Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Group-V doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Sb doping via drive-in diffusion as an alternative to in-situ doping in VTD

Group-V doping can enhance the efficiency of CdTe photovoltaic devices by increasing the open-circuit voltage (Voc), if long lifetimes can be retained and radiative voltage loss can be avoided. In this preliminary study, ex-situ Sb doping via drive-in diffusion improved grain sizes compared to Sb-free films without CdCl2 treatment. Sb doping did not reduce the carrier lifetime for uniform CdSeTe absorbers. Additionally, the CST-air surface recombination decreased with Sb. No potential fluctuations were observed by PL at this doping level. The [Sb] and carrier concentration for this study are not yet measured so the conclusions drawn are all preliminary

14 SOLAR ENERGY↗
DOE OSTI2024

Self-compensation of group-V acceptors in CdTe

Cadmium Telluride is at the core of an important thin-film technology for photovoltaics that is already commercially available, yet the CdTe-based solar cell efficiency remains limited at 22%, well below the theoretical limit of ~30%. Increasing the hole concentration is crucial for higher efficiency, and group-V elements such as As, P, and Sb are potential dopants as they are shallow acceptors. Nevertheless, group-V doped p-type CdTe often exhibits low doping activation, and the compensation source remains debated. Here, we performed hybrid density functional calculations with spin-orbit coupling to investigate possible sources of hole compensation in group-V doped CdTe. First, regarding possible self-compensation of the group-V dopants, we find that the formation of AX centers is unlikely since they are found to be unstable relative to the shallow acceptor forms. However, if the group-V dopants come in during growth (such as dimer molecules As2, P2, and Sb2), we find that the impurity atoms, which would occupy nearest neighbor sites, maintain the V-V bonds, limiting the hole density. For the native defects, our study reveals that Cd interstitial is the lowest energy donor defect in p-type CdTe. Still, it has a small migration barrier of 0.5 eV, making it highly mobile and unstable at room temperature. The Te vacancy is the next lowest formation energy donor. The migration barrier of 1.4 eV indicates that the Te vacancy is stable at room temperature. The antisite CdTe is also a donor, with low formation energy and stable at room temperature, potentially limiting the hole concentration. Our results, therefore, shed light on possible compensation centers and some guidance on how to avoid them.

14 SOLAR ENERGY↗
DOE OSTI2025

Arsenic activation and compensation in single crystal CdTe bilayers

In state-of-the art polycrystalline CdTe photovoltaics, group-V dopant activation is about 2%. Low activation can create electronic defects and lead to recombination and band tail losses. To develop methods to overcome this limitation, dopant activation was systematically investigated using molecular beam epitaxy (MBE) grown single crystal bilayers of As-doped CdTe on undoped CdTe. Results suggest multiple paths for improved As-activation in polycrystalline CdTe-based devices. It was found that the carrier concentration in this MBE material saturated at ∼3 × 1016 cm−3, with high levels (>50%) of As-activation possible. High activation could be achieved with a post-growth activation temperature of ∼450 °C, when the initial doping level was below the saturation level. However, at typical polycrystalline As incorporation levels (>5 × 1016 cm−3), the excess As is inactive or compensating, requiring elevated temperatures (500–600 °C) to achieve high activation. Oxygen in the annealing ambient was detrimental, while the effect of CdCl2 in the ambient is more case-dependent. A 575 °C activation anneal was combined with a 450 °C CdCl2 treatment to better understand the implications for polycrystalline CdTe. Interestingly, on highly doped samples, processes ending with a high temperature step displayed high activation, while those ending at 450 °C significantly reduced the carrier concentration (with or without CdCl2 in the ambient). Low activation can be restored with another high temperature anneal, allowing reproducible toggling between high and low activation based on the final temperature. Photoluminescence revealed the presence of donor–acceptor pairs in the low activation state that appear to be associated with a compensating defect.

14 SOLAR ENERGY↗
DOE OSTI2024

Selective incorporation of antimony into gallium nitride

Dilute concentrations of antimony (Sb) incorporation into GaN induce strong bandgap bowing and tunable room-temperature photoluminescence from the UV to the green spectral regions. However, the atomistic details of the incorporation of Sb into the GaN host remain unclear. In this work, we use first-principles calculations to understand the thermodynamics of Sb substitution into GaN and its effect on the optical and Raman spectra. Although it is empirically considered that Sb is preferentially incorporated as an anion (Sb3−) into the N sublattice, we demonstrate that Sb can also be incorporated as a cation (Sb3+, Sb5+) into the metal sublattice. Our thermodynamic analysis demonstrates that SbN0, SbGa2+, and SbGa0 can co-exist under Ga-rich conditions in n-type samples. We further confirm the dual incorporation of Sb by calculating the vibrational frequencies of different anionic and cationic substitutions to explain the origins of experimentally observed additional Raman peaks of Sb-doped GaN. Moreover, the calculated band structures of different Sb substitutions into GaN explain the experimental photoluminescence and optical absorption spectra. Overall, our analysis suggests that the coexistence of Sb3−, Sb3+, and Sb5+ substitutions into GaN explains the totality of experimental measurements. Our results demonstrate that the selective incorporation of Sb into GaN (and potentially other group-V elements such as As, P, or Bi) by tuning the growth conditions can drastically modify the electronic properties, for applications in visible light emitters and photocatalysis.

Physics↗