Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High energy density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High Energy Density Physics of Inertial Confinement Fusion Ablator Materials

The historic December 5, 2022 experiment at Lawrence Livermore National Lab’s (LLNL) National Ignition Facility (NIF) reached fusion energy ignition for the first time. This is the most important scientific breakthrough of the 21st century paves the way to future clean inertial fusion energy (IFE). The diamond (high density carbon (HDC)) ablator material used in this experiment displays detrimental effects due to the development of hydrodynamic instabilities at the diamond/fuel interface under shock compression. New alternatives to diamond ablators are required to step up the energy yield in ICF experiments. The unique combination of mechanical strength (approaching that of diamond), the ability to accommodate high-Z dopants (in contrast to diamond), and the tunability of the properties (through synthesis material with varying sp 3 content) make amorphous carbon (a-C) a promising material for next-generation IFE ablative capsules. However, despite its critical importance to the IFE program, the behavior of a-C carbon at extreme temperatures and pressures remains largely unexplored. The primary goals of this project were to perform groundbreaking dynamic compression experiments and predictive simulations to uncover the fundamental high-energy-density physics of amorphous carbon. Our goals were (1) to uncover the metastability range of amorphous carbon and probe phase transitions to diamond or metastable supercooled liquid carbon; (2) to acquire high-quality equation of state (EOS) data and develop an experimentally validated EOS from machine-learning MD simulations of the complex states of carbon; and (3) to uncover the complex behavior of carbon liquid in both thermodynamically stable and metastable supercooled states by accessing large areas of carbon phase diagram with amorphous samples with variable sp 3 content. Our proposed experimental program included measurements of equation of state and diffraction measurements using the Omega EP laser at the Laboratory of Laser Energetics at the University of Rochester. The theoretical/simulation program involved the development of machine-learning models of the complex response of amorphous carbon under dynamic compression by performing molecular dynamics simulations at experimental time and length scales using leadership class DOE supercomputers. Simulations guided experiments to observe predicted phenomena and acquire critical experimental data in specific pressure-temperature domains to validate theoretical models. This research delivered fundamental properties of novel amorphous carbon IFE ablator material, including phase diagram and EOS. These results will aid in IFE target design and implosion experiments. A unique combination of predictive simulations and dynamic and static experiments provided a highly inspirational intellectual environment for graduate students and postdocs involved in this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Magnetogenesis Mechanisms Through Wave Interactions in High Energy Density Plasma (Final Technical Report)

This final technical report identifies and explores systematically mechanisms of current generation and magnetogenesis in both natural and laboratory high energy density (HED) plasma settings, These mechanisms involve wave-plasma interactions. Current generation mechanisms that have been developed in other settings can be applied in new ways to high energy density plasma environments. Mechanisms that have been overlooked or considered negligible in less extreme settings may play a role in the high energy density plasma, where considerable free energy could be available in the form of intense waves or particle motion which in turn can create intense wave energy. These mechanisms may be present naturally in astrophysical settings or they may be arranged in laboratory settings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Oxygen Opacity Measurements at High-Energy-Density Conditions

We present the first benchmark measurements of oxygen opacity at high-energy-density, crucial for understanding stellar interiors. A 3–5−μm thick SiO 2 sample was heated using a Z facility x-ray source, and opacity was measured in the 5–19.5 Å range with multiple spectrometers. The electron temperature and density inferred from Si 𝐾-shell spectra were 148 ± 4 eV and 8.6 ±1.4 × 10 21 cm −3 , respectively. Six experiments showed opacity reproducibility within ±15% and 5%–25% opacity uncertainty. Measured oxygen opacity and seven different opacity models exhibit extraordinary overall agreement. Discrepancies near the H-like photon ionization threshold and in certain spectral lines suggest the need for model refinements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Flow visualization in high-energy-density laboratory plasmas

Flow visualization is often essential for evaluating high-energy-density (HED) laboratory plasmas, examining their dynamics, and assessing design strategies. However, imaging at fine phenomenological flow scales is a major challenge. Here, a zone-plate–based radiography system tailored for applications in HED physics is demonstrated. The burst-mode radiography system combines a dual-flash laser-generated x-ray source, a high-magnification zone plate optic, and a multiple frame hybrid complementary metal-oxide-semiconductor (hCMOS) sensor for image detection. Operating at a magnification of 42 x⁠, a pair of radiographs is measured in rapid succession, each time gated by a 4.75 keV flash of x rays lasting 100 ps. The system achieves a spatial resolution below 3 μm. The potential of this approach for applications in HED physics is exemplified by observing small-scale spike morphologies at a pusher-foam interface impacted by a strong, laser-driven blast wave.

Flow instabilities↗
DOE OSTI2025

Particle-in-cell simulations of expanding high energy density plasmas with laser ray tracing

The design and analysis of high energy density (HED) laser experiments typically rely on radiation hydrodynamics simulations. However, some laser–plasma interaction regimes are not collisional and cannot be adequately modeled with hydrodynamics. For example, strongly driven magnetic reconnection and magnetized collisionless shock experiments possess extended hydrodynamic or even kinetic properties, necessitating first-principles kinetic simulations. In this paper, we present the benchmarking and first results obtained with a laser-ray-tracing and inverse bremsstrahlung absorption module implemented in the particle-in-cell code PSC. The simulation results are compared to radiation hydrodynamic simulations using the FLASH code as well as analytical estimates. We successfully benchmark the energy deposition model and overall hydrodynamic evolution of the systems. We also consider possible kinetic effects that may be expected from laser-target ablation in the HED regime, including non-local transport and two-temperature effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Development of Li–S Battery Cells with High Energy Density and Long Cycling Life

Lithium–sulfur (Li–S) batteries are considered one of the most promising next-generation energy storage technologies for electric vehicles, owing to their high energy density (up to three times greater than current lithium-ion batteries) and the low cost of sulfur (approximately 100 times cheaper than conventional cobalt oxide). However, several challenges hinder their commercial viability, including the electronically and ionically insulating nature of sulfur, polysulfide dissolution, and lithium dendrite growth. These issues significantly limit battery energy density and cycle life and must be addressed to enable successful commercialization. Current strategies involving porous carbon structures, additives, and electrocatalyst engineering have not fully resolved the polysulfide dissolution problem. While polysulfide-free cathode materials offer a promising solution, they often suffer from low sulfur content, leading to reduced discharge capacity and sluggish reaction kinetics. To overcome these limitations, we have developed novel soluble-polysulfide-free sulfur cathode active materials with a high sulfur content (>50 wt%). By integrating these cathodes with functional binders, optimized electrolyte formulations, and refined electrode fabrication techniques, we demonstrate Li–S batteries with both high energy density and long cycle life. This advancement brings the realization of low-cost, high-energy Li–S batteries significantly closer to practical application.

25 ENERGY STORAGE↗
DOE OSTI2026

Upcycling mixed cathode materials to high-energy-density LiFe 0.75 Mn 0.25 PO 4

To address the demand for next-generation cathode materials with high energy density, upcycling LiFePO 4 into LiFe 0.75 Mn 0.25 PO 4 has attracted considerable attention. Nevertheless, existing strategies have yet to achieve both morphology and full elemental recovery under mild ambient conditions. Here, we report an upcycling route that can address this issue by combining leaching and a high-temperature treatment process. The upcycled LiFe 0.75 Mn 0.25 PO 4 exhibits enlarged lattice spacing and a high discharge plateau, and it delivers an energy density of 563.7 Wh/kg, 40.3 Wh/kg higher than recycled LiFePO 4 , which indicates the high value of the proposed upcycling strategy. At 1 C, LiFe 0.75 Mn 0.25 PO 4 also exhibits excellent cycling stability of 91% over 700 cycles. Techno-economic analysis also indicates impressive economic and environmental benefits, including 10.4% less raw materials usage and 12.2% less energy consumption and wastewater generation. This work demonstrates a scalable and economic upcycling strategy and provides a promising pathway for sustainable battery upcycling compatible with industrial conditions.

LMFP↗
DOE OSTI2025

Molecular Interlocking Multidimensional Modulations of Cathode‐Electrolyte Interface for Constructing High Energy Density Quasi‐Solid‐State Batteries

Gel polymers are regarded as a promising candidate electrolyte for lithium-metal quasi-solid-state batteries, primarily due to their high ionic conductivity and solid-liquid synergistic properties. However, challenges such as interfacial side reactions, limitations in Li + transport caused by interfacial issues, and leaching of transition metals from the cathode have yet to be effectively solved. Herein, a novel gel electrolyte modulation strategy based on electrostatic filler assembly is proposed to address the issues of ineffective capacity utilization and inadequate cycling stability of high-energy-density cathode materials in solid-state lithium-ion batteries. It constructs a 3D interpenetrating charge-bridge network that effectively tackles the phase-separation challenge between fillers and electrolytes at the molecular level. Meanwhile, the molecular interlocking structure effectively inhibits the electrolyte erosion. More critically, it optimizes and stabilizes the cathode-electrolyte interface film, which facilitates the conduction of Li + -ions through a size-sieving mechanism. Consequently, this strategy enables effective adaptation across diverse high-energy-density cathode materials with satisfactory capacity performance (170.4 mAh g −1 at 4.5 V/1 C for LiNi 0.6 Co 0.2 Mn 0.2 O 2 and 194.0 mAh g −1 at 4.3 V/1 C for LiNi 0.9 Co 0.08 Mn 0.02 O 2 ). In conclusion, this investigation offers a straightforward and effective reference for addressing the critical challenges of ionic transport and interface stabilization in the design of gel electrolytes.

cathode-electrolyte interface↗
DOE OSTI2025

Measurement of interfacial thermal resistance in high-energy-density matter

Heat transport across interfaces is a ubiquitous phenomenon with many unresolved aspects. In particular, it is unknown if an interfacial thermal resistance (ITR) occurs in matter with high-energy-density where free electrons dominate the heat conduction. Here, we report on the first experimental evidence that a significant heat barrier is present between two different regions of high-energy-density matter: a strongly heated tungsten wire and a surrounding plastic layer that stays relatively cold. We use diffraction-enhanced imaging to track the time evolution of density discontinuities and reconstruct the temperature evolution in the quasi-stationary stage. The clear signatures of a temperature jump demonstrate the importance of the ITR for strongly heated systems with far-reaching implications for interpreting experiments and applications like inertial confinement fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Development and characterization of a laser-gated, high resolution x-ray radiography platform for high energy density experiments using toroidally bent crystals

Bent crystal x-ray imagers are a well-established diagnostic tool to study high energy density (HED) objects by acquiring two-dimensional x-ray radiographs. Often, studying these HED objects requires very high spatial resolution, which is limited by astigmatism when using spherically bent crystals. By using toroidal-shaped crystals instead, astigmatism can be reduced and the overall spatial resolution of the instrument improved. Here, the development and characterization of a laser-gated x-ray radiography platform at the National Ignition Facility using a toroidal crystal is presented. This includes measurements of the spatial and temporal profile, which is determined by the x-ray source. In conclusion, to properly validate the reduced astigmatism, a new multi-plane grid approach was implemented, which, for the first time, allows a depth of field measurement, alignment verification and x-ray source size estimate in a single shot, demonstrating the current platform’s capability to provide sub-10 μm resolution over a 0.9 mm depth of field with a temporal resolution of 110 ps.

Crystal optics↗
DOE OSTI2026

New Engineering Concepts to High Energy Density Li-S Batteries

Li-S batteries (LSBs) with energy densities > 500 Wh/kg @ C/5 and >1000 cycles, cycle life operating over wide temperatures has been identified to be critical for meeting the global energy demands. Progress is however, very much limited due to several major hurdles related to the following: (a) poor Li' reaction kinetics (conductivity/diffusivity) enabling full reversible S conversion to Li2S, (b) inferior electron (e) conductivity, specific capacity and cycle life due to electrolyte soluble species of polysulfides (PSs) formed with the reaction of Li ions with sulfur migrating to anode, (c) unstable solid electrolyte interphase (SEI) formation and finally, (d) dendrites that are formed on the Li metal anode severely limiting the cycle life due to polarization at the solid/liquid interfaces causing safety, inferior capacity, energy density, rate, and cycle life issues. Creation of a fully functional economical ≤$80/kWh, high energy density LSBs is vital for enabling its widespread commercial deployment and use in current and next generation electric vehicles.

25 ENERGY STORAGE↗
DOE OSTI2025

Demonstration of x-ray fluorescence spectroscopy as a sensitive temperature diagnostic for high-energy-density physics experiments

We present the use of x-ray fluorescence spectroscopy (XFS) to a sensitive temperature diagnostic in shocked foams at temperatures of 30–75 eV. Cobalt-doped foams were shock compressed using a planar drive at the OMEGA laser facility and photo-pumped with a Zn He⁢𝛼 x-ray source. Analysis of the resulting cobalt 𝐾⁢𝛽 x-ray fluorescence spectra using collisional radiative codes allows the temperature to be determined in the shocked foams. Furthermore, this method provides a sensitive and robust technique to determine temperatures in high-energy-density physics experiments in the tens of electronvolts temperature range. In these experiments, we find that radiation hydrodynamic simulations predict a lower temperature in the shocked foams compared to analysis of the XFS data using collisional radiative models. Although additional experiments with an independent temperature diagnostic to absolutely calibrate XFS spectra for these conditions will be required to resolve this discrepancy, these results demonstrate the excellent temperature sensitivity of XFS spectra for high-energy-density physics experiments.

Atomic spectra↗
DOE OSTI2026

Physics of Ultra-High Energy Density Relativistic Plasmas from Ordered Nanostructures

This award funded a four-year program at Colorado State University on the physics of ultra-high energy density plasmas generated by focusing femtosecond, >1021 Wcm-2 laser pulses onto ordered nanowire arrays. We used the ALEPH petawatt-class Ti:Sa laser with its high contrast 400 nm second harmonic beamline to irradiate arrays of Ni and TiO2 nanowires made by template assisted electrodeposition and atomic layer deposition over a wide range of average densities. We met two of the three original project goals: radial ion acceleration via doppler shifted K shell emission, and time and spectrally resolved K shell measurements. The main experimental advance was integrating the Lawrence Livermore National Laboratory (LLNL) TREX ultrafast x-ray streak camera with a suite of spherically bent quartz Bragg crystal spectrometers built using Princeton Plasma Physics Laboratory (PPPL) methodology. This is the first TREX-on-bent-quartz setup fielded at a femtosecond, >1021 Wcm-2 facility. It is now a permanent diagnostic at ALEPH and is offered to the LaserNetUS user community. The program produced three peer reviewed journal articles that acknowledge this award. The platform will continue at the upgraded CSU ATLAS facility, where the ALEPH laser is being upgraded to 2 PW.

Hollinger, Reed [Colorado State University]↗
DOE OSTI2025

High Energy Density Physics of Inertial Confinement Fusion Ablator Materials (Final Technical Report)

The goal of this project was to conduct dynamic compression experiments and predictive simulations to reveal the fundamental high-energy-density (HED) physics of amorphous carbon. These results are essential for assessing amorphous carbon as a potential ablator material for next generation of inertial confinement fusion (ICF) capsules. We made significant progress in exploring the HED properties of amorphous carbon through experiments at Omega EP Laser and the European XFEL, in addition to billion-atom, quantum-accurate molecular dynamics (MD) simulations. Through our joint experimental and simulation program, we mapped the phase diagram of amorphous carbon, uncovering its range of metastability and identifying phase transitions to diamond and liquid carbon along the Hugoniot and at higher pressures using double shock compression pathways. Our findings indicate that amorphous carbon melts at significantly lower shock pressures than high-density carbon (diamond). However, nanocrystalline diamond nucleates across a broad range of pressures and temperatures. This emergence of the nanocrystalline microstructure during compression can negatively impact the planarity of the shock front and potentially trigger ablator/fuel mixing during Inertial Fusion Energy (IFE) applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Advancing sustainable aviation fuel with high-energy-density bicycloalkanes production from corn stover mixed sugars

Bicycloalkanes stand out as a replacement for aromatics from conventional jet fuel (CJF) because of their high energy density and lower freezing point. Most reports to date have focused on synthesizing bicycloalkanes using model compounds or single sugar components of lignocellulose. Here, we utilize all lignocellulosic sugars of corn stover (CS) to produce bicycloalkanes. First, furfural (FFR) and 5-hydroxymethyl furfural (5-HMF) are produced via acid-catalyzed dehydration, achieving combined FFRs molar yields ranging from 65% to 73%, respectively. The resulting FFRs are converted to cyclopentanones with molar yields within the range of 57%–63% via hydrogenation and Piancatelli rearrangement. Further aldol condensation of cyclopentanones yields C 10 -C 12 oxygenates with 80 mol %. Lastly, these oxygenates are directly hydrodeoxygenated to bicycloalkanes in a yield of 83.8 mol %. The resulting bicycloalkanes exhibit tier α fuel properties consistent with Jet A fuel (CJF) specifications and blend compatibility with CJF at a 37% volumetric ratio.

09 BIOMASS FUELS↗
DOE OSTI2026

Exploring high-intensity laser-driven secondary sources via high-order spectral pulse shaping for high-energy-density experiments

We present here the results of an investigation that aims to explore the impact of spectral pulse shaping on the generation of high-energy electrons (>1 MeV) and x rays (∼5–9 keV) using a high-intensity (I∼10 21 W/cm 2 ) laser system. The study involved a systematic scan of a broad parameter space in group delay dispersion and third-order dispersion, with variations up to 4 × 10 3 fs −2 and 6 × 10 4 fs −3 , respectively, to identify optimal conditions for enhancing secondary source yields. Several spectral phase conditions were found to significantly enhance the generation of hot electrons and x rays by amounts reaching up to 50% relative to the transform-limited pulse. The experiment, conducted at the Scarlet laser facility (800 nm, 5 J, 30 fs) at the Ohio State University, highlights the potential of spectral pulse shaping as a powerful tool for tuning secondary laser-driven sources. These findings are particularly relevant for advancing brighter x-ray and electron probes for high-energy-density science.

Physics - Plasma physics↗
DOE OSTI2024

Study of x-ray fluorescence spectroscopy from high-energy-density plasmas (Final Report)

The primary objective of this subcontract was to support the development of x-ray fluorescence spectroscopy (XFS) as a diagnostic tool for high-energy-density (HED) plasmas. Several experimental campaigns were completed to develop and benchmark XFS at various plasmas conditions of interest for inertial confinement fusion and HED science. The experimental measurements at the Omega laser facility used x-ray absorption spectroscopy (XAS) to determine the plasma temperature from the shape of the K-edge to benchmark XFS data. During the course of these experiments, it was found that XAS can also constrain ionization from bound-bound absorption features, and it became a primary diagnostic in this study. Several experimental campaigns were conducted at the Omega laser facility to refine XAS and XFS measurements of warm dense copper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗