Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fe3C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Engineering Fe–Fe3C@Fe–N–C Active Sites and Hybrid Structures from Dual Metal–Organic Frameworks for Oxygen Reduction Reaction in H2–O2 Fuel Cell and Li–O2 Battery

Dual metal-organic frameworks (MOFs, i.e., MIL-100(Fe) and ZIF-8) are thermally converted into Fe-Fe3C-embedded Fe-N-codoped carbon as platinum group metal (PGM)-free oxygen reduction reaction (ORR) electrocatalysts. Pyrolysis enables imidazolate in ZIF-8 rearranged into highly N-doped carbon, while Fe from MIL-100(Fe) into N-ligated atomic sites concurrently with a few Fe-Fe3C nanoparticles. Upon precise control of MOF compositions, the optimal catalyst is highly active for the ORR in half-cells (0.88 V in base and 0.79 V versus RHE in acid in half-wave potential), a proton exchange membrane fuel cell (0.76 W cm(-2) in peak power density) and an aprotic Li-O-2 battery (8749 mAh g(-1) in discharge capacity), representing a state-of-the-art PGM-free ORR catalyst. In the material, amorphous carbon with partial graphitization ensures high active site exposure and fast charge transfer simultaneously. Macropores facilitate mass transport to the catalyst surface, followed by oxygen penetration in micropores to reach the infiltrated active sites. Further modeling simulations shed light on the true Fe-Fe3C contribution to the catalyst performance, suggesting Fe3C enhances oxygen affinity, while metallic Fe promotes *OH desorption as the rate-determining step at the nearby Fe-N-C sites. These findings demonstrate MOFs as model system for rational design of electrocatalyst for energy-based functional applications.

battery↗

Materials Data on Fe3C by Materials Project

Fe3C is Cementite structured and crystallizes in the orthorhombic Pnma space group. The structure is two-dimensional and consists of two Fe3C sheets oriented in the (0, 0, 1) direction. there are two inequivalent Fe sites. In the first Fe site, Fe is bonded in a bent 150 degrees geometry to two equivalent C atoms. There is one shorter (1.96 Å) and one longer (1.99 Å) Fe–C bond length. In the second Fe site, Fe is bonded in a 2-coordinate geometry to two equivalent C atoms. Both Fe–C bond lengths are 2.00 Å. C is bonded in a 6-coordinate geometry to six Fe atoms.

36 MATERIALS SCIENCE↗

Materials Data on Fe3C by Materials Project

Fe3C crystallizes in the orthorhombic Pnma space group. The structure is two-dimensional and consists of two Fe3C sheets oriented in the (0, 0, 1) direction. there are two inequivalent Fe sites. In the first Fe site, Fe is bonded in a square co-planar geometry to four equivalent C atoms. There are a spread of Fe–C bond distances ranging from 1.95–2.02 Å. In the second Fe site, Fe is bonded in a single-bond geometry to one C atom. The Fe–C bond length is 1.90 Å. C is bonded to six Fe atoms to form a mixture of edge and corner-sharing CFe6 octahedra. The corner-sharing octahedra tilt angles range from 1–2°.

36 MATERIALS SCIENCE↗

Materials Data on Fe3C by Materials Project

Fe3C is Upper Bainite structured and crystallizes in the hexagonal P6_322 space group. The structure is three-dimensional. Fe is bonded in a bent 120 degrees geometry to two equivalent C atoms. Both Fe–C bond lengths are 1.92 Å. C is bonded to six equivalent Fe atoms to form corner-sharing CFe6 octahedra. The corner-sharing octahedral tilt angles are 52°.

36 MATERIALS SCIENCE↗

Materials Data on Fe3C by Materials Project

Fe3C is Upper Bainite-like structured and crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional. there are two inequivalent Fe sites. In the first Fe site, Fe is bonded in a distorted bent 120 degrees geometry to two equivalent C atoms. There is one shorter (1.90 Å) and one longer (1.91 Å) Fe–C bond length. In the second Fe site, Fe is bonded in a distorted bent 120 degrees geometry to two equivalent C atoms. Both Fe–C bond lengths are 1.93 Å. C is bonded to six Fe atoms to form corner-sharing CFe6 octahedra. The corner-sharing octahedra tilt angles range from 48–51°.

36 MATERIALS SCIENCE↗

Materials Data on Fe3C by Materials Project

Fe3C crystallizes in the tetragonal I-4 space group. The structure is three-dimensional. there are three inequivalent Fe sites. In the first Fe site, Fe is bonded to four equivalent C atoms to form a mixture of distorted edge and corner-sharing FeC4 tetrahedra. There are two shorter (2.13 Å) and two longer (2.19 Å) Fe–C bond lengths. In the second Fe site, Fe is bonded in a distorted water-like geometry to two equivalent C atoms. Both Fe–C bond lengths are 2.13 Å. In the third Fe site, Fe is bonded in a bent 120 degrees geometry to two equivalent C atoms. Both Fe–C bond lengths are 2.02 Å. C is bonded in a 8-coordinate geometry to eight Fe atoms.

36 MATERIALS SCIENCE↗

First principles calculation of finite temperature magnetism in Fe and Fe3C

Density functional calculations have proven to be a useful tool in the study of ground state properties of many materials. The investigation of finite temperature magnetism, on the other hand, has to rely usually on the usage of empirical models that allow the large number of evaluations of the systems Hamiltonian that are required to obtain the phase space sampling needed to obtain the free energy, specific heat, magnetization, susceptibility, and other quantities as function of temperature. We have demonstrated a solution to this problem that harnesses the computational power of today s large massively parallel computers by combining a classical Wang Landau Monte-Carlo calculation [F. Wang and D. P. Landau, Phys. Rev. Lett. 86, 2050 (2001)] with our first principles multiple scattering electronic structure code [Y. Wang et al., Phys. Rev. Lett. 75, 2867 (1995)] that allows the energy calculation of constrained magnetic states [M. Eisenbach et al., Proceedings of the Conference on High Performance Computing, Networking, Storage and Analysis (ACM, New York, 2009)]. We present our calculations of finite temperature properties of Fe and Fe3C using this approach and we find the Curie temperatures to be 980 and 425K, respectively.

36 MATERIALS SCIENCE↗

Materials Data on Fe3C by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Fe11MoC4 by Materials Project

MoFe5C2(Fe3C)2 crystallizes in the monoclinic Pm space group. The structure is two-dimensional and consists of one Fe3C sheet oriented in the (0, 1, 0) direction and one MoFe5C2 sheet oriented in the (0, 1, 0) direction. In the Fe3C sheet, there are four inequivalent Fe sites. In the first Fe site, Fe is bonded in a single-bond geometry to one C atom. The Fe–C bond length is 1.79 Å. In the second Fe site, Fe is bonded in a single-bond geometry to one C atom. The Fe–C bond length is 1.88 Å. In the third Fe site, Fe is bonded in a square co-planar geometry to four C atoms. There are two shorter (2.01 Å) and two longer (2.04 Å) Fe–C bond lengths. In the fourth Fe site, Fe is bonded in a square co-planar geometry to four C atoms. There are a spread of Fe–C bond distances ranging from 1.99–2.04 Å. There are two inequivalent C sites. In the first C site, C is bonded to six Fe atoms to form a mixture of corner and edge-sharing CFe6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. In the second C site, C is bonded to six Fe atoms to form a mixture of corner and edge-sharing CFe6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. In the MoFe5C2 sheet, Mo is bonded in a square co-planar geometry to four C atoms. There are a spread of Mo–C bond distances ranging from 2.10–2.12 Å. There are three inequivalent Fe sites. In the first Fe site, Fe is bonded in a single-bond geometry to one C atom. The Fe–C bond length is 1.89 Å. In the second Fe site, Fe is bonded in a single-bond geometry to one C atom. The Fe–C bond length is 1.90 Å. In the third Fe site, Fe is bonded in a square co-planar geometry to four C atoms. There are a spread of Fe–C bond distances ranging from 1.92–1.95 Å. There are two inequivalent C sites. In the first C site, C is bonded to two equivalent Mo and four Fe atoms to form a mixture of corner and edge-sharing CFe4Mo2 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. In the second C site, C is bonded to two equivalent Mo and four Fe atoms to form a mixture of corner and edge-sharing CFe4Mo2 octahedra. The corner-sharing octahedra tilt angles range from 0–1°.

36 MATERIALS SCIENCE↗

Highly efficient Cu-decorated iron oxide nanocatalyst for low pressure CO2 conversion

We report a nanoparticulate iron oxide based catalyst for CO2 conversion with high efficiency at low pressures and on the effect of the presence of copper on the catalyst’s restructuring and its catalytic performance. In situ X-ray scattering reveals the restructuring of the catalyst at the nanometer scale. In situ X-ray absorption near edge structure (XANES) shows the evolution of the composition and oxidation state of the iron and copper components under reaction conditions along with the promotional effect of copper on the chemical transformation of the iron component. X-ray diffraction (XRD), XANES and Raman spectroscopy proved that the starting nanocatalyst is composed of iron oxides differing in chemical nature (α-Fe2O3, Fe3O4, FeO(OH)) and dimensionality, while the catalyst after CO2 conversion was identified as a mixture of α-Fe, Fe3C, and traces of Fe5C2. The significant increase of the rate CO2 is turned over in the presence of copper nanoparticles indicates that Cu nanoparticles activate hydrogen, which after spilling over to the neighbouring iron sites, facilitate a more efficient conversion of carbon dioxide.

Benzene↗

Laboratory infrared spectra of predicted condensates in carbon-rich stars

Laboratory spectra and mass absorption coefficients of MgS, CaS, FeS, SiS2, FeS2, Fe3C, and a commercial iron carbide are presented over the wavelength range 125-15 microns. These spectra confirm that MgS is the most likely source of the unidentified 30-micron emission in carbon-rich sources and that FeS, Fe3C, and 'iron carbide' cannot be responsible for this feature although they could contribute to the continuum in this region. CaS and FeS2 may contribute to the 30-micron feature; however, both higher resolution and higher precision astronomical observations are needed before their presence can be established. SiS2 has a peak near 22 microns and therefore cannot be a significant component of the dust in such regions.

Nuth, J. A.↗

Experimental constraints on the sound velocities of cementite Fe 3 C to core pressures

Sound velocities of cementite Fe 3 C have been measured up to 1.5 Mbar and at 300 K in a diamond anvil cell using the nuclear resonant inelastic X-ray scattering (NRIXS) technique. From the partial phonon density of states (pDOS) and equation of state (EOS) of Fe 3 C, we derived its elastic parameters including shear modulus, compressional (V-p) and shear-wave (V-s) velocities to core pressures. A pressure-induced spin-pairing transition in the powdered Fe3C sample was found to occur gradually between 10 and 50 GPa by the X-ray Emission Spectroscopy (XES) measurements. Following the completion of the spin-pairing transition, the V p and V s of low-spin Fe 3 C increased with pressure at a markedly lower rate than its high-spin counterpart. Our results suggest that the incorporation of carbon in solid iron to form iron carbide phases, Fe 3 C and Fe 7 C 3 , could effectively lower the V s but respectively raise the Poisson's ratio by 0.05 and 0.07 to approach the seismically observed values for the Earth's inner core. In conclusion, the comparison with the preliminary reference Earth model (PREM) implies that an inner core composition containing iron and its carbon-rich alloys can satisfactorily explain the observed seismic properties of the inner core.

58 GEOSCIENCES↗

Searching for high magnetization density in bulk Fe: the new metastable Fe-6 phase

We report the discovery of a new allotrope of iron by first principles calculations. This phase has Pmn2(1) symmetry, a six-atom unit cell (hence the name Fe-6), and the highest magnetization density (M-s) among all the known crystalline phases of iron. Obtained from the structural optimizations of the Fe3C-cementite crystal upon carbon removal, Pmn2(1) Fe-6 is shown to result from the stabilization of a ferromagnetic FCC phase, further strained along the Bain path. Although metastable from 0 to 50 GPa, the new phase is more stable at low pressures than the other well-known HCP and FCC allotropes and smoothly transforms into the FCC phase under compression. If stabilized to room temperature, for example, by interstitial impurities, Fe-6 could become the basis material for high M-s rare-earth-free permament magnets and high-impact applications such as light-weight electric engine rotors or high-density recording media. The new phase could also be key to explaining the enigmatic high M-s of Fe16N2, which is currently attracting intense research activity.

Umemoto, K↗