Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Green Bonds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Green's functions for dislocations in bonded strips and related crack problems

Green's functions are derived for the plane elastostatics problem of a dislocation in a bimaterial strip. Using these fundamental solutions as kernels, various problems involving cracks in a bimaterial strip are analyzed using singular integral equations. For each problem considered, stress intensity factors are calculated for several combinations of the parameters which describe loading, geometry and material mismatch.

Ballarini, R.↗
NASA NTRS1991

Green's functions for dislocations in bonded strips and related crack problems

Green's functions are derived for the plane elastostatics problem of a dislocation in a bimaterial strip. Using these fundamental solutions as kernels, various problems involving cracks in a bimaterial strip are analyzed using singular integral equations. For each problem considered, stress intensity factors are calculated for several combinations of the parameters which describe loading, geometry and material mismatch.

Ballarini, R.↗
NASA NTRS1989

A compact planetary nebula around the hot white dwarf EGB 6/PG 0950 + 139

The remarkable central star (0950 + 139), a very hot DA/DAO white dwarf, of the planetary nebula EGB 6 is described. Follow-up observations relevant to the analyses of both the nebula and the stellar photosphere are presented. Three kinds of scenarios are discussed to account for the existence of this peculiar nebula, but none appears very promising. The first consideration is that the nebula was ejected from the white dwarf as a discret event. This hypothesis is heavily constrained by the nebular size, density, and expansion rate; by the low luminosity and radius of the star; and by the absence of evidence for variation in density-sensitive forbidden lines from 1978 to 1987. No plausible mechanism can cause the observed amount of mass to be lost directly from a white dwarf in a steady or sporadic wind, at outflow velocities orders of magnitude below the escape velocity. Final consideration is given to the possibility that the gas is lost from a close companion star, but there is no evidence that this is a close binary system.

Liebert, James↗
NASA NTRS1995

Ground-based observations of the corona in the visible and NIR spectral ranges

Since late 1993 we have been using a mirror coronagraph on Pic du Midi (PICO) to observe the solar emission corona in several spectral lines of (FE-X), (FE-XIII), and (FE-XIV). For good meteorological conditions the diffuse corona and coronal holes in between can be seen out to 1.2 solar mass for sun center. Active regions can be mapped to bond 1.5 solar mass in the green and infrared lines. Recent observations of PICO are presented.

Epple, Alexander↗
NASA NTRS2015

Body of Knowledge (BOK) for Copper Wire Bonds

Copper wire bonds have replaced gold wire bonds in the majority of commercial semiconductor devices for the latest technology nodes. Although economics has been the driving mechanism to lower semiconductor packaging costs for a savings of about 20% by replacing gold wire bonds with copper, copper also has materials property advantages over gold. When compared to gold, copper has approximately: 25% lower electrical resistivity, 30% higher thermal conductivity, 75% higher tensile strength and 45% higher modulus of elasticity. Copper wire bonds on aluminum bond pads are also more mechanically robust over time and elevated temperature due to the slower intermetallic formation rate - approximately 1/100th that of the gold to aluminum intermetallic formation rate. However, there are significant tradeoffs with copper wire bonding - copper has twice the hardness of gold which results in a narrower bonding manufacturing process window and requires that the semiconductor companies design more mechanically rigid bonding pads to prevent cratering to both the bond pad and underlying chip structure. Furthermore, copper is significantly more prone to corrosion issues. The semiconductor packaging industry has responded to this corrosion concern by creating a palladium coated copper bonding wire, which is more corrosion resistant than pure copper bonding wire. Also, the selection of the device molding compound is critical because use of environmentally friendly green compounds can result in internal CTE (Coefficient of Thermal Expansion) mismatches with the copper wire bonds that can eventually lead to device failures during thermal cycling. Despite the difficult problems associated with the changeover to copper bonding wire, there are billions of copper wire bonded devices delivered annually to customers. It is noteworthy that Texas Instruments announced in October of 2014 that they are shipping microcircuits containing copper wire bonds for safety critical automotive applications. An evaluation of copper wire bond technology for applicability to spaceflight hardware may be warranted along with concurrently compiling a comprehensive understanding of the failure mechanisms involved with copper wire bonded semiconductor devices.

Body of Knowledge (BOK)↗
NASA NTRS1997

Ultrasonic Nondestructive Characterization of Adhesive Bonds

Qualitative measurements of adhesion or binding forces can be accomplished, for example, by using the reflection coefficient of an ultrasound or by using thermal waves (Light and Kwun, 1989, Achenbach and Parikh, 1991, and Bostrom and wickham, 1991). However, a quantitative determination of binding forces is rather difficult. It has been observed that higher harmonics of the fundamental frequency are generated when an ultrasound passes through a nonlinear material. It seems that such non-linearity can be effectively used to characterize the bond strength. Several theories have been developed to model this nonlinear effect (Adler and Nagy, 1991; Achenbach and Parikh, 1991; Parikh and Achenbach, 1992; and Hirose and Kitahara, 1992; Anastasi and Roberts, 1992). Based on a microscopic description of the nonlinear interface binding force, a quantitative method was presented by Pangraz and Arnold (1994). Recently, Tang, Cheng and Achenbach (1997) made a comparison between the experimental and simulated results based on this theoretical model. A water immersion mode-converted shear wave through-transmission setup was used by Berndt and Green (1997) to analyze the nonlinear acoustic behavior of the adhesive bond. In this project, the nonlinear responses of an adhesive joint was investigated through transmission tests of ultrasonic wave and analyzed by the finite element simulations. The higher order harmonics were obtained in the tests. It is found that the amplitude of higher harmonics increases as the aging increases, especially the 3dorder harmonics. Results from the numerical simulation show that the material nonlinearity does indeed generate higher order harmonics. In particular, the elastic-perfect plastic behavior generates significant 3rd and 5th order harmonics.

Qu, Jianmin↗
NASA NTRS1984

Two new extremely hot pulsating white dwarfs

High speed photometry of the extremely hot, nearly degenerate stars PG 1707 + 427 and PG 2131 + 066 reveals that they are low-amplitude pulsating variables. Power spectral analysis shows both to be multiperiodic, with dominant periods of 7.5 and 6.4-6.9 minutes, respectively. Together with the known pulsators PG 1159 - 035 and the central star of the planetary nebula Kohoutek 1-16, these objects define a new pulsational instability strip at the hot edge of the H-R diagram. The variations of these objects closely resemble those of the much cooler pulsating ZZ Ceti DA white dwarfs; both groups are probably nonradial g-mode pulsators. Evolutionary contraction of the PG 1159 - 035 variables may lead to period changes that would be detectable in as little as 1 year. The optical and IUE spectra of the PG 1159 - 035 variables are characterized by absorption lines of C IV and other CNO ions, indicating radiative levitation of species heavier than helium. He II is also present in the spectra, but the hydrogen Balmer lines are absent. Effective temperatures near 100,000 K are required, and the He II 4686 A profiles indicate log g greater than 6. These helium-rich pulsators form the hottest known subgroup of the DO white dwarfs.

Bond, H. E.↗
NASA NTRS1990

Voyager disk-integrated photometry of Triton

Hapke's (1981) photometric model has been combined with a plane-parallel thin atmospheric haze model to describe Voyager whole-disk observations of Triton, in the violet, blue, and green wavelength bands, in order to obtain estimates of Triton's geometric albedo, phase integral, and Bond albedo. Phase angle coverage in these filters ranging from about 12 to 159 deg was obtained by combining narrow- and wide-angle camera images. An upturn in the data at the highest phase angles observed can be explained by including scattering in a thin atmospheric haze layer with optical depths systematically decreasing with wavelength from about 0.06 in the violet to 0.03 for the green filter data.

Hillier, J.↗
NASA NTRS2005

Interstellar Isomers: The Importance of Bonding Energy Differences

We present strong detections of methyl cyanide (CH3CN), vinyl cyanide (CH2CHCN), ethyl cyanide (CH3CH2CN) and cyanodiacetylene (HC4CN) molecules with the Green Bank Telescope (GBT) toward the Sgr B2(N) molecular cloud. Attempts to detect the corresponding isocyanide isomers were only successful in the case of methyl isocyanide (CH3NC) for its J(sub K) = 1(sub 0) - 0(sub 0) transition, which is the first interstellar report of this line. To determine the spatial distribution of CH3NC, we used archival Berkeley-Illinois-Maryland Association (BIMA) array data for the J(sub K) = 1(sub 0) - 0(sub 0) transitions but no emission was detected. From ab initio calculations, the bonding energy difference between the cyanide and isocyanide molecules is greater than 8500 per centimeter (greater than 12,000 K). Thus, cyanides are the more stable isomers and would likely be formed more preferentially over their isocyanide counterparts. That we detect CH3NC emission with a single antenna (Gaussian beamsize(omega(sub B))=1723 arcsec(sup 2)) but not with an interferometer (omega(sub b)=192 arcsec(sup 2)), strongly suggests that CH3NC has a widespread spatial distribution toward the Sgr B2(N) region. Other investigators have shown that CH3CN is present both in the LMH hot core of Sgr B2(N) and in the surrounding medium, while we have shown that CH3NC appears to be deficient in the LMH hot core. Thus, largescale, non-thermal processes in the surrounding medium may account for the conversion of CH3CN to CH3NC while the LMH hot core, which is dominated by thermal processes, does not produce a significant amount of CH3NC. Ice analog experiments by other investigators have shown that radiation bombardment of CH3CN can produce CH3NC, thus supporting our observations. We conclude that isomers separated by such large bonding energy differences are distributed in different interstellar environments, making the evaluation of column density ratios between such isomers irrelevant unless it can be independently shown that these species are co-spatial.

Remijan, Anthony J.↗
NASA NTRS2000

Thermal Edge-Effects Model for Automated Tape Placement of Thermoplastic Composites

Two-dimensional thermal models for automated tape placement (ATP) of thermoplastic composites neglect the diffusive heat transport that occurs between the newly placed tape and the cool substrate beside it. Such lateral transport can cool the tape edges prematurely and weaken the bond. The three-dimensional, steady state, thermal transport equation is solved by the Green's function method for a tape of finite width being placed on an infinitely wide substrate. The isotherm for the glass transition temperature on the weld interface is used to determine the distance inward from the tape edge that is prematurely cooled, called the cooling incursion Delta a. For the Langley ATP robot, Delta a = 0.4 mm for a unidirectional lay-up of PEEK/carbon fiber composite, and Delta a = 1.2 mm for an isotropic lay-up. A formula for Delta a is developed and applied to a wide range of operating conditions. A surprise finding is that Delta a need not decrease as the Peclet number Pe becomes very large, where Pe is the dimensionless ratio of inertial to diffusive heat transport. Conformable rollers that increase the consolidation length would also increase Delta a, unless other changes are made, such as proportionally increasing the material speed. To compensate for premature edge cooling, the thermal input could be extended past the tape edges by the amount Delta a. This method should help achieve uniform weld strength and crystallinity across the width of the tape.

Costen, Robert C.↗
NASA NTRS1995

Evidence for gammacerane as an indicator of water column stratification

A new route for the formation of gammacerane from tetrahymanol is proposed; in addition to dehydration and hydrogenation, sulphurisation and early C-S cleavage are shown to be important in the pathway of formation, especially in marine sediments. Evidence is twofold. First, relatively large amounts of the gammacerane skeleton are sequestered in S-rich macromolecular aggregates formed by natural sulphurisation of functionalised lipids. Selective cleavage of polysulphide linkages with MeLi/MeI led to formation of 3-methylthiogammacerane, indicating that the gammacerane skeleton is primarily bound via sulphur at position 3, consistent with the idea that tetrahymanol (or the corresponding ketone) is the precursor for gammacerane. Second, upon mild artificial maturation of two sediments using hydrous pyrolysis, gammacerane is released from S-rich macromolecular aggregates by cleavage of the relatively weak C-S bonds. The stable carbon isotopic compositions of gammacerane and lipids derived from primary producers and green sulphur bacteria in both the Miocene Gessoso-solfifera and Upper Jurassic Allgau Formations indicate that gammacerane is derived from bacterivorous ciliates which were partially feeding on green sulphur bacteria. This demonstrates that anaerobic ciliates living at or below the chemocline are important sources for gammacerane, consistent with the fact that ciliates only biosynthesize tetrahymanol if their diet is deprived of sterols. This leads to the conclusion that gammacerane is an indicator for water column stratification, which solves two current enigmas in gammacerane geochemistry. Firstly, it explains why gammacerane is often found in sediments deposited under hypersaline conditions but is not necessarily restricted to this type of deposits. Secondly, it explains why lacustrine deposits may contain abundant gammacerane since most lakes in the temperate climatic zones are stratified during summer.

NASA Discipline Exobiology↗
NASA NTRS1985

Nonlinear adhesive behavior effects in a cracked orthotropic sheet stiffened by a semi-infinite orthotropic sheet

The stress-intensity factors are determined for a cracked orthotropic sheet adhesively bonded to an orthotropic stringer where the adhesive layer is modeled with a nonlinear stress-strain curve. By the use of Green's functions and the complex variable theory of orthotropic elasticity, a set of integral equations is obtained. The integral equations are replaced by an equivalent set of algebraic equations, which are solved to obtain the shear stress distribution in the adhesive layer, with which the crack-tip stress-intensity factors are found. When the adhesive was modeled with a nonlinear stress-strain curve, the peak shear stresses in the adhesive were considerably reduced in comparison to the solution for the linear elastic adhesive. This resulted in increases in the stress-intensity factors for the nonlinear adhesive solution compared to the linear adhesive solution. The nonlinear adhesive has no significant effect on the stress-intensity factor unless the near crack tip is beneath the stringer. It is assumed that the adhesive bond remains intact and it is predicted that onset of adhesive failure occurs at decreasing levels of applied stress as the crack propagates beneath the stringer.

Bigelow, C. A.↗
NASA NTRS1986

Nonlinear adhesive behavior effects in a cracked orthotropic sheet stiffened by a semi-infinite orthotropic sheet

The stress-intensity factors are determined for a cracked orthotropic sheet adhesively bonded to an orthotropic stringer where the adhesive layer is modeled with a nonlinear stress-strain curve. By the use of Green's functions and the complex variable theory of orthotropic elasticity, a set of integral equations is obtained. The integral equations are replaced by an equivalent set of algebraic equations, which are solved to obtain the shear stress distribution in the adhesive layer, with which the crack-tip stress-intensity factors are found. When the adhesive was modeled with a nonlinear stress-strain curve, the peak shear stresses in the adhesive were considerably reduced in comparison to the solution for the linear elastic adhesive. This resulted in increases in the stress-intensity factors for the nonlinear adhesive solution compared to the linear adhesive solution. The nonlinear adhesive has no significant effect on the stress-intensity factor unless the near crack tip is beneath the stringer. It is assumed that the adhesive bond remains intact and it is predicted that onset of adhesive failure occurs at decreasing levels of applied stress as the crack propagates beneath the stringer.

Bigelow, C. A.↗
NASA NTRS1981

Theoretical interpretation of photometric properties of the Martian surface and atmosphere

Earth-based UBV photometry, photographs from the Lowell Observatory, and Mariner 9 data are combined with a new radiative transfer theory to derive physical parameters for the Martian surface and atmosphere, both before and during the 1971 dust storm. Storm dust particles had a single scattering albedo of 0.84 plus or minus 0.02 and an asymmetry factor of 0.35 plus or minus 0.10 in green (V) light. The geometric albedo of Mars was 0.15 and the phase integral 1.83, yielding 0.27 for the Bond albedo. The mean optical thickness of the 'clear' atmosphere averaged over the whole planet was 0.15 plus or minus 0.05 and was not dependent on wavelength. Geometric albedos for the surface are 0.25 (light areas) and 0.17 (dark areas) in V, 0.095 in B, and 0.060 in U. The soil particles are moderately backward scattering with an asymmetry factor of minus 0.20, and therefore rather opaque. The mean surface roughness is 0.57, representing the depth/radius ratio of an average hole, and being only one-half as large as values typical for the moon and asteroids.

Lumme, K.↗
NASA NTRS1999

Nondestructive Determination of Bond Strength

Current projects include loading adhesive bond in shear in MTS machine, ultrasonic tests with shear waves, shear-fatigue adhesive bonding, and use of ultrasound to detect onset of nonlinearity.

Berndt, Tobias P.↗
NASA NTRS2016

Fabrication of High Thermal Conductivity NARloy-Z-Diamond Composite Combustion Chamber Liner for Advanced Rocket Engines

NARloy-Z alloy (Cu-3 percent, Ag-0.5 percent, Zr) is a state of the art alloy currently used for fabricating rocket engine combustion chamber liners. Research conducted at NASA-MSFC and Penn State – Applied Research Laboratory has shown that thermal conductivity of NARloy-Z can be increased significantly by adding diamonds to form a composite (NARloy-Z-D). NARloy-Z-D is also lighter than NARloy-Z. These attributes make this advanced composite material an ideal candidate for fabricating combustion chamber liner for an advanced rocket engine. Increased thermal conductivity will directly translate into increased turbopump power and increased chamber pressure for improved thrust and specific impulse. This paper describes the process development for fabricating a subscale high thermal conductivity NARloy-Z-D combustion chamber liner using Field Assisted Sintering Technology (FAST). The FAST process uses a mixture of NARloy-Z and diamond powders which is sintered under pressure at elevated temperatures. Several challenges were encountered, i.e., segregation of diamonds, machining the super hard NARloy-Z-D composite, net shape fabrication and nondestructive examination. The paper describes how these challenges were addressed. Diamonds coated with copper (CuD) appear to give the best results. A near net shape subscale combustion chamber liner is being fabricated by diffusion bonding cylindrical rings of NARloy-Z-CuD using the FAST process.

Bhat, Biliyar N.↗