Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYDROTHERMAL SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Aspartate transformation at 200 °C with brucite [Mg(OH) 2 ], NH 3 , and H 2 : Implications for prebiotic molecules in hydrothermal systems

Hydrothermal systems may have been favorable environments for the evolution of prebiotic chemistry on early Earth due to the presence of chemical, temperature, and redox gradients that could promote the formation of biomolecules. However, the relevance of these environments in origins of life scenarios has been debated due to rapid decomposition of biologically essential species, such as amino acids, at high temperatures. Little is known about the reactivity of amino acids in the presence of mineral surfaces and reducing conditions, which reflect the geochemical complexities of environments such as serpentinite-hosted hydrothermal vents. We investigated the decomposition of 25 mM aspartate at 200 °C and 15.5 bars (P SAT ) in gold capsules both with and without brucite [Mg(OH) 2 ], a mineral product of serpentinization, and reducing conditions (NH 4 Cl and H 2(aq) ). Here we observed that the reaction products of aspartate vary significantly with the initial reaction conditions. Fluids containing aspartate only decomposed to fumarate, maleate, malate, acetate, and trace amounts of succinate and glycine. However, under reducing conditions, the main product was succinate (8 mM) and also approximately 1 mM total of the amino acids glycine, α-alanine, and β-alanine. The amount of α-alanine increased three-fold with brucite. Furthermore, we detected a two-fold decrease in the fumarate concentration, whereas total maleate concentration dramatically decreased over ten-fold and resulted in an overall increase in the trans/cis ratio of these deamination products of aspartate from 0.9 to 4.5 as a function of brucite loading. This net decrease in fumarate and maleate concentration and the five-fold increase in the trans/cis ratio might have been caused by a combination of a pH increase and the formation of magnesite due to increased Mg 2 + ion concentration. The results of this study provide evidence that the fundamental properties of a hydrothermal system, including mineral assemblages, reducing conditions, and dissolved species concentrations, will influence the fate of amino acids at high temperature.

58 GEOSCIENCES↗

Mechanisms of iron oxide transformation in hydrothermal systems.

Coexistence of magnetite and hematite in hydrothermal systems has often been used to constrain the redox potential of fluids, assuming that the redox equilibrium is attained among all minerals and aqueous species. However, as temperature decreases, disequilibrium mineral assemblages may occur due to the slow kinetics of reaction involving the minerals and fluids. In this study, we conducted a series of experiments in which hematite or magnetite was reacted with an acidic solution under H{sub 2}-rich hydrothermal conditions (T = 100-250 C, P{sub H{sub 2}} = 0.05-5 MPa) to investigate the kinetics of redox and non-redox transformations between hematite and magnetite, and the mechanisms of iron oxide transformation under hydrothermal conditions. The formation of euhedral crystals of hematite in 150 and 200 C experiments, in which magnetite was used as the starting material, indicates that non-redox transformation of magnetite to hematite occurred within 24 h. The chemical composition of the experimental solutions was controlled by the non-redox transformation between magnetite and hematite throughout the experiments. While solution compositions were controlled by the non-redox transformation in the first 3 days in a 250 C experiment, reductive dissolution of magnetite became important after 5 days and affected the solution chemistry. At 100 C, the presence of maghemite was indicated in the first 7 days. Based on these results, equilibrium constants of non-redox transformation between magnetite and hematite and those of non-redox transformation between magnetite and maghemite were calculated. Our results suggest that the redox transformation of hematite to magnetite occurs in the following steps: (1) reductive dissolution of hematite to Fe{sub (aq)}{sup 2+} and (2) non-redox transformation of hematite and Fe{sub (aq)}{sup 2+} to magnetite.

15 GEOTHERMAL ENERGY↗

Aqueous geochemistry of the Thermopolis hydrothermal system, southern Bighorn Basin, Wyoming, U.S.A.

The Thermopolis hydrothermal system is located in the southern portion of the Bighorn Basin, in and around the town of Thermopolis, Wyoming. It is the largest hydrothermal system in Wyoming outside of Yellowstone National Park. The system includes hot springs, travertine deposits, and thermal wells; published models for the hydrothermal system propose the Owl Creek Mountains as the recharge zone, simple conductive heating at depth, and resurfacing of thermal waters up the Thermopolis Anticline.

58 GEOSCIENCES↗

The influence of permeability anisotropy in the upper ocean crust on advective heat transport by a ridge-flank hydrothermal system

Here, in this study, we highlight the importance of permeability anisotropy on the hydrogeological regime of a ridge-flank hydrothermal system. Our study site, North Pond, is a marine sediment pond on ~8 Ma seafloor in the North Atlantic, and represents a low-temperature, end-member ridge-flank hydrothermal system. Previous simulations of North Pond elucidated long-standing hypotheses concerning hydrothermal fluid and heat transport in the upper volcanic crust but failed to fully explain observed patterns of seafloor heat flux in this area. Here we use variography, a geostatistical method, to quantify relations between seafloor heat-flux measurements, and coupled numerical simulations of fluid and heat flow to simulate the hydrogeologic regime. Directional variography shows that heat-flux observations are correlated along-strike of the regional crustal fabric. Three-dimensional simulations that include permeability anisotropy are able to replicate seafloor heat-flux patterns across North Pond. The simulations that result in the best match to thermal data incorporate permeability anisotropy in the horizontal plane. We find that the feedback between permeability anisotropy and the asymmetric geometry of North Pond combine to promote advective removal of heat and mass within the crustal aquifer. These findings suggest that permeability anisotropy in the oceanic crust may influence ridge-flank hydrothermal circulation more broadly.

58 GEOSCIENCES↗

Three-Dimensional Electrical Resistivity Tomography of the Solfatara Crater (Italy): Implication for the Multiphase Flow Structure of the Shallow Hydrothermal System: Resistivity Model of Solfatara Crater

The Solfatara volcano is the main degassing area of the Campi Flegrei caldera, characterized by 30 of unrest. Assessing and understanding such renewal activity is a challenging task because hydrothermal interactions with magmatic gases remain poorly understood. In this study, we decipher the complex structure of the shallow Solfatara hydrothermal system by performing the first 3-D, high-resolution, Electrical Resistivity Tomography (ERT) of the volcano. The 3-D resistivity model was obtained from the inversion of 43,432 resistance measurements performed on an area of 0.68 km 2 . The proposed interpretation of the multiphase hydrothermal structures is based on the resistivity model, a high-resolution infrared surface temperature image, and 1,136 soil CO 2 flux measurements. In addition, we realized 27 soil Cation Exchange Capacity (CEC) and pH measurements demonstrating a negligible contribution of surface conductivity to the shallow bulk electrical conductivity. Hence, we demonstrate that the resistivity changes are mainly controlled by fluid content and temperature. The high-resolution tomograms identify for the first time the structure of the gas-dominated reservoir at 50 m depth that feeds the Bocca Grande fumarole through a ~10-m-thick channel. In addition, the resistivity model reveals a channel-like conductive structure where the liquid produced by steam condensation around the main fumaroles flows down to the Fangaia area within a buried fault. The model delineates the emplacement of the main geological structures: Mt Olibano, Solfatara crypto-dome, and tephra deposits. It also reveals the anatomy of the hydrothermal system, especially two liquid-dominated plumes, the Fangaia mud pool and the Pisciarelli fumarole, respectively.

58 GEOSCIENCES↗

Molybdenum in basalt-hosted seafloor hydrothermal systems: Experimental, theoretical, and field sampling approaches

Here, seafloor hydrothermal vents represent potential sources of Mo and other biologically relevant transition metals to the global ocean, complementing continental runoff. Here, we use a combination of experimental, theoretical, and field-sampling approaches to investigate the behavior of Mo in basalt-hosted seafloor hydrothermal systems to provide insight into the processes controlling Mo concentrations in hydrothermal fluids and to derive estimates of vent fluid Mo concentrations and fluxes. Results of this study demonstrate that reaction fluids generated from 350°C, 500 bar hydrothermal basalt alteration experiments contain 775–801 nmol/kg Mo and are thus comparable to a recently collected time series of natural seafloor vent fluids that contained 200–220 nmol/kg Mo at 302°C and 29–30 nmol/kg at 281–282°C (Evans et al., 2023). Synchrotron-based analyses of experimentally altered basalt produced in this study and additional natural samples of altered oceanic crust originally collected from Pito Deep Rift reveal the presence of Mo-rich particles consistent with trace molybdenite. Comparisons of Mo:Cu ratios in natural vent fluids and near-vent sediment trap samples from Main Endeavour Field indicate that vent fluid Mo is readily incorporated into buoyant plume particles and advected out of the near-vent field, analogous to previous mass balance studies of Cu in this region. Thermodynamic calculations of molybdenite solubility in the context of mineral-buffered hydrothermal fluids and comparisons with natural and experimental hydrothermal fluids suggest that high-temperature vent fluids contain 30–1500 nmol/kg Mo. While a minor component of the modern Mo budget, hydrothermal Mo fluxes are estimated to have constituted 0.3–200× the contemporaneous continental weathering fluxes prior to the ~2.4 Ga ago “Great Oxidation Event” and widespread oxidative continental weathering. Overall, identification of hydrothermal vents as a source of Mo-rich plume particles with potential for dispersal into the wider marine environment has significant implications for hypotheses regarding the co-evolution of Life and Earth’s environments, specifically the form and availability of Mo in anoxic Archean-Eon oceans, where Mo-dependent enzymatic pathways are thought to have emerged and subsequently evolved.

58 GEOSCIENCES↗

Episodic Earthquake Swarms in the Mineral Mountains, Utah Driven by the Roosevelt Hydrothermal System

Over 1,000 earthquakes (-2.0 < M < 2.0), identified using a matched-filter method, occurred in the Mineral Mountains, Utah between 2016 and 2019. The enhanced catalog is complete down to M -0.9 and contains roughly 15 times more events than originally cataloged. Earthquake relocation of ~800 earthquakes shows that activity is concentrated in a <2 km long E-W striking narrow zone, ~4 km east of the Roosevelt hydrothermal system. Two fault orientations, both N-S and E-W parallel to the Opal Mound and Mag Lee faults, respectively, are observed after computing composite focal mechanisms of highly similar earthquakes. Looking solely at the temporal distribution of the seismicity, we identify 15 periods of swarm-like activity, with two major clusters occurring in December 2016, recorded by three stations, and in October 2019 recorded by eight stations. The October 2019 swarm, the best recorded sequence in the area, provides evidence for the underlying triggering mechanism. We show that a complex mechanism of fluid diffusion and aseismic slip is responsible for the swarm evolution with migration velocities reaching 10 km/day. We hypothesize that these episodic swarms in the Mineral Mountains are primarily driven by migrating fluids that originate within the Roosevelt hydrothermal system.

58 GEOSCIENCES↗

Fractionation of REE, U, and Th in natural ore-forming hydrothermal systems: Thermodynamic modeling

This contribution presents a thermodynamic model revealing the mechanisms responsible for separation of Heavy and Light Rare Earth (HREE and LREE) phosphates in natural hydrothermal systems at temperatures of 250–350 °C. Our calculations were performed for an isothermal column of rock containing 0.5 wt% of apatite (Ca phosphate), which served as an immobilizing agent for REE dissolved in the solution. REE were transported by 10 wt% NaCl acidic solution. The model accounted for formation of REE phosphate solid solutions through a regular mixing model. It demonstrates that hydrothermal flushing can efficiently separate REE forming xenotime (HREE phosphate solid solutions) at the beginning of the column, and re-transportation of monazite (LREE rich) to the end of the column. This separation is primarily due to the fact that at elevated temperatures stability LREE chloride complexes is significantly higher than that for HREE. The model also evaluates behavior of U and Th, which accompany REE in vast majority of natural locations. It was found that U strongly fractionates to xenotime, whereas Th fractionates to monazite. Finally, this phenomenon can be explained by the differences in crystal-chemical characteristics between monazite and xenotime, and the mobility of Th in aqueous solutions at elevated temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Small-Magnitude Seismic Swarms in Central Utah (US): Interactions of Regional Tectonics, Local Structures and Hydrothermal Systems

Swarms in Central Utah are situated in the complex transition between the Basin and Range (BR) province and the Colorado Plateau. Transecting transverse structures, volcanic deposits, and hydrothermal systems complicate the extensional BR horst and graben structures and provide a multitude of plausible triggering mechanisms. Revisiting the catalog of the University of Utah Seismograph Stations (1981–2022), we analyze spatio-temporal patterns and characteristic features of seismic sequences. Swarms with alternating seismicity rates, bursts, and longer swarms with persistent moment release exhibit a remarkable diversity in temporal evolution. Swarm durations do not scale with cumulative seismic moment: swarms lasting less than 1 day can have similar cumulative seismic moments as month-long swarms. Here, we observe stationary swarms re-occurring for years (e.g., Mineral Mountains), as well as singular swarms in low-seismicity areas (e.g., activating a local structure). The swarms show a pronounced heterogeneity in triggering and driving mechanisms, observed in the detailed analysis of exemplary sequences (detections, relocations, moment tensors, waveform-based clustering, and repeater analysis). The 2022 Sevier Valley sequence activated a BR-related normal fault, the first resolved fault plane in the valley since 1983. The 2011 Circleville sequence is interpreted as a swarm triggered by mainshock-aftershock activity characterized by increasing magnitudes, changing rupture mechanisms, and a concentration of highly similar events in the second part of the sequence. By jointly discussing exemplary sequences and catalog statistics, we draw a comprehensive picture of swarm activity and its relation to geothermal and tectonic activity.

58 GEOSCIENCES↗

Thermo-Hydro-Chemical Simulation of Mid-Ocean Ridge Hydrothermal Systems: Static 2D Models and Effects of Paleo-Seawater Chemistry

Decades of research have resulted in characterization of the ocean floor manifestations of mid-ocean ridge (MOR) hydrothermal systems, yet numerical models accounting for the connections between heat transfer, hydrology and geochemistry have been slow to develop. The Thermo-hydro-chemical code ToughReact can be used to describe the coupled effects of fluid flow, heat transfer, and fluid-rock chemical interactions that occur in MOR systems. We describe the results of 2-dimensional simulations of steady state flow in fractured diabase with mineral-fluid chemical reactions. Basal heating and specified permeability yield maximum temperature of 400°C. Total fluid flux and high fracture flow velocities are in accord with observations. Fluid chemistry, mineralogical changes and 87 Sr/ 86 Sr ratios can be compared to observations to assess and calibrate models. Simulated high temperature fracture fluids have Mg and SO 4 near zero, elevated Ca and 87 Sr/ 86 Sr of about 0.7040. Total alteration is 10%–50% for simple models of spreading. Anhydrite forms mainly near the base of the upwelling zone and results in substantial local fracture porosity reduction. A calibrated model is used to predict how Sr isotopes and other features of altered oceanic crust would be different in the Cretaceous (95 Ma) early Proterozoic (1,800 Ma) and Archean (3,800 Ma), when seawater may have had high Ca and Sr concentrations, lower pH, higher temperature, and lower Na, Mg, and SO 4 . The simulations are offered as a start on what ultimately may require a longer-term community effort to better understand the role of MOR thermo-hydro-chemical systems in Earth evolution.

58 GEOSCIENCES↗

Mobility of heavy rare earth elements in magmatic-hydrothermal systems: Experimental determination of DyPO 4 solubility in supercritical fluids

Dysprosium (Dy) is part of the heavy rare earth elements (REE) and a critical component in the production of high-performance super magnets used in wind turbines, electric vehicles, and other green technologies. The HREE phosphate, xenotime, is commonly associated with hydrothermal systems, where the mobility, fractionation, and deposition of REE are controlled by the stability of aqueous complexes and solubility of REE minerals which depend on temperature, pressure, and fluid composition (salinity, pH, and ligand availability). Here, we conducted a series of synthetic DyPO 4 solubility experiments in NaCl-HCl-bearing aqueous solutions (pH of 2 at 25 °C) from 500 to 700 °C and 1.5 kbar using externally heated pressure vessels. DyPO 4 displays a strong prograde solubility with temperature across all studied fluid salinities (0–0.5 m NaCl). The DyPO₄ solubility isotherms at 500 °C, 600 °C, and 700 °C show a complex relationship with salinity where DyPO₄ solubility is highest (39.2–1552 ppm at 500–700 °C) in 0 m NaCl solutions, decreases strongly (21–331 ppm at 500–700 °C) in the 0.06 m NaCl solutions and remains relatively constant in the 0.25 m (42.8–248 ppm) and 0.5 m NaCl (40.2–124 ppm) solutions. Thermodynamic modeling suggests that pH increases as a function of temperature and salinity, and controls solubility due to the stability of chloride complexes (i.e., DyCl +2 and DyCl 2 + ) at 500–600 °C, transitioning to hydroxyl complexes (i.e., Dy(OH) 3 0 ) dominating at 700 °C and relatively alkaline pH. Comparison with NdPO 4 solubility data indicates that the light REE in monazite is significantly more soluble than the heavy REE in xenotime in saline fluids at high temperature (500–700 °C), implying efficient light/heavy REE fractionation in supercritical fluids. The lower solubility of DyPO 4 relative to NdPO 4 suggests that at high temperatures, acidic (pH 2–4), low-salinity (∼5 wt% NaCl) fluids will favor the precipitation of xenotime over monazite as it will cool from 700 °C to below 500 °C. These observations align with paragenetic mineral assemblages in NYF pegmatites (e.g., Baveno, Italy), where xenotime commonly immobilizes heavy REE during the high-temperature hydrothermal stages.

58 GEOSCIENCES↗

Potential economic values of minerals in brines of identified hydrothermal systems in the US

Geothermal resources have been used as a clean and sustainable baseload power for a long time. However, the upfront deployment costs of geothermal technologies are high. Various approaches are considered to make geothermal energy more economically attractive for developers. One potential approach is to have an additional revenue stream through recovery minerals from the large volume of brine that is used to generate power at geothermal sites. Geothermal brines interact with rocks for a long time at high temperature and pick up minute levels of various minerals, such as SiO2, Li, Mn, Cs, etc. In this paper, we assess the mineral contents in brines of several identified hydrothermal resource areas in the US. The compositions of geothermal brines were assembled from various sources whereas the brine mass flow rates of the potential power plants in those hydrothermal areas were obtained from GETEM simulations. Our study shows that several value-adding minerals could be available for recovery from the geothermal brines in the US. Specially, potential revenues from recovery of Au, Cs, Rb, Li, and SiO2 look very promising for several hydrothermal systems. However, several outstanding technological, financial, and market challenges as well as site-specific challenges (e.g., chemistry, sustainability, etc.) need to be evaluated for economic recovery of targeted minerals.

15 GEOTHERMAL ENERGY↗

Composition of Magma and Characteristics of the Hydrothermal System of Newberry Volcano, Oregon, From Magnetotellurics

Abstract We use 3‐D magnetotellurics to improve our understanding of the structure and magma composition of Newberry Volcano in Oregon, USA. Newberry is a broad shield volcano with a summit caldera and strongly bimodal magmatism. Newberry has long been the subject of geothermal exploration research, but that work has focused on the volcano's west flank, leaving the caldera largely unstudied with geophysical methods until recently. Our modeling shows a relatively resistive magma reservoir of approximately 50 Ωm. Our work builds upon recent seismic models and petrological analysis to interpret Newberry's magma reservoir as a dry rhyolite with 8–11% partial melt, which matches the seismically determined melt fraction. Finding the conditions within the magma reservoir that allow the resistivity and seismic analysis to come to the same melt fraction helps us narrow down the magma temperature and composition. From this we infer a dry rhyolitic magma at 850 °C. We also image a prominent vertical conductive anomaly along the south rim below the vent that produced the most recent eruption. The anomaly extends from magma reservoir depths of 3 km to 1 km below the surface where it disperses into the caldera fill. We interpret this as the main conduit for magmatic fluids to reach Newberry's hydrothermal system. Other features that our model shows include higher conductivity along the caldera rim and a resistive older pluton on the west flank.

Bowles‐Martinez, E.↗

Fluid rare earth element anlayses from geothermal wells located on the Reykjanes Peninsula, Iceland and Middle Valley seafloor hydrothermal system on the Juan de Fuca Ridge.

Results for fluid rare earth element analyses from four Reykjanes peninsula high-temperature geothermal fields. Data for fluids from hydrothermal vents located 2400 m below sea level from Middle Valley on the Juan de Fuca Ridge are also included. Data have been corrected for flashing. Samples preconcentrated using a chelating resin with IDA functional group (InertSep ME-1). Analyzed using an Element magnetic sector inductively coupled plasma mass spectrometry (ICP-MS).

15 GEOTHERMAL ENERGY↗

The Influence of Episodic Shallow Magma Degassing on Heat and Chemical Transport in Volcanic Hydrothermal Systems

Springs at La Soufrière of Guadeloupe have been monitored for nearly four decades since the phreatic eruption and associated seismic activity in 1976. We conceptualize degassing vapor/gas mixtures as square-wave sources of chloride and heat and apply a new semianalytic solution to demonstrate that chloride and heat pulses with the same timing and duration result in good matches between measured and simulated spring temperatures and concentrations. While the concentration of chloride pulses is variable, the local boiling temperature of 96°C was assigned to all thermal pulses. Because chloride is a conservative tracer, chloride breakthrough is only affected by one-dimensional advection and dispersion. The thermal tracer is damped and lagged relative to chloride due to conductive heat exchange with the overlying and underlying strata. Joint analysis of temperature and chloride allows estimation of the onset and duration of degassing pulses, refining the chronology of recent magmatic intrusion.

58 GEOSCIENCES↗