Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HTSC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Proposal of a Bulk HTSC Staggered Array Undulator

We proposed a new type of undulator based on bulk high-T{sub c} superconductors (HTSC) which consists of a single solenoid and a stacked array of bulk HTSC. The main advantage of this configuration is that a mechanical structure is not required to produce and control the undulator field. In order to perform a proof of principle experiment, we have developed a prototype of bulk HTSC staggered array undulator using 11 pairs of DyBaCuO bulk superconductors and a normal conducting solenoid. Experimental results obtained by using the prototype undulator and numerical results obtained by a loop current model based on the Bean mode for a type-II superconductor were compared.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An instrument for spatial conductivity measurements of high Tc superconducting (HTSC) materials

High T(sub c) Superconducting (HTSC) thin films are suggested for use in a number of aerospace applications such as an IR bolometer and as electromagnetic shielding. As part of its flight assurance role, the Materials Branch of the Goddard Space Flight Center has initiated development of an instrument capable of measuring variations in conductivity for flat samples using an eddy current testing device and an X-Y positioning table. This instrument was used to examine bulk HTSC samples. System changes that would enable characterization of thin film materials are discussed.

Vansant, T.↗

Vacuum Studies of a Prototype Composite Coil Dewar for HTSC Transformers

Oak Ridge National Laboratory (ORNL) is collaborating with Waukesha Electric Systems (WES) to develop a high-temperature superconducting (HTSC) utility power transformer with primary and secondary coils cooled by liquid nitrogen. Since the vacuum-insulated cryogenic coil dewar surrounds the magnetic core limb and cannot form a shorted turn, non-conductive materials are required. Two test vessels and a small prototype dewar have been fabricated by Scorpius Space Launch Company with epoxy/fiberglass composites, using their proprietary PRESSURMAXX vessel technology. The effects of pumping time, bakeout temperature, and cryogenic vessel temperature on vacuum outgassing rates have been investigated. Outgassing rates of the individual materials used in vessel construction have also been measured. The results will be scaled up to determine the required pumping capacity for a full-size 25-MVA commercial transformer dewar.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Disordering effects in the atomic structure of fine-crystalline HTSC YBa{sub 2}Cu{sub 3}O{sub y}

The atomic structure of YBa{sub 2}Cu{sub 3}O{sub y} fine-crystalline HTSC samples with various average crystallite sizes Left-Pointing-Angle-Bracket D Right-Pointing-Angle-Bracket ranging from 0.4 to 2 {mu}m and an oxygen concentration y close to the optimal value for superconductivity (y Almost-Equal-To 6.93) is investigated by the neutron diffraction technique. We have found some effects associated with the redistribution of cations and oxygen atoms and with variations in the positions of atomic layers in the unit cell, which are not observed in macrocrystalline samples. In all probability, these effects appear due to nonequilibrium conditions of synthesis required for obtaining this compound in the fine-crystalline state. The results have made it possible to explain the peculiar physical properties of fine-crystalline YBa{sub 2}Cu{sub 3}O{sub y} samples (in particular, the coexistence of high superconducting transition temperatures T{sub c} and noticeably lower values of magnetization in strong magnetic fields for T < T{sub c}). It is shown that a nanoscale structural inhomogeneity exists in fine-crystalline YBa{sub 2}Cu{sub 3}O{sub y} samples with the optimal oxygen content and changes the fundamental superconducting parameters, viz., the magnetic field penetration depth and the coherence length.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

YBa2Cu3O7 thin films on nanocrystalline diamond films for HTSC bolometer

Superconducting YBa2Cu3O(7-x) films on nanocrystalline diamond thin films have been fabricated. A composite buffer layer system consisting of diamond/Si3N4/YSZ/YBCO was explored for this purpose. The as-deposited YBCO films were superconducting with Tc of about 84 K and a relatively narrow transition width of about 8 K. SEM cross sections of the films showed very sharp interfaces between diamond/Si3N4 and between Si3N4/YSZ. The deposited YBCO film had a surface roughness of about 1000 A, which is suitable for high-temperature superconductive (HTSC) bolometer fabrication. It was also found that preannealing of the nanocrystalline diamond thin films at high temperature was very important for obtaining high-quality YBCO films.

Cui, G.↗

Stability mechanical considerations, and AC loss in HTSC monoliths, coils, and wires

For monolithic high-T(sub c) superconductors (HTSC's) calculations are presented of: (1) the initial flux jump field, H(sub fj), in melt-processed YBCO based on a field and temperature dependent J(sub c), and (2) the radial and circumferential stresses in solid and hollow cylinders containing trapped magnetic flux. For model multi filamentary (MF) HTSC/Ag strands calculations are presented of: (1) the limiting filament diameters for adiabatic and dynamic stability, and (2) the hysteretic and eddy current components of AC loss. Again for MF HTSC/Ag composite strands the need for filamentary subdivision and twisting is discussed.

Sumption, M. D.↗

Oxide perovskite crystals for HTSC film substrates microwave applications

The research focused upon generating new substrate materials for the deposition of superconducting yttrium barium cuprate (YBCO) has yielded several new hosts in complex perovskites, modified perovskites, and other structure families. New substrate candidates such as Sr(Al(1/2)Ta(1/2))O3 and Sr(Al(1/2)Nb(1/2))O3, Ba(Mg(1/3)Ta(2/3))O3 in complex oxide perovskite structure family and their solid solutions with ternary perovskite LaAlO3 and NdGaO3 are reported. Conventional ceramic processing techniques were used to fabricate dense ceramic samples. A laser heated molten zone growth system was utilized for the test-growth of these candidate materials in single crystal fiber form to determine crystallographic structure, melting point, thermal, and dielectric properties as well as to make positive identification of twin free systems. Some of those candidate materials present an excellent combination of properties suitable for microwave HTSC substrate applications.

Bhalla, A. S.↗

Vacuum Studies of a Prototype Composite Coil Dewar for HTSC Transformers

Oak Ridge National Laboratory (ORNL) is collaborating with Waukesha Electric Systems (WES) to develop a high-temperature superconducting (HTSC) utility power transformer with primary and secondary coils cooled by liquid nitrogen. Since the vacuuminsulated cryogenic coil dewar surrounds the magnetic core limb and cannot form a shorted turn, non-conductive materials are required. Two test vessels and a small prototype dewar have been fabricated by Scorpius Space Launch Company with epoxy/fiberglass composites, using their proprietary PRESSURMAXX vessel technology. The effects of pumping time, bakeout temperature, and cryogenic vessel temperature on vacuum outgassing rates have been investigated. Outgassing rates of the individual materials used in vessel construction have also been measured. The results will be scaled up to determine the required pumping capacity for a full-size 25-MVA commercial transformer dewar.

composites↗

Peculiarity of interrelation between electronic and magnetic properties of HTSC cuprates associated with short-range antiferromagnetic order

We report on the results of measurements of anisotropic resistivity of RBa{sub 2}Cu{sub 3}O{sub 6+x} (R = Tm, Lu) high-temperature superconducting single crystals in a wide range of doping levels, indicating a nontrivial effect of magnetic order on the electronic properties of cuprates. In particular, our results visually demonstrate the crossover from the state with moderate anisotropy of resistivity {rho}{sub c}/{rho}{sub ab} {approx} 30 to a strongly anisotropic state with {rho}{sub c}/{rho}{sub ab} {approx} 7 x 10{sup 3} upon cooling as well as upon a decrease in the hole concentration in the CuO{sub 2} planes. It is also shown that anisotropy is sensitive to the magnetic state of CuO{sub 2} planes and attains its maximum value after the establishment of the long-range antiferromagnetic order. The results are discussed in the framework of the theory based on the t-t'-t''-J model of CuO{sub 2} layers taking into account strong electron correlations and short-range magnetic order. In this theory, anomalies of spin correlators and Fermi surface topology for a critical hole concentration of p* {approx} 0.24 are demonstrated. The concentration dependence of the charge carrier energy indicates partial suppression of energy due to the emergence of a pseudogap at p < p*. This theory explains both the experimentally observed sensitivity of anisotropy in conductivity to the establishment of the antiferromagnetic order and the absence of anomalies in the temperature dependence of resistivity {rho}{sub ab}(T) in the vicinity of the Neel temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Iron pages of HTSC

Experimental data are presented on the superconducting and electronic properties of iron-based high-temperature superconductors in the normal and superconducting states. The following topics are discussed: lattice structure; structure of magnetic vortices; magnetic penetration depth; Fermi surface; isotope effect; and critical magnetic fields both in oxide compounds of 1111 type and oxide-free compounds of 122, 111, and 011 types as a function of the doping level, temperature, and external pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Schottky Anomalies in the Low-Temperature Specific Heat of YBa{sub 2}Cu{sub 3}O{sub y} HTSC

The evolution of the Schottky anomalies in the temperature dependence of the specific heat (in the temperature range T = 2–10 K and the magnetic field range H = 0–9 T) of polycrystalline YBa{sub 2}Cu{sub 3}O{sub y} HTSCs is studied when the oxygen content in coarse-crystalline samples changes and when the degree of structural disordering in optimally doped fine-crystalline samples of the same compound changes. The number of paramagnetic centers with uncompensated spin moments, which generate the Schottky anomalies, and the splitting of the lower energy levels are estimated. A correlation between these parameters and both the number of oxygen vacancies in chain planes and the method of oxygen ordering in chains is found. The experimental data are compared with the results of studying the magnetic susceptibility at T > T{sub c} in the same samples. Based on this comparison, we can conclude that the nature of the Schottky centers is related to the formation of paramagnetic centers at breaks in the Cu1–O4 copper–oxygen chains in the basal planes of the crystal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bulk high-temperature superconductivity in pressurized tetragonal La 2 PrNi 2 O 7

The Ruddlesden–Popper (R–P) bilayer nickelate, La 3 Ni 2 O 7 , was recently found to show signatures of high-temperature superconductivity (HTSC) at pressures above 14 GPa . Subsequent investigations achieved zero resistance in single-crystalline and polycrystalline samples under hydrostatic pressure conditions. Yet, obviousdiamagnetic signals, the other hallmark of superconductors, are still lacking owing to the flamentary nature with low superconducting volume fraction. The presence of a new 1313 polymorph and competing R–P phases obscured proper identification of the phase for HTSC. Thus, achieving bulk HTSC and identifying the phase at play are the most prominent tasks. Here we address these issues in the praseodymium (Pr)-doped La 2 PrNi 2 O 7 polycrystalline samples. We find that substitutions of Pr for La efectively inhibit the intergrowth of diferent R–P phases, resulting in a nearly pure bilayer structure. For La 2 PrNi 2 O 7 , pressure-induced orthorhombic to tetragonalstructural transition takes place at P c ≈ 11 GPa, above which HTSC emerges gradually on further compression. The superconducting transition temperatures at 18–20 GPa reach $T$ $^{onset}_{c}$ = $82.5$ $K$ and $T$ $^{zero}_{c}$ = $60$ $K$, which are the highest values, to our knowledge, among known nickelate superconductors. Importantly, bulk HTSC was testified by detecting clear diamagnetic signals below about 75 K with appreciable superconducting shielding volume fractions at a pressure of above 15 GPa. Further, our results not only resolve the existing controversies but also provide directions for exploring bulk HTSC in the bilayer nickelates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism and superconductivity of some Tl-Cu oxides

Many copper oxide based Thallium compounds have now been discovered. In comparison to the Bi-compounds, the Tl-system shows a richer diversity; viz., High Temperature Superconductors (HTSC) can be obtained with either one or two Tl-0 layers (m = 1,2); also, the triple-digit phases are easier to synthesize. The value of d, oxygen stoichiometry, is critical to achieving superconductivity. The Tl system is robust to oxygen loss; Tl may be lost or incorporated by diffusion. A diffusion coefficient equal to 10 ms at 900 C was determined. Both ortho-rhombic and tetragonal structures are evidenced, but HTSC behavior is indifferent to the crystal symmetry. This system has the highest T(sub c) confirmed. T(sub c) generally increases with p, the number of CuO layers, but tends to saturate at p = 3. Zero resistance as high as 125K has been observed. Most of these HTSC's are hole type, but the Ce-doped specimens may be electronic. The magnetic aspects were studied; because in addition to defining the perfectly diamagnetic ground state as in the conventional superconductors, magnetism of the copper oxides show a surprising variety. This is true of both the normal and the superconducting states. Also, due to the large phonon contribution to the specific heat at the high T(sub c) accurate thermal measurement of important parameters such as the sp. heat jump, electronic density of states, D(Ef) and coherence length are uncertain, and thus, are estimated from the magnetic results. Results from the Tl-system CuO, LaBaCuO, 120 and the Bi-CuO compounds are discussed. The emphasis is on the role of magnetism in the TlCuO HTSC, but technological aspects are also pointed out.

Datta, Timir↗

High temperature superconductivity technology for advanced space power systems

In 1987, the Lewis Research center of the NASA and the Argonne National Laboratory of the Department of Energy joined in a cooperative program to identify and assess high payoff space and aeronautical applications of high temperature superconductivity (HTSC). The initial emphasis of this effort was limited, and those space power related applications which were considered included microwave power transmission and magnetic energy storage. The results of these initial studies were encouraging and indicated the need of further studies. A continuing collaborative program with Argonne National Laboratory has been formulated and the Lewis Research Center is presently structuring a program to further evaluate HTSC, identify applications and define the requisite technology development programs for space power systems. This paper discusses some preliminary results of the previous evaluations in the area of space power applications of HTSC which were carried out under the joint NASA-DOE program, the future NASA-Lewis proposed program, its thrusts, and its intended outputs and give general insights on the anticipated impact of HTSC for space power applications of the future.

Faymon, Karl A.↗

Magnetism and superconductivity of some Tl-Cu oxides

Many copper oxide based Thallium compounds are now known. In comparison to the Bi-compounds, the Tl-system shows a richer diversity; i.e., High Temperature Superconductors (HTSC) can be obtained with either one or two Tl-0 layers (m = 1,2); also, the triple-digit phases are easier to synthesize. The value of d, oxygen stoichiometry, is critical to achieving superconductivity. The Tl system is robust to oxygen loss; Tl may be lost or incorporated by diffusion. A diffusion coefficient equal to 10 ms at 900 C was determined. Both ortho-rhombic and tetragonal structures are found, but HTSC behavior is indifferent to the crystal symmetry. This system has the highest T(sub c) confirmed. T(sub c) generally increases with p, the number of CuO layers, but tends to saturate at p = 3. Zero resistance was observed at temperatures as great as 125 K. Most of these HTSC's are hole type, but the Ce-doped specimens may be electronic. The magnetic aspects were studied; because in addition to defining the perfectly diamagnetic ground state as in conventional superconductors, magnetism of the copper oxides show a surprising variety. This is true of both the normal and the superconducting states. Also, due to the large phonon contribution to the specific heat at the high T(sub c) jump, electronic density of states, D(Ef), and coherence length are uncertain, and thus, are estimated from the magnetic results. Results from the Tl-system CuO, LaBaCuO,120 and the Bi-CuO compounds are discussed. The emphasis is on the role of magnetism in the Tl-CuO HTSC, but technological aspects are also pointed out.

Datta, Timir↗

Chemical vapor deposition of high T(sub c) superconducting films in a microgravity environment

Since the discovery of the YBaCuO bulk materials in 1987, Metalorganic Chemical Vapor Deposition (MOCVD) has been proposed for preparing HTSC high T(sub c) films. This technique is now capable of producing high-T(sub c) superconducting thin films comparable in quality to those prepared by any other methods. The MOCVD technique has demonstrated its superior advantage in making large area high quality HTSC thin films and will play a major role in the advance of device applications of HTSC thin films. The organometallic precursors used in the MOCVD preparation of HTSC oxide thin films are most frequently metal beta-diketonates. High T(sub c) superconductors are multi-component oxides which require more than one component source, with each source, containing one kind of precursor. Because the volatility and stability of the precursors are strongly dependent on temperature, system pressure, and carrier gas flow rate, it has been difficult to control the gas phase composition, and hence film stoichiometry. In order circumvent these problems we have built and tested a single source MOCVD reactor in which a specially designed vaporizer was employed. This vaporizer can be used to volatilize a stoichiometric mixture of diketonates of yttrium, barium and copper to produce a mixed vapor in a 1:2:3 ratio respectively of the organometellics. This is accomplished even though the three compounds have significantly different volatilities. We have developed a model which provides insight into the process of vaporizing mixed precursors to produce high quality thin films of Y1Ba2Cu3O7. It shows that under steady state conditions the mixed organometallic vapor must have a stoichiometric ratio of the individual organometallics identical to that in the solid mixture.

Levy, Moises↗

Cooper Pair Density of Bi 2 Sr 2 CaCu 2 O 8+ x in Atomic scale at 4.2 K

In pursuit of the elusive mechanism of high-T C superconductors (HTSC), spectroscopic imaging scanning tunneling microscopy (SI-STM) is an indispensable tool for surveying local properties of HTSC. Since a conventional STM utilizes metal tips, which allow the examination of only quasiparticles and not superconducting (SC) pairs, Josephson tunneling using STM has been demonstrated by many authors in the past. An atomically resolved scanning Josephson tunneling microscopy (SJTM), however, was realized only recently on Bi 2 Sr 2 CaCu 2 O 8+x (Bi-2212) below 50 mK and on the Pb(110) surface at 20 mK. Here we report the atomically resolved SJTM on Bi 2 Sr 2 CaCu 2 O 8+x at 4.2 K using Bi-2212 tips created in situ. The I-V characteristics show clear zero bias conductance peaks following Ambegaokar-Baratoff (AB) theory. A gap map was produced for the first time using an atomically resolved Josephson critical current map I C (r) and AB theory. Surprisingly, we found that this new gap map is anticorrelated to the gap map produced by a conventional method relying on the coherence peaks. Quasiparticle resonance due to a single isolated zinc atom impurity was also observed by SJTM, indicating that atomically resolved SJTM was achieved at 4.2 K. Lastly, our result provides a starting point for realizing SJTM at even higher temperatures, rendering possible investigation of the existence of SC pairs in HTSC above the T C .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗