Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FeO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Structural and Electronic Transitions in Liquid FeO Under High Pressure

Abstract FeO represents an important end‐member for planetary interiors mineralogy. However, its properties in the liquid state under high pressure are poorly constrained. Here, in situ high‐pressure and high‐temperature X‐ray diffraction experiments, ab initio simulations, and thermodynamic calculations are combined to study the local structure and density evolution of liquid FeO under extreme conditions. Our results highlight a strong shortening of the Fe‐Fe distance, particularly pronounced between ambient pressure and ∼40 GPa, possibly related with the insulator to metal transition occurring in solid FeO over a similar pressure range. Liquid density is smoothly evolving between 60 and 150 GPa from values calculated for magnetic liquid to those calculated for non‐magnetic liquid, compatibly with a continuous spin crossover in liquid FeO. The present findings support the potential decorrelation between insulator/metal transition and the high‐spin to low‐spin continuous transition, and relate the changes in the microscopic structure with macroscopic properties, such as the closure of the Fe‐FeO miscibility gap. Finally, these results are used to construct a parameterized thermal equation of state for liquid FeO providing densities up to pressure and temperature conditions expected at the Earth's core‐mantle boundary.

Morard, Guillaume↗
NASA NTRS2006

Oxygen-isotopic Compositions of Low-FeO relicts in High-FeO Host Chondrules in Acfer 094, a Type 3.0 Carbonaceous Chondrite Closely Related to CM

With one exception, the low-FeO relict olivine grains within high-FeO porphyritic chondrules in the type 3.0 Acfer 094 carbonaceous chondrite have DELTA O-17 ( = delta O-17 - 0.52 X delta O-18) values that are substantially more negative than those of the high-FeO olivine host materials. These results are similar to observations made earlier on chondrules in C03.0 chondrites and are consistent with two independent models: (1) Nebular solids evolved from low-FeO, low-DELTA O-17 compositions towards high-FeO, more positive DELTA O-17 compositions; and (2) the range of compositions resulted from the mixing of two independently formed components. The two models predict different trajectories on a DELTA O-17 vs. log Fe/Mg (olivine) diagram, but our sample set has too few values at intermediate Fe/Mg ratios to yield a definitive answer. Published data showing that Acfer 094 has higher volatile contents than CO chondrites suggest a closer link to CM chondrites. This is consistent with the high modal matrix abundance in Acfer 094 (49 vol.%). Acfer 094 may be an unaltered CM chondrite or an exceptionally matrix-rich CO chondrite. Chondrules in Acfer 094 and in CO and CM carbonaceous chondrites appear to sample the same population. Textural differences between Acfer 094 and CM chondrites are largely attributable to the high degree of hydrothermal alteration that the CM chondrites experienced in an asteroidal setting.

Rubin, Alan E.↗
NASA NTRS1987

Ubiquitous high-FeO silicates in enstatite chondrites

SEM and EMPA were used to determine the mineral contents of four EH3 chondrites. All four showed the dominant enstatite peak, Fs 0-5, with 4-8 percent of FeO-rich pyroxene with Fs 5-20. Among the 542 objects found to contain high-FeO silicates, 18 were chondrules, 381 were rimmed or unrimmed grains, and 143 were aggregates. The high-FeO silicates in these objects are very largely pyroxene with Fs 5-23. Large grains of both FeO-rich and FeO-poor silicates were found to be present in the FeO-rich chondrules. This fact, together with the absence of clasts of FeO-rich chondritic material in the EH3 chondrites, suggests that FeO-rich grains were introduced before or during chondrule formation. It is concluded that FeO-rich and FeO-poor silicates were both present in the nebular region where E chondrites originated.

Lusby, David↗
NASA NTRS2014

Inferred Variable FeO Content in Medium-sized Lunar Pyroclastic Deposits from LRO Diviner Data

Lunar pyroclastic deposits (LPDs) are low albedo features that mantle underlying terrain (Gaddis et al. 1985). They are high priority targets for science and exploration as they are believed to originate from and therefore reflect the composition of the deep lunar interior (NRC, 2011). They are also the best potential resource of oxygen out of any Apollo samples (Allen et al. 1996). Historically, LPDs have been divided into regional versus local categories (Gaddis et al. 2003). The large (>1000 km2 area) regional deposits are deeply sourced (>400 km deep) and result from fire fountaining. Small (<1000 km2) local deposits are thought to result from Vulcanian eruptions in which magma is slowly emplaced beneath the surface until enough volatiles exsolve and the high pressure causes an explosion. Bennett et al. (2013) identified a local deposit (674 km2 area) that may have resulted from both Vulcanian activity and fire fountaining. This deposit potentially represents a new intermediate class of LPDs that straddles the interface between the two formation mechanisms. The deposit also exhibits the highest inferred FeO wt.% of any known lunar glass. In this work we investigate the inferred FeO abundances of other medium-sized deposits to characterize this potential new class of deposits and understand the magnitude of variations in inferred FeO among pyroclastic deposits. We use the method of Greenhagen et al. (2010) to calculate the wavelength of the Christiansen Feature (CF) from Lunar Reconnaissance Orbiter Diviner Lunar Radiometer instrument thermal-infrared observations for four medium-sized deposits. From the CF values, we estimate each deposit's FeO abundance using the method of Allen et al. (2012). The four LPDs that we examined (Oppenheimer South, Beer, Cleomedes, and J. Herschel) all have average CF values from 8.22-8.28 microns, corresponding to FeO abundances of approx. 10-15 wt.%. All of these values are within the range and uncertainties of FeO abundances measured in Apollo samples. As previously identified, the Oppenheimer South deposit exhibits an area of enhanced CF values (8.49 microns) that, if the methods of Allen et al. (2012) can be extrapolated, correspond to a highest observed approx. 30 wt.% FeO. Moon Mineralogy Mapper near-infrared spectra indicate that this area is glass-rich as opposed to olivine-rich. While we are still investigating the nature of the high CF wavelength in Oppenheimer South, spatially-resolved observations there and (to a smaller degree) in our other study sites, shows that FeO wt.% can vary within LPDs. Thus, obtaining only the average FeO abundance over a large area may not be adequate to understand global variation. The magnitude of Oppenheimer South's CF variability, if due to actual surface variations rather than calibration artifacts or spectral mixing, could indicate that it is a unique deposit and not part of a new mid-sized class of deposits. The higher value could be a result of its location within the South Pole Aitken Basin and exsolution of more deeply sourced magma due to the thin crust there.

Bennett, K. A.↗
DOE OSTI2024

Resilience of the Aurivillius structure upon La and Cr doping in a Bi 5 Ti 3 FeO 15 multiferroic

Here, combining the experimental techniques of high-resolution X-ray diffraction, magnetometry, specific heat measurement, and X-ray photoelectron, Raman and dielectric spectroscopy techniques, we have studied the influence of La and Cr doping on the crystal structure and magnetism of the room temperature Aurivillius multiferroic Bi 5 Ti 3 FeO 15 by investigating the physical properties of (Bi 4 La)Ti 3 FeO 15 and Bi 5 Ti 3 (Fe 0.5 Cr 0.5 )O 15 . The parent (Bi 5 Ti 3 FeO 15 ) and the doped ((Bi 4 La)Ti 3 FeO 15 and Bi 5 Ti 3 (Fe 0.5 Cr 0.5 )O 15 ) compounds crystallize in the A2 1 am space group, which is confirmed through our analysis of high-resolution synchrotron X-ray diffraction data obtained on phase-pure polycrystalline powders. We determined the oxidation states of the metal atoms in the studied compounds as Fe 3+ , Ti 4+ , Cr 3+ , and La 3+ through the analysis of X-ray photoelectron spectroscopy data. The magnetic susceptibilities of the three compounds are marked by the absence of a long-range ordered ground state, but dominated by superparamagnetic clusters with dominant antiferromagnetic interactions. This signature of short-range magnetism is also seen in specific heat as a low temperature enhancement which is suppressed upon the application of external magnetic fields up to 8 T. Our dielectric spectroscopy experiments showed that the three studied compounds display similar features in the dielectric constant measured as a function of frequency. However, upon doping La at the Bi site, the width of the ferroelectric hysteresis loop increases for (Bi 4 La)Ti 3 FeO 15 compared to that of the parent compound Bi 5 Ti 3 FeO 15 , and with Cr doping, Bi 5 Ti 3 (Fe 0.5 Cr 0.5 )O 15 becomes a leaky dielectric. The resilience of the Aurivillius crystal structure towards doping of La at the Bi site and Cr at the Fe site is clearly seen in the bulk properties of magnetic susceptibility, specific heat and the average crystal structure. The relevance of changes in the local structure is evident from our Raman spectroscopy and X-ray pair distribution function studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Chemistry and P-V-T equation of state of FeO 2 H x at the base of Earth’s lower mantle and their geophysical implications

The hydrogen-absorbing ability of a mantle mineral in its structure determines the capacity of the water reservoirs hosted by the mineral. Water reservoirs at the base of Earth’s mantle directly influence the fate of water brought down by slab subduction and the seismic heterogeneity such as ultralow-velocity zones (ULVZs) at the core-mantle boundary. Pyrite-FeO 2 H x (0 ≤ x ≤ 1) presents a possibility of such reservoirs in the deep mantle. Ever since the discovery of this mineral phase, however, its chemistry at the lower mantle conditions has been debated. We conducted kinetics experiments of pyrite-FeO 2 H x dehydrogenation at 110 GPa/2100 K, 110 GPa/2300 K, and 120 GPa/2300 K and P-V-T equation of state analysis using in situ synchrotron X-ray diffraction. We found that x approaches 0.80, 0.75, and 0.79, respectively, at the above conditions. The collective P-V-T data yield K 0 = 241(13) GPa, K' = 4.2(4), dK/dT = –0.028(1) GPa/K, α 0 = 4.32(13) × 10 –5 K –1 , and α 1 = 0.31(10) × 10 –8 K –2 for the composition of x = 0.75 ± 0.04. Our first-principles calculations indicate that FeO 2 H 0.75 with a slightly distorted pyrite structure is stable at 100 GPa. These results indicate that this mineral is likely present in the deep mantle with rather a partially dehydrogenated composition than FeO 2 or FeOOH. Furthermore, the results also clarify the difference between the ULVZs originated from pyrite-FeO 2 H x and those from partial melting in terms of shear and compressional wave seismic velocity reduction ratio δlnV S /δlnV P .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ba 1−x Sr x FeO 3−δ as an improved oxygen storage material for chemical looping air separation: a computational and experimental study

Chemical looping air separation (CLAS) is a promising technology to generate oxygen-rich gas streams to enable efficient carbon dioxide capture during fossil fuel combustion or gasification. CLAS relies on the capture and release of oxygen from the atmosphere using the redox properties of an oxygen-selective solid oxide carrier. This study investigates the redox characteristics of Ba 1−x Sr x FeO 3−δ (0.0 ≤ x ≤ 0.417, 0.0 ≤ δ ≤ 0.5) using a combination of density functional theory (DFT) calculations and experimental verification using X-ray diffraction, thermogravimetric analysis, and oxygen-temperature-programmed desorption. The DFT computed energies of the Ba 1−x Sr x FeO 3−δ perovskites reveal a composition-dependent transition from hexagonal to cubic phases as the Sr-concentration or oxygen vacancy concentration increases. Oxygen vacancy formation energies of the cubic perovskites are found to be lower than those of their hexagonal counterparts. A low oxygen diffusion barrier of ∼1 eV combined with the thermodynamic preference of Ba 1−x Sr x FeO 3−δ compositions that form in a cubic phase suggests them as promising candidates for oxygen storage applications. The experimental results corroborate this finding by identifying Ba 0.75 Sr 0.25 FeO 3−δ in the cubic phase as an optimal composition offering low-temperature oxygen storage capacities comparable to that of the state-of-the-art Sr 0.75 Ca 0.25 FeO 3−δ perovskite oxygen storage material at 325 °C and 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Formation of (Rh–Fe)–FeO x Complex Sites Enables Methanol Synthesis from CO 2

Here, we addressed the challenges of designing catalysts for selective CO 2 hydrogenation by incorporating oxide Fe species onto Rh nanoparticles. Nanoscopic FeO x domains created a “reverse catalyst” structure (i.e., a metal oxide supported on a metal) that increased the density of interfacial sites compared to traditional supported catalysts. The contact between the metal nanoparticle and the oxide overlayer induced the formation of a surface Rh-Fe alloy that stabilize methoxy groups while suppressing hydrogenolysis to methane. Sites at FeO x -metal interfaces interact with CO 2 sevenfold stronger than sites on metal surfaces, show larger energy barriers to cleave the C-O bonds, and offer a barrierless pathway for hydrogenation of methoxy species to methanol. Consequently, the multifunctional sites over FeO x /Rh-Fe catalysts highlight and meet the requirements of a selective methanol catalyst: strong interaction with CO 2 to ensure high density of transition states; metal sites to activate and make hydrogen available to surface intermediates; and high energy barriers for C-O bond cleavage to form carbides. These synthesis and catalytic chemistries, demonstrated for Rh-Fe-FeO x interfaces, enable us to overcome the limitations to the design of methanol production catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

FeO and H-2O and the homogeneous accretion of the earth

Shock devolatilization recovery data for brunite (Mg(OH)2) shocked to 13 and 23 GPa are presented. These data combined with previous data for serpentine (Mg3Si2O5(OH)4) are used to constrain the minimum size terrestrial planet for which planetesimal infall will result in an impact generated water atmosphere. Assuming, in hydrous phyllosilicates, model calculations simulating the interaction of metallic iron with impact released free water on the surface of the accreting Earth were carried out. It is assumed that the reaction of water with iron in the presence of enstatite is the prime source of the terrestrial FeO component of silicates and oxides. Lower and upper bounds on the terrestrial FeO budget are based on mantle FeO content and possible incorporation of FeO in the outer core. We demonstrate that the iron water reaction would result in the absence of atmospheric/hydrospheric water, if homogeneous accretion is assumed.

Lange, M. A.↗
NASA NTRS1984

FeO and H2O and the homogeneous accretion of the earth

Shock devolatilization recovery data for brunite (Mg(OH)2) shocked to 13 and 23 GPa are presented. These data combined with previous data for serpentine (Mg3Si2O5(OH)4) are used to constrain the minimum size terrestrial planet for which planetesimal infall will result in an impact generated water atmosphere. Assuming, in hydrous phyllosilicates, model calculations simulating the interaction of metallic iron with impact released free water on the surface of the accreting earth were carried out. It is assumed that the reaction of water with iron in the presence of enstatite is the prime source of the terrestrial FeO component of silicates and oxides. Lower and upper bounds on the terrestrial FeO budget are based on mantle FeO content and possible incorporation of FeO in the outer core. We demonstrate that the iron water reaction would resuit in the absence of atmospheric/hydrospheric water, if homogeneous accretion is assumed.

Lange, M. A.↗
NASA NTRS2012

Derivation of FEO Abundances in Lunar Pyroclastic Deposits Using Diviner

Telescopic observations and orbital images of the Moon reveal at least 75 lunar pyroclastic deposits (LPDs), interpreted as the products of explosive volcanic eruptions [1]. The deposits are understood to be composed primarily of sub-millimeter beads of basaltic composition, ranging from glassy to partially-crystallized [2]. Delano [3] documented 25 distinct pyroclastic bead compositions in lunar soil samples, with a range of FeO abundances from 16.5 - 24.7 wt%. Green glasses generally have lower FeO abundances and red, yellow, and orange glasses generally have higher FeO abundances. The current study employs data from the Diviner Lunar Radiometer Experiment onboard the Lunar Reconnaissance Orbiter (LRO) to derive the FeO compositions of glasses from unsampled lunar pyroclastic deposits. The pyroclastic glasses are the deepest-sourced and most primitive basalts on the Moon [4]. Recent analyses have documented the presence of water in these glasses, demonstrating that the lunar interior is considerably more volatile-rich than previously understood [5]. Experiments have shown that the iron-rich pyroclastic glasses release the highest percentage of oxygen of any Apollo soils, making these deposits promising lunar resources [6].

Allen, Carlton C.↗
DOE OSTI2024

Porosity in Sr 1-x Ca x FeO 3-δ oxygen carriers: The role of surface area and pretreatment on storage activity

Perovskite oxides have generated interest as robust, low-temperature oxygen carrier materials for a variety of clean energy applications, including chemical looping gasification and air separations. Methods to improve O 2 desorption kinetics are vital to allow these carriers to compete economically with traditional metal oxide carriers or cryogenic separations. In this report we investigated the cumulative roles that surface area, pretreatment, and elemental composition have on the oxygen storage properties of a state-of-the-art carrier system, Sr 1-x Ca x FeO 3-δ (x = 0.20, 0.25, 0.30) synthesized using multiple methods. Porous materials synthesized by the Pechini, or citrate, method had their surface area controlled using the synthesis temperature. The high surface area of the Sr 0.7 Ca 0.3 FeO 3-δ materials is most beneficial at low operating temperatures, such as 350 and 400 °C, as their reduction rates are twice as fast as those obtained with their bulk counterparts. These effects are observed at higher operating temperatures and within a single composition, but temperature tunability using variable Ca 2+ substitution in the Sr 1-x Ca x FeO 3-δ overshadows the improvements gained from higher surface areas. Additionally, we establish that pretreatment in N2 at an elevated temperature is necessary to enhance kinetics further. For maximum efficiency, pretreatment at the synthesis temperature is suggested for the Pechini method-synthesized systems, whereas 800 °C is adequate for bulk materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Broad-range tuning of ferroelectric switching of La x Bi 1−x FeO 3 epitaxial films via digital doping using off-axis co-sputtering

To investigate the scope of ferroelectric behavior in La-substituted BiFeO 3 films, La x Bi 1−x FeO 3 epitaxial films were synthesized using off-axis co-sputtering on SrTiO 3 (001) and DyScO 3 (110) substrates with a SrRuO 3 bottom electrode layer. A digital-doping deposition method was used to enable precise control and continuous tuning of La concentration in high-quality LaxBi 1−x FeO 3 films across a wide range of x = 0.05–0.60, which was systematically investigated using piezoresponse force microscopy. Robust and reversible out-of-plane ferroelectric switching has been observed up to x = 0.35, while films with x ≥ 0.37 exhibit no measurable ferroelectric behavior, indicating a sharp ferroelectric-to-paraelectric phase transition between x = 0.35 and 0.37. This represents the highest reported La concentration in LaxBi 1−x FeO 3 films that retains ferroelectric ordering, highlighting opportunities to engineer ferroelectric and multiferroic properties in complex oxide heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

PBE-GGA predicts the B8↔B2 phase boundary of FeO at Earth’s core conditions

FeO is a crucial component of the Earth’s core, and its thermodynamic properties are essential to developing more accurate core models. It is also a notorious correlated insulator in the NaCl-type (B1) phase at ambient conditions. It undergoes two polymorphic transitions at 300 K before it becomes metallic in the NiAs-type (B8) structure at ~100 GPa. Although its phase diagram is not fully mapped, it is well established that the B8 phase transforms to the CsCl-type (B2) phase at core pressures and temperatures. Here, we report a successful ab initio calculation of the B8↔B2 phase boundary in FeO at Earth’s core pressures. We show that fully anharmonic free energies computed with the Perdew–Burke–Ernzerhof-generalized gradient approximation coupled with thermal electronic excitations reproduce the experimental phase boundary within uncertainties at P > 255 GPa, including the largely negative Clapeyron slope of –52 MPa/K. This study validates the applicability of a standard density functional theory functional to FeO under Earth’s core conditions and demonstrates the theoretical framework that enables complex predictive studies of this region.

58 GEOSCIENCES↗
DOE OSTI2022

An Investigation of the Electrochemical Activity of (Ba/Sr)FeO 3-y Anodes

FeO x , SrFeO 3-y (SF), and Ba 0.5 Sr 0.5 FeO 3–y (BSF) were studied for application as fuel oxidation catalysts in solid oxide fuel cells (SOFC) anodes. Electrodes were prepared by impregnation into porous yttria-stabilized zirconia (YSZ), with La 0.3 Sr 0.7 TiO 3–y (LST) added for electronic conductivity. The electrode impedances decreased dramatically upon addition of SF and BSF and much less when only SrO or FeO x were added. Temperature Programmed Desorption (TPD) of O 2 from oxidized BSF showed O 2 desorbing between 200 °C and 700 °C, while no O 2 desorbed from Fe 2 O 3 below 900 °C. The results, together with thermodynamic analysis, suggest that stabilization of Fe +4 in the perovskite lattice plays an important role in enhancing the catalytic activity of SF and BSF by providing access to a Fe 3+ /Fe 4+ redox couple that can accept oxygen anions from the yttria-stabilized zirconia (YSZ) electrolyte. Oxygen is weakly bound to these sites facilitating its reaction with adsorbed H 2 .

Electrochemistry↗