SEARCH · Engineering Papers
Results for “HYDROGEN COMPOUNDS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
New CeMgCo{sub 4} and Ce{sub 2}MgCo{sub 9} compounds: Hydrogenation properties and crystal structure of hydrides
Two new ternary intermetallic compounds, CeMgCo{sub 4} (C15b pseudo-Laves phase, MgCu{sub 4}Sn type) and Ce{sub 2}MgCo{sub 9} (substitution derivative of PuNi{sub 3} type) were synthesized by mechanical alloying method. The structural and hydrogenation properties of these compounds were studied by X-ray diffraction and Pressure-Composition-Temperature measurements. Both compounds absorb hydrogen at room temperature and pressures below 10 MPa forming hydrides with maximum compositions CeMgCo{sub 4}H{sub 6} and Ce{sub 2}MgCo{sub 9}H{sub 12}. Single plateau behavior was observed in P-C isotherm during hydrogen absorption/desorption by Ce{sub 2}MgCo{sub 9} alloy. The CeMgCo{sub 4}-H{sub 2} system is characterized by the presence of two absorption/desorption plateaus corresponding to formation of {beta}-CeMgCo{sub 4}H{sub 4} and {gamma}-CeMgCo{sub 4}H{sub 6} hydride phases. The structure of {beta}-hydride CeMgCo{sub 4}H(D){sub 4} was determined from X-ray and neutron powder diffraction data. In this structure initial cubic symmetry of CeMgCo{sub 4} is preserved and hydrogen atoms fill only one type of interstitial sites, triangular MgCo{sub 2} faces. These positions are occupied by 70% and form octahedron around Mg atom with Mg-D bond distances 1.84 A. - Graphical abstract: Crystal structure of the {beta}-CeMgCo{sub 4}D{sub 4.2} deuteride. Octahedra of D-sites around Mg atoms are shown. Highlights: Black-Right-Pointing-Pointer Two new ternary compounds have been synthesized in the Ce-Mg-Co system. Black-Right-Pointing-Pointer Below 100 bar H{sub 2} CeMgCo{sub 4} and Ce{sub 2}MgCo{sub 9} reversibly absorb hydrogen at room temperature. Black-Right-Pointing-Pointer Crystal structure of cubic CeMgCo{sub 4}D{sub 4.2} deuteride has been determined.
Volcanic Degassing of Hydrogen Compounds on Io
Thermodynamic calculations show that hydrogen, recently detected in Io's ionosphere by the Galileo spacecraft, can degas from high-temperature silicate magmas on Io in the form of H2O, H2S, HS, NaOH, H2, KOH, and HCl in order of decreasing abundance.
Negative-muon depolarization in low-Z elements and hydrogen compounds.
Negative muon depolarization in muonic atoms in C, Mg, water, toluene, paraffin and polyethylene determined from precession measurement of muon electron decay asymmetry
Boron–nitrogen–hydrogen (BNH) compounds: recent developments in hydrogen storage, applications in hydrogenation and catalysis, and new syntheses
The strong efforts devoted to the exploration of BNH compounds for hydrogen storage have led to impressive advances in the field of boron chemistry. This review summarizes progress in this field from three aspects. It starts with the most recent developments in using BNH compounds for hydrogen storage, covering NH 3 BH 3 , B 3 H 8 - containing compounds, and CBN compounds. The following section then highlights interesting applications of BNH compounds in hydrogenation and catalysis. The last part is focused on breakthroughs in the syntheses and discovery of new BNH organic analogues. Finally, the role of N–H δ+ ∙∙∙H δ- –B dihydrogen interactions in molecule packing, thermal hydrogen evolution, and syntheses is also discussed within the review.
Theoretical model of vertical distributions of CO and CH4 in the mesosphere and upper stratosphere.
Carbon compounds (CO and CO2) and methane are added to an existing computer program (Shimazaki and Laird, 1970, 1972), which calculates diurnal variations in density distributions of pure oxygen compounds, hydrogen compounds, and nitrogen compounds. For the present model calculations, the original program was modified to calculate the steady-state profiles for all constituents, and then these solutions were used as the initial condition for solving the time-dependent equations. The effects of chemical reactions and vertical eddy diffusion transport on the CH4 and CO concentrations above 40 km, where one-dimensional treatment may not be too inappropriate, are discussed. Some of the 15 constituents included in the computer program interact with CO and CH4 chemically, and CH4 is more sensitive to the eddy diffusion coefficient than any other constituent. Therefore it is easier to determine the most appropriate profile of the eddy diffusion coefficient by comparing the model profile with the observations for CH4.
Network stability of FKM rubber compounds under hydrogen pressure
Fluorocarbon-based rubber (FKM) compounds are typically utilized in the aeronautical industry due to its exceptional chemical and thermal resistance and recently has drawn significant interest from the hydrogen community for various hydrogen applications, but there exists little data evaluating its hydrogen compatibility. In this paper, a formulated FKM compound was exposed to ultrahigh hydrogen pressure (90 MPa) and analyzed by attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy and crosslinking densities by solvent swelling measurement. ATR-FTIR spectroscopic data demonstrated that high-pressure hydrogen not only caused cleavages in polymer backbone and cross linkages, but also induced additional degradation of FKM compounds by breaking intermolecular hydrogen bonding between carboxylic acids, which were produced during rubber molding and post curing processes. This hydrogen pressure-driven degradation was significantly higher towards the core of the material than at the surface due to its weaker bonding between polymers and fillers.
Synthesis and stability of hydrogen selenide compounds at high pressure
The observation of high-temperature superconductivity in hydride sulfide (H 2 S) at high pressures has generated considerable interest in compressed hydrogen-rich compounds. High-pressure hydrogen selenide (H 2 Se) has also been predicted to be superconducting at high temperatures; however, its behaviour and stability upon compression remains unknown. In this study, we synthesize H 2 Se in situ from elemental Se and molecular H 2 at pressures of 0.4 GPa and temperatures of 473 K. On compression at 300 K, we observe the high-pressure solid phase sequence (I-I'-IV) of H 2 Se through Raman spectroscopy and x-ray diffraction measurements, before dissociation into its constituent elements. Through the compression of H 2 Se in H 2 media, we also observe the formation of a host-guest structure, (H 2 Se) 2 H 2 , which is stable at the same conditions as H 2 Se, with respect to decomposition. These measurements show that the behaviour of H 2 Se is remarkably similar to that of H 2 S and provides further understanding of the hydrogen chalcogenides under pressure.
A spark emission method for hydrogen containing compounds adsorbed on aluminum surfaces
Weld quality relationship to aluminum surface contamination by hydrogen-containing compounds
Magnetic and Superconducting Materials at High Pressures
The work concentrates on few important tasks in enabling techniques for search of superconducting compressed hydrogen compounds and pure hydrogen, investigation of mechanisms of high-Tc superconductivity, and exploring new superconducting materials. Along that route we performed several challenging tasks, including discovery of new forms of polyhydrides of alkali metal Na at very high pressures. These experiments help us to establish the experimental environment that will provide important information on the high-pressure properties of hydrogen-rich compounds. Our recent progress in RIXS measurements opens a whole field of strongly correlated 3d materials. We have developed a systematic approach to measure major electronic parameters, like Hubbard energy U, and charge transfer energy Δ, as function of pressure. This technique will enable also RIXS studies of magnetic excitations in iridates and other 5d materials at the L edge, which attract a lot of interest recently. We have developed new magnetic sensing technique based on optically detected magnetic resonance from NV centers in diamond. The technique can be applied to study superconductivity in high-TC materials, to search for magnetic transitions in strongly correlated and itinerant magnetic materials under pressure. Summary of Project Activities; development of high-pressure experimentation platform for exploration of new potential superconductors, metal polyhydrides (including newly discovered alkali metal polyhydrides), and already known superconductors at the limit of static high-pressure techniques; investigation of special classes of superconducting compounds (high-Tc superconductors, new superconducting materials), that may provide new fundamental knowledge and may prove important for application as high-temperature/high-critical parameter superconductors; investigation of the pressure dependence of superconductivity and magnetic/phase transformations in 3d transition metal compounds, including transitions from magnetic to nonmagnetic phases in a broad pressure-temperature range; using X-ray methods including the newly developed RIXS high-pressure technique to explore pressure-tuned electronic excitations in strongly correlated 3d-materials; and advancing transport and magnetic techniques for measurements on small samples at very high pressures in a wide temperature range, with the application of focused ion beam technology and photolithography tailored to the design of microcircuits down to a nanoscale size, thus expanding the horizon in the search for novel physical phenomena at ultrahigh pressures. Apply new optical magnetic sensing techniques with NV- centers in diamond to detect superconductivity and magnetic transitions with unprecedented spatial resolution.
Predicted bulk photovoltaic effect in hydrogenated Zintl compounds
The bulk photovoltaic effect (BPVE) is a phenomenon that creates a net electrical current from sunlight in a polar noncentrosymmetric material possessing a moderate band gap. This effect is being explored as an alternative to traditional p–n junction solar cells to convert solar energy into electricity. This paper assesses the possibility that hydrogenated Zintl-phase compounds, consisting only of metal, metalloid, and hydrogen atoms, may be able to provide a BPVE response. Towards this end, the magnitude of the BPVE shift current is calculated for each of the compounds AeTrTtH (Ae = Ca, Sr, and Ba; Tr = Al and Ga; and Tt = Si, Ge, and Sn). For this family of hydogenated Zintl compounds, maximum shift current responses are predicted to be up to eight times greater than that calculated for BiFeO3, and have a significant response down to much lower photon energies than BiFeO3 as well. With band gaps below 1 eV, and with some members of this family of compounds exhibiting stability in air up to 770 K, some of these compounds may find use in photovoltaic devices.
Biotransformation of furanic and phenolic compounds with hydrogen gas production in a microbial electrolysis cell
In this study, furanic and phenolic compounds are problematic byproducts resulting from the decomposition of lignocellulosic biomass during biofuel production. This study assessed the capacity of a microbial electrolysis cell (MEC) to produce hydrogen gas (H 2 ) using a mixture of two furanic (furfural, FF; 5-hydroxymethyl furfural, HMF) and three phenolic (syringic acid, SA; vanillic acid, VA; and 4-hydroxybenzoic acid, HBA) compounds as the sole carbon and energy source in the bioanode. The rate and extent of biotransformation of the five compounds, efficiency of H 2 production, as well as the anode microbial community structure were investigated. The five compounds were completely transformed within 7-day batch runs and their biotransformation rate increased with increasing initial concentration. At an initial concentration of 1,200 mg/L (8.7 mM) of the mixture of the five compounds, their biotransformation rate ranged from 0.85 to 2.34 mM/d. The anode coulombic efficiency was 44-69%, which is comparable to wastewater-fed MECs. The H 2 yield varied from 0.26 to 0.42 g H 2 -COD/g COD removed in the anode, and the bioanode volume-normalized H 2 production rate was 0.07-0.1 L/L-d. The major identified fermentation products that did not transform further were catechol and phenol. Acetate was the direct substrate for exoelectrogenesis. Current and H 2 production were inhibited at an initial substrate concentration of 1,200 mg/L, resulting in acetate accumulation at a much higher level than that measured in other batch runs conducted with a lower initial concentration of the five compounds. The anode microbial community consisted of exoelectrogens, putative degraders of the five compounds, and syntrophic partners of exoelectrogens. The H 2 production route demonstrated in this study has proven to be an alternative to the currently used process of reforming natural gas to supply H 2 needed to upgrade bio-oils to stable hydrocarbon fuels.
Compound Specific Hydrogen Isotope Composition of Type II and III Kerogen Extracted by Pyrolysis-GC-MS-IRMS
The use of Hydrogen (H) isotopes in understanding oil and gas resource plays is in its infancy. Described here is a technique for H isotope analysis of organic compounds pyrolyzed from oil and gas shale-derived kerogen. Application of this technique will progress our understanding. This work complements that of Pernia et al. (2013, this meeting) by providing a novel method for the H isotope analysis of specific compounds in the characterization of kerogen extracted by analytically diverse techniques. Hydrogen isotope analyses were carried out entirely "on-line" utilizing a CDS 5000 Pyroprobe connected to a Thermo Trace GC Ultra interfaced with a Thermo MAT 253 IRMS. Also, a split of GC-separated products was sent to a DSQ II quadrupole MS to make semi-quantitative compositional measurements of the extracted compounds. Kerogen samples from five different basins (type II and III) were dehydrated (heated to 80 C overnight in vacuum) and analyzed for their H isotope compositions by Pyrolysis-GC-MS-TC-IRMS. This technique takes pyrolysis products separated via GC and reacts them in a high temperature conversion furnace (1450 C) which quantitatively forms H2, following a modified method of Burgoyne and Hayes, (1998, Anal. Chem., 70, 5136-5141). Samples ranging from approximately 0.5 to 1.0mg in size, were pyrolyzed at 800 C for 30s. Compounds were separated on a Poraplot Q GC column. Hydrogen isotope data from all kerogen samples typically show enrichment in D from low to high molecular weight compounds. Water (H2O) average deltaD = -215.2 (V-SMOW), ranging from -271.8 for the Marcellus Shale to -51.9 for the Polish Shale. Higher molecular weight compounds like toluene (C7H8) have an average deltaD of -89.7 0/00, ranging from -156.0 for the Barnett Shale to -50.0 for the Monterey Shale. We interpret these data as representative of potential H isotope exchange between hydrocarbons and sediment pore water during formation within each basin. Since hydrocarbon H isotopes readily exchange with water, these data may provide some useful information on gas-water or oil-water interaction in resource plays, and further as a possible indicator of paleo-environmental conditions. Alternatively, our data may be an indication of H isotope exchange with water and/or acid during the kerogen isolation process. Either of these interpretations will prove useful when deciphering H isotope data derived from kerogen analysis. More experiments are planned to discern these two or other possible scenarios.
Electrocatalytic Hydrogenation of Oxygenated Compounds in Aqueous Phase
Electrocatalytic hydrogenation is a fascinating strategy to hydrogenate biogenic compounds at ambient conditions by replacing the thermal and H2 inputs by cathodic potential. This work compares the performance of this approach (in aqueous phase at room temperature) for a variety of model oxygenated compounds reacted over a series of metals. The target functionalities were carbonyl groups, aromatic rings, and ether bonds. All metals explored (Pt, Rh, Pd, Cu) are active for the reduction of carbonyl compounds to alcohols. For instance, conversion rates of benzaldehyde increased as a function of metal as: Pt < Rh < Pd (Cu was tested at different conditions). In contrast, only Rh and Pt were found active for hydrogenation of aromatic rings (Rh was more active than Pt). Comparing among the target functionalities, carbonyl groups are more reactive than aromatic rings and ether bonds in phenolic compounds and di-aryl ethers on all explore metals. This carbonyl reactivity, however, is enabled by the aromaticity of the molecule. Hence, the reactivity trend of the examined molecules is: butyraldehyde < furfural < acetophenone < benzaldehyde. For phenolic compounds, phenol is more reactive than cresol and methoxy phenol. Thus, the presence of substituting groups at the functionality being converted (either carbonyl or aromatic ring) decreases conversion rates. Ether bonds are cleaved under electrocatalytic conditions, which opens two main pathways for the conversion of aryl ethers: hydrogenation of the aromatic ring and hydrogenolysis of the ether bonds, whereas hydrolysis occurs as a minor pathway. Electrocatalytic hydrogenation competes with the H2 evolution reaction at the conditions of the tests, therefore Faradaic efficiency (fraction of current utilized in hydrogenation) and hydrogenation rates are correlated. That is, within the potential range explored, increasing hydrogenation rates lead to higher Faradaic efficiencies. The slope of this correlation, however, depends on the potential and on the functionality being hydrogenated. Keywords: Hydrogenation, electrocatalysis, metal catalysis, aqueous phase hydrogenation, biomass conversion. Acknowledgements The authors would like to thank Yang Song, Prof. Johannes Lercher, and the group of Prof. Hubert A. Gasteiger at the Technische Universität München for advice and support. The authors are grateful to Donald M. Camaioni, Nirala Singh, and Juan Herranz for fruitful discussions. The research described in this paper is part of the Chemical Transformation Initiative at Pacific Northwest National Laboratory (PNNL), conducted under the Laboratory Directed Research and Development Program at PNNL, a multi-program national laboratory operated by Battelle for the U.S. Department of Energy.
Ammonia as a case study for the spontaneous ionization of a simple hydrogen-bonded compound
Abstract not provided