Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FISSION FRAGMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Molecular Dynamics Simulation of Fission Fragment Damage in Nuclear Fuel and Surrogate Material

We have performed classical molecular dynamics simulations of swift heavy ion damage, typical of fission fragments, in nuclear fuel (UO2) for energy deposition per unit length of 3.9 keV/nm. We did not observe amorphization. The damage mainly consisted of isolated point defects. Only about 1% of the displacements occur on the uranium sublattice. Oxygen Frenkel pairs are an order of magnitude more numerous than uranium Frenkel pairs in the primary damage state. In contrast, previous results show that the ratio of Frenkel pairs on the two sublattices is close to the stoichiometric ratio in ceria. These differences in the primary damage state may lead to differences in radiation response of UO2 and CeO2.

Molecular dynamics, radiation damage in materials,↗
DOE OSTI2021

Extension of the Hauser-Feshbach fission fragment decay model to multichance fission

The Hauser-Feshbach fission fragment decay model, HF 3 D, which calculates the statistical decay of fission fragments, has been expanded to include multichance fission, up to neutron incident energies of 20 MeV. The deterministic decay takes as input prescission quantities—fission probabilities and the average energy causing fission—and postscission quantities—yields in mass, charge, total kinetic energy, spin, and parity. From these fission fragment initial conditions, the full decay is followed through both prompt and delayed particle emissions, allowing for the calculation of prompt neutron and γ properties, such as multiplicity and energy distributions, both independent and cumulative fission yields, and delayed neutron observables. Here, we describe the implementation of multichance fission in the HF 3 D model, and show an example of prompt and delayed quantities beyond first-chance fission, using the example of neutron-induced fission on 235 U. This expansion represents significant progress in consistently modeling the emission of prompt and delayed particles from fissile systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Total absorption spectroscopy of fission fragments relevant for reactor antineutrino spectra

Here, the accurate determination of reactor antineutrino spectra remains a very active research topic for which new methods of study have emerged in recent years. Indeed, following the long-recognized reactor anomaly (measured antineutrino deficit in short baseline reactor experiments when compared with spectral predictions), the three international reactor neutrino experiments Double Chooz, Daya Bay and Reno have recently demonstrated the existence of spectral distortions in their measurements with respect to the same predictions. These spectral predictions were obtained through the conversion of integral beta-energy spectra obtained at the ILL research reactor. Several studies have shown that the underlying nuclear physics required for the conversion of these spectra into antineutrino spectra is not totally understood. An alternative to such converted spectra is a complementary approach that consists of determining the antineutrino spectrum by means of the measurement and processing of nuclear data. The beta properties of some key fission products suffer from the pandemonium effect which can be circumvented by the use of the Total Absorption Gamma-ray Spectroscopy technique (TAGS). The two main contributors to the Pressurized Water Reactor antineutrino spectrum in the region where the spectral distortion has been observed are 92 Rb and 142 Cs, which have been measured at the radioactive beam facility of the University of Jyvaskyla in two TAGS experiments. We present the results of the analysis of the TAGS measurements of the β-decay properties of 92 Rb along with preliminary results on 142 Cs and report on the measurements already performed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

DEATH-STAR: Silicon and photovoltaic fission fragment detector arrays for light-ion induced fission correlation studies

Here, the Direct Excitation Angular Tracking pHotovoltaic-Silicon Telescope ARray (DEATH-STAR) combines a series of 12 silicon detectors in a ΔE–E configuration for charged particle identification with a large-area array of 56 photovoltaic (solar) cells for detection of fission fragments. The combination of many scattering angles and fission fragment detectors allows for an angular-resolved tool to study reaction cross sections using the surrogate method, anisotropic fission distributions, and angular momentum transfers through stripping, transfer, inelastic scattering, and other direct nuclear reactions. The unique photovoltaic detectors efficiently detect fission fragments while being insensitive to light ions and have a timing resolution of 15.63±0.37 ns. Alpha particles are detected with a resolution of 35.5 keV 1σ at 7.9 MeV. Measured fission fragment angular distributions are also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

The Extension of the Hauser-Feshbach Fission Fragment Decay Model to Multi-chance Fission and its Application to 239 Pu

The Hauser-Feshbach fission fragment decay model, HF3D, calculates the statistical decay of fission fragments through both prompt and delayed neutron and γ-ray emissions in a deterministic manner. While previously limited to the calculation of only first-chance fission, the model has recently been extended to include multi-chance fission, up to neutron incident energies of 20 MeV. The deterministic decay takes as input prescission quantities–fission probabilities, pre-fission neutron energies, and the average energy causing fission– and post-scission quantities–yields in mass, charge, total kinetic energy, spin, and parity. From those fission fragment initial conditions, the full decay is followed through both prompt and delayed particle emissions. The evaporation of the prompt neutrons and γ rays is calculated through the Hauser-Feshbach statistical theory, taking into account the competition between neutron and γ-ray emission, conserving energy, spin, and parity. The delayed emission is taken into account using time-independent calculation using decay data. This whole formulation allows for the calculation of prompt neutron and γ-ray properties, such as multiplicities and energy distributions, both independent and cumulative fission yields, and delayed neutron observables, in a consistent framework. Here, we describe the implementation of multi-chance fission into the HF 3 D model, and show an example of prompt and delayed quantities beyond first-chance fission, using the example of neutron-induced fission on 239 Pu. This expansion represents significant progress in consistently modeling the emission of prompt and delayed particles from fissile systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Correlations Between Fission Fragment and Neutron Anisotropies in Neutron-Induced Fission

Several sources of angular anisotropy for fission fragments and prompt neutrons have been studied in neutron-induced fission reactions. These include kinematic recoils of the target from the incident neutron beam and the fragments from the emission of the prompt neutrons, preferential directions of the emission of the fission fragments with respect to the beam axis due to the population of particular transition states at the fission barrier, and forward-peaked angular distributions of pre-equilibrium neutrons which are emitted before the formation of a compound nucleus. In addition, there are several potential sources of angular anisotropies that are more difficult to disentangle: the angular distributions of prompt neutrons from fully accelerated fragments or from scission neutrons, and the emission of neutrons from fission fragments that are not fully accelerated. Here, we study the effects of the first group of anisotropy sources, particularly exploring the correlations between the fission-fragment anisotropy and the resulting neutron anisotropy. While kinematic effects were already accounted for in our Hauser-Feshbach Monte Carlo code cgmf, anisotropic angular distributions for the fission fragments and pre-equilibrium neutrons resulting from neutron-induced fission on 233,234,235,238 U, 239,241 Pu, and 237 Np have been introduced for the first time. The effects of these sources of anisotropy are examined over a range of incident neutron energies, from thermal to 20 MeV, and compared with experimental data from the Chi-Nu liquid scintillator array. The anisotropy of the fission fragments is reflected in the anisotropy of the prompt neutrons, especially as the outgoing energy of the prompt neutrons increases, allowing for an extraction of the fission-fragment anisotropy to be made from a measurement of the neutrons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Fission fragment angular anisotropy in neutron-induced fission of U 235 measured with a time projection chamber

Fission fragment angular distributions can provide an important constraint on fission theory, improving predictive fission codes, and are a prerequisite for a precise ratio cross section measurement. Available anisotropy data are sparse, especially at neutron energies above 5 MeV. For the first time, a three-dimensional tracking detector is employed to study fragment emission angles and provide a direct measurement of angular anisotropy. The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration has deployed the fission time projection chamber to measure nuclear data with unprecedented precision. The fission fragment anisotropy of 235 U has been measured over a wide range of incident neutron energies from 180 keV to 200 MeV; a careful study of the systematic uncertainties complement the data.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Neutron-induced fission fragment angular distributions, anisotropy, and linear momentum transfer measured with the NIFFTE fission time projection chamber

The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration has performed measurements with a fission time projection chamber (fissionTPC) to study the fission process by reconstructing full three-dimensional tracks of fission fragments and other ionizing radiation. The amount of linear momentum imparted to the fissioning nucleus by the incident neutron can be inferred by measuring the opening angle between the fission fragments. Using this measured linear momentum, fission fragment angular distributions can be converted to the center-of-mass frame for anisotropy measurements. Angular anisotropy is an important experimental observable for understanding the quantum mechanical state of the fissioning nucleus and vital to determining detection efficiency for cross section measurements. Neutron linear momentum transfer to fissioning 235 U, 238 U, and 239Pu and fission fragment angular anisotropy of 235 U and 238 U as a function of neutron energies in the range 130 keV–250 MeV are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1979

Distribution functions in plasmas generated by a volume source of fission fragments

The role played by fission fragments and electron distribution functions in nuclear pumped lasers is considered and procedures for their calculations are outlined. The calculations are illustrated for a He-3/Xe mixture where fission is provided by the He-3(n,p)H-3 reaction. Because the dominant ion in the system depends on the Xe fraction, the distribution functions cannot be determined without the simultaneous consideration of a detailed kinetic model. As is the case for wall sources of fission fragments, the resulting plasmas are essentially thermal but the electron distribution functions are non-Maxwellian.

Deese, J. E.↗
DOE OSTI2022

Boson Fermion Nucleus Explanation for Fission Fragment Anisotropy: Monograph #13

Since 1952, anisotropy has been observed in the paths of fission fragments following the assimilation of an incident neutron or photon in the nucleus. Fission fragment flux favors certain angles relative to the path of the incident particle, constituting anisotropy. The amount of anisotropy is dependent on the energy of the incident particle. Fission fragment anisotropy can be explained by the disruption of nuclear structure combined with the requirement of a specific rotational orientation in theta and phi of that structure relative to the incident neutron or photon flux. A specific and limited area in the nucleus can assimilate the incident particle and induce upset within the structure, followed by scission and fission of the nucleus. The orientation and nature of the structure upset dictates fission fragment trajectory and is responsible for fission fragment anisotropy. This concept can be explained and supported by the theory of boson fermion nucleus (BFN) structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Fission-fragment excitation energy sharing beyond scission

A simplified, though realistic, model describing two receding and accelerating fission fragments, due to their mutual Coulomb repulsion, shows that fission fragments share excitation energy well after they ceased to exchange nucleons. Here, this mechanism leads to a lower total kinetic energy of the fission fragments, particularly if the pygmy resonances in the fission fragments are excited. Even though the emphasis here is on fission, similar arguments apply to fragments in heavy-ion reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Anisotropy in fission fragment and prompt neutron angular distributions

Several physics mechanisms can lead to the deviation from an isotropic angular distribution for both fission fragments and the neutrons that are emitted during the fission event. Two of these effects have recently been implemented into CGMF, the Monte Carlo fission event generator developed at Los Alamos National Laboratory: angular distribution sampling for fission fragments and pre-equilibrium neutrons (those emitted before the compound nucleus forms). Using these new developments, we show that the anisotropy of the neutrons reflects the anisotropy of the fission fragments, in particular as the outgoing energy of neutrons increases. Correlations between the fission fragment and neutron anisotropies could be used to extract the fission fragment anisotropy from the neutron angular distributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Instrumentation for correlated prompt n – γ emission studies in coincidence with fission fragments

Recent theoretical and experimental results have brought renewed interest and focus on the topic of fission fragment angular momentum. Measurements of neutrons and rays in coincidence with fission fragments remain the most valuable tool in the exploration of fission physics. To achieve these scientific goals, we have developed a system that combines a state-of-the-art fission fragment detector and n – γ radiation detectors. A new twin Frisch-gridded ionization chamber has been designed and constructed for use with a spontaneous fission source and an array of forty trans-stilbene organic scintillators (FS-3) at Argonne National Laboratory. The new ionization chamber design we present in this work aims at minimizing particle attenuation in the chamber walls, and provides a compact apparatus that can be fit inside existing experimental systems. The ionization chamber is capable of measuring fission fragment masses and kinetic energies, whereas the FS-3 provides neutron and γ-ray multiplicities and spectra. Here, the details of both detector assemblies are presented along with the first experimental results of this setup. Planned event-by-event analysis and future experiments are briefly discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

High Resolution Fission Fragment Spectroscopy with Superconducting Microcalorimeters

Sub-1 AMU mass determination is important for determining fission yields and neutron multiplicity, which are necessary inputs for fission models. Fission models can improve spent nuclear waste stream analysis and nuclear fuel burnup determination. Here, to achieve this goal, we have used superconducting microcalorimeter detectors to directly measure the energy of fission fragments from the spontaneous fission of 252 Cf. With a fiber coupled LED pulser setup we demonstrate that we can reach a relative energy resolution of 0.1% and better for photon pulses with energies above 60 MeV. This instrument, in conjunction with time-of-flight (TOF) measurement, would allow for sub-1 atomic mass unit (AMU) mass determination of fission fragments in a future beamline application.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Implementing and testing theoretical fission fragment yields in a Hauser-Feshbach statistical decay framework

Here, we implement fission fragment yields, calculated using Brownian shape-motion on a macroscopic-microscopic potential energy surface in six dimensions, into the Hauser-Feshbach statistical decay code CGMF. This combination allows us to test the impact of utilizing theoretically-calculated fission fragment yields on the subsequent prompt neutron and γ-ray emission. We draw connections between the fragment yields and the total kinetic energy TKE of the fission fragments and demonstrate that the use of calculated yields can introduce a difference in the $\langle$TKE$\rangle$ and, thus, the prompt neutron multiplicity v, as compared with experimental fragment yields. We deduce the uncertainty on the $\langle$TKE$\rangle$ and v from this procedure and identify possible applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2013

Feasibility of Traveling Wave Direct Energy Conversion of Fission Reaction Fragments

Fission fragment direct energy conversion has been considered in the past for the purpose of increasing nuclear power plant efficiency and for advanced space propulsion. Since the fragments carry electric charge (typically in the order of 20 e) and have 100 MeV-range kinetic energy, techniques utilizing very high-voltage DC electrodes have been considered. This study is focused on a different approach: the kinetic energy of the charged fission fragments is converted into alternating current by means of a traveling wave coupling scheme (Traveling Wave Direct Energy Converter, TWDEC), thereby not requiring the utilization of high voltage technology. A preliminary feasibility analysis of the concept is introduced based on a conceptual level study and on a particle simulation model of the beam dynamics.

Tarditi, A. G.↗
NASA NTRS2014

Studies of Fission Fragment Rocket Engine Propelled Spacecraft

The NASA Office of Chief Technologist has funded from FY11 through FY14 successive studies of the physics, design, and spacecraft integration of a Fission Fragment Rocket Engine (FFRE) that directly converts the momentum of fission fragments continuously into spacecraft momentum at a theoretical specific impulse above one million seconds. While others have promised future propulsion advances if only you have the patience, the FFRE requires no waiting, no advances in physics and no advances in manufacturing processes. Such an engine unequivocally can create a new era of space exploration that can change spacecraft operation. The NIAC (NASA Institute for Advanced Concepts) Program Phase 1 study of FY11 first investigated how the revolutionary FFRE technology could be integrated into an advanced spacecraft. The FFRE combines existent technologies of low density fissioning dust trapped electrostatically and high field strength superconducting magnets for beam management. By organizing the nuclear core material to permit sufficient mean free path for escape of the fission fragments and by collimating the beam, this study showed the FFRE could convert nuclear power to thrust directly and efficiently at a delivered specific impulse of 527,000 seconds. The FY13 study showed that, without increasing the reactor power, adding a neutral gas to the fission fragment beam significantly increased the FFRE thrust through in a manner analogous to a jet engine afterburner. This frictional interaction of gas and beam resulted in an engine that continuously produced 1000 pound force of thrust at a delivered impulse of 32,000 seconds, thereby reducing the currently studied DRM 5 round trip mission to Mars from 3 years to 260 days. By decreasing the gas addition, this same engine can be tailored for much lower thrust at much higher impulse to match missions to more distant destinations. These studies created host spacecraft concepts configured for manned round trip journeys. While the vehicles are very large, they are primarily made up of a habitat payload on one end, the engine on the opposite end and a connecting spine containing radiator acreage needed to reject the heat of this powerful, but inefficient engine. These studies concluded that the engine and spacecraft are within today's technology, could be built, tested, launched on several SLS launchers, integrated, checked out, maintained at an in-space LEO base, and operated for decades just as Caribbean cruise ships operate today. The nuclear issues were found to be far less daunting that [than for] current nuclear engines. The FFRE produces very small amounts of radioactive efflux compared to their impulse, easily contained in an evacuated "bore-hole" test site. The engine poses no launch risk since it is simply a structure containing no fissionable material. The nuclear fuel is carried to orbit in containers highly crash-proofed for launch accidents from which it, in a liquid medium, is injected into the FFRE. The radioactive exhaust, with a velocity above 300 kilometers per second rapidly leaves the solar system.

Werka, Robert O.↗
DOE OSTI2019

Effects of annealing on fission fragment release from electrodeposited Cf-252 thin-films

In this work, samarium thin-films doped with a 252 Cf radiotracer were used to study the effects of annealing on the release of fission fragments from electrodeposited films. An ammonium acetate molecular plating technique was utilized to perform the depositions. The fission fragment yields were measured using a unique technique involving the exposure of aluminum foils to the deposited material for a fixed time followed by gamma-ray spectroscopy to determine the rate at which the fission fragments implanted into the foils. Annealing of the electrodeposited films was found to have no effect on the release of fission fragments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗