Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HELIUM 3 BEAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Reference Cross Sections for Charged-particle Monitor Reactions

Evaluated cross sections of beam-monitor reactions are expected to become the de-facto standard for cross-section measurements that are performed over a very broad energy range in accelerators in order to produce particular radionuclides for industrial and medical applications. The requirements for such data need to be addressed in a timely manner, and therefore an IAEA coordinated research project was launched in December 2012 to establish or improve the nuclear data required to characterise charged-particle monitor reactions. An international team was assembled to recommend more accurate cross-section data over a wide range of targets and projectiles, undertaken in conjunction with a limited number of measurements and more extensive evaluations of the decay data of specific radionuclides. Least-square evaluations of monitor-reaction cross sections including uncertainty quantification have been undertaken for charged-particle beams of protons, deuterons, 3 He- and 4 He-particles. In conclusion, recommended beam monitor reaction data with their uncertainties are available at the IAEA-NDS medical portal www-nds.iaea.org/medical/monitor_reactions.html.

43 PARTICLE ACCELERATORS↗

The first operation of 56 MHz SRF cavity in RHIC

A 56 MHz superconducting RF cavity has been designed, fabricated and installed in the Relativistic Heavy Ion Collider (RHIC). The cavity operates at 4.4 K with a “quiet helium source” to isolate the cavity from environmental acoustic noise. The cavity is a beam driven quarter wave resonator. It is detuned and damped during injection and acceleration cycles and is brought to operation only at store energy. For a first test operation, the cavity voltage was stabilized at 300 kV with full beam current. Within both Au + Au and asymmetrical Au + He3 collisions, luminosity improvement was detected from direct measurement, and the hourglass effect was reduced. One higher order mode (HOM) coupler was installed on the cavity. We report in this paper on our measurement of a broadband HOM spectrum excited by the Au beam.

43 PARTICLE ACCELERATORS↗

Nuclear Data Sheets for A = 178

The present revision of the nuclear structure properties for the nuclides belonging to the A = 178 mass chain contains many improvements and additions to the material presented in the previous evaluation (1994Br18, Nucl. Data Sheets 72, 221 (1994)). Besides updating many values, and including supplementary data for already known levels, transitions and level schemes, the most noteworthy modifications with respect to the prior evaluation are extensive additions to the level schemes of {sup 178}Yb, {sup 178}Hf, {sup 178}Ta, {sup 178}W. {sup 178}Ir, {sup 178}Pt and {sup 178}Hg, based on HI reaction works performed after the last cutoff date (July 1993), and to {sup 178}Hf due to new data from recent Coulomb excitation experiments. Light ion ({sup 3}He, {alpha}) beam experiments have added many data for {sup 178}Ta. Beta decay studies have also provided significant data for {sup 178}W and {sup 178}Pt. Lastly the first report of the identification of {sup 178}Tl and {sup 178}Pb is included.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An improved high intensity recycling helium-3 beam source

We describe an improved high intensity, recycling, supersonic atomic beam source. Changes address several issues previously limiting performance and reliability of the apparatus, including the use of newly available vacuum pumps and modifications to the recycling system. We achieve a source intensity of 2.5x10{sup 19} atoms/s/sr, almost twice that previously achievable during recycling. Current limits on intensity are discussed.

43 PARTICLE ACCELERATORS↗

RCNP Project on Polarized {sup 3}He Ion Sources - From Optical Pumping to Cryogenic Method

A polarized {sup 3}He ion source has been developed at RCNP for intermediate and high energy spin physics. Though we started with an OPPIS (Optical Pumping Polarized Ion Source), it could not provide highly polarized {sup 3}He beam because of fundamental difficulties. Subsequently to this unhappy result, we examined novel types of the polarized {sup 3}He ion source, i.e., EPPIS (Electron Pumping Polarized Ion Source), and ECRPIS (ECR Polarized Ion Source) experimentally or theoretically, respectively. However, attainable {sup 3}He polarization degrees and beam intensities were still insufficient for practical use. A few years later, we proposed a new idea for the polarized {sup 3}He ion source, SEPIS (Spin Exchange Polarized Ion Source) which is based on enhanced spin-exchange cross sections at low incident energies for {sup 3}He{sup +}+Rb, and its feasibility was experimentally examined.Recently, we started a project on polarized {sup 3}He gas generated by the brute force method with low temperature (approx4 mK) and strong magnetic field (approx17 T), and rapid melting of highly polarized solid {sup 3}He followed by gasification. When this project will be successful, highly polarized {sup 3}He gas will hopefully be used for a new type of the polarized {sup 3}He ion source.

43 PARTICLE ACCELERATORS↗

Decay of {sup 6}Be populated in the {sup 6}Li({sup 3}He,{sup 3}H) charge-exchange reaction

A complete kinematic measurement of the {sup 6}Li({sup 3}He,{sup 3}H)alphapp reaction is performed at E{sub lab}=50 MeV, to investigate the cluster structure of {sup 6}Be. The energy and angular distributions of the breakup particles, emitted from the ground and first excited states of {sup 6}Be, are compared to three-body resonance and two-body sequential decay calculations. The results indicate a rather pure three-body configuration of the 2{sup +} state of {sup 6}Be but they are not conclusive regarding the decay mode of the 0{sup +} state. No branching ratio between sequential and three-body decay paths could be extracted. Excitations above the 2{sup +} state were populated at E{sub x}=1.67-23 MeV. Decay through {sup 5}Li-p and {sup 2}He-{sup 4}He channels is identified in the continuum of {sup 6}Be, and the reaction mechanism is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Present Status And Future Prospects Of Polarized Ion Sources

Recent progress in polarized ion sources development is reviewed. New techniques for production of polarized H{sup -} ion (proton), D{sup -} (D{sup +}) and {sup 3}He{sup ++} ion beams are discussed. Feasibility studies of these techniques are in progress at BNL and other laboratories. Polarized deuteron beams will be required for the polarization program at the Dubna Nuclotron and at the deuteron Electric Dipole Moment experiment at BNL. Experiments with polarized {sup 3}He{sup ++} ion beams are a part of the experimental program at the future Electron Ion Collider.

43 PARTICLE ACCELERATORS↗

Opportunities for Polarized He-3 in RHIC and EIC [Slides]

The workshop on opportunities for polarized He-3 in RHIC and EIC was targeted at finding practical ways of implementing and using polarized He-3 beams. Polarized He-3 beams will provide the unique opportunity for first measurements, i.e, to a full quark flavor separation measuring single spin asymmetries for p + , p - and p 0 in hadron-hadron collisions. In electron ion collisions the combination of data recorded with polarized electron proton/He-3 beams allows to determine the quark flavor separated helicity and transverse momentum distributions. The workshop had sessions on polarized He-3 sources, the physics of colliding polarized He-3 beams, polarimetry, and beam acceleration in the AGS Booster, AGS, RHIC, and ELIC. The material presented at the workshop will allow making plans for the implementation of polarized He-3 beams in RHIC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Toward precise Q{sub EC} values for the superallowed 0{sup +}->0{sup +} beta decays of T=2 nuclides: The masses of {sup 20}Na, {sup 24}Al, {sup 28}P, and {sup 32}Cl

High-precision measurements of superallowed 0{sup +}->0{sup +} beta decays of T=2 nuclides such as {sup 20}Mg, {sup 24}Si, {sup 28}S, and {sup 32}Ar can contribute to searches for physics beyond the standard model of particle physics if the Q{sub EC} values are accurate to a few keV or better. As a step toward providing precise Q{sub EC} values for these decays, the ground-state masses of the respective daughter nuclei {sup 20}Na, {sup 24}Al, {sup 28}P, and {sup 32}Cl have been determined by measuring the ({sup 3}He,t) reactions leading to them with the {sup 36}Ar({sup 3}He,t){sup 36}K reaction as a calibration. A quadrupole-dipole-dipole-dipole (Q3D) magnetic spectrograph was used together with thin ion-implanted carbon-foil targets of {sup 20}Ne, {sup 24}Mg, {sup 28}Si, {sup 32}S, and {sup 36}Ar. The masses of {sup 20}Na and {sup 32}Cl are found to be in good agreement with the values from the 2003 Atomic Mass Evaluation (AME03) [G. Audi, A. H. Wapstra, and C. Thibault, Nucl. Phys. A 729, 337 (2003)], and the precision has been improved by a factor of 6 in both cases. The masses of {sup 24}Al and {sup 28}P are found to be higher than the values from AME03 by 9.5 keV (3.2sigma) and 11.5 keV (3.6sigma), respectively, and the precision has been improved by a factor of 2.5 in both cases. The new {sup 32}Cl mass is used together with the excitation energy of its lowest T=2 level and the mass of {sup 32}Ar to derive an improved superallowed Q{sub EC} value of 6087.3(22) keV for this case. The effects on quantities related to standard-model tests including the beta-nu correlation coefficient a and the isospin-symmetry-breaking correction delta{sub C} are examined for the A=32 case.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A model of polarized-beam AGS in the ray-tracing code Zgoubi

A model of the Alternating Gradient Synchrotron, based on the AGS snapramps, has been developed in the stepwise ray-tracing code Zgoubi. It has been used over the past 5 years in a number of accelerator studies aimed at enhancing RHIC proton beam polarization. It is also used to study and optimize proton and Helion beam polarization in view of future RHIC and eRHIC programs. The AGS model in Zgoubi is operational on-line via three different applications, ’ZgoubiFromSnaprampCmd’, ’AgsZgoubiModel’ and ’AgsModelViewer’, with the latter two essentially interfaces to the former which is the actual model ’engine’. All three commands are available from the controls system application launcher in the AGS ’StartUp’ menu, or from eponymous commands on shell terminals. Main aspects of the model and of its operation are presented in this technical note, brief excerpts from various studies performed so far are given for illustration, means and methods entering in ZgoubiFromSnaprampCmd are developed further in appendix.

43 PARTICLE ACCELERATORS↗

Polarization of the light from the 3P(1)-2S(1) transition in proton beam excited helium

Measurements of the polarization of the light from the 3 1p-2 1s transition in proton beam excited Helium have shown both a proton beam energy and Helium target gas pressure dependence. Results for the linear polarization fraction range from +2.6% at 100 keV proton energy to -5.5% at 450 keV. The zero crossover occurs at approximately 225 keV. This is in good agreement with other experimental work in the field, but in poor agreement with theoretical predictions. Measurements at He target gas pressures as low as .01 mtorr show that the linear polarization fraction is still pressure dependent at .01 mtorr.

Weinhous, M. S.↗

Thoughts on polarimetry for {sup 3}He beams at RHIC

The Relativistic Heavy Ions Collider (RHIC) has accelerated polarized proton beams for physics since 2001. As part of the future eRHIC program and in order to enhance access to the down quark, a program to accelerate polarized {sup 3}He in the AGS and RHIC is envisioned. To that end, a polarized {sup 3}He source is being built at MIT. This will be installed on the BNL EBIS source in preparation for injection into the booster and AGS. As an early exercise, in June 2012, unpolarized {sup 3}He beams have been accelerated in the AGS. This paper will peruse some potential ideas for {sup 3}He polarimetry and calibration that could be utilized at the AGS as well as RHIC. The current proton polarimetry program serves as a guide.

43 PARTICLE ACCELERATORS↗

Search for {sup 7}H in {sup 2}H+{sup 8}He collisions

An experimental search for the low-lying {sup 7}H resonance was performed with the {sup 2}H({sup 8}He{sup 3}He){sup 7}H reaction studied at forward center-of-mass angles (6 deg. - 14 deg.) with a 42 A MeV {sup 8}He beam. No well-pronounced peak of {sup 7}H was observed; however, the obtained spectrum was found to have a peculiarity at approx2 MeV above the t+4n threshold. The data allow us to set a c.m.s. cross section level of approx30 mub/sr for the low-energy part of the {sup 7}H spectrum. The test reaction {sup 2}H({sup 12}Be{sup 3}He){sup 11}Li, involving the same one-proton (d,{sup 3}He) transfer, was studied simultaneously on a 71 A MeV satellite beam where a cross section of approx =1 mb/sr was measured for the population of the {sup 11}Li ground state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Explore the possibility of accelerating polarized He-3 beam in RHIC

As the world's first high energy polarized proton collider, RHIC has made significant progresses in measuring the proton spin structure in the past decade. In order to have better understanding of the contribution of up quarks and down quarks to the proton spin structure, collisions of high energy polarized neutron beams are required. Polarized He-3 beams offer an effectiveway to provide polarized neutron beams. In this paper, we present studies of accelerating polarized He-3 in RHIC with the current dual snake configuration. Possibilities of adding two more pairs of snakes for accelerating polarized He-3 were explored. Results of six snake configuration in RHIC are also reported in the paper.

43 PARTICLE ACCELERATORS↗

Microstructure analysis of laser beam weldments performed on neutron-irradiated 304L steel containing 3 and 8 appm helium

We report that AISI 304 L austenitic stainless steel is one of the major structural materials used in light water reactors (LWRs). In the future, 304 L components may require repair, and several welding techniques have been proposed as candidates. In this study, laser beam welding using the low-energy contribution approach was performed in ~2016 on neutron-irradiated AISI 304 L steel with nominal values of 3 and 8 appm helium (He). The goal was to investigate the impact of helium on the irradiated material weldability and evaluate helium-associated damage. The weld and heat-affected zone (HAZ) microstructure was studied using scanning electron microscopy, electron backscatter diffraction, and transmission electron microscopy (TEM). Analysis of the weldment cross-sections did not reveal severe cracking. Still, evidence of incipient helium-associated damage was observed in the HAZ, manifesting as degraded grain boundaries (GBs) “decorated” by pore chains and mostly small (i.e., ≤ 25-30 µm) scattered cracks. The largest observed crack was ~50 µm in length. Helium-associated damage was localized within ~200-300 µm of the weld pool boundary, and the fraction of the compromised GBs, as a rule, was below ~9-11% of the total GB network. TEM analysis showed significant annealing of the radiation-induced defects at distances up to ~300 µm from the weld pool boundary. Inside the HAZ, the cavities (likely, helium bubbles) tended to form at GBs and inclusions, such as manganese sulfide precipitates in the grain interior. Crystallography analysis of the HAZ damage showed that random high-angle boundaries were most susceptible to helium-associated damage. In contrast, low-angle random boundaries and twin boundaries appeared to be strongly resistant to degradation from the combined effects of helium and welding.

36 MATERIALS SCIENCE↗

Generation of high-energy (>15 MeV) neutrons using short pulse high intensity lasers

A roadmap is suggested and demonstrated experimentally for the production of high-energy (>15 MeV) neutrons using short pulse lasers. Investigation with a 3D Monte Carlo model has been employed to quantify the production of energetic neutrons. Numerical simulations have been performed for three nuclear reactions, d(d,n){sup 3}He, {sup 7}Li(d,n){sup 8}Be, and {sup 7}Li(p,n){sup 7}Be, driven by monoenergetic ion beams. Quantitative estimates for the driver ion beam energy and number have been made and the neutron spectra and yield in the ion propagation direction have been evaluated for various incident ion energies. In order to generate neutron fluence above a detection limit of 10{sup 6} neutrons/sr, either {approx}10{sup 10} protons with energy 20-30 MeV or comparable amount of deuterons with energy 5-10 MeV are required. Experimental verification of the concept with deuterons driven by the Titan laser (peak intensity 2 Multiplication-Sign 10{sup 19} W/cm{sup 2}, pulse duration of 9 ps, wavelength 1.05 {mu}m, and energy of 360 J) is provided with the generation of neutrons with energy of up to 18 MeV from {sup 7}Li(d,n){sup 8}Be reactions. Future research will focus on optimized schemes for ion acceleration for production of high-energy neutrons, which will involve efficient target design, laser parameter optimization, and converter material.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental study of the {sup 56}Ni({sup 3}He,d){sup 57}Cu reaction in inverse kinematics

Measurements of ({sup 3}He,d) reactions can provide information on the proton widths of states that play a role in astrophysically important (p,{gamma}) reactions. We report on the first study of the ({sup 3}He,d) reaction in inverse kinematics with a {sup 56}Ni (T{sub 1/2}=6.1 d) ion beam. The Q-value resolution of {approx} keV achieved in this experiment was sufficient to separate the transitions populating the ground state and the 1/2{sup -}-5/2{sup -} doublet at E{sub x}{approx}1.1 MeV in {sup 57}Cu. Prospects for similar ({sup 3}He,d) experiments with improved energy resolution are also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗