Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ferry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1963

LATERAL-RANGE AND HYPERSONIC LIFT-DRAG-RATIO REQUIREMENTS FOR EFFICIENT FERRY SERVICE FROM A NEAR-EARTH MANNED SPACE STATION

The operation of any long-term manned space station will require some type of ferry vehicle to transport men and equipment to and from the station with regularity and reliability. Such a vehicle, designed for entry at near-orbital speeds, could also be useful in the return from any deeper space mission if either an earth-orbit rendezvous terminal maneuver or a maneuver combining atmospheric braking and a near-earth parking orbit is used. This study was undertaken to determine the class of vehicle which could be most efficiently used as a ferry vehicle between a near-earth space station and the earth. One measure of this efficiency is the ability of the vehicle to reach pre-chosen landing sites with some prescribed frequency. In considering this frequency of return it is necessary to consider not only the normal mode of operation in which only infrequent returns are scheduled at desirable times, but also operation under various degrees of emergency, which dictate quick or even immediate return to earth. In extreme emergencies, when immediate return to earth is necessary, choice of landing site becomes impractical. In most cases, however, although it might be required to abandon the station quickly, the ferry vehicle could remain in orbit for some time before initiating reentry in order to land at a prechosen site. The allowable delay time in orbit would be determined primarily by the capabilities of the ferry life-support system. This paper will examine the geometry of the ferry ranging problem, that is, the lateral ranges required to reach chosen landing sites from various near-earth orbits, and will investigate and compare several means of achieving these ranges. The particular case considered is that of returning from a space station which is in a circular orbit at an altitude of 200 statute miles, but the results obtained are not sensitive to orbit altitude for orbits within a few hundred miles of the surface. From this orbit, the vehicle will retro and reenter at very close to satellite velocity. The downrange problem can be handled by proper timing of the retrofiring , and the desired lateral range can be achieved by aerodynamics, space propulsion to change orbit plane, atmospheric propulsion, or combinations of these methods. The relative cost in terms of weight of using these different methods to achieve lateral range will be discussed.

Hypersonic vehicle↗
NASA NTRS1977

Antonio Ferri: Selected Papers on Advanced Design of Air Vehicles

This publication contains a selection of ten papers by Professor Antonio Ferri, who died in 1976 after many years association with AGARD. These papers were selected by a committee composed of Professor P. Libby, Professor R. Monti, Professor R.G. Napolitano, Dr D.M. Rogers and Professor R.Vaglio, and are concerned with the advanced design of air vehicles. They are published to bring together in one place examples of Professor Ferri's most important contributions to aerospace research and development. A biography of Professor Ferri is included, together with a bibliography of his works, and tributes from his friends and colleagues.

Antonio Ferri↗
NASA NTRS1987

Ferry to the moon

Solar-electric propulsion for a fleet of lunar ferry vehicles may allow the creation of a permanent lunar base not long after the turn of the century with greater cost effectiveness than a fleet of chemically powered spacecraft. After delivery by the Space Shuttle to a 300-km earth orbit, the lunar ferry envisioned would travel in spiral trajectory to the moon under the power of 300-kW solar arrays and ten 30-kW Xe-ion engines; each of the solar arrays would be 12 x 61 m long. Each trip between the earth parking orbit and the moon would take about 1 year, so that a fleet of four ferries operating simultaneously could deliver 20 metric tons to a lunar base every 100 days.

Aston, Graeme↗
NASA NTRS1961

A Study of the Positions and Velocities of a Space Station and a Ferry Vehicle During Rendezvous and Return

A study is made of the families of non-thrusting ascent trajectories of a ferry vehicle during rendezvous with an orbiting body, referred to as a space station. It is shown that these trajectories may also be interpreted as descent trajectories of the ferry from the station to the earth. The rendezvous trajectories start at the end of the boost period (assumed to be 60 miles) and terminate at the station. The equations of motion are derived and results are shown for two typical orbits of the station: a 300-mile cir­cular orbit and a 100-to-500-mile elliptical orbit. Trajectories are described in terms of a rotating co­ordinate system fixed in the station and launch con­ditions are tabulated in terms of non-rotating inertial coordinates. Boundaries are given in terms of launch (at time of booster burnout) and rendezvous conditions for the example cases. The considerations used to calculate these boundaries and the significance of some of the trends are discussed.

TRAJECTORY↗
NASA NTRS1975

Results of a space shuttle vehicle ferry configuration afterbody fairing optimization study using a 140A/B 0.0405-scale model orbiter (43-0) in the Rockwell International 7.75 by 11.0 ft low speed wind tunnel (OA124)

Experimental aerodynamic investigations were conducted on a dual-strut mounted 0.0405-scale representation of the 140A/B outer mold line space shuttle orbiter vehicle. The tests, conducted from 11 Oct., 1974 through 22 Oct., 1974, were primarily to investigate aerodynamic stability and control characteristics of the space shuttle orbiter ferry configuration. Four afterbody fairing configurations and various additions to them in the form of horizontal and ventral fins strakes and other aerodynamic protuberances were tested. Base line data on the basic orbiter with MPS nozzles and bodyflap were recorded. The drag of the optimum ferry configuration was increased to the level of the basic orbiter for possible flight test configurations by the addition of two sizes of perforated speed brakes on the tail cone surface.

Houlihan, S. R.↗
NASA NTRS1977

Dynamic stability characteristics of the combination space shuttle orbiter and ferry vehicle

Subsonic forced-oscillation tests of a 0.015 scale model of the space shuttle orbiter/747 ferry vehicle were conducted in the Langley high speed 7- by 10-foot tunnel at Mach numbers of 0.2, 0.4, and 0.5 for angles of attack up to 12 deg. Tests were made of the basic 747 airplane, of the modified 747 (tip fins and struts added), of the ferry configuration, (747 plus orbiter at an incidence angle of 3 deg), and of the approach and landing test configuration (747 plus orbiter at an incidence angle of 6 deg).

Freeman, D. C., Jr.↗
NASA NTRS1973

C-5A/orbiter wind tunnel testing and analysis: Piggyback ferry

Wind tunnel testing and analytical studies of the feasibility of ferrying the NASA Shuttle Orbiter on the C-5A in a piggyback mode have been accomplished. Testing was conducted in the 8x12 foot low speed wind tunnel using an existing 0.0399 scale C-5A model in conjunction with a NASA 0.0405 scale Orbiter model. Six component force and moment data were measured over a range of pitch and yaw angles to determine lift and drag characteristics, lateral/directional stability characteristics and longitudinal and directional control powers. A description of the wind tunnel test program with a run schedule and the complete plotted data for all the test runs are presented. Initial emphasis was given to determining the effects of the Orbiter above the C-5A and the optimum location for minimum interference on C-5A characteristics. A comprehensive series of cruise configurations were tested including a range of Orbiter longitudinal and vertical locations, incidences, and afterbody fairings. Subsequently, a series of configurations were devised during the test program to determine means of recovering directional stability degradation due to Orbiter interference.

Tomlin, K. H.↗
NASA NTRS1974

Statistical analysis of flight times for space shuttle ferry flights

Markov chain and Monte Carlo analysis techniques are applied to the simulated Space Shuttle Orbiter Ferry flights to obtain statistical distributions of flight time duration between Edwards Air Force Base and Kennedy Space Center. The two methods are compared, and are found to be in excellent agreement. The flights are subjected to certain operational and meteorological requirements, or constraints, which cause eastbound and westbound trips to yield different results. Persistence of events theory is applied to the occurrence of inclement conditions to find their effect upon the statistical flight time distribution. In a sensitivity test, some of the constraints are varied to observe the corresponding changes in the results.

Graves, M. E.↗
NASA NTRS1975

Space shuttle vehicle ferry configuration afterbody fairing effects on 140A/B orbiter aerodynamic characteristics using an .0405 scale model orbiter (43-0) in the Rockwell International 7.75 x 11 ft low speed wind tunnel (OA123)

The primary test objectives were to define ferry configuration afterbody fairing effects on orbiter stability and control characteristics and to substantiate wind tunnel results. Parametric variations consisted entirely of testing different afterbody fairing contours in an effort to improve both the orbiter drag levels and lateral-directional control characteristics. The three afterbody contours that were tested consisted of the Boeing TC3 beavertail, the new Rockwell-Boeing TC4 fairing, and a modification of an existing short bumblebee fairing redesignated TC6.

Mennell, R. C.↗
NASA NTRS1977

Probabilities of good, marginal, and poor flying conditions for space shuttle ferry flights

Empirical probabilities are provided for good, marginal, and poor flying weather for ferrying the Space Shuttle Orbiter from Edwards AFB, California, to Kennedy Space Center, Florida, and from Edwards AFB to Marshall Space Flight Center, Alabama. Results are given by month for each overall route plus segments of each route. The criteria for defining a day as good, marginal, or poor and the method of computing the relative frequencies and conditional probabilities for monthly reference periods are described.

Whiting, D. M.↗
NASA NTRS1992

Pioneering scramjet developments by Antonio Ferri

The concept is summarized of a diffusive burning supersonic combustion ramjet engine (scramjet) envisioned by Antonio Ferri and some of the salient technologies are highlighted as developed by General Applied Science Labs, PIBAL, and NYU, under his direction.

Erdos, John I.↗
NASA NTRS1988

Design of an interim space rescue ferry vehicle

This paper proposes a stop-gap nonoptimum vehicle for transferring astronauts from a tumbling stranded spacecraft to a nearby rescue spacecraft. The design is limited to the use of available or 'soon-to-be' available flight-qualified hardware and consists of three major components: the manned maneuvering unit, the personnel rescue enclosure, and the apogee kick motor capture device. The apogee kick motor capture device is modified to serve as the connection between the manned maneuvering unit and the personnel rescue enclosure. The performance of this interim rescue vehicle is analyzed with NASA flight simulation software to test the feasibility of the design. Results show that the control system of the manned maneuvering unit adequately limits uncommanded rotations during all simulated maneuvers in the primary control mode but not during transverse translations in the backup control mode. Impingement of thruster plumes on the personnel rescue enclosure is shown to be of some importance in certain maneuvers. The satellite stabilization mode of the control system is found to have significant rotational-to-translational coupling that has associated adverse effects on flying qualities, making the mode undesirable for the rescue mission.

Halsell, James D., Jr.↗
NASA NTRS1961

A Study of the Positions and Velocities of a Space Station and a Ferry Vehicle During Rendezvous and Return

A study is made of the families of non-thrusting ascent trajectories during rendezvous with an orbiting space station and the descent trajectories to the earth's atmosphere. Equations of motion are derived and results are shown for two typical orbits of the station (one circular and one elliptic orbit}. Boundaries of launch (at time of booster burnout) and rendezvous conditions are given and the effects of delays in launch time are discussed.

Eggleston, John M.↗