Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HELMHOLTZ INSTABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Blob Formation and Ejection in Coronal Jets due to the Plasmoid and Kelvin–Helmholtz Instabilities

We perform 2D resistive magnetohydrodynamic simulations of coronal jets driven by flux emergence along the lower boundary. The reconnection layers are susceptible to the formation of blobs that are ejected in the jet. Our simulation with low plasma β (Case I) shows that magnetic islands form easily and propagate upward in the jet. These islands are multithermal and thus are predicted to show up in hot channels (335 Å and 211 Å) and the cool channel (304 Å) in observations by the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory . The islands have maximum temperatures of 8 MK, lifetimes of 120 s, diameters of 6 Mm, and velocities of 200 km s{sup −1}. These parameters are similar to the properties of blobs observed in extreme-ultraviolet (EUV) jets by AIA. The Kelvin–Helmholtz instability develops in our simulation with moderately high plasma β (Case II) and leads to the formation of bright vortex-like blobs above the multiple high magnetosonic Mach number regions that appear along the jet. These vortex-like blobs can also be identified in the AIA channels. However, they eventually move downward and disappear after the high magnetosonic Mach number regions disappear. In the lower plasma β case, the lifetime for the jet is shorter, the jet and magnetic islands are formed with higher velocities and temperatures, the current-sheet fragments are more chaotic, and more magnetic islands are generated. Our results show that the plasmoid instability and Kelvin–Helmholtz instability along the jet are both possible causes of the formation of blobs observed at EUV wavelengths.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of Cross Perturbations on Turbulent Kelvin–Helmholtz Instability

Kelvin–Helmholtz instability has been studied extensively in 2D. This study attempts to address the influence of turbulent flow and cross perturbation on the growth rate of the instability and the development of mixing layers in 3D by means of direct numerical simulation. Two perfect gases are considered to be working fluids moving as opposite streams, inducing shear instability at the interface between the fluids and resulting in Kelvin–Helmholtz instability. The results show that cross perturbation affects the instability by increasing the amplitude growth while adding turbulence has almost no effect on the amplitude growth. Furthermore, by increasing the turbulence intensity, a more distinct presence of the inner flow can be seen in the mixing layer of the two phases, and the presence of turbulence expands the range of high-frequency motion significantly due to turbulence structures. The results give a basis for which 3D Kelvin–Helmholtz phenomena should be further investigated using numerical simulation for predictive modeling, beyond the use of simplified 2D theoretical models.

Sementilli, Mae (ORCID:0000000207125928)↗

Hybrid simulations of plasma transport by Kelvin-Helmholtz instability at the magnetopause: magnetic shear

Two-dimensional hybrid (kinetic ions, massless fluid electrons) simulations of the Kelvin Helmholtz Instability (KHI) for a magnetopause configuration with a magnetic shear across the boundary are carried out to examine how the transport of magnetosheath plasma into the magnetosphere is affected by the shear field. Low magnetic shear conditions where the magnetosheath magnetic field is within 30{sup o} of northward is included in the simulations because KHI is thought to be important for plasma transport only for northward or near-northward interplanetary magnetic field orientations. The simulations show that coherent vortices can grow for these near-northward angles, and that they are sometimes more coherent than for pure northward conditions because the turbulence which breaks-down these vortices is reduced when there are magnetic tension forces. With increasing magnetic shear angle, the growth rate is reduced, and the vortices do not grow to as large of size which reduces the plasma transport. By tracking the individual particle motions diffusion coefficients can be obtained for the system, where the diffusion is not classical in nature but instead has a time dependence resulting from both the increasingly large-scale vortex motion and the small-scale turbulence generated in the break-down of the instabilities. Results indicate that diffusion on the order of 10{sup 9} m{sup 2}/s could possibly be generated by KHI on the flanks of the magnetosphere.

58 GEOSCIENCES↗

Competitions between Rayleigh-Taylor instability and Kelvin-Helmholtz instability with continuous density and velocity profiles

In this research, competitions between Rayleigh-Taylor instability (RTI) and Kelvin-Helmholtz instability (KHI) in two-dimensional incompressible fluids within a linear growth regime are investigated analytically. Normalized linear growth rate formulas for both the RTI, suitable for arbitrary density ratio with continuous density profile, and the KHI, suitable for arbitrary density ratio with continuous density and velocity profiles, are obtained. The linear growth rates of pure RTI ({gamma}{sub RT}), pure KHI ({gamma}{sub KH}), and combined RTI and KHI ({gamma}{sub total}) are investigated, respectively. In the pure RTI, it is found that the effect of the finite thickness of the density transition layer (L{sub {rho}}) reduces the linear growth of the RTI (stabilizes the RTI). In the pure KHI, it is found that conversely, the effect of the finite thickness of the density transition layer increases the linear growth of the KHI (destabilizes the KHI). It is found that the effect of the finite thickness of the density transition layer decreases the ''effective'' or ''local'' Atwood number (A) for both the RTI and the KHI. However, based on the properties of {gamma}{sub RT}{proportional_to}{radical}(A) and {gamma}{sub KH}{proportional_to}{radical}(1-A{sup 2}), the effect of the finite thickness of the density transition layer therefore has a completely opposite role on the RTI and the KHI noted above. In addition, it is found that the effect of the finite thickness of the velocity shear layer (L{sub u}) stabilizes the KHI, and for the most cases, the combined effects of the finite thickness of the density transition layer and the velocity shear layer (L{sub {rho}=}L{sub u}) also stabilize the KHI. Regarding the combined RTI and KHI, it is found that there is a competition between the RTI and the KHI because of the completely opposite effect of the finite thickness of the density transition layer on these two kinds of instability. It is found that the competitions between the RTI and the KHI depend, respectively, on the Froude number, the density ratio of the light fluid to the heavy one, and the finite thicknesses of the density transition layer and the velocity shear layer. Furthermore, for the fixed Froude number, the linear growth rate ratio of the RTI to the KHI decreases with both the density ratio and the finite thickness of the density transition layer, but increases with the finite thickness of the velocity shear layer and the combined finite thicknesses of the density transition layer and the velocity shear layer (L{sub {rho}=}L{sub u}). In summary, our analytical results show that the effect of the finite thickness of the density transition layer stabilizes the RTI and the overall combined effects of the finite thickness of the density transition layer and the velocity shear layer (L{sub {rho}=}L{sub u}) also stabilize the KHI. Thus, it should be included in applications where the transition layer effect plays an important role, such as the formation of large-scale structures (jets) in high energy density physics and astrophysics and turbulent mixing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental observations of turbulent mixing due to Kelvin-Helmholtz instability on the OMEGA Laser Facility

Shear-flow, Kelvin-Helmholtz (KH) turbulent mixing experiments were performed on the OMEGA Laser Facility [Boehly et al., Opt. Commun. 133, 495 (1997)] in which laser-driven shock waves propagated through a low-density plastic foam placed on top of a higher-density plastic foil. The plastic foil was comprised a thin iodine-doped plastic tracer layer bonded on each side to an undoped density-matched polyamide-imide plastic. Behind the shock front, lower-density foam plasma flowed over the higher-density plastic plasma, such that the interface between the foam and plastic was KH unstable. The initial perturbations consisted of pre-imposed, sinusoidal 2D perturbations, and broadband 3D perturbations due to surface roughness at the interface between the plastic and foam. KH instability growth was measured using side-on radiography with a point-projection 5-keV vanadium backlighter. Time-integrated images were captured on D-8 x-ray film. Spatial density profiles of iodine-doped plastic mixed with foam were inferred using x-ray radiographs. The mixing layer ensuing from the KH instability with layer width up to {approx}100 {mu}m was observed at a location {approx}1 mm behind the shock front. The measured mixing layer width was in good agreement with predictions based on a simple self-similar model of KH instability growth using an estimate of the shear velocity obtained from numerical simulations of the experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interactions between two magnetohydrodynamic Kelvin-Helmholtz instabilities

Kelvin-Helmholtz instability (KHI) driven by velocity shear is a generator of waves found away from the vicinity of the velocity-shear layers since the fast-mode waves radiated from the surface perturbation can propagate away from the transition layer. Thus the nonlinear evolution associated with KHI is not confined near the velocity-shear layer. To understand the physical processes in multiple velocity-shear layers, the interactions between two KHIs at a pair of tangential discontinuities are studied by two-dimensional magnetohydrodynamic simulations. It is shown that the interactions between two neighboring velocity-shear layers are dominated by the propagation of the fast-mode waves radiated from KHIs in a nonuniform medium. That is, the fast-mode Mach number of the surface waves M{sub Fy}, a key factor of the nonlinear evolution of KHI, will vary with the nonuniform background plasma velocity due to the existence of two neighboring velocity-shear layers. As long as the M{sub Fy} observed in the plasma rest frame across the neighboring velocity-shear layer is larger than one, newly formed fast-mode Mach-cone-like (MCL) plane waves generated by the fast-mode waves can be found in this region. As results of the interactions of two KHIs, reflection and distortion of the MCL plane waves generate the turbulence and increase the plasma temperature, which provide possible mechanisms of heating and accelerating local plasma between two neighboring velocity-shear layers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of the magnetic field generated by the Kelvin-Helmholtz instability

The Kelvin-Helmholtz instability in an ionized plasma is studied with a focus on the magnetic field generation via the Biermann battery (baroclinic) mechanism. The problem is solved by using direct numerical simulations of two counter-directed flows in 2D geometry. The simulations demonstrate the formation of eddies and their further interaction and merging resulting in a large single vortex. In contrast to general belief, it is found that the instability generated magnetic field may exhibit significantly different structures from the vorticity field, despite the mathematically identical equations controlling the magnetic field and vorticity evolution. At later stages of the nonlinear instability development, the magnetic field may keep growing even after the hydrodynamic vortex strength has reached its maximum and started decaying due to dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Excitation of a magnetospheric MHD cavity by Kelvin-Helmholtz instability

The Kelvin-Helmholtz instability is investigated analytically by using a one-dimensional nonuniform model of the Earth's magnetosphere and the adjacent solar wind region. Its properties are shown to be essentially governed by the presence of an MHD cavity that arises in the magnetosphere because of the non-uniformity of the latter and also because of the jump in the parameters of the medium at the magnetopause (the outer boundary of the magnetosphere). System oscillations constitute a discrete spectrum of eigenmodes, which are determined by the wave vector k{sub t} along the tangential discontinuity and also by the mode number n = 0, 1, 2, Horizontal-Ellipsis , playing the role of the wavenumber along a coordinate normal to the magnetopause. Analytic expressions are obtained for the frequency and instability growth rate of each eigenmode and for the functions describing its spatial structure. All these quantities depend parametrically on the solar wind velocity V{sub W}, or more precisely, on the Doppler frequency shift {omega}{sub W} = k{sub t} {center_dot} V{sub W}. For each eigenmode, there is a lower instability threshold depending on the parameter {omega}{sub W} and a sharp maximum in the growth rate at the eigenfrequency of the magnetospheric cavity. For {omega}{sub W} values below the threshold, the properties of an eigenmode are highly sensitive to the type of solar wind nonuniformity. Three cases are considered: a uniform solar wind and solar winds in which the speed of sound increases or decreases away from the magnetopause.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetopause Kelvin-Helmholtz instability

The Kelvin-Helmholtz instability as it applies to the dayside magnetopause is reviewed. Simple theory suggests the boundary should generally be unstable to waves moving at a large angle to the Earth's field. Nonlinear effects, how amplitudes might be limited, and what dynamic role the instability could have in boundary regions in stimulating mass and momentum transfer are discussed. Examination of data from a particular ISEE spacecraft pass shows relatively small amplitude (750 km) waves present on the boundary. Corresponding wavelength estimates show wave momentum is not significant at the time of the pass.

Southwood, D. J.↗

The inviscid incompressible limit of Kelvin–Helmholtz instability for plasmas

The Kelvin–Helmholtz Instability (KHI) is an interface instability that develops between two fluids or plasmas flowing with a common shear layer. KHI occurs in astrophysical jets, solar atmosphere, solar flows, cometary tails, planetary magnetospheres. Two applications of interest, encompassing both space and fusion applications, drive this study: KHI formation at the outer flanks of the Earth’s magnetosphere and KHI growth from non-uniform laser heating in magnetized direct-drive implosion experiments. Here, we study 2D KHI with or without a magnetic field parallel to the flow. We use both the GAMERA code, which solves the compressible Euler equations, and the STRATOSPEC code, which solves the Navier-Stokes equations under the Boussinesq approximation, coupled with the magnetic field dynamics. GAMERA is a global three-dimensional MHD code with high-order reconstruction in arbitrary nonorthogonal curvilinear coordinates, which is developed for a large range of astrophysical applications. STRATOSPEC is a three-dimensional pseudo-spectral code with an accuracy of infinite order (no numerical diffusion). Magnetized KHI is a canonical case for benchmarking hydrocode simulations with extended MHD options. An objective is to assess whether or not, and under which conditions, the incompressibility hypothesis allows to describe a dynamic compressible system. For comparing both codes, we reach the inviscid incompressible regime, by decreasing the Mach number in GAMERA, and viscosity and diffusion in STRATOSPEC. Here, we specifically investigate both single-mode and multi-mode initial perturbations, either with or without magnetic field parallel to the flow. The method relies on comparisons of the density fields, 1D profiles of physical quantities averaged along the flow direction, and scale-by-scale spectral densities. We also address the triggering, formation and damping of filamentary structures under varying Mach number or Atwood number, with or without a parallel magnetic field. Comparisons show very satisfactory results between the two codes. The vortices dynamics is well reproduced, along with the breaking or damping of small-scale structures. We end with the extraction of growth rates of magnetized KHI from the compressible regime to the incompressible limit in the linear regime assessing the effects of compressibility under increasing magnetic field. The observed differences between the two codes are explained either from diffusion or non-Boussinesq effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ISEE 3 magnetopause crossings - Evidence for the Kelvin-Helmholtz instability

The role of the Kelvin-Helmholtz instability in driving magnetopause motion is investigated on the basis of correlated ISEE-3 magnetometer measurements and IMP-8 solar-wind/magnetosheath velocities. The data are presented in graphs and briefly characterized, comparing the daily frequency of magnetopause crossings by ISEE-3 with the velocities. It is found that the instability criterion for longitudinal waves is only rarely satisfied in these measurements, while that for waves with an azimuthal component is satisfied in over 50 percent of the cases. It is inferred that the Kelvin-Helmholtz instability is probably the cause of motions with magnetotail-boundary interarrival times of 20 min or less.

Sibeck, D. G.↗

FORMING PLANETESIMALS BY GRAVITATIONAL INSTABILITY. I. THE ROLE OF THE RICHARDSON NUMBER IN TRIGGERING THE KELVIN-HELMHOLTZ INSTABILITY

Gravitational instability (GI) of a dust-rich layer at the midplane of a gaseous circumstellar disk is one proposed mechanism to form planetesimals, the building blocks of rocky planets and gas giant cores. Self-gravity competes against the Kelvin-Helmholtz instability (KHI): gradients in dust content drive a vertical shear which risks overturning the dusty subdisk and forestalling GI. To understand the conditions under which the disk can resist the KHI, we perform three-dimensional simulations of stratified subdisks in the limit that dust particles are small and aerodynamically well coupled to gas, thereby screening out the streaming instability and isolating the KHI. Each subdisk is assumed to have a vertical density profile given by a spatially constant Richardson number Ri. We vary Ri and the midplane dust-to-gas ratio {mu}{sub 0} and find that the critical Richardson number dividing KH-unstable from KH-stable flows is not unique; rather, Ri{sub crit} grows nearly linearly with {mu}{sub 0} for {mu}{sub 0} = 0.3-10. Plausibly, a linear dependence arises for {mu}{sub 0} << 1 because in this regime the radial Kepler shear replaces vertical buoyancy as the dominant stabilizing influence. Why this dependence should persist at {mu}{sub 0} > 1 is a new puzzle. The bulk (height-integrated) metallicity is uniquely determined by Ri and {mu}{sub 0}. Only for disks of bulk solar metallicity is Ri{sub crit} {approx} 0.2, which is close to the classical value. Our empirical stability boundary is such that a dusty sublayer can gravitationally fragment and presumably spawn planetesimals if embedded within a solar metallicity gas disk {approx}4x more massive than the minimum-mass solar nebula; or a minimum-mass disk having {approx}3x solar metallicity; or some intermediate combination of these two possibilities. Gravitational instability seems possible without resorting to the streaming instability or to turbulent concentration of particles.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of single-mode, Kelvin-Helmholtz instability in a supersonic flow

This manuscript reports the first observations of the Kelvin-Helmholtz instability evolving from well-characterized seed perturbations in a steady, supersonic flow. The Kelvin-Helmholtz instability occurs when two fluids move parallel to one another at different velocities, and contributes to an intermixing of fluids and transition to turbulence. It is ubiquitous in nature and engineering, including terrestrial systems such as cloud formations, astrophysical systems such as supernovae, and laboratory systems such as fusion experiments. In a supersonic flow, the growth rate of the instability is inhibited due to effects of compressibility. These effects are still not fully understood, and hold the motivation for the current work. The data presented here were obtained by developing a novel experimental platform capable of sustaining a steady shockwave over a precision-machined interface for unprecedented durations. The chosen interface was a well-characterized, single-mode sine wave, allowing us to document the evolution of individual vortices at high resolution. Understanding the behavior of individual vortices is the first of two fundamental steps towards developing a comprehensive model for the Kelvin-Helmholtz instability in a compressible flow. The results of this experiment were well reproduced with 2D hydrodynamic simulations. The platform has been extended to additional experiments, which study the evolution of different hydrodynamic instabilities in steady, supersonic flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Destabilizing effect of density gradient on the Kelvin-Helmholtz instability

In this paper, we derive explicit analytic formulas for the linear growth rate and frequency of the Kelvin-Helmholtz instability in fluids with the density gradient. The analytic formulas are in excellent agreement with the results of two-dimensional numerical simulation. We found that the density gradient effect enforces (destabilizes) the Kelvin-Helmholtz instability by increasing its linear growth rate in the direction normal to the perturbed interface. The frequency is reduced (stabilized) by the density gradient effect, i.e., the density gradient decreases the transmission of the perturbation in the direction along to the perturbed interface. In most cases, the combined effect of density and velocity gradients stabilizes the Kelvin-Helmholtz instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effects of cold plasma on the Kelvin-Helmholtz instability

The results are presented of a detailed study that examines the effects of cold plasma on the Kelvin-Helmholtz instability. Both electrostatic and electromagnetic modes are considered. The interest in the Kelvin-Helmholtz instability stems from observations of low frequency waves in the polar cusp, magnetopause, in fast moving auroral forms, the plasma pause, and other regions of magnetospheric flow boundaries. It is pointed out that the Kelvin-Helmholtz instability is driven by a velocity shear and can excite a broad spectrum of wave frequencies below the ion gyrofrequency. A model is obtained of a flow boundary that includes a density gradient perpendicular to the velocity shear. The analysis shows a compressional component in Kelvin-Helmholtz waves.

Melander, B. G.↗

The onset and development of Kelvin-Helmholtz instability at the Venus ionopause

The paper investigates the Kelvin-Helmholtz instability at the Venus ionopause resulting from the flow of the (shocked) solar wind tangential to the ionopause for the case where the interplanetary field is oriented normal to the direction of flow. It is found that gravity stabilizes the long wavelength perturbations, and the finite thickness of the boundary layer stabilizes short wavelength modes. The magnetic 'gyroviscosity' due to finite Larmor radius effects either destabilizes the boundary or stabilizes it according to whether the solar wind electric field points away from or toward the ionosphere. For solar wind and ionosphere plasma parameters consistent with Pioneer Venus observations, it is found that the instabilities with the greatest growth rates (shortest growth times) have wavelengths of 50-150 km and growth times of 0.5 to several seconds. In addition, it is found how distortion of the ionopause by Kelvin-Helmholtz instability might lead to the formation of magnetic 'flux ropes' inside the ionosphere as well as ionospheric 'bubbles' embedded in the solar wind.

Wolff, R. S.↗

Influence of a density increase on the evolution of the Kelvin-Helmholtz instability and vortices

Results of two-dimensional nonlinear numerical simulations of the magnetohydrodynamic Kelvin-Helmholtz instability are presented. A boundary layer of a certain width is assumed, which separates the plasma in the upper layer from the plasma in the lower layer. A special focus is given on the influence of a density increase toward the lower layer. The evolution of the Kelvin-Helmholtz instability can be divided into three different phases, namely, a linear growth phase at the beginning, followed by a nonlinear phase with regular structures of the vortices, and finally, a turbulent phase with nonregular structures. The spatial scales of the vortices are about five times the initial width of the boundary layer. The considered configuration is similar to the situation around unmagnetized planets, where the solar wind (upper plasma layer) streams past the ionosphere (lower plasma layer), and thus the plasma density increases toward the planet. The evolving vortices might detach around the terminator of the planet and eventually so-called plasma clouds might be formed, through which ionospheric material can be lost. For the special case of a Venus-like planet, loss rates are estimated, which are of the order of estimated loss rates from observations at Venus.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗