Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fusion experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Studies of localized mix and asymmetry caused by the stalk in inertial fusion experiments at OMEGA

In an inertially confined fusion experiment, a capsule of fusion fuel is compressed to high temperatures and densities using lasers, creating a hot plasma in which thermonuclear fusion reactions take place. To achieve efficient conversion of laser energy to fuel heating, the implosion must be as spherically symmetric as possible. One common source of asymmetry that degrades performance is the stalk and glue spot that hold the capsule in place before the experiment. The exact nature and magnitude of this perturbation had not been previously quantified. In this work, inertially confined fusion experiments were executed with an additional stalk on the capsule to measure and quantify the effect of the stalk and glue spot on the symmetry and performance. It is found that the stalk drives low-mode asymmetry by shadowing the laser drive on the part of the shell near the glue spot, enhancing the hot-spot velocity toward the stalk by 40–80 km/s and elongating the hot-spot along the stalk axis. It is also found that localized mix due to the additional stalk has a negligible effect on implosion performance. Two-dimensional radiation-hydrodynamic simulations using the xRAGE code reproduce the direction of the experimentally observed change to hot-spot velocity and implosion performance metrics, but not the observed elongation, suggesting that this feature results from an interaction between stalk perturbations and other preexisting asymmetry seeds, such as laser drive asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Optimizing the Smoothness and Thickness Uniformity of Thin-Film Parylene-N Vapor-Deposited Coatings for Inertial Confinement Fusion Experiments

Polymer coatings with submicrometer smoothness and constant thickness are a required component in a variety of inertial confinement fusion experiments. Smoothness is important for minimizing Rayleigh-Taylor-driven hydrodynamic instabilities, and uniform thickness is important for uniform shock propagation and shell convergence, both of which are critical phenomena that affect the experiment. The preferred polymer coating method is to vapor deposit the parylene-N polymer because it provides nominally smooth conformal coatings. As the coating thickness exceeds 5 µm, however, dome-shaped nodular growth defects develop and the thickness will vary by up to 17% over a distance of 3 cm. This study presents a deterministic method for achieving uniform film thicknesses with ±2% variability over 3 cm and a predictive method to control the thickness to within 5% of the desired value. A coating smoothness of ∼50 nm rms, measured over 40 000 µm 2 , was achieved by adding additional surfaces near the substrates. This additional area improved the thickness uniformity, an effect that is attributed to the low sticking coefficient of the parylene monomer.

chemical vapor deposition (CVD)↗
DOE OSTI2025

First Demonstration of Improved Fusion Yield with Increased Compression through Reduced Adiabat in Inertial Confinement Fusion Experiments at the National Ignition Facility

Recent advancements in indirect-drive inertial confinement fusion (ICF) experiments at the National Ignition Facility (NIF) have achieved a significant milestone by demonstrating target gains greater than one, yet future applications necessitate much higher target gains. One approach to achieving improved implosion performance is to pursue increased fuel compression via a lowered implosion adiabat. Experiments have been performed testing a reduced adiabat by introducing small changes to the drive laser pulse shape and the resulting shock timing for an existing implosion design at 1.9 MJ laser drive with near-ignition performance (experiment N210808). Experiments using the updated design demonstrate, for the very first time, increased compression and fusion yield in ICF implosions on the NIF by using a lower fuel adiabat, and increased compression with a reduced adiabat in high-density carbon ablators. Compared to the previously best-performing experiment with a laser energy of 1.9 MJ, these experiments exhibit increases of up to 80% and 14% in nuclear fusion yield and fuel compression, respectively, and with repeatable performance. Further, it is the only implosion design to have achieved a target gain exceeding one with a laser energy of less than 2 MJ. These findings highlight the efficacy of reduced adiabat designs in achieving higher compression and fusion yields, offering a promising pathway for future ICF applications. In conclusion, this Letter not only addresses a long-standing question in ICF but also paves the way for achieving higher target gains with optimized implosion strategies.

Hohenberger, M. [Lawrence Livermore National Labor↗
DOE OSTI2025

Inference of three-dimensional hot-spot and shell morphology in inertial confinement fusion experiments using a convolutional neural network

The performance of inertial confinement fusion (ICF) implosions is sensitive to the three-dimensional (3D) morphology of the hot-spot and shell configurations. The ability to infer shell-mass uniformity and reconstruct 3D hot spots is crucial for quantifying the degradation of ignition criteria and improving symmetry in ICF implosion experiments. In this work, we present a deep-learning convolutional neural network (CNN) for reconstructing 3D hot-spot and shell structures for ICF capsules. The 3D geometry of the hot spot is reconstructed from x-ray images measured from multiple lines of sight on OMEGA. The shell configuration is inferred indirectly through machine learning using a convolutional neural network extensively trained on a dec3d simulation database. This simulation-dependent approach yields consistent agreement between reconstructed 3D shell densities and machine-learning optimized dec3d simulation results. This work demonstrates a CNN framework that successfully reconstructs 3D capsule structures from two-dimensional images in ICF implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Automated and highly parallelized Bayesian optimization scheme for direct drive fusion experiments on OMEGA

Finding the optimal implosion design on existing experimental facilities for inertial confinement fusion requires an exhaustive search of the vast design parameter space. This is infeasible both with experiments and with simulations. Consequently, a large fraction of the experimentally realizable design space remains unexplored, and new design schemes are challenging to optimize in a reasonable time frame. On the OMEGA laser facility, predictive machine learning models have been developed to accurately forecast the result of an experiment using only inexpensive simulations and the large dataset of prior experimental data. However, the full design space remains vast enough to be unassailable with simple optimization techniques. Here we develop an automated and optimally parallel Bayesian optimization algorithm that can entirely optimize the target and pulse shape of a direct-drive ICF implosion under a given design paradigm. We use this algorithm to find a markedly improved design for the performance implosions on OMEGA that is predicted to hydroequivalently scale to ignition at 2.15 MJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

The next-generation particle x-ray temporal diagnostic for simultaneous time-resolved measurements of nuclear-burn and x-ray emission histories in support of basic-science and inertial confinement fusion experiments at OMEGA

The next-generation Particle X-ray Temporal Diagnostic (PXTD) has been implemented for simultaneous measurements of x-ray, charged particle, and neutron emission histories from a wide range of inertial confinement fusion and high energy density plasma experiments, demonstrating excellent timing accuracy and greatly improved experimental flexibility. The key changes to the previously fielded system are a redesigned set of thin foil filters in front of the scintillators and individual neutral density filters for each region of the detector. The fully implemented PXTD system can provide unique information about the evolution of ion and electron temperatures in multi-ion and kinetic-physics experiments, proton radiography experiments, and DT experiments executed at the OMEGA facility. The system has 35 ps time resolution and negligible relative timing uncertainty between measured emission history signals. The first use of the upgraded four-channel PXTD system during a set of D 3 He-filled silica-glass implosions on OMEGA captured electron temperatures with a minimum uncertainty of 0.5 keV and resolved both the relative timings and widths of neutron, proton, and x-ray peaks within a single recorded image.

Evans, T. E. [Massachusetts Inst. of Technology (M↗
DOE OSTI2025

Modern version of the uncited 1938 experiment that first observed DT fusion

Experiments are described, and results are provided, for the duplication of the first-ever triton-deuterium (colloquially referred to as DT) fusion experiment accidentally performed by A.J. Ruhlig in 1938, but forgotten in the published scientific literature. Here, we find that Ruhlig overestimated the ratio of the triton-deuterium over deuteron-deuterium neutron yields in his secondary reaction (Reaction-in-Flight) experiment compared to modern theoretical calculations and our duplication of his experiment using modern neutron detection methods. Nevertheless, Ruhlig’s observation provided the motivation for the application of DT fusion after World War II and its more recent importance in peaceful energy production at DT fusion facilities around the world. Additionally, the experimental technique used in the present work provides a novel approach for checking on low-energy triton stopping powers in deuterium containing compounds.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Fusion of Experiments and Simulations for Real-Time Identification of Pipeline Defects

In this study, we explored fusion of experiments and simulations for real time identification of pipeline defects across physical and non-physical domains. The challenges associated to data processing were addressed and a combined classification models was presented via CNN models. In addition, regression model based on XGBOOST is built to determine the defect location and defect dimension from data-driven features of guided wave signals captured by SMS fiber optic sensor.

deep learning↗
DOE OSTI2025

Fusion of Experiments and Simulations for Real-Time Identification of Pipeline Defects

In this study, we explored fusion of experiments and simulations for real time identification of pipeline defects across physical and non-physical domains. The challenges associated to data processing were addressed and a combined classification models was presented via CNN models. In addition, regression model based on XGBOOST is built to determine the defect location and defect dimension from data-driven features of guided wave signals captured by SMS fiber optic sensor.

deep learning↗
DOE OSTI2025

Using radiochemistry to diagnose fuel-ablator mix in inertial confinement fusion studies at the National Ignition Facility: measurement of Tc/Mo isotopic ratios for the Pushered Single Shell campaign

The development of radiochemical measurement techniques as a diagnostic for fusion experiments at the National Ignition Facility enables a new method for assessing fuel-ablator mix and the impact of this mix on capsule performance. Diagnosing capsule mix in internal confinement fusion studies is difficult due to the small spatial scales (10s of µm) and short-time frames (100s of ps) over which the mix typically evolves in these experiments. For the Pushered Single Shell campaign, radiochemical measurements on debris collected from fusion experiments can be used to determine isotopic ratios of activation products, particularly 96g Tc/ 99 Mo and 95g Tc/ 99 Mo, to provide vital information on nuclear reactions in the burning plasma that can inform simulations that seek to understand the degree of capsule-fuel mix and the impact on the capsule performance. These radiochemical measurements have been conducted regularly since November 2023 providing data on a range of capsule designs and neutron yields. Data from eight NIF experiments is presented, the measured 96g Tc/ 99 Mo and 95g Tc/ 99 Mo range from (0.5–5) × 10 –4 to (0.3–3) × 10 –4 , respectively. The development of radiochemical diagnostics aids in understanding and optimizing the design of fusion experiments, providing unique and valuable insights into capsule behavior and directly measuring fuel-ablator mix.

and nuclear chemistry↗
DOE OSTI2025

Exploring scenarios for enhanced fuel compression and performance on the National Ignition Facility with machine-learning-aided design techniques

Recent fusion experiments on the National Ignition Facility (NIF) have achieved ignition, producing multi-MJ fusion yields for input laser energies of roughly 2 MJ [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)]. Building on the success of the target designs that have achieved ignition, we explore new implosion scenarios predicted to generate significantly more compression of the dense DT ice layer and correspondingly higher yields while preserving many of the key physics characteristics of present-day ignition designs. Our main result is a novel 3-shock implosion scheme that effectively minimizes the shock-induced entropy in the dense, accelerating DT shell and maximizes the resulting fuel compression subject to a fixed leading shock strength consistent with present-day ignition experiments, which is necessary to melt the crystalline high-density carbon ablator. Compared to the first NIF experiment to fulfill Lawson's ignition criterion, shot N210808 [Abu-Shawareb et al., Phys. Rev. Lett. 129, 075001 (2022)], our design exhibits a 40% increase in simulated peak areal density (ρR) and a 5× increase in 1D fusion yield using a 4% lighter ablator and identical DT payloads. We also present a complete integrated 2D hohlraum design and laser pulse specifications capable of generating the desired 3-shock drive and maintaining control of the low-mode capsule implosion symmetry, where the increase in simulated 2D yield relative to N210808 is > 10×. This new implosion regime was discovered with help from a machine-learning-enabled capsule design optimization framework. We outline the workflow this automated tool uses to identify improved design candidates by running several rounds of capsule simulations, constructing a surrogate model mapping input variations to key physics output quantities, and querying the resulting statistical model to propose adjustments to the x-ray drive and capsule to reach a set of physics objectives prescribed by the designer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Influence of the drive design on ablation front hydrodynamic instability growth in a capsule implosion at the National Ignition Facility

A critical aspect of inertial confinement fusion experiments lies in the control of ablation front instabilities during the implosion process. The growth of Rayleigh–Taylor and Richtmyer–Meshkov instabilities, seeded by target defects, can significantly degrade the performance of the implosion. Here, this study explores the influence of drive design on ablation front stability using the hydro-growth radiography platform at the National Ignition Facility. This platform allows the measurement of the ablation front hydrodynamic instability growth. Because these measurements are restricted to early convergence, their primary role is to constrain the initial instability growth and benchmark the simulations used to infer shell integrity and performance at peak velocity and ignition. Three ignition designs, Hybrid-E (HyE), SQ-n (“S” for scaling and “Q” for quality), and High temperature, High thickness (HiT) were analyzed. The results demonstrated a high dependence of the growth factor on the choice of design, capsule scale as well as the hohlraum conditions, mainly the radiative temperature and the gold M-band emission. HyE and SQ-n display a similar growth factor range, but their evolution is different due to the design differences in hohlraum conditions. HiT has the lowest growth factor of the studied designs, which is a result of a higher radiative temperature. These results highlight the importance of design choices in controlling instability dynamics. These insights inform future drive design strategies to enhance stability and efficiency in fusion ignition experiments.

Physics↗