexibility of the GNR synthesis process. Scanning tunneling microscopy imaging of molecular precursors, activated intermediates, and polymers resulting from stepwise thermal annealing of both Br and I substituted precursors for chevron GNRs reveals that the polymerization of both precursors proceeds at similar temperatures on Au(111). Finally, this surprising observation is consistent with diffusion-controlled polymerization of the surface-stabilized radical intermediates that emerge from homolytic cleavage of either the C–Br or the C–I bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shape-controlled synthesis of gold icosahedra and nanoplates using Pluronic P123 block copolymer and sodium chloride

Gold icosahedra with an average diameter of about 600 nm were easily prepared by heating an aqueous solution of the amphiphilic block copolymer, poly(ethylene oxide){sub 20}-poly(propylene oxide){sub 70}-poly(ethylene oxide){sub 20} (Pluronic P123), and hydrogen tetrachloroaurate(III) trihydrate (HAuCl{sub 4}.3H{sub 2}O) at 60 deg. C for 25 min. When sodium chloride (NaCl:HAuCl{sub 4} molar ratio=10:1) was added to this aqueous solution, gold nanoplates were produced. The chloride ion was found to be a key component in the formation of the gold nanoplates by facilitating the growth of {l_brace}111{r_brace} oriented hexagonal/triangular gold nanoplates, because similar gold nanoplates were produced when LiCl or KCl was added to the aqueous solution instead of NaCl, while gold nanocrystals having irregular shapes were produced when NaBr or NaI was added. - Graphical abstract: Gold icosahedra were prepared by heating an aqueous solution of Pluronic P123 and HAuCl{sub 4}. When NaCl was added to this solution, gold nanoplates were produced.

77 NANOSCIENCE AND NANOTECHNOLOGY↗