SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computer program calculates fission product inventories and source strengths associated with the operation of U-235 fueled nuclear power reactor. It utilizes a fission-product nuclide library of 254 nuclides, and calculates the time dependent behavior of the fission product nuclides formed by fissioning of U-235.
Results are described for studies designed to develop routine methods for in-situ measurement of the abundance of Th and U on a microscale in heterogeneous samples, especially rocks, using the secondary high-energy neutron flux developed when the 650 MeV proton beam of an accelerator is stopped in a 42 x 42 cm diam Cu cylinder. Irradiations were performed at three different locations in a rabbit tube in the beam stop area, and thick metal foils of Bi, Th, and natural U as well as polished silicate glasses of known U and Th contents were used as targets and were placed in contact with mica which served as a fission track detector. In many cases both bare and Cd-covered detectors were exposed. The exposed mica samples were etched in 48% HF and the fission tracks counted by conventional transmitted light microscopy. Relative fission cross sections are examined, along with absolute Th track production rates, interaction tracks, and a comparison of measured and calculated fission rates. The practicality of fast neutron radiography revealed by experiments to data is discussed primarily for Th/U measurements, and mixtures of other fissionable nuclei are briefly considered.
Effective mass in nuclear deformational Hamiltonian calculated by asymptotic approximation method which is two orders of magnitude better than liquid drop model
Analyses of noble gases in whole rock samples of the howardites Bholghati and Kapoeta and grain-size separates of Kapoeta yield evidence for excesses of the Xe isotopes Xe-129 , Xe-131, Xe-132, Xe-134, and Xe-136 in a low-temperture component, similar to lunar excess fission Xe. Such a component may be able to provide chronometric information if the relative abundances of radioactive progenitors (I-129, Pu-244, and U-238) can be determined, but the isotopic spectra obtained are not sufficiently precise to do so. Eucritic clast BH-5 in Bholghati contains Xe produced in situ by the decay of Pu-244. Calculated fission Xe retention ages are 30-70 Ma after the formation of the solar system, consistent with the apparent presence of Sm-146 decay products. Both the clast and the matrix of Bholghati have K-Ar ages of about 2 Ga, suggesting a common thermal event at least that recently.
Highly efficient, compact nuclear reactors would provide high specific impulse spacecraft propulsion. This analysis and numerical simulation effort has focused on the technical feasibility issues related to the nuclear design characteristics of a novel reactor design. The Fissioning Plasma Core Reactor (FPCR) is a shockwave-driven gaseous-core nuclear reactor, which uses Magneto Hydrodynamic effects to generate electric power to be used for propulsion. The nuclear design of the system depends on two major calculations: core physics calculations and kinetics calculations. Presently, core physics calculations have concentrated on the use of the MCNP4C code. However, initial results from other codes such as COMBINE/VENTURE and SCALE4a. are also shown. Several significant modifications were made to the ISR-developed QCALC1 kinetics analysis code. These modifications include testing the state of the core materials, an improvement to the calculation of the material properties of the core, the addition of an adiabatic core temperature model and improvement of the first order reactivity correction model. The accuracy of these modifications has been verified, and the accuracy of the point-core kinetics model used by the QCALC1 code has also been validated. Previously calculated kinetics results for the FPCR were described in the ISR report, "QCALC1: A code for FPCR Kinetics Model Feasibility Analysis" dated June 1, 2002.
The Weizsacker-Williams (WW) method of virtual quanta is used to make approximate cross section calculations for peripheral relativistic heavy-ion collisions. We calculated the Coulomb fission cross sections for projectile ions of Pb-208 and Bi-209 with energies of 158 A GeV interacting with a Pb-208 target. We also calculated the electromagnetic absorption cross section for Pb-208 ion interacting as described. For comparison we use both the full WW method and a standard approximate WW method. The approximate WW method in larger cross sections compared to the more accurate full WW method.
Fission threshold calculation for systematics of spontaneous fission rates and neutron-fission width ratio
Calculations of ionization-excitation source rates in gaseous media irradiated by fission fragments and alpha particles
The times at which phyllosilicate matrix and euhedral olivines became associated have been determined for five C2 meteorites. The ages, calculated from fission track densities on crystal surfaces, are based on an initial Pu-244/U-238 ratio in the matrix material of 0.0154 at 4.6 b.y., and range from 4.22 b.y. for Nogoya to 4.42 b.y. for Murray. Unless the initial Pu-244/U-238 ratio was less than 0.004, the meteorites cannot have existed in their present form for 4.6 billion years. The measured ages place limits on the time when pre-compaction effects such as micrometeorite craters and solar flare tracks were produced, and they may approximately date the formation of the olivine crystals themselves.
Comparison has been made of the relative power-to-weight ratios calculated for fission-electric cell reactor power systems based upon cells of plane, cylindrical, and spherical geometry. It is demonstrated that for systems of equal power output, the choice of cell geometry does not greatly affect the total weight of the system.
Calculations were made to determine if a cladding failure could be detected in a 100-kW zirconium hydride reactor primary system by monitoring the highly radioactive NaK coolant for the presence of I-131. The system is to be completely sealed. A leak of 0.01 percent from a single fuel pin was postulated. The 0.364-MeV gamma of I-131 could be monitored on an almost continuous basis, while its presence could be varified by using a longer counting time for the 0.638-MeV gamma. A lithium-drifted germanium detector would eliminate radioactive corrosion product interference that could occur with a sodium iodide scintillation detector.
Beta decay, using two-step transition models in calculating spectra shapes for uranium and plutonium fission fragments
Fission tracks in phosphates from one gas-poor chondrite and three gas-rich ones are studied to determine their thermal history and brecciation time scales. Model fission track ages are calculated for given track densities due to Pu-244 and U-238; track densities and uranium measurements for whitlockite are shown, and possible sources of the tracks are mentioned. Details of track density and uranium measurements are discussed for each meteorite separately. Whitlockites from all the meteorites give model fission track ages of 4.4 Gyr assuming a Pu/U ratio at 4.55 Gyr of 0.045. The final brecciation event definitely did not reset the track clock in phosphates of one meteor and probably not in another two. It is concluded that the observed fission track ages date the end of metamorphic cooling in the meteorite parent bodies and support the planetesimal model for the formation of xenolithic chondrites.
Fission product gas pressure calculated for uranium dioxide ceramic fuel elements
Calculation of crew radiation dosage from uranium gas nuclear rocket engine exhaust backflow of fission products
The lethargy-dependent equations of the consistent Pl approximation to the Boltzmann transport equation for slowing down neutrons have been used as the basis of an IBM 704 computer program. Some of the effects included are (1) linearly anisotropic center of mass elastic scattering, (2) heavy element inelastic scattering based on the evaporation model of the nucleus, and (3) optional variation of the buckling with lethargy. The microscopic cross-section data developed for this program covered 473 lethargy points from lethargy u = 0 (10 Mev) to u = 19.8 (0.025 ev). The value of the fission neutron age in water calculated here is 26.5 square centimeters; this value is to be compared with the recent experimental value given as 27.86 square centimeters. The Fourier transform of the slowing-down kernel for water to indium resonance energy calculated here compared well with the Fourier transform of the kernel for water as measured by Hill, Roberts, and Fitch. This method of calculation has been applied to uranyl fluoride - water solution critical assemblies. Theoretical results established for both unreflected and fully reflected critical assemblies have been compared with available experimental data. The theoretical buckling curve derived as a function of the hydrogen to uranium-235 atom concentration for an energy-independent extrapolation distance was successful in predicting the critical heights of various unreflected cylindrical assemblies. The critical dimensions of fully water-reflected cylindrical assemblies were reasonably well predicted using the theoretical buckling curve and reflector savings for equivalent spherical assemblies.
A theory for the formation of the Moon which involves the dynamic fission of a rapidly rotating protoplanet, which might then result in the formation of the Earth and the Moon is discussed. The fission hypothesis was originally based on analytic, linearized models of the growth of asymmetry in homogenous bodies. The fully nonlinear evolution of the dynamic instability in inviscid, compressible bodies was calculated by numerical techniques. It was found that the dynamic instability degenerates into the ejection of a ring of matter with a substantial fraction of the mass, leaving behind a central body with most of the mass. The linearized analytical approach and the numerical approach were used to show that dynamic fission probably does not occur in rocky protoplanets. The numerical calculations are performed with a fully three dimensional hydrodynamical code, which allows the nonlinear, time evolution of the instability to be followed. Sequences of uniformly rotating equilibria were constructed and are used as the initial models for the fission calculations. An initially imposed asymmetry consisting of a 10% binary perturbation in the density was found to disappear on the rotational period time scale. No dynamic instability occurred. This result are verified by including the velocity dissipation terms in the linearized analysis of the stability of a Maclaurin spheroid: the dynamic instability disappears when the simulated viscous dissipation terms are included. It is concluded that any rocky body, even with considerable partial melt or a molten core, should be stable to dynamic fission; any rotational instability that occurs can only result in equatorial mass loss.
Nuclear fission reactions induced by the electromagnetic field of relativistic nuclei are studied for energies relevant to present and future relativistic heavy ion accelerators. Cross sections are calculated for U-238 and Pu-239 fission induced by C-12, Si-28, Au-197, and U-238 projectiles. It is found that some of the cross sections can exceed 10 b.