Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GADOLINIUM ISOTOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Study of the Photon Strength Functions for Gadolinium Isotopes with the DANCE Array

The gadolinium isotopes are interesting for reactor applications as well as for medicine and astrophysics. The gadolinium isotopes have some of the largest neutron capture cross sections. As a consequence they are used in the control rod in reactor fuel assembly. From the basic science point of view, there are seven stable isotopes of gadolinium with varying degrees of deformation. Therefore they provide a good testing ground for the study of deformation dependent structure such as the scissors mode. Decay gamma rays following neutron capture on Gd isotopes are detected by the DANCE array, which is located at flight path 14 at the Lujan Neutron Scattering Center at Los Alamos National Laboratory. The high segmentation and close packing of the detector array enable gamma-ray multiplicity measurements. The calorimetric properties of the DANCE array coupled with the neutron time-of-flight technique enables one to gate on a specific resonance of a specific isotope in the time-of-flight spectrum and obtain the summed energy spectrum for that isotope. The singles gamma-ray spectrum for each multiplicity can be separated by their DANCE cluster multiplicity. Various photon strength function models are used for comparison with experimentally measured DANCE data and provide insight for understanding the statistical decay properties of deformed nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Accumulation of gadolinium isotopes in used nuclear fuel - 14374

For the criticality safety control of damaged nuclear fuel, i.e., fuel debris, accounting for burnup credit (BUC) may become important if higher initial-uranium-enrichment fuel almost 5 wt% loaded into the reactor. In this case, if the presence of fission products (FP) could be confirmed, the negative reactivity effect of FP allows us to treat a substantially greater quantity of fuel debris in one removal and storage operation. In the technical development of the criticality safety control for fuel debris from the Fukushima accident in Japan, adopting BUC assuming the presence of the FP is being considered because the fuel used in the Fukushima Daiichi Nuclear Power Plant had a higher initial {sup 235}U enrichment, i.e., almost 5 wt%, than the fuel used at TMI-2. The Expert Group on Burnup Credit Criticality Safety (EGBUC) under the Working Party on Nuclear Criticality Safety (WPNCS) in the OECD/NEA Nuclear Science Committee carried out international burnup calculation benchmarks 'Phase-IIIB' and 'Phase-IIIC' for BWR fuel assemblies. In these benchmarks, the differences in the {sup 155}Gd calculation results of the participants generated keen interest because these differences were rather large. As the coordinators of the Phase-IIIC benchmark, the authors have conducted additional analyses on the accumulation of the gadolinium isotopes in used nuclear fuel during burnup. Without cooling time, the assembly-averaged amount of {sup 155}Gd against the burnup value depends on the burnout property of gadolinium in burnable poison rods. This is because the amount of gadolinium isotopes accumulated owing to the fission reaction is less than the residual gadolinium in the burnable poison rods. After the burnout of gadolinium isotopes in the burnable poison rods, the amount of {sup 155}Gd isotopes remains almost constant, which is defined by the balance between depletion due to the neutron capture reaction and generation due to beta-decay of {sup 155}Eu generated by the fission reaction. However, after a few years of cooling, the amount of {sup 155}Gd drastically increases owing to {sup 155}Eu decay. This effect is important for higher burnup fuel. In this case, the amount of gadolinium isotopes in the burnable poison rods is of less importance. This means that for better prediction of {sup 155}Gd, the adopted parameters and data pertaining to {sup 155}Eu generation have significantly greater importance than the burnup treatment of the burnable poison rods. The release behavior of europium as well as gadolinium during the severe accident should be examined. This paper provides basic information for considering {sup 155}Gd in the criticality safety evaluation of fuel debris. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutron capture signatures determined from gadolinium isotope compositions of uranium ore concentrates using MC-ICPMS

We present Gd isotope compositions on 25 well-characterized uranium ore concentrates (UOCs). About half the UOCs have isotope depletions in 157 Gd coupled with anticorrelated excesses in 158 Gd due to neutron capture effects. UOCs from older ore bodies and with higher U contents show larger neutron capture effects than UOCs from younger ore bodies with lower U contents. These Gd data are correlated with their previously measured Sm isotope compositions, and we use the Sm data to estimate the neutron fluence of these samples. In conclusion, this work demonstrates how Gd isotope signatures can be employed as a new tool for nuclear forensics.

Earth Sciences↗

Design and implementation of a data analysis pipeline for paper spray ionization mass spectrometry of UO 2 Cl 2

Ambient mass spectrometry is an emerging characterization method for nuclear materials analysis. SRNL has recently acquired a new JEOL AccuTOF™-DART® LP 4G with a Filter Spray™ front end sample injection system, to develop new methods for ambient mass spectrometry of uranium analytes. Preliminary measurements of uranium-containing samples have demonstrated a need to rapidly evaluate large datasets generated with tailored data analysis scripts. To address this gap a data analysis pipeline written in R within the R Studio environment has been developed. The pipeline comprises a series of processing steps where the data are ingested, analyte peaks of interest are extracted, subsequent ratio and normalization calculations are performed, and results are presented in a series of graphical plots. In detail, the data files containing up to several hundred chronological spectra of a single sample in netCDF format were first extracted into RStudio. Then, initial 3D plots of the data were created in respect to the time, intensity, and mass to charge domains. These graphics serve as an initial easily visualized survey of instrument data. Next, a .csv format file containing the names, masses, and abundances of isotopes of interest were ingested into RStudio and were used to automatically collect intensity values at the mass value. Uranium isotope ratios were plotted against gadolinium isotope ratios (gadolinium was used as an internal standard) and assessed for ion beam stability and intensity. The spectra were filtered by applying a threshold intensity for the 158GdO+ mass channel. A Monte Carlo experiment was performed by creating a theoretical distribution of the data in order to determine the ratio of the uranium isotopes. The results show that the developed data analysis pipeline successfully filters high quality data from overall poor quality runs. Our results also support the idea that paper spray ionization mass spectrometry can be used for both detection and quantification of trace amounts of uranium compounds.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Isotope Enrichment Detection by Laser Ablation - Laser Absorption Spectrometry: Automated Environmental Sampling and Laser-Based Analysis for HEU Detection

The global expansion of nuclear power, and consequently the uranium enrichment industry, requires the development of new safeguards technology to mitigate proliferation risks. Current enrichment monitoring instruments exist that provide only yes/no detection of highly enriched uranium (HEU) production. More accurate accountancy measurements are typically restricted to gamma-ray and weight measurements taken in cylinder storage yards. Analysis of environmental and cylinder content samples have much higher effectiveness, but this approach requires onsite sampling, shipping, and time-consuming laboratory analysis and reporting. Given that large modern gaseous centrifuge enrichment plants (GCEPs) can quickly produce a significant quantity (SQ ) of HEU, these limitations in verification suggest the need for more timely detection of potential facility misuse. The Pacific Northwest National Laboratory (PNNL) is developing an unattended safeguards instrument concept, combining continuous aerosol particulate collection with uranium isotope assay, to provide timely analysis of enrichment levels within low enriched uranium facilities. This approach is based on laser vaporization of aerosol particulate samples, followed by wavelength tuned laser diode spectroscopy to characterize the uranium isotopic ratio through subtle differences in atomic absorption wavelengths. Environmental sampling (ES) media from an integrated aerosol collector is introduced into a small, reduced pressure chamber, where a focused pulsed laser vaporizes material from a 10 to 20-µm diameter spot of the surface of the sampling media. The plume of ejected material begins as high-temperature plasma that yields ions and atoms, as well as molecules and molecular ions. We concentrate on the plume of atomic vapor that remains after the plasma has expanded and then cooled by the surrounding cover gas. Tunable diode lasers are directed through this plume and each isotope is detected by monitoring absorbance signals on a shot-to-shot basis. The media is translated by a micron resolution scanning system, allowing the isotope analysis to cover the entire sample surface. We also report, to the best of our knowledge, the first demonstration of laser-based isotopic measurements on individual micron-sized particles that are minor target components in a much larger heterogeneous mix of ‘background’ particles. This composition is consistent with swipe and environmental aerosol samples typically collected for safeguards ES purposes. Single-shot detection sensitivity approaching the femtogram range and relative isotope abundance uncertainty better than 10% has been demonstrated using gadolinium isotopes as surrogate materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Benchmark results with a new evaluation of 155 Gd and 157 Gd

Evaluations of gadolinium isotopes 155 Gd and 157 Gd in the resolved resonance region were performed with the code SAMMY. The main objective for revising the resonance evaluations of these isotopes was to address issues related to critical benchmark results.

07 ISOTOPE AND RADIATION SOURCES↗

Discovery of samarium, europium, gadolinium, and terbium isotopes

Currently, thirty-four samarium, thirty-four europium, thirty-one gadolinium, and thirty-one terbium isotopes have been observed and the discovery of these isotopes is described here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.

07 ISOTOPE AND RADIATION SOURCES↗

Beyond the relativistic mean-field approximation. III. Collective Hamiltonian in five dimensions

The framework of relativistic energy density functionals is extended to include correlations related to the restoration of broken symmetries and fluctuations of collective variables. A new implementation is developed for the solution of the eigenvalue problem of a five-dimensional collective Hamiltonian for quadrupole vibrational and rotational degrees of freedom, with parameters determined by constrained self-consistent relativistic mean-field calculations for triaxial shapes. The model is tested in a series of illustrative calculations of potential energy surfaces and the resulting collective excitation spectra and transition probabilities of the chain of even-even gadolinium isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modified versions of the fuel performance codes RTOP and RTOP-CA

RTOP code predicts thermal and mechanical behavior of LWR fuel rods and release of GFPs both in normal stationary and transient operation modes, and transient power ramps, specific to the reactivity-initiated accidents (RIA). Computational domains of the code include fuel column, zirconium cladding, gas under cladding, and fuel microstructure - UO{sub 2} grain and the development of gaseous porosity of different origin during irradiation. RTOP-CA code is based on the RTOP code. It simulates the behavior of a fuel rod with cladding rupture opening and RFPs release into the primary coolant circuit in normal operation modes. The paper presents the results of development and validation of engineering models, which take into account characteristics of the neutron spectrum during the fuel cycle and are integrated into modernized versions of the fuel performance codes RTOP and RTOP-CA. The paper focuses on the detailed description of two models. Four-group neutron-physical engineering model describes burn-out of gadolinium isotopes and calculates spatial power profile in a Gd-doped fuel rod pellet. The second engineering model presented is developed for fast estimation of fuel burnup in case of fuel rod cladding leakage accident. The comparison of the present calculations with the results of calculations by neutron codes shows that the model describes the heat rate distribution and the gadolinium burn-out with sufficient accuracy. The code also calculates the LHR of Gd-doped fuel rods given the heat rate of the adjacent UO{sub 2} fuel rods. This work allows determining the histories of LHR for the Gd-doped fuel rod from the average LHR of FA for various equilibrium WWER fuel cycles, power units and fuel enrichments. The presented model is implemented in the RTOP fuel performance code to calculate the thermomechanical behavior of the fuel rods. An engineering-physical model is developed for fast estimation of {sup 134}Cs/{sup 137}Cs activity ratio in fuel taking into account the parameters of the neutron spectrum during the fuel cycle. Implementation of the model enables to increase the reliability of correct fuel burnup determination in a failed fuel assembly (FA)based on the FERDS activity measurements during reactor operation. Results of the model calculations obtained for the FAs with a higher fuel enrichment and the NPP activity measurements have shown a higher {sup 134}Cs/{sup 137}Cs activity ratio compared to the values for the fuel with enrichment up to 3.6 wt. % in {sup 235}U. Currently, the engineering model is applicable within the range of UO{sub 2} enrichment from 3 to 5 wt. % in {sup 235}U, and Gd{sub 2}O{sub 3} enrichment from 5 to 8 wt. %.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Peninsulas of the neutron stability of nuclei in the vicinity of neutron magic numbers

On the basis of the Hartree-Fock method as implemented with Skyrme forces (Ska, SkM*, Sly4, and SkI2) and with allowance for an axial deformation and nucleon pairing in the Bardeen-Cooper-Schrieffer approximation, the properties of extremely neutron-rich even-even nuclei were calculated beyond the neutron drip line known earlier from theoretical calculations. It was shown that the chains of isotopes beyond the neutron drip line that contain N = 32, 58, 82, 126, and 184 neutrons form peninsulas of nuclei stable against the emission of one neutron and, in some cases, peninsulas of nuclei stable against the emission of two neutrons. The neutron- and proton-density distributions in nuclei forming stability peninsulas were found to be spherically symmetric. A mechanism via which the stability of nuclei might be restored beyond the neutron drip line was discussed. A comparison with the results of calculations by the Hartree-Fock-Bogolyubov method was performed for long chains of sulfur and gadolinium isotopes up to the neutron drip line.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Regolith history from cosmic-ray-produced isotopes

A statistical model is given for soil development relating meteoroid impacts on the moon to cosmic-ray-produced isotopes in the soil. By means of this model, the average lunar mass loss rate during the past 1.4 aeons is determined to be 170g/sq cm aeon and the soil mixing rate to be approximately 200 cm/aeon from the gadolinium isotope data for the Apollo 15 and 16 drill stems. The isotope data also restrict the time variation of the meteoroid flux during the past 1.4 aeons.

Fireman, E. L.↗

Measuring the β-decay Properties of Neutron-rich Exotic Pm, Sm, Eu, and Gd Isotopes to Constrain the Nucleosynthesis Yields in the Rare-earth Region

Abstract The β -delayed neutron-emission probabilities of 28 exotic neutron-rich isotopes of Pm, Sm, Eu, and Gd were measured for the first time at RIKEN Nishina Center using the Advanced Implantation Detector Array (AIDA) and the BRIKEN neutron detector array. The existing β -decay half-life ( T 1/2 ) database was significantly increased toward more neutron-rich isotopes, and uncertainties for previously measured values were decreased. The new data not only constrain the theoretical predictions of half-lives and β -delayed neutron-emission probabilities, but also allow for probing the mechanisms of formation of the high-mass wing of the rare-earth peak located at A ≈ 160 in the r -process abundance distribution through astrophysical reaction network calculations. An uncertainty quantification of the calculated abundance patterns with the new data shows a reduction of the uncertainty in the rare-earth peak region. The newly introduced variance-based sensitivity analysis method offers valuable insight into the influence of important nuclear physics inputs on the calculated abundance patterns. The analysis has identified the half-lives of 168 Sm and of several gadolinium isotopes as some of the key variables among the current experimental data to understand the remaining abundance uncertainty at A = 167–172.

79 ASTRONOMY AND ASTROPHYSICS↗

Quasiparticle random-phase approximation calculations for M 1 transitions with the noniterative finite-amplitude method and application to neutron radiative capture cross sections

Here, we derive the equations of quasiparticle random-phase approximation (QRPA) based on the finite amplitude method with the Hartree-Fock+Bardeen–Cooper–Schrieffer (HF+BCS) single-particle states, and calculate the magnetic dipole (M⁢1) transition for deformed gadolinium isotopes. Our QRPA calculation shows both large spin-flip transitions in the 5 to 10 MeV excitation energy and the low energy orbital transition that would correspond to the M⁢1 scissors mode observed in nuclear experiments. Then, we calculate neutron capture reactions based on the statistical Hauser-Feshbach theory with the photoabsorption cross sections of even-even nuclei given by QRPA. We find that the capture cross section is enhanced due to the contribution from the low energy M⁢1 transition although the calculated capture cross section still underestimates the experimental data. This issue in the calculated capture cross section could be improved by uncertainties of the low energy E⁢1 transition neglected in our QRPA calculation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evolution of nuclear shapes in medium mass isotopes from a microscopic perspective

The self-consistent Hartree-Fock-Bogoliubov approximation based on the finite-range and density-dependent Gogny interaction (parametrization D1S) has been used to generate potential energy curves in various chains of Pd, Xe, Ba, Nd, Sm, Gd, and Dy isotopes. The evolution of shapes with the number of nucleons is studied and a search for signatures of E(5) and X(5) critical point symmetries is also conducted. The results are compared with those obtained in the framework of other mean-field approximations to the nuclear many-body problem. The role of triaxiality in nuclei where this degree of freedom could be relevant is considered and discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Remnants of spherical shell structures in deformed nuclei: The impact of an N=64 neutron subshell closure on the structure of N~90 gadolinium nuclei

Odd-mass gadolinium isotopes around N = 90 were populated by the (p,d ) reaction, utilizing 25-MeV protons, resulting in population of low-spin quasineutron states at energies near and below the Fermi surface. Systematics of the single quasineutron levels populated are presented. A large excitation energy gap is observed between levels originating from the 2d3/2 , 1h11/2 , and 3s1/2 spherical parents (above the N = 64 gap), and the 2d5/2 (below the gap), indicating that the spherical shell model level spacing is maintained at least to moderate deformations.

Ross, T. J.↗

Lifetime Measurements for the First 2{sup +} States in {sup 162,} {sup 164}Gd Populated by the beta Decay of {sup 162,} {sup 164}Eu

Lifetimes of the first 2{sup +} states in {sup 162,} {sup 164}Gd have been measured by means of beta--gamma delayed coincidence technique for mass-separated {sup 162}Eu and {sup 164}Eu isotopes. Using the obtained lifetimes tau({sup 162}Gd) = 3.98(8) ns and tau({sup 164}Gd) = 4.0(2) ns, B(E2;0{sup +}square2{sup +}) values were deduced as B(E2;0{sup +}square2{sup +}) ({sup 162}Gd) 5.45(11) e{sup 2}b{sup 2} and B(E2;0{sup +}square2{sup +}) ({sup 164}Gd) = 5.2(3) e{sup 2}b{sup 2}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

FY16 Progress in Resonance Evaluations of Gadolinium for the NCSP

A reevaluation of the resonance regions of the five most abundant isotopes of gadolinium is under way. The task of the reevaluation is being done as a collaboration between the nuclear data group at Oak Ridge National Laboratory (ORNL) and at the Institute for Radiological Protection and Nuclear Safety (IRSN) under a memorandum of understanding between the US Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP) and IRSN.

07 ISOTOPE AND RADIATION SOURCES↗