Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FOAMED MATERIAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Radial Inertia Effect on Dynamic Compressive Response of Polymeric Foam Materials

Polymeric foams have been extensively used in shock isolation applications because of their superior shock or impact energy absorption capability. However, as a type of soft condensed matter, the highly nonlinear, heterogeneous, and dissipative behavior of polymeric foams may result in an ineffective mitigation or isolation to shock/blast loading. To meet certain desired shock mitigation or isolation requirements, the polymeric foams need to be experimentally characterized to obtain their intrinsic material response. However, radial inertia during dynamic compression has become a severe issue and needs to be fully understood. In this study, we developed an analytical method to calculate the additional stress induced by radial inertia in a polymeric foam specimen. The radial inertia is generally caused by Poisson’s effect and associated with three different mechanisms – axial strain acceleration, large deformation, and Poisson’s ratio change. In conclusion, the effect of Poisson’s ratio change during deformation on radial inertia was specifically investigated for hyperelastic foam materials, and verified with experimental results obtained from Kolsky compression bar tests on a silicone foam.

36 MATERIALS SCIENCE↗

Calibrating the Abaqus Crushable Foam Material Model using UNM Data

Triaxial test data from the University of New Mexico and uniaxial test data from W-14 is used to calibrate the Abaqus crushable foam material model to represent the syntactic foam comprised of APO-BMI matrix and carbon microballoons used in the W76. The material model is an elasto-plasticity model in which the yield strength depends on pressure. Both the elastic properties and the yield stress are estimated by fitting a line to the elastic region of each test response. The model parameters are fit to the data (in a non-rigorous way) to provide both a conservative and not-conservative material model. The model is verified to perform as intended by comparing the values of pressure and shear stress at yield, as well as the shear and volumetric stress-strain response, to the test data.

36 MATERIALS SCIENCE↗

Developing Microalgae-Based Non-Isocyanate Polyurethane Foam Materials

Polyurethane is a versatile material with a wide range of applications in the production of foam products such as car seats, mattresses, footwear, insulation foam, and more. The traditional process for producing polyurethane foam involves the fast reaction of isocyanate with water, which generates CO2 as a blowing agent. However, the use of isocyanate has raised concerns due to its potential for causing allergic reactions and aspiration symptoms. This has led to increased regulation of isocyanate, leading to a growing interest in developing alternatives. Non-isocyanate polyurethane (NIPU) has emerged as a promising alternative to traditional toxic PU production. The most promising approach for producing NIPU is the aminolysis of cyclic carbonate with diamine. The NIPU produced through this process has a polyhydroxyurethane structure, which is similar to traditional PU chemistry. We have demonstrated that microalgal oil is a favored feedstock, as it can provide high reactivity for industrial applications. However, the NIPU production process does not generate gas, and a blowing agent is required to achieve the desired foam structure. One of the challenges in producing NIPU foam is to match the bubble formation and curing rates. We have developed a novel approach to producing NIPU foam that utilizes carbamate as a bifunctional blowing and crosslinking agent. We have used vegetable oil and microalgal oil as feedstocks to produce various NIPU for characterization. The development of microalgal NIPU provides an exciting opportunity for reducing the environmental impact of foam production and improving the safety of the materials used in the production process. The production of value-added NIPU foam can also drive down the cost of microalgal biorefinery, advancing the commercialization of microalgal biofuel.

algae↗

Secondary electron emission of reticulated foam materials

Complex material surfaces can reduce secondary electron emission (SEE) and sputtering via geometric trapping. In this work, the SEE yields for a range of open-cell reticulated carbon foam geometries are characterized using scanning electron microscopy. The total reduction in the SEE yield from carbon foams with a 3% volume fill density and 10–100 pores per inch (PPI) is shown to be between 23.5% and 35.0%. Contributions of a foam backplate are assessed by experimentally and analytically defining the critical parameter, transparency. The transparency of a foam is quantified and is shown to affect the primary electron angular dependence on the SEE yield. For the same thickness of 6 mm, it is found that higher PPI decreases foam transparency from 32% to 0% and reduces the SEE yield. The SEE yield from carbon foams is also shown to have weaker dependence on the morphology of the surface compared with fuzzes and velvets and less variation across individual sample surfaces due to the rigidity of their ligament structures and isotropic geometries.

Physics↗

Air-buoyant structures and vehicles

Air-buoyant structures, and vehicles incorporating air-buoyant structures, are provided. Hollow, air-buoyant structures may include a shell of ultra-low density aerogel material, foam material, or vapor-expanded material that is strong and stiff enough to withstand atmospheric pressure and lightweight enough to achieve buoyancy in air under evacuation. The shell may be reinforced with a suitable reinforcing material, such as helical nanofibers. The air-buoyant structures may also include vacuum pumps and valves operably connected to or integrated with the hollow shell. The vacuum pumps and valves may be configured to pump air out of the hollow shell and allow air back into the hollow shell to control buoyancy.

Beaux, II, Miles Frank↗

3D-Printing ‘Smarter’ Energy Absorbing Materials

Foams are, by nature, disordered materials studded with air pockets of varying sizes. Lack of control over the material’s architecture at the micrometer or nanometer scale can make it difficult to adjust the foam’s basic properties. But Eric Duoss and a team of Livermore researchers are using additive manufacturing to develop “smarter” silicone cushions. By architecting the structure at the micro scale, they are able to control macro-scale properties previously unachievable with foam materials.

36 MATERIALS SCIENCE↗

Dynamic characterization of frequency response of shock mitigation of a polymethylene diisocyanate (PMDI) based rigid polyurethane foam

Kolsky compression bar experiments were conducted to characterize the shock mitigation response of a polymethylene diisocyanate (PMDI) based rigid polyurethane foam, abbreviated as PMDI foam in this study. The Kolsky bar experimental data was analyzed in the frequency domain with respect to impact energy dissipation and acceleration attenuation to perform a shock mitigation assessment on the foam material. The PMDI foam material exhibits excellent performance in both energy dissipation and acceleration attenuation, particularly for the impact frequency content over 1.5 kHz. This frequency (1.5 kHz) was observed to be independent of specimen thickness and impact speed, which may represent the characteristic shock mitigation frequency of the PMDI foam material under investigation. The shock mitigation characteristics of the PMDI foam material were insignificantly influenced by the specimen thickness. As a result, impact speed did have some effect.

36 MATERIALS SCIENCE↗