Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GaBi”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Quantum anomalous Hall insulator phases in Fe-doped GaBi honeycomb

We discuss electronic and magnetic properties of the Fe-doped GaBi honeycomb using first principles calculations. Our analysis shows that the pristine GaBi honeycomb transitions from being a two-dimensional quantum spin Hall (QSH) insulator to a quantum anomalous Hall (QAH) insulator when it is doped with one Fe atom in a 4 × 4 GaBi honeycomb. Additionally, the QAH phase in Fe-doped GaBi is found to be robust in that it maintains its Chern number (C = 1) under fairly large strains (~ 4%) and supports a gap as large as 112 meV at 2.21% strain. The QAH phase is also retained when the Fe-doped GaBi is placed on a CdTe substrate, suggesting that Fe-doped GaBi films could be useful for spintronics applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Materials Data on GaBi by Materials Project

GaBi is Zincblende, Sphalerite structured and crystallizes in the cubic F-43m space group. The structure is three-dimensional. Ga is bonded to four equivalent Bi atoms to form corner-sharing GaBi4 tetrahedra. All Ga–Bi bond lengths are 2.80 Å. Bi is bonded to four equivalent Ga atoms to form corner-sharing BiGa4 tetrahedra.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Pressure dependence of the electrical properties of GaBi solidified in low gravity

Immiscible GaBi alloys were solidified during free fall in the NASA Marshall Space Flight Center drop tower, which provides about 4.5 seconds of low gravity. The electrical resistivity and magnetic susceptibility were measured as a function of pressure (up to 18 kbar) and temperature (300 K to 4.2 K) of drop tower (DT) and ground control (GC) samples prepared under identical conditions, except for gravity. At ambient pressure the electrical resistance of the DT sample exhibits a broad maximum at 100 K, while that of GC sample decreases rapidly as temperature decreases. Both DT and GC samples become superconducting at 7.7 K. However, a minor second superconducting phase with a transition temperature at 8.3 K is observed only in the DT samples.

Wu, M. K.↗
DOE OSTI2023

Cross-database comparisons on the greenhouse gas emissions, water consumption, and fossil-fuel use of plastic resin production and their post-use phase impacts

Resin production and post-use pathways have cross-database discrepancies due to different temporal/geographic representation, technologies, and assumptions. These differences can distort comparisons across alternatives and confound efforts to establish standards based on the plastics’ life-cycle impacts. Thus, this study quantifies the degree and identifies the sources of cross-database discrepancies across four LCA databases (GREET, USLCI, Ecoinvent, and GaBi) for five resin production pathways and three post-use phases. For resin production pathways, all resins showed significant cross-database discrepancy in their global warming impacts: the degree of discrepancy was significant to recommend a consistent choice of database to users any LCA comparisons across different products. For post-use phases, landfill datasets had relatively lower degree of cross-database discrepancy than incineration and mechanical recycling. Different metadata characteristics were the sources of some cross-database discrepancies while other parts could be explained by the original differences in the life-cycle inventory sourced from different producers and plants.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

OWD.2 TAG Expression

During the transformation of wild-type (WT) Arabidopsis thaliana, a T-DNA containing OLEOSIN-GFP (OLE1-GFP) was inserted by happenstance within the GBSS1 gene, resulting in significant reduction in amylose and increase in leaf oil content in the transgenic line (OG). The synergistic effect on oil accumulation of combining gbss1 with the expression of OLE1-GFP was confirmed by transforming an independent gbss1 mutant (GABI_914G01) with OLE1-GFP. The resulting OLE1-GFP/gbss1 transgenic lines showed higher leaf oil content than the individual OLE1-GFP/WT or single gbss1 mutant lines. Further stacking of the lipogenic factors WRINKLED1, Diacylglycerol O-Acyltransferase (DGAT1), and Cys-OLEOSIN1 (an engineered sesame OLEOSIN1) in OG significantly elevated its oil content in mature leaves to 2.3% of dry weight, which is 15 times higher than that in WT Arabidopsis. Inducible expression of the same lipogenic factors was shown to be an effective strategy for triacylglycerol (TAG) accumulation without incurring growth, development, and yield penalties.

Biomass Analytics↗
DOE OSTI2021

Ectopic Expression of OLEOSIN 1 and Inactivation of GBSS1 Have a Synergistic Effect on Oil Accumulation in Plant Leaves

During the transformation of wild-type (WT) Arabidopsis thaliana, a T-DNA containing OLEOSIN-GFP (OLE1-GFP) was inserted by happenstance within the GBSS1 gene, resulting in significant reduction in amylose and increase in leaf oil content in the transgenic line (OG). The synergistic effect on oil accumulation of combining gbss1 with the expression of OLE1-GFP was confirmed by transforming an independent gbss1 mutant (GABI_914G01) with OLE1-GFP. The resulting OLE1-GFP/gbss1 transgenic lines showed higher leaf oil content than the individual OLE1-GFP/WT or single gbss1 mutant lines. Further stacking of the lipogenic factors WRINKLED1, Diacylglycerol O-Acyltransferase (DGAT1), and Cys-OLEOSIN1 (an engineered sesame OLEOSIN1) in OG significantly elevated its oil content in mature leaves to 2.3% of dry weight, which is 15 times higher than that in WT Arabidopsis. Inducible expression of the same lipogenic factors was shown to be an effective strategy for triacylglycerol (TAG) accumulation without incurring growth, development, and yield penalties.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1987

Study of the production of some superconducting and magnetic materials by solidification in the drop tube and drop tower

A systematic study on the relationship between the microstructure and physical properties of several superconducting materials prepared by solidification in low gravity was conducted. Further study of the materials, such as the applications of hydrostatic pressure which is known to be an effective mean to vary the electronic structure of materials, in conjunction with the detailed microstructure analysis of the samples was also performed to better understand the low gravity effects on the enhancement of the electronic properties. Results of the studies on the directionally solidified AlInSn alloys processed in the KC-135 aircraft and immiscible GaBi alloy prepared during free fall in the Marshall Space Flight Center Drop Tower are presented.

Wu, M. K.↗
NASA NTRS1988

Structural properties of bismuth-bearing semiconductor alloys

The structural properties of bismuth-bearing III-V semiconductor alloys InPBi, InAsBi, and InSbBi were studied theoretically. Bond energies, bond lengths, and strain coefficients were calculated for pure AlBi, GaBi, and InBi compounds and their alloys, and predictions were made for the mixing enthalpies, miscibility gaps, and critical metastable-to-stable material transition temperatures. Miscibility calculations indicate that InSbBi will be the most miscible, and the InPBi will be the the most difficult to mix. However, calculations of the hardness of the Bi compounds indicate that, once formed, the InPBi alloy will be harder than the other Bi alloys and substantially harder than the currently favored narrow-gap semiconductor HgCdTe.

Berding, M. A.↗
DOE OSTI2020

Assessing mean climate change signals in the global CORDEX-CORE ensemble

The new Coordinated Output for Regional Evaluations (CORDEX-CORE) ensemble provides high-resolution, consistent regional climate change projections for the major inhabited areas of the world. It serves as a solid scientific basis for further research related to vulnerability, impact, adaptation and climate services in addition to existing CORDEX simulations. The aim of this study is to investigate and document the climate change information provided by the CORDEX-CORE simulation ensemble, as a part of the World Climate Research Programme (WCRP) CORDEX community. An overview of the annual and monthly mean climate change information in selected regions in different CORDEX domains is presented for temperature and precipitation, providing the foundation for detailed follow-up studies and applications. Initially, two regional climate models (RCMs), REMO and RegCM were used to downscale global climate model output. The driving simulations by AR5 global climate models (AR5-GCMs) were selected to cover the spread of high, medium, and low equilibrium climate sensitivity at a global scale. The CORDEX-CORE ensemble has doubled the spatial resolution compared to the previously existing CORDEX simulations in most of the regions (25 $\,\mathrm {km}$ (0.22 $^{\circ }$ /jats:inline-formula>) versus 50 $\,\mathrm {km}$ (0.44 $^{\circ }$ )) leading to a potentially improved representation of, e.g., physical processes in the RCMs. The analysis focuses on changes in the IPCC physical climate reference regions. The results show a general reasonable representation of the spread of the temperature and precipitation climate change signals of the AR5-GCMs by the CORDEX-CORE simulations in the investigated regions in all CORDEX domains by mostly covering the AR5 interquartile range of climate change signals. The simulated CORDEX-CORE monthly climate change signals mostly follow the AR5-GCMs, although for specific regions they show a different change in the course of the year compared to the AR5-GCMs, especially for RCP8.5, which needs to be investigated further in region specific process studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Century of Reforestation Reduced Anthropogenic Warming in the Eastern United States

Abstract Restoring and preserving the world's forests are promising natural pathways to mitigate some aspects of climate change. In addition to regulating atmospheric carbon dioxide concentrations, forests modify surface and near‐surface air temperatures through biophysical processes. In the eastern United States (EUS), widespread reforestation during the 20th century coincided with an anomalous lack of warming, raising questions about reforestation's contribution to local cooling and climate mitigation. Using new cross‐scale approaches and multiple independent sources of data, we uncovered links between reforestation and the response of both surface and air temperature in the EUS. Ground‐ and satellite‐based observations showed that EUS forests cool the land surface by 1–2°C annually compared to nearby grasslands and croplands, with the strongest cooling effect during midday in the growing season, when cooling is 2–5°C. Young forests (20–40 years) have the strongest cooling effect on surface temperature. Surface cooling extends to the near‐surface air, with forests reducing midday air temperature by up to 1°C compared to nearby non‐forests. Analyses of historical land cover and air temperature trends showed that the cooling benefits of reforestation extend across the landscape. Locations surrounded by reforestation were up to 1°C cooler than neighboring locations that did not undergo land cover change, and areas dominated by regrowing forests were associated with cooling temperature trends in much of the EUS. Our work indicates reforestation contributed to the historically slow pace of warming in the EUS, underscoring reforestation's potential as a local climate adaptation strategy in temperate regions.

Environmental Sciences & Ecology↗
DOE OSTI2021

Discovery of widespread transcription initiation at microsatellites predictable by sequence-based deep neural network

Using the Cap Analysis of Gene Expression (CAGE) technology, the FANTOM5 consortium provided one of the most comprehensive maps of transcription start sites (TSSs) in several species. Strikingly, ~72% of them could not be assigned to a specific gene and initiate at unconventional regions, outside promoters or enhancers. Here, we probe these unassigned TSSs and show that, in all species studied, a significant fraction of CAGE peaks initiate at microsatellites, also called short tandem repeats (STRs). To confirm this transcription, we develop Cap Trap RNA-seq, a technology which combines cap trapping and long read MinION sequencing. We train sequence-based deep learning models able to predict CAGE signal at STRs with high accuracy. These models unveil the importance of STR surrounding sequences not only to distinguish STR classes, but also to predict the level of transcription initiation. Importantly, genetic variants linked to human diseases are preferentially found at STRs with high transcription initiation level, supporting the biological and clinical relevance of transcription initiation at STRs. Together, our results extend the repertoire of non-coding transcription associated with DNA tandem repeats and complexify STR polymorphism.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Single-cell and spatial omics in plants: from cellular atlases to regulatory mechanisms

Single-cell RNA sequencing (scRNA-seq) has transformed transcriptomic studies by enabling gene expression profiling at the resolution of individual cells within and across a broad range of tissue types, revealing cellular heterogeneity that is obscured in bulk tissue transcriptomes. Over the past decade, improvements in microfluidics and library preparation have drastically increased throughput, allowing tens of thousands of cells to be assayed in a single experiment. Although initially developed in animal systems, scRNA-seq has rapidly emerged as a powerful and widely adopted approach in plant biology. Beyond transcriptomics, the integration of single-cell data with chromatin accessibility, proteomics, metabolomics, and spatial omics is enabling a system-level understanding of plant gene regulation and cellular organization. Network-based analytical frameworks further support the reconstruction of gene regulatory networks and the interpretation of complex single-cell data. In this review, we summarize the current technological landscape of plant single-cell studies, discuss key experimental and analytical challenges, and review emerging strategies for validating single-cell discoveries. We also discuss future directions in applying single-cell technologies to woody perennials plants and bioenergy-relevant crops, emphasizing their potential to accelerate the discovery of cell type-specific regulatory mechanisms underlying growth, stress resilience, and biomass production.

Li, Miaomiao [ORNL] (ORCID:0000000321326168)↗
DOE OSTI2022

The CORDEX-CORE EXP-I Initiative: Description and Highlight Results from the Initial Analysis

Here we describe the first effort within the Coordinated Regional Climate Downscaling Experiment–Coordinated Output for Regional Evaluation, or CORDEX-CORE EXP-I. It consists of a set of twenty-first-century projections with two regional climate models (RCMs) downscaling three global climate model (GCM) simulations from the CMIP5 program, for two greenhouse gas concentration pathways (RCP8.5 and RCP2.6), over nine CORDEX domains at ~25-km grid spacing. Illustrative examples from the initial analysis of this ensemble are presented, covering a wide range of topics, such as added value of RCM nesting, extreme indices, tropical and extratropical storms, monsoons, ENSO, severe storm environments, emergence of change signals, and energy production. They show that the CORDEX-CORE EXP-I ensemble can provide downscaled information of unprecedented comprehensiveness to increase understanding of processes relevant for regional climate change and impacts, and to assess the added value of RCMs. The CORDEX-CORE EXP-I dataset, which will be incrementally augmented with new simulations, is intended to be a public resource available to the scientific and end-user communities for application to process studies, impacts on different socioeconomic sectors, and climate service activities. The future of the CORDEX-CORE initiative is also discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Bifacial Photovoltaic Modules and Systems: Experience and Results from International Research and Pilot Applications

Within the framework of IEA PVPS, Task 13 aims to provide support to market actors working to improve the operation, the reliability and the quality of PV components and systems. Operational data from PV systems in different climate zones compiled within the project will help provide the basis for estimates of the current situation regarding PV reliability and performance. The general setting of Task 13 provides a common platform to summarize and report on technical aspects affecting the quality, performance, reliability and lifetime of PV systems in a wide variety of environments and applications. By working together across national boundaries we can all take advantage of research and experience from each member country and combine and integrate this knowledge into valuable summaries of best practices and methods for ensuring PV systems perform at their optimum and continue to provide competitive return on investment. Task 13 has so far managed to create the right framework for the calculations of various parameters that can give an indication of the quality of PV components and systems. The framework is now there and can be used by the industry who has expressed appreciation towards the results included in the high-quality reports. The IEA PVPS countries participating in Task 13 are Australia, Austria, Belgium, Canada, Chile, China, Denmark, Finland, France, Germany, Israel, Italy, Japan, the Netherlands, Norway, Spain, Sweden, Switzerland, Thailand, and the United States of America.

14 SOLAR ENERGY↗
DOE OSTI2025

Development of ~25% Efficient Double Side Screen Printed Poly-Si/SiO x Passivated Contact Solar Cells

This program aims to overcome these challenges and develop high-efficiency (24-25%) double-side (DS) TOPCon solar cells by maximizing passivation on both sides while mitigating light absorption losses. To achieve this, the program will implement either thin (≤ 20 nm) homogeneous n-TOPCon on the entire front surface or selective area thick (≥ 100 nm) n-TOPCon only underneath the front metal contact with ~90% field region composed of dielectric passivated textured n-Si in between the poly-Si/metal grid. The rear side will feature ~250 nm-thick full-area planar p-TOPCon, which functions as the rear junction. Recombination and parasitic absorption losses in the front and rear TOPCon layers will be minimized by tailoring their doping profiles and thickness. Additionally, the device performance will be further enhanced through the optimization of bulk parameters, including the carrier lifetime, resistivity, and thickness of the n-type Si absorber. Finally, advanced metallization techniques, such as fine-line printing, and floating busbar or busbar-less designs, will be employed to reduce recombination, resistive, and optical losses. The program started with the development of a technology roadmap for DS-TOPCon cells to achieve target efficiency.

14 SOLAR ENERGY↗
DOE OSTI2025

The Detection and Attribution Model Intercomparison Project (DAMIP v2.0) contribution to CMIP7

The first version of the Detection and Attribution Model Intercomparison Project (DAMIP v1.0) coordinated key simulations exploring the role of individual forcings in past, current and future climate as part of the Coupled Model Intercomparison Project, Phase 6 (CMIP6). The simulations have been used extensively in the literature for detection and attribution of long-term changes, constraining projections of climate change, attributing extreme events and understanding drivers of past and future simulated climate changes. Attribution studies using DAMIP v1.0 simulations underpinned prominent assessments of human-induced warming in the Intergovernmental Panel on Climate Change (IPCC) Sixth Assessment Report. Here, we describe the set of DAMIP v2.0 simulations, proposed for the next phase of CMIP, CMIP7. Detection and attribution studies rely on pre-industrial control simulations and historical simulations, which will be part of the Diagnostic, Evaluation and Characterization of Klima (DECK) set of simulations for CMIP7. In addition, we identify the three highest-priority single-forcing experiments for CMIP7 to be run as “Assessment Fast Track” simulations in support of the Seventh Assessment Report of the IPCC: simulations with natural forcings only, anthropogenic well-mixed greenhouse gases only and anthropogenic aerosols only. Beyond this, the DAMIP v2.0 experimental design includes full-column ozone-only simulations and land-use-only simulations, such that the set of individual forcing experiments, when these are considered together, represents the full set of historical forcings. While concentration-driven simulations are prioritised for attribution, emissions-driven versions of the DAMIP experiments are also proposed to support understanding of the influence of carbon-cycle feedbacks on the simulated responses to individual forcings.

Gillett, Nathan P. [Environment and Climate Change↗