SEARCH · Engineering Papers

Results for “Horiba”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

7 records

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Modifying Network Guided Vehicle for Repeatable EcoCAR ACC Energy Testing

The newest iteration of the Department of Energy (DOE) Advanced Vehicle Technology Competitions is the EcoCAR Mobility Challenge. In this paper, ANL and HORIBA MIRA collaborate to propose and pilot a test method that enables controlled, repeatable track-based energy consumption testing of semi-autonomous features. The testing was performed at MIRA’s proving ground facility in Nuneaton, UK, using their Network Guided Vehicle (NGV) connectivity and automation test platform. The NGV served as a repeatable lead vehicle following prescribed drive traces around two different track circuits while the host vehicle under test, a Honda Civic with full speed range Adaptive Cruise Control, followed behind. Over the course of a two day test, multiple iterations of certification and custom EPA drive traces were performed on track, demonstrating the viability of a two vehicle energy test. Results were analyzed to assess NGV lead vehicle performance in following the prescribed cycle using SAE J2951 standard calculations in an effort to quantify how repeatably and accurately the lead vehicle followed the trace. Host vehicle energy consumption was assessed using both vehicle CAN bus monitoring and an on-board fuel flow meter.

ACC↗

DOE OSTI2021

Partial Premixing Effects on the Reacting Jet of a High-Pressure Axially Staged Combustor

The effects of partial premixing on a reacting jet-in-crossflow is investigated in a five atmosphere axially staged combustor at stationary gas turbine relevant conditions. The facility consists of a dump style headend burner that provides a crossflow with a quasi-uniform velocity and temperature profile to the axial stage to isolate the effects of the jet-in-crossflow. The headend burner is run with methane and air at a lean equivalence ratio to match industry emission standards. For this work, the total air to the headend and axial stage is kept constant, and fuel is split between the headend and axial stage to represent different gas turbine loading conditions. For the cases analyzed, the fuel split to the axial stage went up to 25%. The axial stage consists of an optically accessible test section with a coaxial injector that provides variability to how long the methane and air can mix before entering the facility. Three different premixed levels are studied: fully premixed, nonpremixed, and partially premixed. The flow-field characteristics of the reacting jet-in-crossflow are analyzed using particle image velocimetry (PIV), and flame behavior is quantified by employing CH* chemiluminescence. NO measurements are made at the exit of the facility using a Horiba emissions analyzer. Furthermore, two different flames are observed: flames that burn in the leeward recirculation region and flames that burn at the core of the jet.

03 NATURAL GAS↗

DOE OSTI2021

Protocols for Uranium Carbon Analysis

In 1998, MST-6 (now SIGMA) installed a Horiba EMIA-8200 Carbon/Sulfur analyzer to provide the ability to perform in-house chemical analysis on a variety of materials including uranium. While many of the results and procedures were detailed in program files, no compiled record of the overall analytic process was ever published. This retrospective utilizes existing logbooks, operator interviews, instrument manuals, and notes to catalog what is known about the past procedures and protocols for carbon analysis that were established and present the data informing those decisions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Synthesis‐Related Nanoscale Defects in Mo‐Based Janus Monolayers Revealed by Cross‐Correlated AFM and TERS Imaging

2D Janus transition metal dichalcogenides (TMDs) are promising candidates for various applications including non-linear optics, energy harvesting, and catalysis. These materials are usually synthesized via chemical conversion of pristine TMDs. Nanometer-scale characterization of the obtained Janus materials’ morphology and local composition is crucial for both the synthesis optimization and the future device applications. In this work, we present the results of cross-correlated atomic force microscopy (AFM) and tip-enhanced Raman spectroscopy (TERS) study of Janus monolayers synthesized by the hydrogen plasma-assisted chemical conversion of MoSe 2 and MoS 2 . We demonstrate that the choice of both the growth substrate and the starting TMD influences the residual strain, thereby shaping the nanoscale morphology of the resulting Janus material. Furthermore, by employing TERS imaging, we show the presence of nanoscale islands (≈20 nm across) of MoSe 2 - ${\mathrm{Mo}}_{{\mathrm{Se}}}^{\mathrm{S}}$ (MoS 2 -${\mathrm{Mo}}_{\mathrm{S}}^{{\mathrm{Se}}}$) vertical heterostructures originating from the bilayer nanoislands in the precursor monolayer crystals. The understanding of the origins of nanoscale defects in Janus TMDs revealed in this study can help with further optimization of the Janus conversion process towards uniform and wrinkle-/crack-free Janus materials. Moreover, this work shows that cross-correlated AFM and TERS imaging is a powerful and accessible method for studying nanoscale composition and defects in Janus TMD monolayers.

2D materials↗

DOE OSTI2025

Excitation Laser Energy Dependence of the Gap-Mode TERS Spectra of WS 2 and MoS 2 on Silver

In this work we present a systematic study of the dependence of the gap mode tip-enhanced Raman scattering (TERS) response of the mono- and bi-layer WS 2 and MoS 2 on silver as a function of the excitation laser energy in a broad spectral range from 473nm to 830 nm. For this purpose, we collected consecutive TERS maps of the same area in the sample containing mono-and bi-layer regions with the same TERS probe with 6 different excitation lasers. To decrease the number of collected TERS maps, we used for the first time to the best of our knowledge, concurrent excitation and collection with two lasers simultaneously. We found that the E 2g /A 1g peak intensity ratio for the bilayer WS 2 @Ag and the ratio of the A’/A 1g peak intensity of the out-of-plane mode for the mono- and the bilayer, change in a significantly non-monotonous way as the excitation laser energy is swept from 1.58 eV to 2.62 eV. The former ratio increases at energies corresponding to A and B excitons (~2.0 eV and 2.4 eV correspondingly) in bilayer WS 2 . The absolute intensity of the A’ peak in the monolayer, and correspondingly the A’/A 1g ratio, is surprisingly high at lower excitation energies, but dips dramatically at the energy corresponding to the A exciton, being restored partially in between A and B excitons, but still showing the descending trend as the excitation laser energy increases. A somewhat similar picture was observed in mono- and bi-layers of MoS 2 @Ag, though the existing set of excitation lasers did not match the excitonic profile of this material as nicely as for the case of WS 2 . We attribute the observed behavior to the presence of intermediate (Fano resonance) or strong (Rabi splitting) coupling between the excitons in transition metal dichalcogenides (TMDs) and the plasmons in the tip-substrate nanocavity. This is akin to the so-called Fano (Rabi) transparency experimentally observed in far field scattering from transition metal dichalcogenides between two plasmonic metals. The possibility of the formation of intermediate/strong coupling between the excitonic resonances in TMDs and the nanocavity re-evaluates the role of various resonances in the gap-mode TERS and should become an important factor to be considered by TERS practitioners during planning the experiments. Lastly, based on observed phenomena and its explanation, we propose the “ideal” substrate for efficient TERS and tip enhanced photoluminescence (TEPL) measurements.

Raman spectroscopy↗

DOE OSTI2025

Probing specific ion effects at air-aqueous dibutyl phosphate interfaces using vibrational sum frequency generation spectroscopy

Molecular properties at air–liquid and liquid–liquid interface hold the key to many processes involving molecular transport across phase boundaries from aerosol formation to carbon cycling and material separation using solvent extraction techniques. Using dibutyl phosphate (DBP) as a representative for partially aqueous soluble surfactants, the specific ion effect (SIE) of the Hofmeister series cations Cs + , Na + , Li + , and Mg 2+ on the partition and interaction between surfactant molecules and water molecules in the air–aqueous interface are investigated using vibrational sum frequency generation spectroscopy and surface tension measurements. In the presence of 1 mM and 1M bulk aqueous phase ionic strength salt concentrations, fundamental qualitative relationships are observed for the salting out of DBP relative to bulk aqueous phase nitrate salt concentrations and the specific cations species. At 1 mM ionic strength, the interfacial charge and hence the interfacial potential modulates the electrostatic interactions; in particular, the counter cations partially screen the negatively charged interface induced by the DBP in a direct Hofmeister order. At 1M ionic strength, the electric field at the interface or interfacial potential is effectively neutralized, and the counter cations promote the partitioning of DBP to the interface depending on their specific interaction with the DBP head group and metal ion hydration properties. The present results lay a foundation to study SIEs of heavier metals on hydrophobic-aqueous DBP interfaces.

Louie, Christina [Washington State University, Pul↗

DOE OSTI2022

Fermiology of a topological line-nodal compound CaSb 2 and its implication to superconductivity: Angle-resolved photoemission study

Here, we performed angle-resolved photoemission spectroscopy with microfocused beam on a topological line-nodal compound CaSb 2 which undergoes a superconducting transition at the onset T c ~ 1.8 K, to clarify the Fermi-surface topology relevant to the occurrence of superconductivity. We found that a three-dimensional hole pocket at the Γ point is commonly seen for two types of single-crystalline samples fabricated by different growth conditions. On the other hand, the carrier-doping level estimated from the position of the chemical potential was found to be sensitive to the sample fabrication condition. The cylindrical electron pocket at the Y(C) point predicted by the calculations is absent in one of the two samples, despite the fact that both samples commonly show superconductivity with similar T c 's. This suggests a key role of the three-dimensional hole pocket to the occurrence of superconductivity, and further points to an intriguing possibility to control the topological nature of superconductivity by carrier tuning in CaSb 2 .

36 MATERIALS SCIENCE↗