Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GERMANIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Characterization of hydrogenated amorphous germanium compounds obtained by x-ray chemical vapor deposition of germane: Effect of the irradiation dose on optical parameters and structural order

Hydrogenated nonstoichiometric germanium materials have been produced by x-ray activated-chemical vapor deposition from germane. The reactions pattern leading to the solid products has been investigated. The dose effect on the composition, the local bonding configuration, and structural characteristics of the deposited solids has been studied using infrared absorption and Raman spectroscopy and has been discussed. Optical parameters have been also determined from ultraviolet-visible spectrophotometry data. The results show that the solids are formed by a random bound network of germanium and hydrogen atoms with a-Ge zones dispersed in the matrix. The Raman results and optical parameters indicate that the structural order, both short-range and intermediate-range, decreases with increasing irradiation time. This behavior suggests that the solid is involved in the reactions leading to the final product and indicates that the formation of amorphous germanium zones is stimulated by postdeposition irradiation, which induces compositional and structural modifications.

36 MATERIALS SCIENCE↗

EVALUATION OF THE IMPACT OF THE DEFENSE WASTE PROCESSING FACILITY (DWPF) LABORATORY GERMANIUM OXIDE USE ON RECYCLE TRANSFERS TO THE H-TANK FARM

When processing High Level Waste (HLW) glass, the Defense Waste Processing Facility (DWPF) cannot wait until the melt or waste glass has been made to assess its acceptability, since by then no further changes to the glass composition and acceptability are possible. Therefore, the acceptability decision is made on the upstream feed stream, rather than on the downstream melt or glass product. This strategy is known as 'feed forward statistical process control.' The DWPF depends on chemical analysis of the feed streams from the Sludge Receipt and Adjustment Tank (SRAT) and the Slurry Mix Evaporator (SME) where the frit plus adjusted sludge from the SRAT are mixed. The SME is the last vessel in which any chemical adjustments or frit additions can be made. Once the analyses of the SME product are deemed acceptable, the SME product is transferred to the Melter Feed Tank (MFT) and onto the melter. The SRAT and SME analyses have been analyzed by the DWPF laboratory using a 'Cold Chemical' method but this dissolution did not adequately dissolve all the elemental components. A new dissolution method which fuses the SRAT or SME product with cesium nitrate (CsNO{sub 3}), germanium (IV) oxide (GeO{sub 2}) and cesium carbonate (Cs{sub 2}CO{sub 3}) into a cesium germanate glass at 1050 C in platinum crucibles has been developed. Once the germanium glass is formed in that fusion, it is readily dissolved by concentrated nitric acid (about 1M) to solubilize all the elements in the SRAT and/or SME product for elemental analysis. When the chemical analyses are completed the acidic cesium-germanate solution is transferred from the DWPF analytic laboratory to the Recycle Collection Tank (RCT) where the pH is increased to {approx}12 M to be released back to the tank farm and the 2H evaporator. Therefore, about 2.5 kg/yr of GeO{sub 2}/year will be diluted into 1.4 million gallons of recycle. This 2.5 kg/yr of GeO{sub 2} may increase to 4 kg/yr when improvements are implemented to attain an annual canister production goal of 400 canisters. Since no Waste Acceptance Criteria (WAC) exists for germanium in the Tank Farm, the Effluent Treatment Project, or the Saltstone Production Facility, DWPF has requested an evaluation of the fate of the germanium in the caustic environment of the RCT, the 2H evaporator, and the tank farm. This report evaluates the effect of the addition of germanium to the tank farm based on: (1) the large dilution of Ge in the RCT and tank farm; (2) the solubility of germanium in caustic solutions (pH 12-13); (3) the potential of germanium to precipitate as germanium sodalites in the 2H Evaporator; and (4) the potential of germanium compounds to precipitate in the evaporator feed tank. This study concludes that the impacts of transferring up to 4 kg/yr germanium to the RCT (and subsequently the 2H evaporator feed tank and the 2H evaporator) results in <2 ppm per year (1.834 mg/L) which is the maximum instantaneous concentration expected from DWPF. This concentration is insignificant as most sodium germanates are soluble at the high pH of the feed tank and evaporator solutions. Even if sodium aluminosilicates form in the 2H evaporator, the Ge will likely substitute for some small amount of the Si in these structures and will be insignificant. It is recommended that the DWPF continue with their strategy to add germanium as a laboratory chemical to Attachment 8.2 of the DWPF Waste Compliance Plan (WCP).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Oligogermanes as molecular precursors for germanium(0) nanoparticles: Size control and size-dependent fluorescence

Graphical abstract: Catenated germanium compounds are employed as molecular precursors for germanium(0) nanoparticles. The size of the nanoparticles, and their fluorescence spectra, depend on the number of catenated germanium atoms present in the precursor. - Highlights: • We have used oligogermanes for the size-specific synthesis of germanium(0) nanoparticles. • The size of the nanomaterials obtained depends directly on the degree of catenation present in the oligogermane precursor. • The nanoparticles are shown to exhibit size-dependent fluorescence. • Oligogermanes will function as useful precursors for the synthesis of a variety of nanomaterials. - Abstract: Germanium nanoparticles were synthesized in solution from novel oligogermane molecular precursors. The size of the nanoparticles obtained is directly related to the number of catenated germanium atoms present in the oligogermane precursor and the nanoparticles exhibit size-dependent fluorescence. The germanium nanoparticles were also characterized by TEM, powder XRD, FTIR, EDS and XPS methods. This method appears to be a promising new route for the synthesis of germanium nanoparticles since the size of the materials obtained can be controlled by the choice of the oligogermane used as the precursor.

36 MATERIALS SCIENCE↗

Capacitance scaling law for diatomic molecules and prediction of their electron detachment energies

The variation or 'scaling' of the quantum capacitances is explored for 45 diatomic molecules as a function of their dimensions. Scaling trends in the capacitances of these diatomic molecules dictate an 'atoms-in-molecules' view of their valence energetics. That is, experimentally derived quantum capacitances for both homonuclear and heteronuclear diatomic molecules scale linearly with the average of the mean radii for the outermost orbitals of their component atoms. This is in accord with Maxwell's law for classical capacitors formed from two conducting atom-sized spheres in tangential contact. However, the scaling behavior for the molecules has some nonclassical features. Notably, the quantum capacitances extrapolate to nonzero values at zero dimensions. Radius-capacitance points of the homonuclear diatomics lie primarily along five scaling lines, with each determined by points for molecules composed of atoms with the same atomic symmetry (i.e., atoms from the same column in the periodic table). Five scaling lines for heteronuclear diatomics each are determined by points for molecules of the same or similar molecular symmetries. The molecules' quantum capacitances are calculated from their ionization potentials (IPs) and electron affinities (EAs). Thus, equations or laws for the scaling lines impose mutual consistency conditions among these electron detachment energies for different diatomics of similar symmetries. By taking advantage of this, the linear quantum capacitance scaling laws and ab initio atomic mean radii are used to predict IPs for two diatomics with known EAs (Ga{sub 2} and SeO), but for which there is no standard value of the IP. Similarly, the laws are used to predict EAs that were unknown or uncertain for several diatomics (Li{sub 2}, LiF, CSe, PN, BF, BCl, SiO, GeO, NCl, CaO, SrO, and BaO) with known IPs.

36 MATERIALS SCIENCE↗

Mechanisms of edge-dislocation formation in strained films of zinc blende and diamond cubic semiconductors epitaxially grown on (001)-oriented substrates

Ninety degree edge misfit dislocations (MDs) are 'sessile' dislocations; such dislocations, however, were found in large amounts in relaxed films. The commonly accepted formation mechanism of such dislocations is an interaction of two complementary 60 deg. dislocations with appropriate Burger's vectors, for example: a/2[101] + a/2 [011] = a/2 [110]. In the present study, four possible types of interaction were analyzed: (i) random meeting of two complementary MDs; (ii) crossing of two complementary 60 deg. MDs in the vicinity of film-substrate interface in systems grown on substrates misoriented from exact (001) orientation; (iii) formation of edge MDs during cross-slipping of a secondary MD; and (iv) induced nucleation of a secondary complementary 60 deg. MD. Examples of discussed interactions are given. Contrary to the widespread opinion that edge MDs in GeSi and InGaAs films grown by MBE on Si and GaAs substrates predominantly form under elastic strains greater than 2% and at the final stage of plastic relaxation, in the present study, we show that such dislocations may also form at an early stage of plastic relaxation in films with less-than-1% lattice misfit with substrate. A necessary condition for that is a sufficient amount of 60 deg. dislocations available in the system by the moment the strained film starts growing. Dislocations (60 deg. ) can be introduced into the system using a preliminarily grown, partially or fully relaxed buffer layer. This layer serves as a source of threading dislocations for the next growing layer that favor the formation of paired complementary MDs and their 'reagents', edge MDs, at the interface with growing film.

36 MATERIALS SCIENCE↗

Strain characterization of fin-shaped field effect transistors with SiGe stressors using nanobeam electron diffraction

This study undertook strain analysis on fin-shaped field effect transistor structures with epitaxial Si{sub 1−x}Ge{sub x} stressors, using nano-beam electron diffraction and finite elements method. Combining the two methods disclosed dynamic strain distribution in the source/drain and channel region of the fin structure, and the effects of dimensional factors such as the stressor thickness and fin width, offering valuable information for device design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intermixing between HfO{sub 2} and GeO{sub 2} films deposited on Ge(001) and Si(001): Role of the substrate

Thermally driven atomic transport in HfO{sub 2}/GeO{sub 2}/substrate structures on Ge(001) and Si(001) was investigated in N{sub 2} ambient as function of annealing temperature and time. As-deposited stacks showed no detectable intermixing and no instabilities were observed on Si. On Ge, loss of O and Ge was detected in all annealed samples, presumably due to evolution of GeO from the GeO{sub 2}/Ge interface. In addition, hafnium germanate is formed at 600 deg. C. Our data indicate that at 500 deg. C and above HfO{sub 2}/GeO{sub 2} stacks are stable only if isolated from the Ge substrate.

36 MATERIALS SCIENCE↗

Enhanced Ge/Si(001) island areal density and self-organization due to P predeposition

The predeposition of P, with coverages {theta}{sub P} ranging from 0 to 1 ML, on Si(001) significantly increases both the areal density and spatial self-organization of Ge islands grown by gas-source molecular beam epitaxy from hydride precursors. The Ge island density {rho}{sub Ge} initially increases with {theta}{sub P}, reaching a maximum of 1.4 x 10{sup 10} cm{sup -2} at {theta}{sub P} = 0.7 ML, a factor of four times higher than on bare Si(001) under the same deposition conditions, before decreasing at higher P coverages. The increase in {rho}{sub Ge}({theta}{sub P}) is due to a corresponding decrease in Ge adatom mean free paths resulting from passivation of surface dangling bonds by adsorbed pentavalent P atoms which, in addition, leads to surface roughening and, therefore, higher Ge coverages at constant Ge{sub 2}H{sub 6} dose. As {theta}{sub P} (and hence, {rho}{sub Ge}) increases, so does the degree of Ge island ordering along <100> directions due to the anisotropic strain field surrounding individual islands. Similar results are obtained for Ge island growth on P-doped Si(001) layers where strong P surface segregation provides partial monolayer coverage prior to Ge deposition.

36 MATERIALS SCIENCE↗

Confocal Raman microscopy of self-assembled GeSi/Si(001) Islands

The method of confocal Raman microscopy is used for the first time to study the spatial distribution of elemental composition and elastic strains in self-assembled GexSi{sub 1-x}/Si(001) islands grown by the method of sublimation molecular-beam epitaxy in the GeH{sub 4} ambient. The lines related to vibrational modes Si-Si, Ge-Ge, and Si-Ge are identified in the Raman spectra measured in the regions with dimensions <100 nm on the surface of the samples. The spatial distribution of the Ge atomic fraction x in the Ge{sub x}Si{sub 1-x} alloy and of the elastic strain {epsilon} (averaged in depth over the island layer) have been calculated from the maps of the Raman shifts of the corresponding lines over the sample surface. The dependences of x and {epsilon} on the islands' growth temperature and on the nominal thickness of the deposited Ge layer have been studied.

36 MATERIALS SCIENCE↗

Frequency upconversion luminescence from Yb{sup +3}-Tm{sup +3} codoped PbO-GeO{sub 2} glasses containing silver nanoparticles

Infrared-to-visible and infrared-to-infrared frequency upconversion processes in Yb{sup 3+}-Tm{sup 3+} doped PbO-GeO{sub 2} glasses containing silver nanoparticles (NPs) were investigated. The experiments were performed by exciting the samples with a diode laser operating at 980 nm (in resonance with the Yb{sup 3+} transition {sup 2}F{sub 7/2}->{sup 2}F{sub 5/2}) and observing the photoluminescence (PL) in the visible and infrared regions due to energy transfer from Yb{sup 3+} to Tm{sup 3+} ions followed by excited state absorption in the Tm{sup 3+} ions. The intensified local field in the vicinity of the metallic NPs contributes for enhancement in the PL intensity at 480 nm (Tm{sup 3+}:{sup 1}G{sub 4}->{sup 3}H{sub 6}) and at 800 nm (Tm{sup 3+}:{sup 3}H{sub 4}->{sup 3}H{sub 6}).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photoinduced and thermal reactions involving hydrogen in high-germania-core optical fibres

We report a Raman scattering study of photoinduced and thermal reactions between H{sub 2} and germanosilicate optical fibres with 22 mol % and 97 mol % GeO{sub 2} in the core (F1 and F2, respectively) after H{sub 2} loading at 150 MPa (1500 atm). The mechanisms of photoreactions are investigated in a wide range of incident laser wavelengths (244, 333, 354, 361 and 514 nm). Thermal reactions are studied at 500 {sup 0}C. The results indicate that the main mechanism behind the formation of hydrogen-containing defects with Raman bands at 700, 750, 2190, 3600 and 3680 cm{sup -1} involves {identical_to}Ge-O-Ge{identical_to} or {identical_to}Ge-O-Si{identical_to} bond breaking and formation of hydride and hydroxyl species: =GeH{sub 2} (700, 750 cm{sup -1}), {identical_to}Ge-H (2190 cm{sup -1}), {identical_to}GeO-H (3600 cm{sup -1}) and {identical_to}SiO-H (3680 cm{sup -1}). The key features of the reactions in the F1 and F2 fibres are analysed. In particular, photoinduced reactions give {identical_to}Si-OH groups only in the F1 fibres, whereas the formation of germanium nanoclusters at a relatively low temperature ({approx}500 {sup 0}C) or {identical_to}GeO-H and {identical_to}Ge-H defects under 514-nm irradiation has only been observed in the F2 fibres. (optical fibres)

36 MATERIALS SCIENCE↗

Energy upconversion in holmium doped lead-germano-tellurite glass

Holmium doped lead-germano-tellurite glass was prepared by the melt quenching technique. The Judd-Ofelt intensity parameters were estimated as {Omega}{sub 2}=7.6x10{sup -20}, {Omega}{sub 4}=12.9x10{sup -20}, and {Omega}{sub 6}=2.5x10{sup -20} cm{sup 2}. Radiative transition probabilities and lifetimes were also determined for some of the levels. Room temperature upconversion emissions have been observed from Ho{sup 3+} at 497 nm under 532 nm laser excitation, and at 557 and 668 nm under 762 nm laser excitation. The upconversion emission mechanisms were found to be due to a step wise excitation process. Upconversion emission intensity enhanced in a heat treated glass.

36 MATERIALS SCIENCE↗

Blue Emission Peak of GeO{sub 2} Particles Grown Using Thermal Evaporation

In this paper we report a simple thermal evaporation technique (horizontal tube furnace) to grow large quantities of GeO{sub 2} particles with diameters ranging from tens of nanometer to 500 nm on n-type (100) Si substrate free of catalyst. The particles were grown at temperature about 1000 degree sign C for 2 hrs and characterized by scanning electron microscopy (SEM), X-Ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX) and photoluminescence (PL) spectroscopy. The photoluminescence spectrum reveals several emission peaks around 400 nm at room temperature. Raman measurement also measured at room temperature for this GeO{sub 2} particles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

f{sub T} x BV{sub cbo} product modeling for SiGe:C HBTs

The specific aspects of SiGe:C HBT process and device simulation using TCAD are discussed. Cut-off frequency f{sub T} and collector junction breakdown voltage BV{sub cbo} dependences on carbon concentration in SiGe base area are investigated. The boron and carbon profiles in SiGe base are obtained to provide a trade-off between gain, cut-off frequency and break-down voltage. High values of f{sub T} x BV{sub cbo} product were achieved.

36 MATERIALS SCIENCE↗

Effect of different chemical treatments of surface on the height of Al-p-SiGe and Au-n-SiGe barriers

The effect of different chemical treatments on the properties of Au-n-SiGe and Al-p-SiGe Schottky barriers has been investigated. Etching under different conditions was used to prepare surfaces with different densities of surface states (D{sub ss}). It is shown that the barrier height in the structures under study correlates with the D{sub ss} value and germanium content in the Si{sub 1-x}Ge{sub x} alloy.

36 MATERIALS SCIENCE↗

Bi-doped fibre lasers operating in the range 1470-1550 nm

Lasing in bismuth-doped optical fibres in the range 1470-1550 nm has been demonstrated for the first time. The gain media were Bi-doped phosphogermanosilicate and, for the first time, germanosilicate glass fibres. The gain spectrum of the phosphogermanosilicate fibres extends from 1300 to 1550 nm, the range which can be used in next-generation optical fibre communication systems. (letters)

36 MATERIALS SCIENCE↗

High-pressure EXAFS study of vitreous GeO 2 up to 44 GPa

High-pressure extended x-ray absorption fine-structure measurements were performed on amorphous GeO 2 over increasing and decreasing pressure cycles at pressures up to 44 GPa. Several structural models based on crystalline phases with fourfold, fivefold, and sixfold coordination were used to fit the Ge-O first shell. The Ge-O bond lengths gradually increased up to 30 GPa. Three different pressure regimes were identified in the pressure evolution of the Ge-O bond distances. Below 13 GPa, the local structure was well described by a fourfold “quartzlike” model whereas a disordered region formed by a mixture of four- and five-coordinated germanium-centered polyhedra was observed in the intermediate pressure range between 13 and 30 GPa. Above 30 GPa the structural transition to the maximum coordination could be considered complete. The present results shed light on the GeO 2 densification process and on the nature of the amorphous-amorphous transition, suggesting that the transition is more gradual and continuous than what has been previously reported.

36 MATERIALS SCIENCE↗

Ge/SiGe quantum wells on Si(111): Growth, structural, and optical properties

The epitaxial growth of Ge/Si{sub 0.15}Ge{sub 0.85} multiple quantum wells (MQWs) on Si(111) substrates is demonstrated. A 3 μm thick reverse, double-step virtual substrate with a final composition of Si{sub 0.10}Ge{sub 0.90} has been employed. High resolution XRD, TEM, AFM and defect etching analysis has been used for the study of the structural properties of the buffer and of the QWs. The QW stack is characterized by a threading dislocation density of about 3 × 10{sup 7 }cm{sup −2} and an interdiffusion layer at the well/barrier interface of 2.1 nm. The quantum confined energy levels of this system have been calculated using the k·p and effective mass approximation methods. The Ge/Si{sub 0.15}Ge{sub 0.85} MQWs have been characterized through absorption and photoluminescence measurements. The optical spectra have been compared with those of Ge/Si{sub 0.15}Ge{sub 0.85} QWs grown on Si(001) through a thick graded virtual substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗