Selective removal of hydrogen sulfide from simulated biogas streams using sterically hindered amine adsorbents
Not provided.
catalysis (heterogeneous), defects, membrane, carb↗
SEARCH · Engineering Papers
Results for “Hydrogen Sulfide”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hydrogen Sulfide Passivation for p-Type Passivated Emitter and Rear Contact Solar Cells
This work reports on the application of sulfur (S)-passivation to passivated emitter and rear contact (PERC) solar cells. The emitter surface was passivated by hydrogen sulfide (H 2 S) gas phase reaction and capped by a hydrogenated amorphous silicon nitride (a-SiN x :H) layer. The sulfur passivation on a symmetrically n + diffused emitter is shown to lead to an emitter saturation current density (J 0n+ ) of 30 fA/cm 2 at R sheet,n+ ≈ 100 Ω/sq. The application of S-passivation to the emitter surface in the PERC cell structure, with the rear surface passivated by an aluminum oxide (Al 2 O 3 )/a-SiN x :H stack, showed a promising implied open-circuit voltage (iV OC ) of 686 mV before metallization. This iV OC was higher than that for the a-SiN x :H or SiO 2 /a-SiN x :H passivated emitter surfaces (675 and 674 mV, respectively) on PERC cells processed in the same run. However, a significant drop in cell V OC is observed for the S-passivated PERC cell after the completion of device fabrication with laser patterning, screen-printed metal contact deposition, and firing. Nonetheless, an efficiency of ~20% and a V OC of ~650 mV was achieved with an emitter surface passivated by sulfur. We identified that the 760°C contact firing process degrades the S-passivation quality. Furthermore, the surface morphology was studied, and a detailed surface analysis was performed to study the causes of the S-passivated surface degradation.
14 SOLAR ENERGY↗
Mitigation of Acute Hydrogen Sulfide and Ammonia Emissions from Swine Manure during Three-Hour Agitation Using Pelletized Biochar
The risk of inhalation exposure to elevated concentrations of hydrogen sulfide (H2S) and ammonia (NH3) during the agitation of stored swine manure is high. Once or twice a year, farmers agitate manure before pump-out and application to fields. Agitation of the swine manure causes the short-term releases of highly toxic levels of H2S and NH3. In our previous pilot-scale studies, the biochar powder showed significant mitigation of H2S and NH3 emissions when it was surficially applied to manure immediately before agitation. However, fine biochar powder application poses hazards by itself and may not be practical to apply on a farm scale, especially when livestock and workers are present. We hypothesized that applying pelletized biochar to manure surfaces is just as effective as applying powder to protect farmers and animals from excessive exposure to H2S and NH3. This work reports on the lab-scale proof-of-the-concept trials with biochar pellets on the lab scale. The objective was to compare the biochar pellets and biochar powder on their effectiveness of mitigation on H2S and NH3 gases during 3-h-long swine manure agitation. Three scenarios were compared in (n = 3) trials: (i) control, (ii) 12.5 mm thick surficial application to manure surface of biochar powder, and (iii) an equivalent (by mass) dose of pelletized biochar applied to the manure surface. The biochar powder was bound with 35% (wt) water into ~5 × 10 mm (dia × length) pellets. The biochar powder was significantly (p < 0.05) more effective than the biochar pellets. Still, pellets reduced total H2S and NH3 emissions by ~72% and ~68%, respectively (p = 0.001), compared with ~99% by powder (p = 0.001). The maximum H2S and NH3 concentrations were reduced from 48.1 ± 4.8 ppm and 1810 ± 850 ppm to 20.8 ± 2.95 ppm and 775 ± 182 ppm by pellets, and to 22.1 ± 16.9 ppm and 40.3 ± 57 ppm by powder, respectively. These reductions are equivalent to reducing the maximum concentrations of H2S and NH3 during the 3-h manure agitation by 57% and 57% (pellets) and 54% and 98% (powder), respectively. Treated manure properties hinted at improved nitrogen retention, yet they were not significant due to high variability. We recommend scaling up and trials on the farm-scale level using biochar pellets to assess the feasibility of application to large manure surfaces and techno-economic evaluation.
Chen, Baitong (ORCID:0000000266071253)↗
Physiological and genomic evidence of cysteine degradation and aerobic hydrogen sulfide production in freshwater bacteria
The sulfur-containing amino acid cysteine is abundant in the environment, including in freshwater lakes. Biological cysteine degradation can result in hydrogen sulfide (H 2 S), a toxic and ecologically relevant compound that is a central player in biogeochemical cycling in aquatic environments. Here, we investigated the ecological significance of cysteine in oxic freshwater, using isolated cultures, controlled experiments, and multiomics. We screened bacterial isolates enriched from natural lake water for their ability to produce H 2 S when provided cysteine. We identified 29 isolates (Bacteroidota, Proteobacteria, and Actinobacteria) that produced H 2 S. To understand the genomic and genetic basis for cysteine degradation and H 2 S production, we further characterized three isolates using whole-genome sequencing (using a combination of short-read and long-read sequencing) and tracked cysteine and H 2 S levels over their growth ranges: Stenotrophomonas maltophilia (Gammaproteobacteria), S. bentonitica (Gammaproteobacteria), and Chryseobacterium piscium (Bacteroidota). Cysteine decreased and H 2 S increased, and all three genomes had genes involved in cysteine degradation. Finally, to assess the presence of these organisms and genes in the environment, we surveyed a 5-year time series of metagenomic data from the same isolation source (Lake Mendota, Madison, WI, USA) and identified their presence throughout the time series. Overall, our study shows that diverse isolated bacterial strains can use cysteine and produce H 2 S under oxic conditions, and we show evidence using metagenomic data that this process may occur more broadly in natural freshwater lakes. Future considerations of sulfur cycling and biogeochemistry in oxic environments should account for H 2 S production from the degradation of organosulfur compounds.
59 BASIC BIOLOGICAL SCIENCES↗
Efficient passivation of n-type and p-type silicon surface defects by hydrogen sulfide gas reaction
An efficient surface defect passivation is observed by reacting clean Si in a dilute hydrogen sulfide-argon gas mixture (< 5% H2S in Ar) for both n-type and p-type Si wafers with planar and textured surfaces. Surface recombination velocities of 1.5 and 8 cm/s are achieved on n-type and p-type Si wafers, respectively, at an optimum reaction temperature of 550oC that are comparable to the best surface passivation quality used in high efficiency Si solar cells. Surface chemical analysis using x-ray photoelectron spectroscopy shows that sulfur is primarily bonded in a sulfide environment, and synchrotron-based soft x-ray emission spectroscopy of the adsorbed sulfur atoms suggests the formation of S-Si bonds. Furthermore, the sulfur surface passivation layer is unstable in air, attributed to surface oxide formation and a simultaneous decrease of sulfide bonds. However, the passivation can be stabilized by a low-temperature (300oC) deposited amorphous silicon nitride (a-Si:NX:H) capping layer.
14 SOLAR ENERGY↗
Lanthanum induced lattice strain improves hydrogen sulfide capacities of copper oxide adsorbents
This work probes the effects of La on reactions involving CuO sorbents and H 2 S in gaseous streams. La-CuO sorbents with nominal La/Cu atomic ratios of 1:2 achieved higher capacities (27 and 36 g H 2 S per 100 g sorbent) compared to CuO sorbents (25 g H 2 S per 100 g sorbent). Here, comparison of the La-CuO sorbents using energy dispersive x-ray spectroscopy and La L 3 -edge XAS suggested that increased capacity resulted from more uniform dispersion of La within the CuO phase (3.3 wt.% vs. 1.0 wt.% La). X-Ray absorption near edge structure analysis suggested more electron-rich Cu species in La-CuO samples, while extended X-ray absorption fine structure modeling showed an increase in single-scattering path lengths for neighboring and near-neighbor atoms. These changes suggest that La induces strain in the Cu-O lattice, thereby increasing H 2 S capacity by reducing energy barriers associated with surface reactions between oxygen atoms and adsorbed H 2 S molecules.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Hydrogen Bond Interaction Networks in the Mixed Pentamers of Hydrogen Sulfide and Water
Not provided.
Chemistry↗
Membranes for gas separation
Membranes, methods of making the membranes, and methods of using the membranes are described herein. The membranes can comprise a support layer, and a selective polymer layer disposed on the support layer. The selective polymer layer can comprise a selective polymer matrix and carbon nanotubes dispersed within the selective polymer matrix. The carbon nanotubes can comprise multi-walled carbon nanotubes wrapped in a hydrophilic polymer, such as polyvinylpyrrolidone or a copolymer thereof, such as poly(1-vinylpyrrolidone-co-vinyl acetate). The membranes can exhibit selective permeability to gases. As such, the membranes can be for the selective removal of carbon dioxide and/or hydrogen sulfide from hydrogen and/or nitrogen.
Ho, W. S. Winston↗
Membranes for gas separation
Membranes, methods of making the membranes, and methods of using the membranes are described herein. The membranes can comprise a support layer, and a selective polymer layer disposed on the support layer. In some cases, the support layer can comprise a gas permeable polymer and hydrophilic additive dispersed within the gas permeable polymer. In some cases, the selective polymer layer can comprise a selective polymer matrix and carbon nanotubes dispersed within the selective polymer matrix. The membranes can exhibit selective permeability to gases. As such, the membranes can be for the selective removal of carbon dioxide and/or hydrogen sulfide from hydrogen and/or nitrogen.
Ho, W. S. Winston↗
Sulfur Metabolites Play Key System-Level Roles in Modulating Denitrification
Competition between nitrate-reducing bacteria (NRB) and sulfate-reducing bacteria (SRB) for resources in anoxic environments is generally thought to be governed largely by thermodynamics. It is now recognized that intermediates of nitrogen and sulfur cycling (e.g., hydrogen sulfide, nitrite, etc.) can also directly impact NRB and SRB activities in freshwater, wastewater, and sediment and therefore may play important roles in competitive interactions. Here, through comparative transcriptomic and metabolomic analyses, we have uncovered mechanisms of hydrogen sulfide- and cysteine-mediated inhibition of nitrate respiratory growth for the NRB Intrasporangium calvum C5. Specifically, the systems analysis predicted that cysteine and hydrogen sulfide inhibit growth of I. calvum C5 by disrupting distinct steps across multiple pathways, including branched-chain amino acid (BCAA) biosynthesis, utilization of specific carbon sources, and cofactor metabolism. Here, we have validated these predictions by demonstrating that complementation with BCAAs and specific carbon sources relieves the growth inhibitory effects of cysteine and hydrogen sulfide. We discuss how these mechanistic insights give new context to the interplay and stratification of NRB and SRB in diverse environments.
59 BASIC BIOLOGICAL SCIENCES↗
Simple thermal vapor deposition process for and characterization of n-type indium oxysulfide thin films
The search continues for alternative nontoxic n-type electron transport layers in optoelectronic thin-film devices. Indium oxysulfide, In 2 (O,S) 3 , represents one promising material for this application, especially when paired with chalcogenide absorber layers. The ternary nature of the composition allows for electrical conductivity and optical bandgap tuning by tailoring the sulfur to oxygen ratio in the oxysulfide alloy. However, thin films of In 2 (O,S) 3 are typically deposited only by chemical bath deposition or plasma-enhanced atomic layer deposition. Here we report deposition of thin films of In 2 (O,S) 3 in a custom-built thermal reactor using only water vapor and hydrogen sulfide as the coreactants. This advance is enabled by the use of a recently reported, highly reactive indium formamidinate precursor. As shown by x-ray photoelectron spectroscopy, the composition can be tuned from pure In 2 (O,S) 3 to pure In 2 S 3 by varying the ratio of cycles employing water or hydrogen sulfide. The oxygen to the sulfur ratio in the film can be controlled by altering the dose sequence, although films typically contain more sulfur than would be expected naively from the percentage of hydrogen sulfide doses in the deposition recipe. Rutherford backscattering spectrometry confirms the composition is sulfur-rich relative to the dosing ratio. Structural characterization indicates films are relatively amorphous in nature. Electrically, these films offer reasonably constant electron mobility at different O:S ratios, with an electron concentration tunable over 4 orders of magnitude. These oxysulfide films possess a higher indirect bandgap than their oxygen-free indium sulfide counterparts, indicating higher transmittance to blue light. These indium oxysulfide films may be suitable candidates for electron transport layers in thin-film solar cells where their wider bandgap might result in higher optical transparency and thus short circuit current density, while the tunability of their conduction band offset with an absorber layer may result in higher open circuit voltage.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Molecular basis of C-S bond cleavage in the glycyl radical enzyme isethionate sulfite-lyase
Desulfonation of isethionate by the bacterial glycyl radical enzyme (GRE) isethionate sulfite-lyase (IslA) generates sulfite, a substrate for respiration that in turn produces the disease-associated metabolite hydrogen sulfide. Here, we present a 2.7 Å resolution X-ray structure of wild-type IslA from Bilophila wadsworthia with isethionate bound. In comparison with other GREs, alternate positioning of the active site β strands allows for distinct residue positions to contribute to substrate binding. These structural differences, combined with sequence variations, create a highly tailored active site for the binding of the negatively charged isethionate substrate. Through the kinetic analysis of 14 IslA variants and computational analyses, we probe the mechanism by which radical chemistry is used for C-S bond cleavage. This work further elucidates the structural basis of chemistry within the GRE superfamily and will inform structure-based inhibitor design of IsIA and thus of microbial hydrogen sulfide production.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Geochemical and Microbial Dynamics of Hydrogen in a Methane Storage Reservoir
Hydrogen has been identified as a flexible energy carrier with zero or negative emission across multiple energy systems, and existing natural gas infrastructure could be leveraged if hydrogen gas (H2) was blended with methane (CH4). For example, subsurface methane storage reservoirs could be slightly modified to also store hydrogen if a methane/hydrogen blend were injected. However, the compatibility of methane storage reservoirs to include H2 injection has not been fully demonstrated, and this could lead to geochemical and microbiological reactions that alter the reservoir and stored gas content. It is essential that we understand the impact of H2 gas on the biogeochemistry of subsurface storage reservoirs before deploying large-scale H2-CH4 storage, We collected produced fluid from two separate methane storage reservoirs in the Southwestern US. First, we completed a baseline analysis of the biogeochemistry through qPCR, 16S rRNA sequencing, metagenomic sequencing, and geochemical analysis. Each reservoir was found to have unique geochemical conditions and a unique microbial community structure, with Site 1 having a higher TDS and an abundance of Shewanella and Site 2 having a lower TDS and high abundance of Eubacterium and Acetobacterium. Next, we ran a series of high pressure, high temperature reactors under hydrogen storage conditions with the biological sample from one of the storage reservoirs and a 20% H2-80% CH4 gas blend for up to 7 days. Our results show a decrease of hydrogen by 5% in reactors as early as 1-3 days. Previous hydrogen storage work has linked subsurface microorganisms with methanogenesis hydrogen sulfide production, acid production, and microbial corrosion. Our results show minimal change in the fluid chemistry, with the exception of a decrease in dissolved sulfate concentrations. Taxonomic sequencing demonstrated the presence of microorganisms capable of iron redox, acid generation, and hydrogen sulfide production throughout the reactors, suggesting microbial hydrogen consumption may occur through various metabolic pathways. This work demonstrates that site-specific geochemistry and microbiology may impact the efficiency of hydrogen storage in methane storage reservoirs.
environmental microbiology↗
The Microbial Community and Functional Potential in the Midland Basin Reveal a Community Dominated by Both Thiosulfate and Sulfate-Reducing Microorganisms
The Permian Basin is the highest producing oil and gas reservoir in the United States. Hydrocarbon resources in this region are often accessed by unconventional extraction methods, including horizontal drilling and hydraulic fracturing. Despite the importance of the Permian Basin, there is no publicly available microbiological data from this region. We completed an analysis of Permian produced water samples to understand the dynamics present in hydraulically fractured wells in this region. We analyzed produced water samples taken from 10 wells in the Permian region of the Midland Basin using geochemical measurements, 16S rRNA gene sequencing, and metagenomic sequencing. Compared to other regions, we found that Permian Basin produced water was characterized by higher sulfate and lower total dissolved solids (TDS) concentrations, with a median of 1,110 mg/L and 107,000 mg/L. Additionally, geochemical measurements revealed the presence of frac hits, or interwell communication events where an established well is affected by the pumping of fracturing fluid into a new well. The occurrence of frac hits was supported by correlations between the microbiome and the geochemical parameters. Our 16S rRNA gene sequencing identified a produced water microbiome characterized by anaerobic, halophilic, and sulfur reducing taxa. Interestingly, sulfate and thiosulfate reducing taxa including Halanaerobium, Orenia, Marinobacter, and Desulfohalobium were the most prevalent microbiota in most wells. We further investigated the metabolic potential of microorganisms in the Permian Basin with metagenomic sequencing. We recovered 15 metagenome assembled genomes (MAGs) from seven different samples representing 6 unique well sites. These MAGs corroborated the high presence of sulfate and thiosulfate reducing genes across all wells, especially from key taxa including Halanaerobium and Orenia. The observed microbiome composition and metabolic capabilities in conjunction with the high sulfate concentrations demonstrate a high potential for hydrogen sulfide production in the Permian Basin. Additionally, evidence of frac hits suggests the possibility for the exchange of microbial cells and/or genetic information between wells. This exchange would increase the likelihood of hydrogen sulfide production and has implications for the oil and gas industry.
16S RNA↗
Theoretical and kinetic modeling study of H 2 S pyrolysis
Hydrogen sulfide pyrolysis was investigated theoretically and through chemical kinetic modeling. Reactions on the SHH potential energy surface, primarily S + H 2 (+Ar) ⇌ H 2 S (+ Ar) (R1) and S + H 2 ⇌ SH + H (R6b) were characterized by ab initio calculations. Results for k 1 were in good agreement with experiment, but deviated strongly below 2000 K from values previously used in modeling. Collider efficiencies for H 2 S, S 2 , and N 2 compared to Ar were calculated for R1. Hydrogen sulfide decomposition experiments reported in literature were re-examined in terms of an updated detailed chemical kinetic model. Concentration profiles for the atomic S at high temperature in shock tubes supported the present value of k 1 and served to constrain the rate constants for reaction of S with SH and H 2 S. To explain results from batch and flow reactors, conducted at high H 2 S concentrations in the 900–1400 K range, a very fast rate constant was required for HSS + H ⇌ SH + SH. Under dilute conditions, the gas-phase chemistry was too slow to compete and the decomposition of H 2 S was controlled by loss on the reactor surface.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Sulfoquinovose is exclusively metabolized by the gut microbiota and degraded differently in mice and humans
Abstract Background Sulfoquinovose (SQ) is a green-diet-derived sulfonated glucose and a selective substrate for a limited number of human gut bacteria. Complete anaerobic SQ degradation via interspecies metabolite transfer to sulfonate-respiring bacteria produces hydrogen sulfide, which has dose- and context-dependent health effects. Here, we studied potential SQ degradation by the mammalian host and the impact of SQ supplementation on human and murine gut microbiota diversity and metabolism. Results 13 CO 2 breath tests with germ-free C57BL/6 mice gavaged with 13 C-SQ were negative. Also, SQ was not degraded by human intestinal cells in vitro, indicating that SQ is not directly metabolized by mice and humans. Addition of increasing SQ concentrations to human fecal microcosms revealed dose-dependent responses of the microbiota and corroborated the relevance ofAgathobacter rectalisandBilophila wadsworthiain cooperative degradation of SQ to hydrogen sulfide via interspecies transfer of 2,3-dihydroxy-1-propanesulfonate (DHPS). Similar to the human gut microbiome, the genetic capacity for SQ or DHPS degradation is sparsely distributed among bacterial species in the gut of conventional laboratory mice.Escherichia coliandEnterocloster clostridioformiswere identified as primary SQ degraders in the mouse gut. SQ and DHPS supplementation experiments with conventional laboratory mice and their intestinal contents showed that SQ was incompletely catabolized to DHPS. Although someE. clostridioformisgenomes encode an extended sulfoglycolytic pathway for both SQ and DHPS fermentation, SQ was only degraded to DHPS by a mouse-derivedE. clostridioformisstrain. Conclusions Our findings suggest that SQ is solely a nutrient for the gut microbiota and not for mice and humans, emphasizing its potential as a prebiotic. SQ degradation by the microbiota of conventional laboratory mice differs from the human gut microbiota by absence of DHPS degradation activity. Hence, the microbiota of conventional laboratory mice does not fully represent the SQ metabolism in humans, indicating the need for alternative model systems to assess the impact of SQ on human health. This study advances our understanding of how individual dietary compounds shape the microbial community structure and metabolism in the gut and thereby potentially influence host health.
Microbiology↗
Microbial ecology of acidic, biogenic gypsum: community structure and distribution of extremophiles on freshly formed and relict sulfate deposits in a hydrogen sulfide-rich cave
Sulfate minerals are abundant on the Martian surface, and many of these evaporite deposits are thought to have precipitated from acidic fluids. On Earth, gypsum (CaSO 4 •2H 2 O) and other sulfates sometimes form under acidic conditions, so exploring the extremophilic life that occurs in these mineral environments can help evaluate the astrobiological potential of acid sulfate depositional settings. Here, we characterized the microbial communities associated with acidic gypsum deposits in a sulfuric acid cave, where sulfate precipitation is driven by sulfide-oxidizing bacteria and archaea. We used 16S rRNA gene sequencing and cell counts to characterize gypsum-associated microorganisms in freshly formed and relict deposits throughout the cave, to test how microbial community composition and abundance would vary with distance from the sulfidic water table and with the concentration of H 2 S(g) and other gases in the cave atmosphere. We found that actively forming gypsum in the lower cave levels was colonized by low-diversity communities that have few cells compared to other environments in the cave. The most abundant taxa were Acidithiobacillus, Metallibacterium, Mycobacteria, and three different Thermoplasmatales-group archaea, which occupied distinct niches based on proximity to sulfidic streams and the concentration of gases in the cave air. By contrast, deposits in older cave levels had more diverse communities that were distinct from those associated with freshly formed gypsum and likely represent a community reliant on different energy resources. These findings show that acidic sulfate deposits serve as habitats for extremophilic microorganisms and broaden our knowledge of the life associated with terrestrial sulfates.
58 GEOSCIENCES↗