SEARCH · Engineering Papers

Results for “FREQUENCY DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Resilient Distributed Frequency Regulation of Renewable Generators under Communication Interruptions

Modern power systems (MPSs) face significant challenges due to the high penetration of renewable energy sources (RESs) and new types of loads such as electric vehicles (EVs). Traditional load frequency control (LFC) methods struggle with the intermittent, stochastic nature of RESs, the near-zero inertia of power-electronics-based generators, and the mobility of controllable loads and battery systems. This paper introduces a novel resilient distributed frequency regulation method to address these issues. The proposed method employs a state space model to represent the dynamic behavior of participating power sources while accounting for stochastic switching processes to model structural and parameter variations caused by disruptions such as generator connection/disconnection, communication interruptions, and physical faults. By integrating these dynamic and stochastic components, the method treats power grids as a comprehensive stochastic hybrid system. Our method enhances conventional frequency control by incorporating local stability control, neighborhood control decoupling, and coordination feedback. Theoretical analyses establish the stability, convergence, and resilience of the proposed method, and its effectiveness is validated through case studies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2025

2032 and 2036 risk enhancement from NEOs in the Taurid stream: Is there a significant coherent component to impact risk?

Impact risk is normally quantified by summing the product of the probability of an event and some measure of its consequences over the set of all possible events. The probability factor is considered to be more objective and is based on the size frequency distribution of Near Earth objects (NEOs) and an implicit assumption of randomness, which can be described as “stochastic risk”. Impact frequency does change with time, however, and there have been episodes in the deep geological past when the flux has been much higher. The hypothesis of “coherent catastrophism” suggests large variations on shorter timescales. It postulates the existence of a “Taurid resonant swarm” (TRS) of debris associated with Comet Encke that is stabilized by Jupiter and in a 7:2 resonance with it. The hypothetical cluster orbits in the broad Taurid stream, which crosses Earth's orbit twice a year at its nodes. Whereas the most extreme and fanciful versions of coherent catastrophism in recent geologic history have been comprehensively refuted, the possibility of a significant component of coherent (time-dependent) risk, associated with non-random correlated events, remains. This paper incorporates recently published data from observational campaigns associated with the Taurid stream. There is no evidence for objects in the Taurid stream that are above the global catastrophe threshold, but the possibility of a few large objects and a significant population of objects the size of the Chelyabinsk or Tunguska bodies has not been eliminated. Eyewitness accounts and comparison of airburst models to ground truth suggest that the Tunguska object was a Beta Taurid. The Tunguska event is probably an outlier when compared to the size frequency distributions under stochastic assumptions, but if there is a significant coherent component it may be representative of events that take place far more frequently, and risk assessments may have underestimated the contribution from airbursts. If so, the Earth will experience increased risk from objects this size, peaking in November 2032 and June 2036. We recommend targeted survey campaigns during these hypothetical TRS node crossings to quantify the population, search for potentially hazardous objects, and identify imminent impactors.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Hot or Not? An Evaluation of Methods for Identifying Hot Moments of Nitrous Oxide Emissions From Soils

Abstract Effectively quantifying hot moments of nitrous oxide (N 2 O) emissions from agricultural soils is critical for managing this potent greenhouse gas. However, we are challenged by a lack of standard approaches for identifying hot moments, including (a) determining thresholds above which emissions are considered hot moments, and (b) considering seasonal variation in the magnitude and frequency distribution of net N 2 O fluxes. We used one year of hourly N 2 O flux measurements from 16 autochambers that varied in flux magnitude and frequency distribution in a conventionally tilled maize field in central Illinois, USA, to compare three approaches to identify hot moment thresholds: standard deviations (SD) above the mean, 1.5x the interquartile range (IQR), and isolation forest (IF) identification of anomalous values. We also compared these approaches on seasonally subdivided data (early, late, and non‐growing seasons) versus the whole year. Our analyses revealed that 1.5x IQR method best identified N 2 O hot moments. In contrast, using 2 or 4 SD both yielded hot moment threshold values too high, and IF yielded threshold values too low, leading to missed N 2 O hot moments or low net N 2 O fluxes mischaracterized as hot moments, respectively. Furthermore, seasonally subdividing the data set not only facilitated identification of smaller hot moments in the late‐ and non‐growing seasons when N 2 O hot moments were generally smaller but it also increased hot moment threshold values in the early growing season when N 2 O hot moments were larger. Consequently, of the methods evaluated here, we recommend using the 1.5x IQR method on whole year data sets to identify N 2 O hot moments.

Stuchiner, Emily R. [Institute for Sustainability,↗

DOE OSTI2025

Urban morphology from a landscape perspective: How building morphology distribution land models (BMDLM) emulate pattern and process

Urban form (e.g., building morphology such as height or footprint) can be used to predict environmental footprints, such as energy/water consumption and carbon emissions. Although progress has been made in predicting building characteristics to fill gaps in observation or derive 3-D representations, the relationships between morphology and other variables such as land use and population are poorly understood. Understanding these relationships may enable projections for how cities will evolve with landscapes in the future. A suite of random forest models, the Building Morphology Distribution Land Models (BMDLM), was developed to determine how well building morphology for two distinct statistical measures (central tendency and frequency) can be predicted using land use (e.g., zoning) and population at different resolutions. Clark County, Nevada and Los Angeles County, California are explored as case studies. Generally, 1-km models outperformed 30-m models. Frequency distribution models had the best performance, especially in LA County. Frequency models significantly outperformed spatial autocorrelative models using inverse distance weighting (IDW). BMDLM offers a new take on modeling urban form in which generalized landscape patterns are characterized to understand the influence of population and zoning on urban development, as described by urban scaling theory.

Sturtevant, Jillian [Baylor Univ., Waco, TX (Unite↗

DOE OSTI2025

Distributed Fiber Optic Sensing for in-well hydraulic fracture monitoring

This study presents the results from in-well hydraulic fracture monitoring within a horizontal well in an unconventional reservoir utilizing Distributed Fiber Optic Sensing (DFOS). An in-house-developed Brillouin-based Distributed Strain Sensing (DSS) interrogator was deployed to obtain strain measurements, complemented by a commercial Raman-based Distributed Temperature Sensing (DTS) interrogator for temperature measurements and a commercial Rayleigh-based Low-Frequency Distributed Acoustic Sensing (LF-DAS) interrogator for strain-rate measurements. Examined over a ten-day period, the spatio-temporal distribution of temperature-compensated strain obtained from DSS and DTS revealed distinct signatures of the multi-stage hydraulic fracturing process. These signatures were analyzed with respect to fracture width growth and closure, residual strain effects, and fracture conductivity near the wellbore. Fracture widths within the fracture zone were estimated for individual stages. The findings were assessed with LF-DAS measurements for further evaluation. This work integrates DFOS-measured strain, temperature, and strain-rate data for monitoring in-well hydraulic fracturing, with the goal of supporting future studies in interpreting DFOS measurements for improved understanding of hydraulic fracturing in unconventional reservoirs.

58 GEOSCIENCES↗

DOE OSTI2025

The Short Life of Upvalley Wind in a High‐Altitude Valley in the Colorado Rocky Mountains

Thermally driven upvalley (UV) wind in the upper East River Valley in the Colorado Rocky Mountains often unexpectedly stops in midmorning and reverses back to downvalley (DV) wind. We use a comprehensive observational data set for a nearly two‐year long period to analyze the wind system and boundary layer evolution in this high‐altitude valley and determine the reason for this early wind reversal. Days with short UV wind predominantly occur during the warm season when the valley floor is free of snow and the convective boundary layer (CBL) grows well above the height of the surrounding ridges. UV wind persists throughout the day only on a few days during the warm season. We link differences in valley wind evolution to wind direction at upper levels at and above ridge height and propose forced channeling mechanisms to describe coupling between valley and upper‐level wind when the CBL grows above ridge height. The frequency distribution of upper‐level wind direction is such that channeling in the DV direction is favored, which explains the predominance of days with short UV wind. The deep CBL is supported by the presence of a deep weakly stably stratified residual layer with high aerosol content, which is regularly present over the mountain range during the warm season. On days when the CBL does not grow above ridge height, for example, when the valley floor is covered by snow, thermally driven UV wind is able to persist throughout the day independent of upper‐level wind direction.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Electron density profile and associated fluctuation measurements using a microwave reflectometry diagnostic on Helically Symmetric eXperiment (HSX)

Abstract A dual-band frequency-modulated reflectometry is employed on the Helically Symmetric eXperiment (HSX) stellarator. This system equips a fast PIN switch to alternate the frequency source between two voltage-controlled oscillators, providing an operational frequency range from 14.5 GHz to 25.5 GHz. A monostatic antenna geometry and an ellipsoidal mirror are implemented in the vessel of HSX, where the polarization of the transmitted microwave can be switched between O- and X-mode to accommodate the magnetic field and plasma density. Although the original system was designed for density fluctuation measurement, significant efforts have been undertaken to improve the system performance and to realize the density profile inversion. Recent improvements of the system reported here include calibration of the dispersion in the transmission line, optimization of the waveform, and implementation of the Choi-Williams time–frequency distribution for spectral analysis. In this paper, we present the optimization of the reflectometry system along with first experimental measurements of the density profile and observations of fluctuations during gas puffing experiments.

Han, X. (ORCID:0000000184986433)↗

DOE OSTI2025

Quantitative Assessment of Parent Well Effect on Hydraulic Fracture Propagation at HFTS2: Insights from Cross-Well Strain Measurements and Microseismic Data

Understanding fracture propagation behavior is essential for optimizing hydraulic fracturing in unconventional reservoirs. This study demonstrates the value of integrating Low-Frequency Distributed Acoustic Sensing (LF-DAS) and microseismic data, which together provide a more complete picture of fracture growth. Using data from Hydraulic Fracturing Test Site 2 (HFTS2), we identify stress changes in depletion zones induced by parent wells as a key factor influencing fracture propagation. This result is shown by new measurements of in-situ fracture propagation velocity and fracture-hit volume (fluid volume at fracture hit?) from LF-DAS and event density from microseismic. These findings highlight the importance of considering parent well effects, well spacing, and stimulation sequencing in completion design to improve reservoir development and production efficiency.

depletion zones↗

DOE OSTI2025

Evaluating Short-warning Mitigation via Intentional Robust Disruption of a Hypothetical Impact of Asteroid 2023 NT1

We investigate various short-warning mitigation scenarios via fragmentation for a hypothetical impact of asteroid 2023 NT1, a near-Earth object (NEO) that was discovered on 2023 July 15, two days after its closest approach to Earth on July 13. The asteroid passed by Earth within ∼0.25 lunar distances, with a closest approach of ∼1 × 10 5 km and a velocity of 11.27 km s −1 . Its size remains largely uncertain, with an estimated diameter range of 26–58 m and a most probable estimate of 34 m (JPL Sentry, 2023 September 15; weighted by the NEO size frequency distribution). If 2023 NT1 had collided with Earth, it could have caused significant local damage. Assuming a spherical asteroid with a diameter of 34 m, uniform density of 2.6 g cm −3 , and impact velocity of 15.59 km s −1 , a collision would have yielded an estimated impact energy of ∼1.5 Mt, approximately 3 times the energy of the Chelyabinsk airburst in 2013. We analyze the effectiveness of mitigation via intentional robust disruption for objects similar to 2023 NT1. We utilize Pulverize It (PI), a NASA Innovative Advanced Concepts study of planetary defense via fragmentation, to model potential mitigation scenarios through simulations of hypervelocity asteroid disruption and atmospheric ground effects in the case of a terminal defense mode. Simulations suggest that PI is an effective multimodal approach for planetary defense that can operate in extremely short interdiction modes, in addition to long interdiction timescales with extended warning. Our simulations support the proposition that threats like 2023 NT1 can be effectively mitigated with intercepts of 1 day (or less) prior to impact, yielding minimal to no ground damage.

Asteroids↗

DOE OSTI2025

The Cosmic Evolution of C IV Absorbers at 1.4 < z < 4.5: Insights from 100,000 Systems in DESI Quasars

We present the largest catalog to date of triply ionized carbon (C IV ) absorbers detected in quasar spectra from the Dark Energy Spectroscopic Instrument. Using an automated matched-kernel convolution method with adaptive signal-to-noise thresholds, we identify 101,487 C IV systems in the redshift range 1.4 < z < 4.5 from 300,637 quasar spectra. Completeness is estimated via Monte Carlo simulations, and the catalog is 50% complete at EW C IV ≥ 0.4 Å. The differential equivalent width frequency distribution declines exponentially and shows weak redshift evolution. The absorber incidence per unit comoving path increases by a factor of 2–5 from z ≈ 4.5 to z ≈ 1.4, with stronger redshift evolution for strong systems. Using column densities derived from the apparent optical depth method, we constrain the cosmic mass density of C IV , Ω C IV , which increases by a factor of ∼3.8 from (0.82 ± 0.05) × 10 −8 at z ≈ 4.5 to (3.16 ± 0.2) × 10 −8 at z ≈ 1.4. From Ω C IV , we estimate a lower limit on intergalactic medium metallicity ${\mathrm{log}}({Z}_{{\rm{IGM}}}/{Z}_{\odot })\gtrsim -3.25$ at z ∼ 2.3, with a smooth decline at higher redshifts. These trends trace the cosmic star formation history and He II photoheating rate, suggesting a link between C IV enrichment, star formation, and UV background over ∼3 Gyr. The catalog also provides a critical resource for future studies connecting circumgalactic metals to galaxy evolution, especially near cosmic noon.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Oversizing and Part-Load Problems

Oversizing, the common engineering practice of specifying devices with capacity exceeding the actual load requirement, is a widespread practice across virtually all building technologies end-use categories, including HVAC, electrical systems, lighting, appliances, and plug loads. This practice, driven by factors like design uncertainty, institutional pressures, and risk aversion, results in wasted capital investment, control difficulties, and excessive energy consumption due to inefficient part-load operation. Part-load operation, where devices run below maximum capacity, is the dominant operating mode in most energy systems and presents a complex design challenge. Solutions to match output to load fall into three broad categories: constraining the output, adjusting the device’s internal behavior, and linking output to energy storage or other waste-heat reuse applications. The energy implications of part-load are critical, as efficiency often drops sharply as load decreases across a wide diversity of devices. To quantify the extent of this problem, we derive a dimensionless Part-Load Metric (PLM) based on device efficiency and its frequency distribution of operating hours at various output levels. The PLM quantifies the deviation of a device's actual efficiency from its maximum design efficiency. This metric also serves as a measure of "capital inefficiency," enabling engineers to compare the impact of different part-load solutions and providing a unified framework for evaluating performance across various devices and systems.

Meier, Alan↗

DOE OSTI2025

Investigating the Impact of Temporal and Directional Traffic Distribution on Crash Frequencies

Safety Performance Functions (SPFs) are mathematical models that establish relationships between the frequency of various crash types and site-specific characteristics, serving as essential tools for traffic safety analysis and roadway design. Traditional SPFs, however, often overlook the temporal fluctuations in traffic flow (such as peak-hour surges) and directional imbalances between opposing traffic streams. These traffic patterns can exacerbate congestion, disrupt driver behavior, and create unexpected conflict points, potentially leading to increased crash frequencies and more severe accidents. In light of this gap, this study aims to explore the potential of incorporating K-factors (representing peak-hour traffic proportions) and D-factors (reflecting the imbalance of directional traffic) into the development of SPFs to assess whether these factors can effectively represent the impact of temporal and spatial traffic distribution on roadway safety. Using crash data from Pennsylvania urban-suburban collector roadways, it is found that the D-factor plays a significant role in predicting the frequency of total crashes, fatal + injury crashes, and angle crashes, with positive coefficient signs indicating that higher directional imbalances correspond to increased crash risks. Similarly, the K-factor emerges as a critical predictor for fatal + injury crashes and rear-end crashes, with negative coefficients suggesting that a more pronounced traffic peak is associated with a reduction in expected crash frequencies. These results highlight the importance of accounting for uneven traffic distribution in both time and direction when developing SPFs, offering deeper insights into crash patterns and supporting more effective safety interventions and roadway designs.

Xu, Guanhao [ORNL] (ORCID:0000000214326357)↗

DOE OSTI2026

Distributed optimization and control for autonomous distributed energy resource power dispatch and frequency regulation considering communication failures

Distributed energy resources (DERs) can significantly enhance grid flexibility by supplying power and secondary frequency regulation (SFR) services. Yet, their large number and dispersed nature limit the effectiveness of traditional centralized power dispatch and frequency control schemes, and expose the system to single-point communication failures. This paper presents a unified distributed optimization and control framework for DER power dispatch and SFR provision. A transmission-loss-aware distributed direct current optimal power flow is first formulated to optimize DER power dispatch and reserve scheduling. On top of this, a fully distributed control scheme for DER autonomous SFR provision is developed to allocate automatic generation control signals cost-effectively while ensuring robustness to communication link disruptions. The framework is validated on IEEE 14-bus and 39-bus transmission systems with large-scale distribution feeders using transmission-distribution dynamic co-simulation, demonstrating reliable and autonomous DER power dispatch and SFR provision under diverse operating conditions and communication contingencies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Utah FORGE 6-3712: Probabilistic Estimation of Seismic Response Using Physics-Informed Recurrent Neural Networks - 2024 Annual Workshop Presentation

This is a presentation on the Probabilistic Estimation of Seismic Response Using Physics-Informed Recurrent Neural Networks by GTC Analytics, presented by Jesse Williams. This video slide presentation discusses the development of machine learning-based predictive tools to estimate the magnitude-frequency response of stimulation-induced seismicity. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 15, 2024.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Quantum nonlocal modulation cancelation with distributed clocks

We demonstrate nonlocal modulation of entangled photons with truly distributed radio frequency (RF) clocks. Leveraging a custom radio-over-fiber (RFoF) system characterized via classical spectral interference, we validate its effectiveness for quantum networking by multiplexing the RFoF clock with one photon from a frequency-bin-entangled pair and distributing the coexisting quantum-classical signals over fiber. Phase modulation of the two photons reveals nonlocal correlations in excellent agreement with theory: in-phase modulation produces additional sidebands in the joint spectral intensity, while out-of-phase modulation is nonlocally canceled. Our simple, feedback-free design attains subpicosecond synchronization—namely, drift less than ~0.5 ps in a 5.5 km fiber over 30 min (fractionally only ~2×10 -8 of the total fiber delay)—and should facilitate frequency-encoded quantum networking protocols such as high-dimensional quantum key distribution and entanglement swapping, unlocking frequency-bin qubits for practical quantum communications in deployed metropolitan-scale networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2026

Joint scheduling of energy, fast and primary frequency response reserves in integrated transmission–distribution networks

Inverter-based distributed energy resources (DERs) connected to distribution networks (DNs) can provide fast frequency support, but their reserve deliverability depends on feeder constraints and differs from synchronous primary frequency response (PFR). Existing transmission–distribution coordination studies usually treat reserve generically or neglect feeder-level feasibility, while frequency-security scheduling studies rarely represent distribution feeders explicitly. This paper develops a bi-level day-ahead scheduling framework for integrated transmission–distribution networks that jointly clears energy, transmission-side PFR, and distribution-side fast frequency response (FFR) under exogenous hourly inertia and largest-loss inputs from an external unit commitment (UC) schedule. The transmission problem is modeled with DC-optimal power flow (OPF) and closed-form second-order cone (SOC) frequency-security constraints, whereas each DN is represented by a reserve-aware branch-flow AC-OPF so that scheduled fast reserves remain deliverable during activation. The bi-level problem is reformulated through Karush–Kuhn–Tucker (KKT) conditions into a mixed-integer SOC program, and a penalty term is used to tighten the distribution-network relaxation. In the reduced test system, lower exogenous inertia increased the required primary response from 179.64 MW to 191.08 MW, distribution-side fast response reduced total frequency-response procurement by up to 4.9%, and neglecting distribution constraints overstated the combined distribution-side energy and reserve award by up to 18%. In the expanded study, the largest case was solved in 2.02 s with a 0.00% optimality gap. Time-domain simulations kept the frequency nadir above 59.0 Hz in all tested hours. These results demonstrate the value of fast-response modeling and distribution-feasible reserve delivery in coordinated market clearing.

Noh, Seung-Gil↗

DOE OSTI2026

Characterizing core and edge turbulence regimes with fluctuation imaging diagnostics in Wendelstein 7-X

Two density fluctuation imaging systems, phase contrast imaging (PCI) and gas puff imaging (GPI) measure spatially resolved density fluctuations with high time resolution throughout the core plasma (PCI) and in the scrape-off layer (GPI) of the Wendelstein 7-X (W7-X) stellarator. Both systems combined give a comprehensive overview of overall fluctuation levels, spectral properties such as their distribution in frequency and wavenumber space as well as their spatial distribution. These tools are used to assess changes in density turbulence in three representative discharges that transition into stable divertor detachment by different strategies (impurity seeding, density ramping and power starvation). Several general trends are identified when the radiated power fraction is systematically increased: In the plasma edge, the line emission observed by GPI shifts radially inward with a drop in electron temperature, and normalized intensity fluctuation profiles follow this inward shift. Skewness and kurtosis of these edge fluctuations are reduced, indicating a reduction of large intermittent transport events, and poloidal phase velocities decrease in magnitude. These observations are consistent with a reduced power input into the plasma edge and a general reduction of turbulent activity. Core density fluctuation levels remain nearly constant in the impurity seeding scenario, indicating that detachment does not significantly impact turbulence there. However, a strong reduction in the dominant outboard fluctuation phase velocity is observed that deviates from the previous interpretation of neoclassical radial electric field changes, showing that the core plasma is not completely unaffected. In the density ramp and power starvation scenarios, undesirable and irregular large-scale events arise clearly in both diagnostic systems as the radiative fraction is increased. Impurity seeding therefore seems to be a promising strategy on W7-X to achieve detachment without significantly altering core turbulence, especially when targeting a specific operating point in core density and heating power.

Wendelstein 7-X↗

DOE OSTI2025

Adaptive Linear State Estimation for Unbalanced Distribution System

The inclusion of PMU functionality in distribution relays enables the implementation of a linear state estimator (LSE) in Distribution Systems (DS). However, the unbalanced topology and phase coupling in distribution lines necessitate modifications to the LSE formulation. Additionally, the higher fault frequency in distribution systems requires a state estimation approach that is resilient to contingencies. This work proposes an adaptive linear state estimation algorithm tailored for unbalanced distribution systems with single-phase and two-phase laterals. Furthermore, a modified Optimal PMU Placement (OPP) strategy is introduced to ensure full observability in distribution systems with single-phase and two-phase buses. To maintain adaptability to topology changes, the state estimator incorporates circuit breaker status data provided by PMUs, ensuring robust performance during topology changes triggered by faults. The performance of the algorithm is verified on the IEEE 13-bus, 34-bus, and 123-bus systems.

PMUs↗