Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High energy density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Plasma polymerized high energy density dielectric films for capacitors

High energy density polymeric dielectric films were prepared by plasma polymerization of a variety of gaseous monomers. This technique gives thin, reproducible, pinhole free, conformable, adherent, and insoluble coatings and overcomes the processing problems found in the preparation of thin films with bulk polymers. Thus, devices are prepared completely in a vacuum environment. The plasma polymerized films prepared all showed dielectric strengths of greater than 1000 kV/cm and in some cases values of greater than 4000 kV/cm were observed. The dielectric loss of all films was generally less than 1% at frequencies below 10 kHz, but this value increased at higher frequencies. All films were self healing. The dielectric strength was a function of the polymerization technique, whereas the dielectric constant varied with the structure of the starting material. Because of the thin films used (thickness in the submicron range) surface smoothness of the metal electrodes was found to be critical in obtaining high dielectric strengths. High dielectric strength graft copolymers were also prepared. Plasma polymerized ethane was found to be thermally stable up to 150 C in the presence of air and 250 C in the absence of air. No glass transitions were observed for this material.

Yamagishi, F. G.↗
NASA NTRS1968

Zinc-oxygen primary cell yields high energy density

Zinc-oxygen primary cell yields high energy density for battery used as an auxiliary power source in space vehicle systems. Maximum reliability and minimum battery weight is achieved by using a stacking configuration of 23 series-connected modules with 6 parallel-connected cells per module.

Graff, C. B.↗
DOE OSTI2025

High Energy Density Physics of Inertial Confinement Fusion Ablator Materials

The historic December 5, 2022 experiment at Lawrence Livermore National Lab’s (LLNL) National Ignition Facility (NIF) reached fusion energy ignition for the first time. This is the most important scientific breakthrough of the 21st century paves the way to future clean inertial fusion energy (IFE). The diamond (high density carbon (HDC)) ablator material used in this experiment displays detrimental effects due to the development of hydrodynamic instabilities at the diamond/fuel interface under shock compression. New alternatives to diamond ablators are required to step up the energy yield in ICF experiments. The unique combination of mechanical strength (approaching that of diamond), the ability to accommodate high-Z dopants (in contrast to diamond), and the tunability of the properties (through synthesis material with varying sp 3 content) make amorphous carbon (a-C) a promising material for next-generation IFE ablative capsules. However, despite its critical importance to the IFE program, the behavior of a-C carbon at extreme temperatures and pressures remains largely unexplored. The primary goals of this project were to perform groundbreaking dynamic compression experiments and predictive simulations to uncover the fundamental high-energy-density physics of amorphous carbon. Our goals were (1) to uncover the metastability range of amorphous carbon and probe phase transitions to diamond or metastable supercooled liquid carbon; (2) to acquire high-quality equation of state (EOS) data and develop an experimentally validated EOS from machine-learning MD simulations of the complex states of carbon; and (3) to uncover the complex behavior of carbon liquid in both thermodynamically stable and metastable supercooled states by accessing large areas of carbon phase diagram with amorphous samples with variable sp 3 content. Our proposed experimental program included measurements of equation of state and diffraction measurements using the Omega EP laser at the Laboratory of Laser Energetics at the University of Rochester. The theoretical/simulation program involved the development of machine-learning models of the complex response of amorphous carbon under dynamic compression by performing molecular dynamics simulations at experimental time and length scales using leadership class DOE supercomputers. Simulations guided experiments to observe predicted phenomena and acquire critical experimental data in specific pressure-temperature domains to validate theoretical models. This research delivered fundamental properties of novel amorphous carbon IFE ablator material, including phase diagram and EOS. These results will aid in IFE target design and implosion experiments. A unique combination of predictive simulations and dynamic and static experiments provided a highly inspirational intellectual environment for graduate students and postdocs involved in this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Magnetogenesis Mechanisms Through Wave Interactions in High Energy Density Plasma (Final Technical Report)

This final technical report identifies and explores systematically mechanisms of current generation and magnetogenesis in both natural and laboratory high energy density (HED) plasma settings, These mechanisms involve wave-plasma interactions. Current generation mechanisms that have been developed in other settings can be applied in new ways to high energy density plasma environments. Mechanisms that have been overlooked or considered negligible in less extreme settings may play a role in the high energy density plasma, where considerable free energy could be available in the form of intense waves or particle motion which in turn can create intense wave energy. These mechanisms may be present naturally in astrophysical settings or they may be arranged in laboratory settings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Oxygen Opacity Measurements at High-Energy-Density Conditions

We present the first benchmark measurements of oxygen opacity at high-energy-density, crucial for understanding stellar interiors. A 3–5−μm thick SiO 2 sample was heated using a Z facility x-ray source, and opacity was measured in the 5–19.5 Å range with multiple spectrometers. The electron temperature and density inferred from Si 𝐾-shell spectra were 148 ± 4 eV and 8.6 ±1.4 × 10 21 cm −3 , respectively. Six experiments showed opacity reproducibility within ±15% and 5%–25% opacity uncertainty. Measured oxygen opacity and seven different opacity models exhibit extraordinary overall agreement. Discrepancies near the H-like photon ionization threshold and in certain spectral lines suggest the need for model refinements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Flow visualization in high-energy-density laboratory plasmas

Flow visualization is often essential for evaluating high-energy-density (HED) laboratory plasmas, examining their dynamics, and assessing design strategies. However, imaging at fine phenomenological flow scales is a major challenge. Here, a zone-plate–based radiography system tailored for applications in HED physics is demonstrated. The burst-mode radiography system combines a dual-flash laser-generated x-ray source, a high-magnification zone plate optic, and a multiple frame hybrid complementary metal-oxide-semiconductor (hCMOS) sensor for image detection. Operating at a magnification of 42 x⁠, a pair of radiographs is measured in rapid succession, each time gated by a 4.75 keV flash of x rays lasting 100 ps. The system achieves a spatial resolution below 3 μm. The potential of this approach for applications in HED physics is exemplified by observing small-scale spike morphologies at a pusher-foam interface impacted by a strong, laser-driven blast wave.

Flow instabilities↗
DOE OSTI2025

Particle-in-cell simulations of expanding high energy density plasmas with laser ray tracing

The design and analysis of high energy density (HED) laser experiments typically rely on radiation hydrodynamics simulations. However, some laser–plasma interaction regimes are not collisional and cannot be adequately modeled with hydrodynamics. For example, strongly driven magnetic reconnection and magnetized collisionless shock experiments possess extended hydrodynamic or even kinetic properties, necessitating first-principles kinetic simulations. In this paper, we present the benchmarking and first results obtained with a laser-ray-tracing and inverse bremsstrahlung absorption module implemented in the particle-in-cell code PSC. The simulation results are compared to radiation hydrodynamic simulations using the FLASH code as well as analytical estimates. We successfully benchmark the energy deposition model and overall hydrodynamic evolution of the systems. We also consider possible kinetic effects that may be expected from laser-target ablation in the HED regime, including non-local transport and two-temperature effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Development of Li–S Battery Cells with High Energy Density and Long Cycling Life

Lithium–sulfur (Li–S) batteries are considered one of the most promising next-generation energy storage technologies for electric vehicles, owing to their high energy density (up to three times greater than current lithium-ion batteries) and the low cost of sulfur (approximately 100 times cheaper than conventional cobalt oxide). However, several challenges hinder their commercial viability, including the electronically and ionically insulating nature of sulfur, polysulfide dissolution, and lithium dendrite growth. These issues significantly limit battery energy density and cycle life and must be addressed to enable successful commercialization. Current strategies involving porous carbon structures, additives, and electrocatalyst engineering have not fully resolved the polysulfide dissolution problem. While polysulfide-free cathode materials offer a promising solution, they often suffer from low sulfur content, leading to reduced discharge capacity and sluggish reaction kinetics. To overcome these limitations, we have developed novel soluble-polysulfide-free sulfur cathode active materials with a high sulfur content (>50 wt%). By integrating these cathodes with functional binders, optimized electrolyte formulations, and refined electrode fabrication techniques, we demonstrate Li–S batteries with both high energy density and long cycle life. This advancement brings the realization of low-cost, high-energy Li–S batteries significantly closer to practical application.

25 ENERGY STORAGE↗
DOE OSTI2026

Upcycling mixed cathode materials to high-energy-density LiFe 0.75 Mn 0.25 PO 4

To address the demand for next-generation cathode materials with high energy density, upcycling LiFePO 4 into LiFe 0.75 Mn 0.25 PO 4 has attracted considerable attention. Nevertheless, existing strategies have yet to achieve both morphology and full elemental recovery under mild ambient conditions. Here, we report an upcycling route that can address this issue by combining leaching and a high-temperature treatment process. The upcycled LiFe 0.75 Mn 0.25 PO 4 exhibits enlarged lattice spacing and a high discharge plateau, and it delivers an energy density of 563.7 Wh/kg, 40.3 Wh/kg higher than recycled LiFePO 4 , which indicates the high value of the proposed upcycling strategy. At 1 C, LiFe 0.75 Mn 0.25 PO 4 also exhibits excellent cycling stability of 91% over 700 cycles. Techno-economic analysis also indicates impressive economic and environmental benefits, including 10.4% less raw materials usage and 12.2% less energy consumption and wastewater generation. This work demonstrates a scalable and economic upcycling strategy and provides a promising pathway for sustainable battery upcycling compatible with industrial conditions.

LMFP↗
DOE OSTI2025

Molecular Interlocking Multidimensional Modulations of Cathode‐Electrolyte Interface for Constructing High Energy Density Quasi‐Solid‐State Batteries

Gel polymers are regarded as a promising candidate electrolyte for lithium-metal quasi-solid-state batteries, primarily due to their high ionic conductivity and solid-liquid synergistic properties. However, challenges such as interfacial side reactions, limitations in Li + transport caused by interfacial issues, and leaching of transition metals from the cathode have yet to be effectively solved. Herein, a novel gel electrolyte modulation strategy based on electrostatic filler assembly is proposed to address the issues of ineffective capacity utilization and inadequate cycling stability of high-energy-density cathode materials in solid-state lithium-ion batteries. It constructs a 3D interpenetrating charge-bridge network that effectively tackles the phase-separation challenge between fillers and electrolytes at the molecular level. Meanwhile, the molecular interlocking structure effectively inhibits the electrolyte erosion. More critically, it optimizes and stabilizes the cathode-electrolyte interface film, which facilitates the conduction of Li + -ions through a size-sieving mechanism. Consequently, this strategy enables effective adaptation across diverse high-energy-density cathode materials with satisfactory capacity performance (170.4 mAh g −1 at 4.5 V/1 C for LiNi 0.6 Co 0.2 Mn 0.2 O 2 and 194.0 mAh g −1 at 4.3 V/1 C for LiNi 0.9 Co 0.08 Mn 0.02 O 2 ). In conclusion, this investigation offers a straightforward and effective reference for addressing the critical challenges of ionic transport and interface stabilization in the design of gel electrolytes.

cathode-electrolyte interface↗
DOE OSTI2025

Measurement of interfacial thermal resistance in high-energy-density matter

Heat transport across interfaces is a ubiquitous phenomenon with many unresolved aspects. In particular, it is unknown if an interfacial thermal resistance (ITR) occurs in matter with high-energy-density where free electrons dominate the heat conduction. Here, we report on the first experimental evidence that a significant heat barrier is present between two different regions of high-energy-density matter: a strongly heated tungsten wire and a surrounding plastic layer that stays relatively cold. We use diffraction-enhanced imaging to track the time evolution of density discontinuities and reconstruct the temperature evolution in the quasi-stationary stage. The clear signatures of a temperature jump demonstrate the importance of the ITR for strongly heated systems with far-reaching implications for interpreting experiments and applications like inertial confinement fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗